muele-marlin

Author	SHA1	Message	Date
Scott Lahteine	d95ee0f003	Merge pull request #8551 from revilor/bugfix-2.0.x MK2_MULTIPLEXER does not require E2/E3 stepper pins	2017-11-24 17:16:23 -06:00
Scott Lahteine	80ada58818	One fewer function call in probe_pt	2017-11-24 17:10:38 -06:00
oliver	92a0dc552a	MK2_MULTIPLEXER does not require E2/E3 stepper pins	2017-11-24 23:56:39 +01:00
Scott Lahteine	b49acce035	Tweaks for lcd_external_control	2017-11-24 15:53:25 -06:00
Scott Lahteine	1ef1052ae1	Phatter arrows for Z offset overlay	2017-11-24 15:53:25 -06:00
Scott Lahteine	5926c9c97b	Followup for MESH_EDIT_GFX_OVERLAY	2017-11-24 15:53:25 -06:00
Scott Lahteine	ab03a31cc9	Patch G0/G1 for NANODLP_Z_SYNC	2017-11-24 14:11:12 -06:00
Scott Lahteine	a766dfb3b1	Merge pull request #8536 from thinkyhead/bf2_nanodlp_z_move_sync [2.0.x] Implement NANODLP_Z_SYNC for 2.0.x	2017-11-24 13:11:14 -06:00
Scott Lahteine	01e207213f	Fix MK2_MULTIPLEXER stepper indirection	2017-11-24 12:49:28 -06:00
Roxy-3D	ec04cf27d3	Fix the G26 out of scope identifiers in the v2.0.0 branch (#8543 ) These changes may need to be warmed over. I tried to fix things with the least amount of disruption. I just wanted to get the bugfix_v2.0.0 branch working for people again.	2017-11-24 10:39:56 -06:00
Scott Lahteine	dc82babe8e	Implement NANODLP_Z_SYNC for 2.0.x	2017-11-24 00:28:06 -06:00
Scott Lahteine	c6b0c104bb	Adapt G26 to work for all meshes	2017-11-23 22:31:37 -06:00
Scott Lahteine	5ce7f23afa	Config option G26_MESH_VALIDATION for all meshes	2017-11-23 21:43:23 -06:00
Scott Lahteine	c19eb33408	Move G26 to gcode sub-folder	2017-11-23 21:43:23 -06:00
Scott Lahteine	a03f93bab4	Fix fan kickstart	2017-11-23 21:42:45 -06:00
Scott Lahteine	9e3c41f9e8	Tweak fan kickstart / speed code	2017-11-23 15:20:35 -06:00
GMagician	118ac61e59	[2.0.x] Tool change bad behaviour fix Previous fix did not work as expected when axeis not homed. It raise Z but never return to original position	2017-11-22 20:24:03 -06:00
Scott Lahteine	c35d27f77c	Merge pull request #8299 from tcm0116/2.0.x-BIQU_BQ111-A4 [2.0.x] Add BIQU BQ111-A4 board	2017-11-22 19:16:04 -06:00
Scott Lahteine	1685cd193b	Tweak char_mode init	2017-11-22 19:12:08 -06:00
Scott Lahteine	9406c87a97	Fix up LCD init / charset	2017-11-22 18:22:55 -06:00
Thomas Moore	fa577392b2	Add BIQU BQ111-A4 board	2017-11-22 16:34:59 -06:00
Scott Lahteine	c2fc78c3a8	#ifndef => #if !PIN_EXISTS	2017-11-22 16:28:52 -06:00
Scott Lahteine	c613a1ed38	Fix indentation, stepper.h dependency, etc.	2017-11-22 14:55:30 -06:00
teemuatlut	f011a32771	Board definitions for Ultratronics Pro v1.0	2017-11-22 14:55:24 -06:00
Bob-the-Kuhn	9dad534f02	fixed	2017-11-21 21:37:20 -06:00
Scott Lahteine	4371345cbe	Don't re-init graphical LCD after boot screen Followup to `13a3fb1acc`	2017-11-21 18:23:39 -06:00
Scott Lahteine	56c02b7f59	Shift register buttons question Can LCD shift registers keep up with faster MCUs?	2017-11-21 16:12:40 -06:00
Scott Lahteine	3994d3b935	General cosmetic LCD	2017-11-21 16:12:40 -06:00
Scott Lahteine	617993d0ea	Patch for !!TEST (was _BV once?)	2017-11-21 16:12:08 -06:00
Scott Lahteine	3269d8dd62	Tweak M42 var	2017-11-21 16:12:08 -06:00
Mateusz Krawczuk	bb1a6eea88	Remove pin count check for MIGTHYBOARD_REVE Remove assert and unused code since it is implemented in pinsDebug_plus_70.h	2017-11-21 14:38:02 +01:00
Scott Lahteine	1ce0fb336b	Patch Max7219_LED_Set input args	2017-11-20 21:15:15 -06:00
GMagician	a61127a421	[2.0.x] tool change bad behaviours This will solve 2 issues on tool change. 1) when no home is done ("no_move" is set) tool change should never move X & Y because... I don't know where I am...only Z should be adjusted to avoid bed collision if other nozzle is lower than current. Since no move no bed level matrix should be applied 2) When SWITCHING_NOZZLE is enabled and system is homed there are two movements to go to destination, but first can move Z to older position and then crash on the bed	2017-11-20 16:34:55 -06:00
Vitaliy Sapyanov	e2724c68ab	Update pins_RURAMPS4D.h Add and bugfix pins	2017-11-20 15:36:13 -06:00
Scott Lahteine	9770062309	Merge pull request #8463 from thinkyhead/bf2_32bit_M42 [2.0.x] Updates to Anet A8 configurations	2017-11-20 15:12:30 -06:00
Scott Lahteine	3066655727	Try port*100+pin, fix config dependency	2017-11-20 13:58:23 -06:00
Scott Lahteine	ba8bc7ea80	Cosmetic tweaks	2017-11-20 13:58:02 -06:00
Scott Lahteine	f409147116	Fix P2_04, P2_05	2017-11-20 13:58:02 -06:00
Bob-the-Kuhn	a28ccabe2a	M42 P1.20 fix	2017-11-20 13:58:02 -06:00
Unknown	33912fa7e8	Update Temperature::setPwmFrequency prototype to match source Introduced with #8446	2017-11-20 01:50:41 -08:00
Scott Lahteine	b9327a4d16	Misc. general cleanup	2017-11-19 15:43:39 -06:00
Scott Lahteine	8836623e0f	Fix `sq`/`min`/`max` macros after platform headers	2017-11-19 15:43:39 -06:00
Scott Lahteine	fe4f009fdd	32-bit unless…	2017-11-19 15:43:38 -06:00
Scott Lahteine	25af9decfe	Remove enum.h include of MarlinConfig.h	2017-11-19 15:43:38 -06:00
Scott Lahteine	1d4571b88d	Dependency adjustments	2017-11-19 15:43:38 -06:00
Scott Lahteine	550f1025f0	Try using <Arduino.h> everywhere	2017-11-19 14:23:02 -06:00
Scott Lahteine	c0000a0cdc	Move servo code to modules/servo.*	2017-11-19 14:23:02 -06:00
Scott Lahteine	81bc428b48	Don't compile custom u8g without DOGLCD	2017-11-19 13:58:38 -06:00
Bob-the-Kuhn	c14000775b	PWM fixes, slow down fan update include LPC1768 syntax for M42 couple more pin_t changes consistency change M42 to R, P format Revert "change M42 to R, P format" This reverts commit 01f12f579ec9ccc1bb9126e68d2c86449e9b7edf.	2017-11-18 07:05:50 -06:00
Scott Lahteine	60adc6ff02	Display filwidth ratio in terms of E mm	2017-11-18 07:01:49 -06:00
Scott Lahteine	6e533748eb	Fixes #8472	2017-11-18 05:15:55 -06:00
Scott Lahteine	485abb023b	Merge pull request #8456 from thinkyhead/bf2_wednesday_tweaks [2.0] No retroactive adjustment with M851 Z	2017-11-18 04:49:53 -06:00
Scott Lahteine	3bba7d60f3	No retroactive changes with M851 Z If using babystep to adjust the Z probe offset, the axis will move and the mesh will be updated at the same time, causing a doubling of the Z offset over the rest of the print. To correct for this, the current Z position would need to be modified in the opposite direction, canceling out the additional Z offset added to the mesh. This would be confusing to users, and moreover it would not be accurate without also taking the current Z fade level and current Z height into account. It might make sense to change the mesh in the case where no babystepping is taking place, but this could be considered an undesirable side-effect of changing the `zprobe_zoffset`. One way to remedy this would be to return to storing the mesh with `zprobe_zoffset` included, then subtracting `zprobe_zoffset` from the returned Z value. Thus, a babystep moving the Z axis up 1mm would subtract 1 from `zprobe_zoffset` while adding 1 to all mesh Z values. Without including the `zprobe_zoffset` in the `z_values` there is no safe way to alter the mesh in conjunction with babystepping, although it's fine without it.	2017-11-18 03:36:39 -06:00
Scott Lahteine	32512332df	Apply some formatting	2017-11-18 03:12:30 -06:00
Scott Lahteine	7dacc999b9	Remove obsolete show_bootscreen var	2017-11-17 17:01:43 -06:00
Roxy-3D	9729528d13	Update UBL's Delta Probable locations This is a non-intuitive change. @oldmcg says in this post https://github.com/MarlinFirmware/Marlin/issues/7572#issuecomment-340641207 that using DELTA_PRINTABLE_RADIUS is better than DELTA_PROBABLE_RADIUS for setting the probe limits. This is because the automatic probe code checks all locations for being reachable by the probe prior to doing the probe.	2017-11-17 16:44:57 -06:00
Scott Lahteine	d48cb6bf41	Apply coding standards to Max7219	2017-11-17 15:32:21 -06:00
Scott Lahteine	bd8bcf06e7	Updates to Anet A8 configurations Based on #8426	2017-11-16 23:19:36 -06:00
Bob-the-Kuhn	7eea000f4b	E0 auto fan fixes	2017-11-16 18:42:56 -06:00
Scott Lahteine	b2dda096fe	Fix FILAMENT_LCD_DISPLAY for disabled state	2017-11-16 16:57:48 -06:00
Scott Lahteine	1e8afb66b7	Fix a planner comment	2017-11-16 16:57:47 -06:00
Scott Lahteine	50f09cc029	Miscellaneous cleanup	2017-11-16 00:47:16 -06:00
Scott Lahteine	63257dc083	Fix M503 output for M145 Fixes #7978	2017-11-15 04:00:18 -06:00
Scott Lahteine	0918dae66e	Add OV() macro for use in thermistor tables	2017-11-15 03:15:18 -06:00
Scott Lahteine	24057270a3	Merge pull request #8420 from RowanMeara/rm-dithering-2.0.x [2.0.x] Fix Software Fan PWM	2017-11-15 02:30:19 -06:00
Scott Lahteine	5079a02c90	Add HAL_SERVO_LIB to HAL_Due.h	2017-11-15 02:07:01 -06:00
Scott Lahteine	9c3761047e	Merge pull request #8434 from thinkyhead/bf2_fix_M32_subroutines [2.0] Fix 'M32 P' subroutines	2017-11-15 01:15:02 -06:00
Scott Lahteine	e0d367f1fb	Fix M32 P subroutine handling	2017-11-15 00:44:21 -06:00
Scott Lahteine	9f8b4c5ee8	Patch SD lib files for readability	2017-11-15 00:44:21 -06:00
Scott Lahteine	2c8c30437e	Fix parser parameter value handling	2017-11-14 23:20:33 -06:00
RowanMeara	6131533157	Change dithering behavior to intended.	2017-11-14 00:47:07 -08:00
Scott Lahteine	e70b44dc0b	Make sure leveled[] is defined for later use	2017-11-14 02:13:38 -06:00
Scott Lahteine	54774841ba	Merge pull request #8416 from thinkyhead/bf2_M114_DETAIL [2.0] Add M114_DETAIL to Configuration_adv.h	2017-11-14 00:28:55 -06:00
Scott Lahteine	009e3a7aa7	Add M114_DETAIL to Configuration_adv.h	2017-11-14 00:03:17 -06:00
Scott Lahteine	6d6c3b1e97	Fix up REPRAPWORLD_KEYPAD defines	2017-11-13 22:14:54 -06:00
Scott Lahteine	3f0a982b8c	Move Filament Width Sensor to Configuration_adv.h	2017-11-13 21:05:57 -06:00
Scott Lahteine	b76e173205	Move test extrusion options under G26	2017-11-13 21:05:57 -06:00
Scott Lahteine	14ebedca27	Drop unused LARGE_FLASH option	2017-11-13 15:44:24 -06:00
Scott Lahteine	b7feb53e8a	Support for Extrudrboard in Printrboard Rev.F	2017-11-13 15:44:23 -06:00
Scott Lahteine	91baca6abb	Patches for compiler warnings/errors	2017-11-13 04:43:47 -06:00
Scott Lahteine	2f73dec077	Apply native workspace fixes for G92, G53-59	2017-11-13 02:09:12 -06:00
Scott Lahteine	04abd8d459	Improve and clarify M428 code	2017-11-13 02:09:11 -06:00
Dave Johnson	c009a990e4	[2.0.x] Fix some 8-bit Teensyduino compile warnings (#8385 ) * Fix some 8-bit Teensyduino compile warnings -Override Teensyduino legacy NOT_A_PIN 127 define -some fixups for Printrboard_RevF pins * Proper cleanup of Printrboard Rev.F pins * Apply LCD fixes to Printrboard v1	2017-11-13 01:07:59 -06:00
Scott Lahteine	e8e92f8969	No leveling data in M114 if no leveling is enabled	2017-11-12 23:03:38 -06:00
Scott Lahteine	f5d210c35c	Fix report_current_position	2017-11-12 23:02:53 -06:00
Roxy-3D	faaae7a1b2	Provide more clearance for BL-Touch probe	2017-11-12 13:11:22 -06:00
Scott Lahteine	06ee6584fd	Remove offsets from soft endstops, tool change	2017-11-11 22:47:38 -06:00
Scott Lahteine	c938273bd5	Coding standard patch of M290	2017-11-11 22:14:21 -06:00
Scott Lahteine	98c1265e3b	Disable laser power when PWM goes to 0	2017-11-11 22:00:22 -06:00
Scott Lahteine	d4a1154c25	Use do_blocking_move_to where possible	2017-11-10 20:55:23 -06:00
Scott Lahteine	36426af564	Merge pull request #8356 from tcm0116/2.0.x-M600 [2.0.x] Normalize load/unload length in M600	2017-11-10 19:44:08 -06:00
Scott Lahteine	1ed86adf9c	Cleanup around updatePID	2017-11-10 19:27:34 -06:00
Scott Lahteine	75a58ee4b8	Fix position_is_reachable bug in waiting	2017-11-10 19:27:33 -06:00
LVD-AC	e334efb2a7	PROBE_MANUALLY etc.	2017-11-10 19:27:33 -06:00
Bob-the-Kuhn	b6415dc169	finish	2017-11-10 14:39:55 -06:00
Scott Lahteine	0efa66be0b	Updates to Traditional Chinese From @cheton at #8347	2017-11-10 04:52:20 -06:00
Scott Lahteine	cba9c1cf9e	Add pre-calculated planner.e_factor	2017-11-10 03:14:24 -06:00
Thomas Moore	600c85226e	Normalize load/unload length in M600	2017-11-10 02:31:46 -06:00
Scott Lahteine	81b91b3f9d	Clean up some trailing white-space	2017-11-10 02:31:04 -06:00
Roxy-3D	2f9848ede3	Correct gMax 1.5+ example file And... Keep both branches in synchronization.	2017-11-09 23:44:14 -06:00
Scott Lahteine	006dad4b52	Add pins_RURAMPS4D.h & change pins.h http://3dtoday.ru/blogs/svs0724/ruramps4d-ramps-for-adruino-due-the-pilot-shipment-available-for-zack/	2017-11-09 21:51:06 -06:00
Scott Lahteine	00514857e9	SBASE serial port -1, RAMPS spacing	2017-11-09 21:41:07 -06:00
Scott Lahteine	c66696c507	Merge pull request #8344 from tcm0116/2.0.x-delta_height [2.0.x] Add delta_height variable in lieu of using home_offset	2017-11-09 01:21:53 -06:00
Scott Lahteine	22e18fe832	Patch _manual_goto_xy for kinematics	2017-11-08 22:21:38 -06:00
Scott Lahteine	0cfb936dd1	Clarify some motion code	2017-11-08 22:15:55 -06:00
Thomas Moore	f34c3597dc	Add delta_height variable in lieu of using home_offset	2017-11-08 22:10:08 -06:00
Bob-the-Kuhn	d47fbf791b	Arduini IDE compatibility changes changed includes to make Arduino IDE happy	2017-11-08 20:49:49 -06:00
Scott Lahteine	95ea43bde4	Update XYZ dual stepper configurations	2017-11-08 20:31:43 -06:00
Scott Lahteine	b0b4a20930	Tweaks to core motion code	2017-11-08 20:09:09 -06:00
Scott Lahteine	8805e24cc7	Fix tilt_mesh_based_on_probed_grid output bug	2017-11-08 20:06:20 -06:00
Scott Lahteine	24437fbb13	Fix G26 Y argument bug	2017-11-08 19:20:10 -06:00
Scott Lahteine	09b05c9d79	Merge pull request #8321 from Bob-the-Kuhn/pins_re-arm 2.0.x - pins_RAMPS_RE_ARM.h - add mega2560 pin numbers	2017-11-08 13:11:13 -06:00
Scott Lahteine	e6788bb6ae	Fix get_destination_from_command for E	2017-11-08 12:54:00 -06:00
Roxy-3D	967104e1ce	Default Extrusion Settings were off a few lines in some of the example config files. (#8333 )	2017-11-08 11:56:00 -06:00
Bob-the-Kuhn	8875885a15	pins add old names fix typo re-write PWM section, add "not on Re-ARM" list	2017-11-08 11:11:38 -06:00
Roxy-3D	1c6e83c137	if !HAS_MESH we still need to do some motion! (#8328 ) * if !HAS_MESH we still need to do some motion! Thank You MagoKimbra ! * Ooops.... need #else and not #elif	2017-11-08 09:42:21 -06:00
Scott Lahteine	82f45c3e6a	Patch G33 misuse of PROBE_MANUALLY	2017-11-08 00:36:06 -06:00
Scott Lahteine	064e6fe60e	Remove debugging pin toggle from LCD code	2017-11-07 23:00:54 -06:00
Bob-the-Kuhn	0483a7df91	AVR RRD works LPC1768 VIKI2 & RRDFG are working looks like all SPIs are working library change sh1106 locks up fixed lockup, started I2C SW com pretty re-org restore a few files make library happy switched HAL version of rrd fix travis error travis error fixes another travis fix cleanup minor update one more correct spacing in platformio.ini	2017-11-07 18:40:29 -06:00
Scott Lahteine	96c9d715f3	Patch abuse of sprintf_P in G33	2017-11-07 17:33:50 -06:00
Roxy-3D	ed62c621d7	Fix G26 Circle Drawing. Add Default Extrusion Settings (#8313 ) - Fix G26 Circle Drawing. - Add default extrusion settings so machine can print lines on print bed - Yet to be done: Get LCD Menu's to use these settings.	2017-11-07 17:13:53 -06:00
Scott Lahteine	8fea26aa9d	Fix PID_autotune watch temp increase value	2017-11-07 15:51:48 -06:00
Scott Lahteine	2c099fd4c2	Update Thermal Protection Documentation	2017-11-07 15:46:44 -06:00
Colten Edwards	a6160916b0	[2.0] Fix M48 for delta printers/ABL compile issue (#8286 ) * fix M48 for delta printers fix M48 for delta printers. home printer if not already homed. * remove ENABLED(DELTA) remove ENABLED(DELTA) as it is not needed. * Update M48.cpp * abl needs queue.h without queue.h abl will not compile since there is a script that runs at the end of it and we need to queue it up.	2017-11-07 15:36:33 -06:00
Scott Lahteine	17ef0a513b	Update G92 for native workspace	2017-11-07 13:07:16 -06:00
Scott Lahteine	b4bf8928aa	German language updates Corresponding to #8306	2017-11-07 12:10:29 -06:00
Thomas Moore	73ca5345e1	Fix Delta EEPROM	2017-11-07 16:48:21 +00:00
Scott Lahteine	714d2b9bbc	Merge pull request #8297 from thinkyhead/bf2_M118_and_others [2.0] Fix M118, compiler warnings, etc.	2017-11-06 23:25:49 -06:00
Alexey Shvetsov	83555933aa	Add platformio support for stm32 (#8246 ) [2.0] Add platformio support for stm32	2017-11-06 23:03:59 -06:00
Scott Lahteine	85a62bbf46	Misc. fixes to compiler warnings, etc.	2017-11-06 22:57:05 -06:00
Scott Lahteine	e6aba99f16	Fix M118 parameters, with strict guideline	2017-11-06 22:57:01 -06:00
Scott Lahteine	e9b1944a67	Patch non-extended font option	2017-11-06 21:42:21 -06:00
Roxy-3D	6324b09934	Revert "Fix EEPROM crc (#8284 )" (#8292 ) This reverts commit `172c36f517`.	2017-11-06 19:52:05 -06:00
Rowan Meara	172c36f517	Fix EEPROM crc (#8284 )	2017-11-06 19:19:30 -06:00
Scott Lahteine	cc4d28b73c	Update bilinear for native workspace	2017-11-06 17:04:41 -06:00
Scott Lahteine	94c7205d64	Merge pull request #8281 from thinkyhead/bf2_alligator_dac [2.0] Use fastio for Alligator dac084s085, etc.	2017-11-06 12:16:18 -06:00
Scott Lahteine	2246316605	Fix name collision. timer_t => hal_timer_t	2017-11-05 19:31:07 -06:00
Jason Hitesman	4efaef7039	[2.0.x] Fix archim2 SSDS define (#8278 ) * Fix SSDS define * Update pins_ARCHIM2.h	2017-11-05 19:23:19 -06:00
Scott Lahteine	c8dfa26bc8	Use fastio for STM32F1 endstop interrupts	2017-11-05 19:20:28 -06:00
Scott Lahteine	185dec800b	Use fastio for HAL SPI EEPROM	2017-11-05 19:20:03 -06:00
Scott Lahteine	297666ea14	Use fastio for Alligator dac084s085	2017-11-05 19:14:42 -06:00
Scott Lahteine	c5d95d318b	Merge pull request #8249 from thinkyhead/bf2_nozzle_cleanup [2.0] Cleanup Nozzle class, fix XY vs Z move order	2017-11-05 18:51:11 -06:00
Scott Lahteine	7e2fee9d56	Merge pull request #8274 from tcm0116/2.0.x-re_arm_D8 [2.0.x] Correct RAMPS_D8_PIN for Re-ARM	2017-11-05 18:39:28 -06:00
Scott Lahteine	59c558d612	Merge pull request #8275 from GMagician/2.0.x-Typo-fix [2.0.x] typo fix (removed spaces)	2017-11-05 18:39:04 -06:00
Scott Lahteine	be73d5cc08	Cleanup Nozzle class, fix XY vs Z move order	2017-11-05 18:31:07 -06:00
GMagician	9e93b7ccbd	[2.0.x] removed spaces Removed spaces in array declaration	2017-11-05 20:42:48 +01:00
Thomas Moore	b91a822d7a	Correct RAMPS_D8_PIN for Re-ARM	2017-11-05 13:03:42 -06:00
studiodyne	d295f984e3	Update fwretract.cpp	2017-11-05 15:42:30 +01:00
Scott Lahteine	1b40e9c464	Implement CNC_COORDINATE_SYSTEMS	2017-11-04 22:28:46 -05:00
Scott Lahteine	1b42fba39b	Add CNC_COORDINATE_SYSTEMS to configs	2017-11-04 22:28:46 -05:00
Scott Lahteine	a22434508f	Match tweaks to G33 from 1.1	2017-11-04 22:28:46 -05:00
Scott Lahteine	c07bbd4154	Prettify some EEPROM code	2017-11-04 22:28:46 -05:00
Scott Lahteine	d6aa127c76	Remove I2CPEM workspace offset	2017-11-04 22:28:46 -05:00
Scott Lahteine	79772219ae	Fix Fan Multiplexer init	2017-11-04 22:28:46 -05:00
Scott Lahteine	ca7d36d9ed	RAMPS pins for ANET_KEYPAD_LCD	2017-11-04 21:22:53 -05:00
Colten Edwards	e0a6ee8da5	[2.0] Fix up G33, LPC1768 + SDCARD_SORT_ALPHA (#8250 ) * Update Conditionals_post.h * Add a cast to round() to convert to a unsigned int Add's a cast to round() so that it will compile properly. round() returns a float which must be cast to a integer for the following % operation. Use a unsigned int as a negative index to an array is wrong. Should never be more than 255 points allowing us to use a 8 bit cast. * Update G33.cpp	2017-11-04 18:04:18 -05:00
Scott Lahteine	dac1f6fe74	Tweaks to cubic_b_spline code style	2017-11-04 14:46:10 -05:00
Scott Lahteine	4df024d7b9	Merge pull request #8234 from thinkyhead/bf2_native_operation [2.0.x] Operate in Native Machine Space	2017-11-04 14:31:44 -05:00
Scott Lahteine	601ccded89	Fix case-insensitive config issue	2017-11-04 14:10:13 -05:00
Scott Lahteine	f8393a0908	Operate in Native Machine Space	2017-11-04 00:05:38 -05:00
Scott Lahteine	d83a9a53e8	Merge pull request #8220 from thinkyhead/bf2_serial_port_-1 [2.0] Add SERIAL_PORT -1 option for configurators	2017-11-03 15:25:12 -05:00
Scott Lahteine	93ba72ea83	Add SERIAL_PORT -1, set on SBASE, STM32F103RET6	2017-11-03 15:22:45 -05:00
Scott Lahteine	7e43dd1d23	Fix probes configuration url Based on #8241 by @machaj	2017-11-03 13:35:40 -05:00
AnHardt	ca0e4b4e96	Some cleanup around 'lcd_bootscreen()' and 'lcd_kill_screen()' Move 'lcd_bootscreen()' from `lcd_init()` to 'setup()' where it is cexecute exactly once. Saves 'bool show_bootscreen'. Move the call of 'lcd_custom_bootscreen()' to the begin of 'lcd_bootscreen()'. Move the delays into the related functions. Move the picture loop around 'lcd_kill_screen()' into the function.	2017-11-03 12:02:48 +01:00
Scott Lahteine	84b93d941f	Merge pull request #8178 from thinkyhead/bf2_config_tweak [2.0.x] Faster menu navigation for Anet A8	2017-11-03 04:49:17 -05:00
teemuatlut	70be4d206e	[2.0.x] UltiMachine Archim2 (#8190 ) * UltiMachine Archim2 support * SPI gets included by the library * Invert TMC2130 diag pin state * Clean up Archim2 pins * Update Archim2 config * FAN2 -> FAN1 * Cleanup * Add brief Archim installation instructions * Bring pins into compliance * Update 1.0 SD Detect pin for 1.1 * Update Configuration.h * Update pins_ARCHIM2.h	2017-11-03 04:48:15 -05:00
Scott Lahteine	f3deb37bdf	Merge pull request #8236 from thinkyhead/bf2_protect_M303 [2.0.x] M303 thermal runaway protection	2017-11-03 04:42:14 -05:00
Scott Lahteine	31f112cf58	Cleanup trailing whitespace	2017-11-03 04:07:45 -05:00
Scott Lahteine	2f9e42feb9	M303 thermal runaway protection	2017-11-03 03:57:46 -05:00
Scott Lahteine	e5ae545647	Remove ADCKey steps acceleration	2017-11-03 03:41:55 -05:00
Luc Van Daele	6827e243a0	[2.0.x] G33 magic numbers (#8171 ) * [2.0.x] G33 magic numbers * oops * Comments * oops * warning * better comment section * remarks * extra grids	2017-11-03 03:36:16 -05:00
Scott Lahteine	8735ae984b	Merge pull request #8227 from tcm0116/2.0.x-pin_mapping LPC1768: updates to use the new pin_t typedef	2017-11-03 03:10:19 -05:00
AnHardt	c72a0610b4	Fix watchdog in WATCHDOG_RESET_MANUAL mode AVR	2017-11-03 04:43:00 +01:00
Thomas Moore	13d839795c	LPC1768: updates to use the new pin_t typedef	2017-11-02 18:43:57 -05:00
Scott Lahteine	eb13b8d985	Add MKS Gen L board	2017-11-02 17:06:08 -05:00
Morten	063e957fc4	Update pins_MKS_SBASE.h (#8188 ) * Update pins_MKS_SBASE.h Deleted E_MUX2, not used. Changed #define LCD_PINS_D4 P0_14 // EXP1.5 to #define LCD_PINS_D4 P0_15 // EXP1.5, wrong in MKS's pinout schematic. Swapped TEMP_BED_PIN and TEMP_0_PIN port's, request from user, more logical... * Update pins_MKS_SBASE.h Moved MUX signals to J8 and re added MUX2, cleaner wiring..	2017-11-02 13:50:23 -05:00
Scott Lahteine	f7133e53fd	Fix case light off Addressing #8205	2017-11-01 21:22:15 -05:00
Scott Lahteine	0108d5181f	Allow asterisks in G-Code commands Addressing #6655	2017-10-31 21:20:41 -05:00
Scott Lahteine	34745b2183	Organize boards.h by architecture	2017-10-31 16:10:38 -05:00
android444	9cc1d8e312	[2.0.x] Support for SilverGate Board	2017-10-31 15:27:26 -05:00
Scott Lahteine	03e5369411	Faster menu navigation for Anet A8 Addressing #8166	2017-10-31 14:46:55 -05:00
Scott Lahteine	f1edf83720	Merge pull request #8187 from rafaljot/patch-5 Update InterruptVectors_Due.cpp	2017-10-31 14:14:08 -05:00
Scott Lahteine	b2bd77c40a	Merge pull request #8191 from thinkyhead/bf2_rearm_more [2.0.x] Add SDCARD_SORT_ALPHA options for LPC1768	2017-10-31 14:12:14 -05:00
Scott Lahteine	571ced712d	Add SDCARD_SORT_ALPHA options for LPC1768	2017-10-31 14:05:40 -05:00
rafaljot	778e4e4c23	Update InterruptVectors_Due.cpp const pfnISR_Handler *isrtab = get_relocated_table_addr(); What compiler do you use? Arduino 1.8.5 can't compile this "const".	2017-10-31 15:00:06 +01:00
Scott Lahteine	cae8703e0d	Merge pull request #8181 from thinkyhead/bf2_fix_bootscreen_repeat [2.0.x] Only show custom bootscreen once	2017-10-31 02:37:40 -05:00
Scott Lahteine	a516856df9	Only show custom bootscreen once	2017-10-31 01:47:30 -05:00
GMagician	727a403ba1	[2.0.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour (#8176 ) * [2.0.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour NO_MOTION_BEFORE_HOMING should prevent XYZ movements only when homing is not done. E axes should be allowed * Update G0_G1.cpp * Update G0_G1.cpp	2017-10-30 22:50:22 -05:00
Alexey Shvetsov	577659cacf	Basic support for Azteeg_X5_GT (#8139 ) * Basic support for Azteeg_X5_GT Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org> * Add fan pins for AZTEEG X5 GT Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org> * Fix endstop pins * Add servo0 pin	2017-10-30 16:01:20 -05:00
Scott Lahteine	0b02f9cc33	Merge pull request #8168 from thinkyhead/bf2_config_tweak [2.0.x] Apply Re-ARM SPI review items	2017-10-30 15:49:50 -05:00
Scott Lahteine	04c0d9f3c3	Implement kinematic software endstops	2017-10-30 15:16:30 -05:00
Scott Lahteine	9f89b5d876	Fix for MAX_VFAT_ENTRIES sanity check	2017-10-30 15:11:47 -05:00
Scott Lahteine	2cdde08339	Apply items specified in code review Followup to #8122	2017-10-30 15:03:07 -05:00
Scott Lahteine	34be5d33c0	The plural of 'axis' is 'axes'	2017-10-30 14:21:43 -05:00
Bob-the-Kuhn	6e5f13a5c2	Merge pull request #8122 from Bob-the-Kuhn/2.0.x-restore-Re-ARM-RepRap-Discount-Full-Graphics-fix-(partial-solution) 2.0.x - Restore fix for garbaged display on Re-ARM with RepRap Full Graphics Smart Controller	2017-10-30 13:16:16 -05:00
Bob-the-Kuhn	b7a66742dd	tested add sort alpha section to other LPC1768 boards	2017-10-30 13:01:19 -05:00
Jeffrey Li	bbc2e66634	Fix AZSMZ MINI pins for new LPC1768 pinmapping	2017-10-30 04:19:06 -07:00
Scott Lahteine	31e96935f7	Fix EXTRA_FAN_SPEED Addressing #8158	2017-10-30 00:10:00 -05:00
Scott Lahteine	c94dce6b32	Merge pull request #8113 from thinkyhead/bf2_fixup_sd_reprint [2.0.x] Cleanup after SD Print Again, whitespace, tabs	2017-10-29 23:57:51 -05:00
Scott Lahteine	ce1c9c0808	Tweak QUICK_HOME description	2017-10-29 23:48:13 -05:00
Scott Lahteine	12458cefc4	Remove 5s timer hack. Encoder pos is saved on print start!	2017-10-29 22:45:19 -05:00
Scott Lahteine	9a4cf11835	Remove return_to_status_ms hack, just use defer...	2017-10-29 22:45:18 -05:00
Scott Lahteine	8949c8c0a5	Move SD_REPRINT_LAST_SELECTED_FILE to ultralcd.cpp	2017-10-29 22:45:18 -05:00
Scott Lahteine	817175613a	Merge pull request #8157 from thinkyhead/bf2_anet_10_servo [2.0.x] Define a default SERVO0_PIN for Anet 1.0	2017-10-29 19:55:00 -05:00
Scott Lahteine	723f2a77f6	Implement support for Dual X and Y endstops	2017-10-29 18:56:04 -05:00
Scott Lahteine	e04425281d	Add Dual Steppers / Endstops to configs	2017-10-29 18:56:04 -05:00
Scott Lahteine	edff2c917b	Cleanup for DIGIPOTS settings	2017-10-29 18:56:03 -05:00
Scott Lahteine	3e8754a38a	Add/correct time units on planner vars / M205 B	2017-10-29 18:47:21 -05:00
Scott Lahteine	b2a48f1a04	Provide a SERVO0_PIN for non-standard LCD	2017-10-29 18:36:16 -05:00
Scott Lahteine	b232f39341	AVR: Hidden option to use 8s watchdog	2017-10-29 18:36:16 -05:00
Scott Lahteine	9d4cfd2013	Merge pull request #8142 from thinkyhead/bf2_fix_m303 [2.0.x] Fix M303 thermal protection	2017-10-29 04:46:34 -05:00
Scott Lahteine	eae0aea1e0	Fix M303 thermal protection	2017-10-29 04:30:50 -05:00
Luc Van Daele	a1a4fc277e	(2.0.x) serious bug G33 (#8136 ) * (2.0.x) serious bug G33 * Revert config changes This reverts commit 74b5a98223b7b7fb970d05b8541f4a079c3cfe56.	2017-10-29 04:12:33 -05:00
Thomas Moore	325233b454	Fix automatic stepper assignment for X/Y/Z dual stepper drivers (#8130 )	2017-10-28 19:45:07 -05:00
Thomas Moore	50b4f9cbf7	LPC1768 Pin Mapping and M43 cleanup (#8119 ) * LPC1768 M43 cleanup * Update pinmapping.h to #define pins	2017-10-28 19:44:54 -05:00
Scott Lahteine	6b1d1a818b	Revert default BABYSTEP_MULTIPLICATOR to 1	2017-10-27 19:45:44 -05:00
etagle	ba8dc678f5	Arduino Due XON/XOFF implementation Alos includes emergency parser and configurable TX/RX buffers for Arduino Due.	2017-10-27 03:24:23 -05:00
etagle	8d9c3cc2b7	Add a module for Due SRAM-based Interrupt Vector Table This is the ONLY way to be able to override ISRs stolen by the Arduino Runtime, such as Serial or USB device interrupts. This feature is needed so Arduino modules can be replaced and enhanced.	2017-10-27 03:24:23 -05:00
etagle	c9bbef6380	Cosmetic fix for HAL_AVR/MarlinSerial.cpp Instead of using const char, it is better to use uint8_t	2017-10-27 03:24:23 -05:00
LVD-AC	dcfc2503c2	G33 Autotune calibration update #10	2017-10-27 02:11:24 -05:00
Scott Lahteine	b338cafc65	Merge pull request #8111 from thinkyhead/bf2_fwretract_fix_oct26 [2.0.x] Improved Firmware Retraction logic	2017-10-27 02:02:06 -05:00
Scott Lahteine	ada90f7335	Clean up trailing spaces	2017-10-26 23:33:43 -05:00
Scott Lahteine	7fad26549b	Concise SD_REPRINT_LAST_SELECTED_FILE description	2017-10-26 23:33:02 -05:00
Scott Lahteine	33f379fe88	Add some Polish language Thanks @SCiunczyk	2017-10-26 22:49:04 -05:00
Scott Lahteine	daeff5a11a	Tweak neopixel self-test	2017-10-26 22:47:07 -05:00
Scott Lahteine	0ceec1f166	Fix leveling_active_at_z warning	2017-10-26 22:22:54 -05:00
studiodyne	eb02f8c719	Improve FWRETRACT logic, add common sense	2017-10-26 22:22:54 -05:00
Scott Lahteine	bd78ca0ee3	Add M290 Babystepping	2017-10-26 20:44:43 -05:00
Scott Lahteine	ce5f0ec85a	Bring STM32 example config up to date	2017-10-26 17:25:44 -05:00
Scott Lahteine	46e9eae159	Tweak to M100 config comment	2017-10-26 17:25:44 -05:00
Scott Lahteine	c45514f811	Merge pull request #8094 from thinkyhead/bf2_neopixel_led_parity [2.0.x] Bring NEOPIXEL_LED into parity with 1.1.x	2017-10-26 17:24:38 -05:00
Bob-the-Kuhn	229a27a1c7	save FLASH by using reduced font for some languages	2017-10-26 16:08:17 -05:00
Roxy-3D	3f5f39576b	Reprint option for last SD Memory card file (#8106 ) * Re-Print of same SD Memory Card file with single click * Re-Print of same SD Memory Card file with single click * This is the bugfix-v2.0.0 version of https://github.com/MarlinFirmware/Marlin/pull/8104	2017-10-26 15:50:18 -05:00
Thomas Moore	9e699811d2	Make LPC1768 pinmapping not specific to Re-ARM (#8063 ) * Merging early because of build failures. See #8105 * Make LPC1768 pinmapping not specific to Re-ARM * Add HAL_PIN_TYPE and LPC1768 pin features * M43 Updates * Move pin map into pinsDebug_LPC1768.h * Incorporate comments and M226 * Fix persistent store compilation issues * Update pin features * Update MKS SBASE pins * Use native LPC1768 pin numbers in M42, M43, and M226	2017-10-26 13:37:26 -05:00
Scott Lahteine	3ac581eac9	Neopixel changes for parity with 1.1.x	2017-10-25 18:40:04 -05:00
jeffyl	7b3098bbd5	Add AZSMZ Mini (#8005 ) * Add AZSMZ Mini * Remove tabs, adjust spacing * Renumber boards to group by family * Patch up spacing * Tweak	2017-10-25 01:16:54 -05:00
Scott Lahteine	e00ed10c4c	GT2560 config MKS_MINI_12864 => SDSUPPORT	2017-10-25 01:12:48 -05:00
Scott Lahteine	10a5e4d80f	Merge pull request #8078 from thinkyhead/bf2_mks_mini_lcd [2.0.x] Add MKS MINI 12864 support to GT2560	2017-10-25 01:10:03 -05:00
Scott Lahteine	ee9b8bf0f1	Add MKS MINI 12864 support to GT2560	2017-10-24 19:15:41 -05:00
Scott Lahteine	f65fc7ffab	Merge pull request #8044 from thinkyhead/bf2_mesh_consolidate [2.0.x] Simplify mesh bounds config	2017-10-24 18:56:43 -05:00
Scott Lahteine	070cd34fe8	Merge pull request #8077 from thinkyhead/bf2_MKS_BASE_followup Clean up HAL trailing spaces, MKS SBASE pins	2017-10-24 18:38:48 -05:00
Scott Lahteine	7f55d82fd1	Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h	2017-10-24 18:26:43 -05:00
Scott Lahteine	90a14b4f5b	Clean up HAL trailing spaces, MKS SBASE pins	2017-10-24 18:20:23 -05:00
Thomas Moore	51fafccc16	[2.0.x] Enable hardware serial ports on LPC1768 (#8004 ) * Enable hardware serial ports on LPC1768 * Fix compilation errors with other HALs * FIx order of includes in LPC1768 HAL main.cpp * Add support for RX_BUFFER_SIZE and TX_BUFFER_SIZE options in Configuration_adv.h	2017-10-24 17:28:33 -05:00
Scott Lahteine	580b6e9089	Apply physical limits to mesh bounds	2017-10-24 16:54:07 -05:00
Scott Lahteine	4e2baeb3e1	Update indentation, file-wrapping for Marlin 2.0.x	2017-10-24 16:54:06 -05:00
Scott Lahteine	60af705e6d	Relocate SPI.h to the HAL folder	2017-10-24 16:54:06 -05:00
Scott Lahteine	46aae4c6e7	Merge pull request #8074 from thinkyhead/bf2_verbiage_like_8061 Fix some config verbiage	2017-10-24 15:25:12 -05:00
Scott Lahteine	3356d5a72d	Merge pull request #8072 from thinkyhead/bf2_fix_M600 [2.0.x] Fix position sync in M600 pause/resume	2017-10-24 14:55:46 -05:00
Scott Lahteine	5f87324536	Fix some config verbiage	2017-10-24 14:53:42 -05:00
Scott Lahteine	272f9f65dc	Fix some typos	2017-10-24 14:29:15 -05:00
studiodyne	8181220bfd	Fix position sync in M600 pause/resume	2017-10-24 14:29:15 -05:00
cdedwards	6296ab2173	Add GFX overlay to UBL mesh edit (#8038 ) * Add GFX overlay to UBL mesh edit Fixed misplaced HAS_TEMP_BED in dogm_bitmaps.h rename _lcd_babystep_zoffset_overlay to _lcd_zoffset_overlay_gfx and move it out of BABYSTEP_ZPROBE_OFFSET to we can use it for over things. Add this function into UBL mesh edit screen. update all Configuration.h to add ENABLE_MESH_EDIT_GFX_OVERLAY * Add Sanity to UBL insanity Need to check for DOGLCD otherwise error out.	2017-10-24 14:14:03 -05:00
Roxy-3D	72156a2029	change to better (more clear) names (#8050 ) set_destination_to_current() changed to set_destination_from_current() set_current_to_destination() changed to set_current_from_destination()	2017-10-21 11:42:26 -05:00
Scott Lahteine	0cb423b5b3	Apply consistency for other configs	2017-10-21 00:41:51 -05:00
Scott Lahteine	8c78f8f790	Add Makeboard MINI for Micromake C1	2017-10-21 00:41:51 -05:00
Scott Lahteine	1fbb307aaf	Merge pull request #8021 from thinkyhead/bf2_scroll_longnames [2.0.x] Add SCROLL_LONG_FILENAMES to reveal longer filenames	2017-10-20 21:33:54 -05:00
Scott Lahteine	3d2b2eb1ca	Prevent SDCARD_SORT_ALPHA from exploding	2017-10-20 19:13:21 -05:00
Scott Lahteine	783ddf9691	Add SCROLL_LONG_FILENAMES option	2017-10-20 19:13:21 -05:00
Roxy-3D	5439358281	Basic UBL operations working on 32-bit platforms (#8024 ) * 32-bit work for UBL * Update FT i3-2020 reference file	2017-10-19 10:44:45 -05:00
Scott Lahteine	9e5cbf0198	BQ should set this in its config, and does	2017-10-18 22:56:03 -05:00
Scott Lahteine	348e5e3109	Simplify Cartesian probing boundaries Followup to #8012	2017-10-18 17:14:32 -05:00
Luc Van Daele	3986a84f77	boolval revisited (#8016 )	2017-10-18 14:03:17 -05:00
Roxy-3D	572cf0ec95	UBL able to generate mesh and save and load it on 32-bit platforms (#8015 ) * Get UBL Mesh Generation, Mesh Save & Mesh Load working with 32-Bit platforms * clean up read_data() and write_data() for non-LPC1768 HAL's * Get read_data() and write_data() return codes consistent All HAL's read_data() and write_data() return false if they succeed. * Get read_data() and write_data() return codes to be consistent Make read_data() and write_data() return true if an error happens. * Say UBL is now checked out on machine types in default Configuration.h file.	2017-10-18 14:00:29 -05:00
Thomas Moore	67cc29cd3c	Update UBL mesh boundaries to accomidate beds centered at 0, 0 (#8012 )	2017-10-18 10:03:30 -05:00
Roxy-3D	6cb26c98c8	Fix Baby Stepping on 32-Bit platforms (#8001 ) Also, Max7219 debug code was used for this effort. It has been improved and hardened.	2017-10-16 16:29:37 -05:00
Scott Lahteine	3b7b0492f8	Merge pull request #7993 from jeffyl/bugfix-2.0.x [2.0.x] Proper support for AZSMZ 12864 LCD on SmartRAMPS	2017-10-16 14:12:29 -05:00
Jeffrey Li	26531f2715	Add lcd to all sample configs	2017-10-16 03:24:25 -07:00
Scott Lahteine	ce48403a0b	Add EXTRA_FAN_SPEED feature Based on #7883 by @studiodyne	2017-10-16 02:34:13 -05:00
Jeffrey Li	eeb4611606	Add proper support for the AZSMZ 12864 LCD on a SMART RAMPS	2017-10-16 00:33:07 -07:00
Scott Lahteine	c46189e429	Fix UBL+Delta segmented feedrate Based on #7948	2017-10-15 16:31:09 -05:00
Scott Lahteine	5c4f3e0107	Add LCD_SET_PROGRESS_MANUALLY	2017-10-15 03:05:29 -05:00
Scott Lahteine	014a83fe09	Merge pull request #7984 from thinkyhead/bf2_micromake_c1 [2.0.x] Micromake C1 Configurations, Unaccented French	2017-10-14 21:19:32 -05:00
Scott Lahteine	bc7df0188e	Add Micromake C1 configurations	2017-10-14 20:28:12 -05:00
Scott Lahteine	34a261416f	Add unaccented French language	2017-10-14 20:28:12 -05:00
Scott Lahteine	e587f0893c	Define AVR_ATmega2560_FAMILY_PLUS_70 in Conditionals	2017-10-14 19:05:32 -05:00
Scott Lahteine	fd128b3c93	Fix some AVR HAL code style	2017-10-14 19:05:10 -05:00
Scott Lahteine	799360c576	Enhance Teensy/RAMPS pins files	2017-10-14 18:44:20 -05:00
Scott Lahteine	d3e5a22a5d	Add MIN_SOFTWARE_ENDSTOP_[XYZ] to example configs	2017-10-14 18:44:20 -05:00
Jeff Eberl	b206f70693	Split the software endstop capability by axis.	2017-10-14 18:44:20 -05:00
Scott Lahteine	ec69e97bda	Merge pull request #7974 from jeffyl/bugfix-2.0.x Fix include path for VIKI	2017-10-14 17:38:42 -05:00
Morten	91e28edda6	[2.0.x] Add new board: MKS Sbase (#7945 ) * Add files via upload * Add files via upload * Add files via upload * Checked LCD / edited / revised pins_MKS_BASE.h As requested :) * Delete Configuration_adv.h * Delete Configuration.h * Deleted /Marlin/Marlin/src/config/examples/MksSbase/. and moved them to /Marlin/Marlin/src/config/examples/Mks/Sbase/. * Add files via upload	2017-10-14 09:44:18 -05:00
Jeffrey Li	3c8a3a02ba	Fix include path for VIKI	2017-10-14 04:06:17 -07:00
Scott Lahteine	4586acad8c	Merge pull request #7959 from alexxy/bugfix-2.0.x Python isnt always python2	2017-10-14 05:02:07 -05:00
Scott Lahteine	497f86453e	Merge pull request #7964 from gallynero/patch-2 fix 'axis_unhomed_error' not defined error	2017-10-14 05:00:58 -05:00
Scott Lahteine	c0dddd4233	Tweaks to tool_change, GcodeSuite::T()	2017-10-14 02:53:19 -05:00
Scott Lahteine	ca66574062	ADC sensor fix inspired by 'Evgen2' on Twitter	2017-10-14 02:28:13 -05:00
Scott Lahteine	1344ca4b2f	UBL no longer needs ubl_state	2017-10-14 02:18:32 -05:00
Scott Lahteine	8dd08425fd	Improve LCD leveling edits	2017-10-14 02:18:31 -05:00
Scott Lahteine	3e3911fb81	Use planner.leveling_active for all leveling systems	2017-10-14 02:18:31 -05:00
Scott Lahteine	32c607ffe2	Ensure fade factor is recalculated if fade height changes	2017-10-14 02:18:31 -05:00
Scott Lahteine	ca1e47375c	Move fade_scaling_factor_for_z to Planner	2017-10-14 02:18:31 -05:00
Scott Lahteine	9a930ebec2	Make leveling_is_active a macro	2017-10-14 02:18:31 -05:00
Scott Lahteine	58abc66c1d	Tweak bed leveling conditionals	2017-10-14 02:18:31 -05:00
Scott Lahteine	1adb5a6a48	Remove obsolete UBL z_offset	2017-10-13 08:22:46 -05:00
gallynero	3619a4cbea	fix 'axis_unhomed_error' not defined error Fix 'axis_unhomed_error' not defined error when pause with unhomed status	2017-10-13 09:08:02 +02:00
Alexey Shvetsov	12d212d1b4	Python isnt always python2 So now this script is compatible with both python versions 2 and 3 Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>	2017-10-13 01:39:06 +03:00
Scott Lahteine	cc01a36363	Merge pull request #7947 from thinkyhead/bf2_more_READMEs [2.0.x] Add a README.h file for Arduino IDE users	2017-10-12 06:56:41 -05:00
Scott Lahteine	4764710b11	Add a README.h file for Arduino IDE users	2017-10-11 18:10:15 -05:00
Bob-the-Kuhn	4e3ee845b9	config_adv (#7941 ) get rid of twi.h move to board files	2017-10-11 15:42:24 -05:00
Roxy-3D	0e260c6c1d	Get FolgerTech i3-2020 working again with 32-bit platforms (#7944 ) Setup FolgerTech i3-2020 Configuration files as a reference platform for 32-Bit work. Also fix MAX7219 debug lights on 32-bit platforms.	2017-10-11 15:23:04 -05:00
Bob-the-Kuhn	26bfae58d4	MPC4451 I2C support	2017-10-11 00:30:41 -05:00
Scott Lahteine	1f5c432e29	Merge pull request #7920 from thinkyhead/bf2_neopixel_full [2.0.x] Move FILAMENT_RUNOUT_SENSOR to a feature	2017-10-10 03:05:00 -05:00
Scott Lahteine	732e87e83c	Merge pull request #7892 from GMagician/Serial-double-echo-fix [2.0.x] Serial double echo fix	2017-10-10 02:42:16 -05:00
Scott Lahteine	f8e8fcb978	Move FILAMENT_RUNOUT_SENSOR to a feature	2017-10-10 02:37:42 -05:00
Slawomir Ciunczyk	a11e6a1022	Different NEOPIXEL types Same as #7728 but for 2.0.x, Lot of cleanup and remove references in whole code to other "LED files" than leds.h. Now will be much easier to add next drivers/libraries. e.g. FastLED. But bad news, currently FastLED is suporting only RGB devices (no RGBW)	2017-10-10 02:17:36 -05:00
Scott Lahteine	b30b55307c	Merge pull request #7909 from thinkyhead/bf2_goodbye_legacy_advance [2.0.x] Remove legacy ADVANCE feature	2017-10-10 00:31:18 -05:00
Scott Lahteine	1d04197f2f	Merge pull request #7916 from thinkyhead/bf2_probeless_ubl [2.0.x] Allow UBL G29 and G26 to build without a probe	2017-10-10 00:30:27 -05:00
Thomas Moore	9b0ee53b12	Use segmented moves when moving axis from LCD	2017-10-09 23:25:43 -05:00
Scott Lahteine	442669d23c	Allow UBL to build without a probe	2017-10-09 18:57:41 -05:00
Scott Lahteine	20ebe218c8	Tweaks to VIKI lcd support	2017-10-09 17:01:07 -05:00
Scott Lahteine	09fa34a9e1	Modernize configs	2017-10-09 16:18:10 -05:00
Scott Lahteine	560d366b80	Move VIKI SCK/MOSI pins fix to Conditionals_POST.h	2017-10-09 16:13:49 -05:00
Scott Lahteine	e9bcb9d048	Add 4 new LCD displays	2017-10-09 15:58:02 -05:00
Scott Lahteine	03f4891fb9	Remove legacy ADVANCE feature	2017-10-09 04:25:18 -05:00
GMagician	546f02c6f4	[2.0.x] Addressing #7896 Compiler error, added char c variable	2017-10-08 23:16:35 +02:00
GMagician	eb96d37da0	Serial double echo fix Fix double character sent when TX buffer size is 0 on mega2560	2017-10-07 22:20:00 +02:00
Scott Lahteine	deeea98d22	LCD filename already concatenated	2017-10-07 15:16:05 -05:00
Scott Lahteine	a058638d11	Merge pull request #7875 from thinkyhead/bf2_fill_eeprom_dat_ff [2.0.x] Update LPC persistent store to initialize eeprom.dat with FF	2017-10-07 15:13:21 -05:00
Scott Lahteine	ae1a18d0a1	LCD filename already concatentated	2017-10-07 15:10:15 -05:00
Scott Lahteine	12aa1b999a	Fix display issue with SD_SORT_ALPHA cached names	2017-10-07 15:08:08 -05:00
Dave Johnson	9d0e4ea3d5	[2.0.x] Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled (#7879 ) * Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled If HOME_AFTER_DEACTIVATE, there is no need to warn on LCD since printer will home prior to starting print. Saves 60 bytes PROGMEM on AVR with U8g panel. * Reduce lines used * Reduce lines used	2017-10-07 15:02:55 -05:00
Scott Lahteine	8315a8a716	Apply fixes for DUE Alternative to #7882. If F_CPU is greater than 1000 it can be evenly divided by 8. Over 10000, 16; over 100000, 32; over 1 million, 64; etc.	2017-10-07 14:31:18 -05:00
Scott Lahteine	4b36a542e0	Merge pull request #7876 from thinkyhead/bf2_hotend_messages [2.0.x] Addressing #7612	2017-10-07 13:37:43 -05:00
Unknown	12730c1303	[2.0.0] Resolve USE_CONTROLLER_FAN compile errors Add to controllerfan.cpp: #include "../module/stepper_indirection.h" #include "../module/temperature.h"	2017-10-07 05:26:36 -07:00
Scott Lahteine	7fb3343bda	[2.0.x] Addressing #7612 Change "extruder" to HOTEND in sanity error messages	2017-10-07 02:27:26 -05:00
victorpv	8998f31ee1	Update LPC persistent store to initialize eeprom.dat with FF This change initialize any data in eeprom.dat beyond the current file size to FF. That way if eeprom.dat is deleted and created again, it doesn't take the old values or random ones, but rather starts with FF in all positions as a real brand new or erased eeprom.dat Currently if you delete eeprom.dat and restart the board, the new file is created in the same sector with the same content, since FAT does not actually delete the data, just marks the sector as free. I tested by deleting the file, and then rebooting the board, and checking the file content. The change can be tested in the same way, deleting, rebooting the board, and then the new content should be all FF. If an eeprom file already exist with data on it, but smaller than E2END, it will be padded with FF on first access, so it will not have random or old content appended.	2017-10-07 02:18:42 -05:00
Scott Lahteine	2aa22c5a5e	Merge pull request #7874 from thinkyhead/bf2_anet_encoder_pulses [2.0.x] Fixing ANET encoder pulses	2017-10-07 01:21:23 -05:00
Scott Lahteine	f99d1dedae	Fixing #7833 Derived from #7873	2017-10-07 00:10:05 -05:00
Scott Lahteine	de84f57a9c	Patch SD file draw bug	2017-10-06 23:57:11 -05:00
Scott Lahteine	ef90b49fff	Remove extra NEWPANEL settings in Conditionals_LCD.h	2017-10-06 23:56:58 -05:00
Scott Lahteine	67a7dd9792	Merge pull request #7866 from thinkyhead/bf2_finally_G33_is_done [2.0.x] Apply G33 updates	2017-10-06 16:03:26 -05:00
Scott Lahteine	b220bc7521	Apply G33 updates Adapted from #7865	2017-10-06 15:47:51 -05:00
Scott Lahteine	9fe7f53216	Misc general spacing cleanup	2017-10-06 15:14:01 -05:00
Scott Lahteine	c0382cd8cd	Add UTF-8 mapper for Slovak language Based on #7862, #7846 by @rmoravcik	2017-10-06 15:14:01 -05:00
Scott Lahteine	c81843a414	Set TEMP_SENSOR_0 to 1 in CR-10 example config As pointed out in #7692 by @totalitarian	2017-10-06 14:30:53 -05:00
android444	72693a7e87	[2.0.x] Fixed RAMPS FD V1 pins.h file (#7852 ) * test only test * Fixed RAMPS FD V1 pins.h file * Fix typo	2017-10-06 13:27:15 -05:00
Chris Pepper	aa51a02b8f	LPC1768: fix serial buffer underrun (#7854 ) When the buffer is empty index_write == index_read, but they needed constrained by buffer_mask	2017-10-05 17:19:43 -05:00
Chris Pepper	46b2773e13	General fixes for LPC1768 (#7834 ) * fixed some include paths * LPC1768: Fix Serial API Add missing serial methods used if TX_BUFFER_SIZE is set Change return value of HalSerial:read to match Arduino API * LPC1768: add filters to ADC This is to try and compensate for hardware issue and oversensitivity to noise * LPC1768: remove the polling section of delayMicroseconds * LPC1768: lock usb mass storage device while device accesses it. Currently only applicable to persistent store, The device always has priority and will unmount the sd card from the host, Windows then tries to automount again so it can look like the explorer window freezes. Linux Mint, by default, just closes the Nemo window. * Add timeout to make sure if Serial never connects that Marlin still boots * Remove unneeded ifdef CPU_32_BIT In general the need for ifdef CPU_32_BIT blocks means that something is missing from the HAL API or a Platform, in this case HAL_TICKS_PER_US was missing from the AVR Platform * LPC1768: relocate RE-ARM debug_extra_script.py	2017-10-04 15:40:54 -05:00
Scott Lahteine	7258218f89	Fix xon_xoff_state initialization	2017-10-04 12:11:56 -05:00
Scott Lahteine	bf596fb039	Merge pull request #7818 from thinkyhead/bf2_xon_xoff [2.0.x] Add XON/XOFF serial handshaking	2017-10-02 23:52:30 -05:00
Scott Lahteine	ca3c9baf1b	Fix DUAL_X_CARRIAGE manual moves, add T0/T1 menu item	2017-10-02 23:35:55 -05:00
Scott Lahteine	a8b8d4e85e	Add a typedef for MENU_ITEM(function,…) functions	2017-10-02 23:33:57 -05:00
Scott Lahteine	6ea2cc0293	Make prepare_move_to_destination_dualx a proper move function	2017-10-02 23:32:28 -05:00
Scott Lahteine	e472a7569b	Remove extra auto_current_control call	2017-10-02 23:32:05 -05:00
Scott Lahteine	508d764d63	Add serial XON/XOFF handshaking From @ejtagle, originally #7459	2017-10-02 04:12:30 -05:00
Scott Lahteine	af15383578	Add XON/XOFF options to example configs	2017-10-02 04:05:49 -05:00
Scott Lahteine	33c4d45f2f	Merge pull request #7812 from thinkyhead/bf2_fix_resume_print [2.0.x] Fix broken M600 resume_print	2017-10-01 22:55:28 -05:00
Scott Lahteine	a03e70d46c	Fix M600 resume_print Derived from #7811 and #7779	2017-10-01 21:59:42 -05:00
Scott Lahteine	2d41c59320	Tweak some spacing	2017-10-01 21:59:42 -05:00
Scott Lahteine	5ae390e240	Apply NO_MOTION_BEFORE_HOMING to examples	2017-10-01 21:58:50 -05:00
Scott Lahteine	90af1fe5ee	Implement NO_MOTION_BEFORE_HOMING option	2017-10-01 21:58:50 -05:00
Scott Lahteine	965b0ab53e	Spacing adjustments	2017-10-01 21:58:50 -05:00
Scott Lahteine	ac41eb5871	Merge pull request #7722 from tcm0116/2.0.x-warnings Cleanup 2.0.x compiler warnings	2017-10-01 21:56:54 -05:00
Thomas Moore	ae2173cd52	Synchronize retractions	2017-09-30 17:28:46 -05:00
Thomas Moore	0cb00f52d9	Cleanup warnings	2017-09-30 16:47:17 -05:00
Bob-the-Kuhn	1beaef0452	fix 3S hang & enable SPLIT	2017-09-30 10:27:41 -05:00
Thomas Moore	020ce176c4	Fix Servo class compile errors	2017-09-29 08:17:30 -05:00
Bob-the-Kuhn	62054af6eb	2.0 compile issues	2017-09-28 10:16:25 -05:00
Christopher Pepper	bea3ec2724	M355 S0, S1 fixes & faster LCD, SD card fix Travis error	2017-09-27 19:26:00 -05:00
Scott Lahteine	8c622a59cf	Merge pull request #7774 from thinkyhead/bf2_lcd_leveling_status [2.0.x] Show leveling status on character LCD	2017-09-27 13:10:25 -05:00
Scott Lahteine	56c05a7015	Show leveling status on character LCD	2017-09-27 12:21:15 -05:00
Scott Lahteine	2ee4eef25c	Merge pull request #7748 from GMagician/Addressing-#7730 [bugfix-2.0.x] Fix compiler error (issue #7730)	2017-09-27 12:06:55 -05:00
Scott Lahteine	ffed785656	Merge pull request #7768 from thinkyhead/bf2_HAL_STM32F1 [2.0.x] HAL for STM32F1	2017-09-27 11:52:34 -05:00
Scott Lahteine	604b804125	Add confirmation step to Init EEPROM	2017-09-27 11:31:38 -05:00
Tannoo	c869dc9745	User script return-to-status option	2017-09-27 11:31:38 -05:00
victorpv	e9acb63290	STM32F1 HAL Adding files for STM32F1 HAL based on libmaple/stm32duino core. Current persistent_store uses cardreader changes to be sent in separate commit, but could be changed to use i2c eeprom.	2017-09-27 11:20:10 -05:00
Scott Lahteine	c2b1d51f16	HAL whitespace and style cleanup	2017-09-27 10:55:36 -05:00
Scott Lahteine	c272f2c84e	Cleanup pins spacing	2017-09-27 10:55:36 -05:00
Scott Lahteine	dff2904c0f	Marlin code whitespace cleanup	2017-09-27 10:55:36 -05:00
Scott Lahteine	599f2ad983	Define pin accessors more like <Arduino.h>	2017-09-27 10:41:27 -05:00
Scott Lahteine	358656acc3	Tweak HAL_adc_start_conversion	2017-09-27 10:41:27 -05:00
Scott Lahteine	0cb4d25431	Tweaks to Servo classes	2017-09-27 10:41:27 -05:00
Phr3d13	10c1b442ca	Fixes for Anet10 and gt2560 Fixes for 2 "... not declared in this scope" compiler errors.	2017-09-27 07:34:02 -05:00
Phr3d13	5a3a53379f	Update pins for GT2560_Rev_A_Plus For PR #7738	2017-09-27 06:34:51 -05:00
Scott Lahteine	fdf1b8a7b8	Fix sanity check for LCD_FOR_MELZI Comes from #7760	2017-09-27 03:04:19 -05:00
Scott Lahteine	b93a55e15f	Fix ST7920_DELAY_2 potentially being unset Comes from #7760	2017-09-27 03:04:01 -05:00
Scott Lahteine	ce1638e32f	Add Babystep Z graphic overlay See PR #7593	2017-09-27 01:25:05 -05:00
Scott Lahteine	49c693c85b	Tweak to serial macros	2017-09-27 01:25:05 -05:00
Scott Lahteine	46709ed7e0	More featureful CR-10 configurations See #7725	2017-09-27 01:25:05 -05:00
Scott Lahteine	2b112143fa	Update Sanguinololu config version	2017-09-27 00:48:59 -05:00
Scott Lahteine	7cd5eb6d42	Update LEVEL_BED_CORNERS config option	2017-09-27 00:48:59 -05:00
Scott Lahteine	981a610f75	Disable BABYSTEP_XY, add to SDSORT comment	2017-09-27 00:48:59 -05:00
Scott Lahteine	4c5be9bb05	Fix a PARKING_EXTRUDER comment	2017-09-27 00:48:58 -05:00
Scott Lahteine	494b0eba2d	Config spacing fix	2017-09-27 00:48:47 -05:00
Scott Lahteine	2281154025	Increase BABYSTEP_MULTIPLICATOR to 100	2017-09-27 00:48:46 -05:00
Scott Lahteine	92dbf5f148	Fix babystep edit label, allowing translation	2017-09-26 23:43:05 -05:00
Scott Lahteine	37eb6d1732	Babystepping code tweak	2017-09-26 23:43:05 -05:00
Scott Lahteine	7a29f802d0	Fix ENCODER_PULSES_PER_STEP for G3D_PANEL	2017-09-26 23:43:05 -05:00
Scott Lahteine	5972251b17	No need for unused LCD_PINS_Dn	2017-09-26 23:27:53 -05:00
GMagician	c508e9adec	Fix compiler error Added missing include file, called 'leveling_is_active()' with no prototipe defined.	2017-09-25 23:18:26 +02:00
Scott Lahteine	c4e4a0688c	Fix bug in SD Autostart As pointed out by @marcio-ao in #7638	2017-09-24 17:53:39 -05:00
Scott Lahteine	6d5fcac54a	G33 changes from 1.1.x	2017-09-24 14:16:23 -05:00
Dave Johnson	f58ba3a64e	Improve AVR arch detection Replace ARDUINO_ARCH_AVR with __AVR__ to better detect architecture for non-Arduino dev environments. Resolves compile failure in PIO for 8-bit Teensduino targets More info: https://forum.pjrc.com/threads/33234-Using-Teensyduino-Selecting-Teensy-3-2-3-1-board-has-incorrect-platform-define http://www.atmel.com/webdoc/avrlibcreferencemanual/using_tools_1using_avr_gcc_mach_opt.html	2017-09-23 21:36:40 -07:00
Scott Lahteine	71d63fcafb	Apply LCD changes from 1.1.x Changes from #7720	2017-09-23 21:50:44 -05:00
Scott Lahteine	1587962547	Combine G-code files into fewer units Addressing #7707	2017-09-23 18:12:04 -05:00
Scott Lahteine	bfd1e75c04	Patch for caselight + lcd compile issues	2017-09-23 18:12:04 -05:00
Scott Lahteine	ff1f211eb4	Merge pull request #7695 from tcm0116/move_framework Move LPC1768 framework out of Marlin source folder	2017-09-23 17:12:48 -05:00
Thomas Moore	ddbd4b73e0	Move LPC1768 framework out of Marlin source folder	2017-09-23 16:59:31 -05:00
GMagician	00b1b33816	Fix compiler warning	2017-09-23 15:31:51 +02:00
Scott Lahteine	f37ed314e0	Friendly layout for Arduino IDE	2017-09-21 16:27:13 -05:00
Scott Lahteine	06a02dd200	Workaround for SCK/MOSI pins on VIKI	2017-09-21 16:27:12 -05:00
Scott Lahteine	f9ef446fb5	Clean up after refactor	2017-09-21 16:27:12 -05:00
Scott Lahteine	64dfb46461	Move z_endstop_adj to Endstops	2017-09-21 16:27:11 -05:00
Scott Lahteine	2e20c53c9d	Move endstop debug to Endstops	2017-09-21 16:27:11 -05:00
Scott Lahteine	a10451ceed	Move Volumetric methods to Planner	2017-09-21 16:27:11 -05:00
Scott Lahteine	6f92ab7eed	Move Controller Fan to feature	2017-09-21 16:27:11 -05:00
Scott Lahteine	07cf75883f	Move T (tool change) to cpp	2017-09-21 16:27:10 -05:00
Scott Lahteine	927524af6b	Move M999 to cpp	2017-09-21 16:27:10 -05:00
Scott Lahteine	1a37ebc76d	Move M163-M165 MIXING_EXTRUDER to cpp	2017-09-21 16:27:10 -05:00
Scott Lahteine	8ca0b2fd68	Move M355 caselight to cpp	2017-09-21 16:27:09 -05:00
Scott Lahteine	59608086e6	Move M350_M351 to cpp	2017-09-21 16:27:09 -05:00
Scott Lahteine	6e0503eab2	Move M907-M910 to cpp	2017-09-21 16:27:09 -05:00
Scott Lahteine	2e89685154	Move TMC2130 g-codes to cpp	2017-09-21 16:27:09 -05:00
Scott Lahteine	19dde5be03	Move M900 to cpp	2017-09-21 16:27:08 -05:00
Scott Lahteine	1b0acbff72	Move M605 to cpp	2017-09-21 16:27:08 -05:00
Scott Lahteine	75cf17d816	Move M702 MK2_MULTIPLEXER to cpp	2017-09-21 16:27:08 -05:00
Scott Lahteine	7ba2ab4fb3	Move M540 to cpp	2017-09-21 16:27:07 -05:00
Scott Lahteine	a90c7dbf64	Move M500-M503 to cpp	2017-09-21 16:27:07 -05:00
Scott Lahteine	aab5489962	Move M428 to cpp	2017-09-21 16:27:07 -05:00
Scott Lahteine	1fe25271e4	Move M401_M402 to cpp	2017-09-21 16:27:07 -05:00
Scott Lahteine	0589884d26	Move M400 to cpp	2017-09-21 16:27:06 -05:00
Scott Lahteine	4a220a8b79	Move M380_M381 to cpp, solenoid feature	2017-09-21 16:27:06 -05:00
Scott Lahteine	9be8cb0ac9	Move M360-M364 to cpp	2017-09-21 16:27:06 -05:00
Scott Lahteine	828405cac8	Move M302 to cpp	2017-09-21 16:27:06 -05:00
Scott Lahteine	8584f7e390	Move M250 to cpp	2017-09-21 16:27:05 -05:00
Scott Lahteine	ebb9bd5419	Move M240 to cpp	2017-09-21 16:27:05 -05:00
Scott Lahteine	d4aaa0f1c8	Move M304 to cpp	2017-09-21 16:27:05 -05:00
Scott Lahteine	609c4eea32	Move M301 to cpp	2017-09-21 16:27:04 -05:00
Scott Lahteine	4f14849675	Move M300 to cpp	2017-09-21 16:27:04 -05:00
Scott Lahteine	6ed5252884	Move M280 to cpp	2017-09-21 16:27:04 -05:00
Scott Lahteine	d4d3d92f8a	Move M260_M261 to cpp	2017-09-21 16:27:04 -05:00
Scott Lahteine	3e761696a0	Move M226 to cpp	2017-09-21 16:27:03 -05:00
Scott Lahteine	0e319104c2	Move M220 to cpp	2017-09-21 16:27:03 -05:00
Scott Lahteine	234de3547c	Move M211 to cpp	2017-09-21 16:27:03 -05:00
Scott Lahteine	6c7bad8bc3	Move M666 to cpp	2017-09-21 16:27:03 -05:00
Scott Lahteine	f5877aa93e	Move M665 to cpp	2017-09-21 16:27:02 -05:00
Scott Lahteine	33861d4e04	Move M206 to cpp	2017-09-21 16:27:02 -05:00
Scott Lahteine	7aca9fe2f7	Move M203-M205 to cpp	2017-09-21 16:27:02 -05:00
Scott Lahteine	b3822b9242	M202 is unused	2017-09-21 16:27:02 -05:00
Scott Lahteine	5e63efc1d9	Move M201 to cpp	2017-09-21 16:27:01 -05:00
Scott Lahteine	92c15f5578	Move M150 to cpp	2017-09-21 16:27:01 -05:00
Scott Lahteine	eef4a54778	Move M119-M121 to cpp	2017-09-21 16:27:01 -05:00
Scott Lahteine	379f16558e	Move M118 to cpp	2017-09-21 16:27:00 -05:00
Scott Lahteine	811c32b85a	Move M117 to cpp	2017-09-21 16:27:00 -05:00
Scott Lahteine	1d2061c935	Move M115 to cpp	2017-09-21 16:27:00 -05:00
Scott Lahteine	81b8fbf4d6	Move M114 to cpp	2017-09-21 16:27:00 -05:00
Scott Lahteine	5d2681a105	Move M100 to cpp	2017-09-21 16:26:59 -05:00
Scott Lahteine	beb346e49f	Move M92 to cpp	2017-09-21 16:26:59 -05:00
Scott Lahteine	381b17e6a9	Move M18_M84, M85 to cpp	2017-09-21 16:26:59 -05:00
Scott Lahteine	a911215b0e	Move M82_M83 to cpp	2017-09-21 16:26:59 -05:00
Scott Lahteine	4b9d1b9f26	Move M80-M81 to cpp	2017-09-21 16:26:58 -05:00
Scott Lahteine	0c7ba52451	Move M149 to cpp	2017-09-21 16:26:58 -05:00
Scott Lahteine	cbf40f7ee9	Move M145 to cpp	2017-09-21 16:26:58 -05:00
Scott Lahteine	b464887ea1	Make BARICUDA a feature	2017-09-21 16:26:57 -05:00
Scott Lahteine	14a5d2a273	Move M113 to cpp	2017-09-21 16:26:57 -05:00
Scott Lahteine	06f3c8029e	Move M111 to cpp	2017-09-21 16:26:57 -05:00
Scott Lahteine	a831977dee	Move M110 to cpp	2017-09-21 16:26:57 -05:00
Scott Lahteine	7479ff98b7	Move M140, M190 to cpp	2017-09-21 16:26:56 -05:00
Scott Lahteine	5b3e49babd	Move M108, M112, M410 to cpp	2017-09-21 16:26:56 -05:00
Scott Lahteine	df0432c7c8	Move M155 to cpp, auto-report to Temperature	2017-09-21 16:26:56 -05:00
Scott Lahteine	df031ab100	Move M106_M107 to cpp	2017-09-21 16:26:56 -05:00
Scott Lahteine	99c4b9050a	Move M105 to cpp	2017-09-21 16:26:55 -05:00
Scott Lahteine	a41130f854	Temp stat LEDs	2017-09-21 16:26:55 -05:00
Scott Lahteine	2c1eda9e00	Move M75-M78 to cpp	2017-09-21 16:26:55 -05:00
Scott Lahteine	fc52fc72ac	Move M48 to cpp	2017-09-21 16:26:54 -05:00
Scott Lahteine	be8d913484	Move M43 to cpp	2017-09-21 16:26:54 -05:00
Scott Lahteine	10fab24e50	Move M42 to cpp	2017-09-21 16:26:54 -05:00
Scott Lahteine	69b664b6fe	Move M31 to cpp	2017-09-21 16:26:54 -05:00
Scott Lahteine	a442c34a1a	Move SD commands to cpp	2017-09-21 16:26:53 -05:00
Scott Lahteine	be0e4a4ad0	Consolidate pause, apply to M125, M600, M24	2017-09-21 16:26:53 -05:00
Scott Lahteine	adca4a9b79	Move M17 to cpp	2017-09-21 16:26:53 -05:00
Scott Lahteine	33e00b6cd6	Move M3-M5 to cpp	2017-09-21 16:26:53 -05:00
Scott Lahteine	04583d46af	Move M0_M1 to cpp	2017-09-21 16:26:52 -05:00
Scott Lahteine	04376975ce	Move G92 to cpp	2017-09-21 16:26:52 -05:00
Scott Lahteine	931aa79d85	Move G42 to cpp	2017-09-21 16:26:52 -05:00
Scott Lahteine	84ddae56a8	Move G38 to cpp	2017-09-21 16:26:51 -05:00
Scott Lahteine	b8adae0785	Move G31_G32 to cpp	2017-09-21 16:26:51 -05:00
Scott Lahteine	9db5d21837	Move G30 to cpp	2017-09-21 16:26:51 -05:00
Scott Lahteine	13136376ee	Move G27 to cpp	2017-09-21 16:26:51 -05:00
Scott Lahteine	a1ee1628e5	Move G20_G21 to cpp	2017-09-21 16:26:50 -05:00
Scott Lahteine	9b4aa5ea8b	Move G17-G19 to cpp	2017-09-21 16:26:50 -05:00
Scott Lahteine	94d9def81c	Move G12 to cpp	2017-09-21 16:26:50 -05:00
Scott Lahteine	56f4a43535	Move G5 to cpp	2017-09-21 16:26:50 -05:00
Scott Lahteine	760f29a88e	Move G4 to cpp	2017-09-21 16:26:49 -05:00
Scott Lahteine	4007cbfe9e	Move G2_G3 to cpp	2017-09-21 16:26:49 -05:00
Scott Lahteine	27f7e3fe6f	Hide problem pins in pin debug list	2017-09-21 16:26:49 -05:00
Scott Lahteine	9c21191f74	Rename SPI class to avoid conflict (good?)	2017-09-21 16:26:49 -05:00
Scott Lahteine	51f195e698	Move dwell to gcode	2017-09-21 16:26:48 -05:00
Scott Lahteine	4f1eadf41f	FILAMENT_WIDTH_SENSOR feature	2017-09-21 16:26:48 -05:00
Scott Lahteine	d5fe0fb02b	Consolidate PrintCounter	2017-09-21 16:26:48 -05:00
Scott Lahteine	551752eac7	Consolidate "bedlevel" code	2017-09-21 16:26:47 -05:00
Scott Lahteine	71aefc2e22	Move heater output to Temperature class	2017-09-21 16:26:47 -05:00
Scott Lahteine	63228fc453	Move volumetric flag to GCodeParser	2017-09-21 16:26:47 -05:00
Scott Lahteine	bf7af95db3	Move flow_percentage to Planner	2017-09-21 16:26:46 -05:00
Scott Lahteine	8dc2838d98	Move host keepalive to GcodeSuite	2017-09-21 16:26:46 -05:00
Scott Lahteine	8fbb833de9	Encapsulate RGB(W) LEDs	2017-09-21 16:26:46 -05:00
Scott Lahteine	a98e9874db	FWRETRACT as a feature	2017-09-21 16:26:46 -05:00
Scott Lahteine	722786966a	Add gcode.cpp, motion., queue. - Apply to some G-codes.	2017-09-21 16:26:45 -05:00
Scott Lahteine	4231faf779	Initial split-up of G-code handlers by category	2017-09-21 16:26:45 -05:00
Scott Lahteine	e0a189a481	Consolidate Buzzer	2017-09-21 16:26:45 -05:00
Scott Lahteine	bca67a5b79	Main controller updates	2017-09-21 16:26:44 -05:00
Scott Lahteine	142d8aae56	Move debugging to serial.*	2017-09-21 16:26:44 -05:00
Scott Lahteine	a1e2b5da70	Fix LCD_PINS_Dn tests in pinsDebug_list.h	2017-09-21 16:26:44 -05:00
Scott Lahteine	038f82cc38	Fix L6470 init and options	2017-09-21 16:26:43 -05:00
Scott Lahteine	42e2dd9251	Build file updates	2017-09-21 16:26:43 -05:00
Scott Lahteine	614a86a380	SD file updates	2017-09-21 16:26:43 -05:00
Scott Lahteine	82fff87e16	Pins updates	2017-09-21 16:26:43 -05:00
Scott Lahteine	3d8a0ab4b2	Module updates	2017-09-21 16:26:42 -05:00
Scott Lahteine	0fcec02db5	LCD updates	2017-09-21 16:26:42 -05:00
Scott Lahteine	7dd0a46732	Language updates	2017-09-21 16:26:41 -05:00
Scott Lahteine	4a82e95c3e	Feature file updates	2017-09-21 16:26:41 -05:00
Scott Lahteine	d7ee81202f	Libs updates	2017-09-21 16:26:41 -05:00
Scott Lahteine	34101224c4	Inc updates	2017-09-21 16:26:41 -05:00
Scott Lahteine	f52a31a275	Core updates	2017-09-21 16:26:40 -05:00
Scott Lahteine	479652073b	Config updates	2017-09-21 15:52:17 -05:00
Scott Lahteine	54326fb06a	HAL updates	2017-09-21 15:52:17 -05:00
Scott Lahteine	7e42c7563c	Move build files into place	2017-09-12 14:51:06 -05:00
Scott Lahteine	b66d65f865	Move 'sd' files	2017-09-12 14:51:05 -05:00
Scott Lahteine	0b9a88d6ce	Move 'pins' files	2017-09-12 14:51:05 -05:00
Scott Lahteine	2b3b7d5d7f	Move 'thermistor' files	2017-09-12 14:51:05 -05:00
Scott Lahteine	0c9231fd04	Move 'module' files	2017-09-12 14:51:05 -05:00
Scott Lahteine	efa578d6b0	Move 'libs' files	2017-09-12 14:51:04 -05:00
Scott Lahteine	cc92e544a5	Move 'lcd' files	2017-09-12 14:51:04 -05:00
Scott Lahteine	5be07b5db2	Move 'inc' files	2017-09-07 07:42:55 -05:00
Scott Lahteine	9ea2ff950a	Move 'gcode' files	2017-09-07 07:42:55 -05:00
Scott Lahteine	4e4d16c92e	Move 'core' files	2017-09-07 07:42:55 -05:00
Scott Lahteine	fa5f9c2aec	Move 'feature' files	2017-09-07 07:42:54 -05:00
Scott Lahteine	f536c4dccb	Move configs	2017-09-06 06:28:30 -05:00
Scott Lahteine	48351fd6d5	Move root sources	2017-09-06 06:28:29 -05:00
Scott Lahteine	27cbb939b2	Clean up some HAL code	2017-08-31 18:36:53 -05:00
Christopher Pepper	b29b66feda	Temporary fix for odd stepper behaviour with servos	2017-08-31 18:33:07 -05:00
Christopher Pepper	8afe13b1a2	Fix compile issue when watchdog was disabled	2017-08-31 18:33:07 -05:00
Christopher Pepper	b908e38d08	Add needed platform defined gaurds to compile with Arduino IDE Also removed explicit platform HAL directory inclusion from platformio.ini to make sure these errors are caught by Travis in the future	2017-08-31 18:33:07 -05:00
Scott Lahteine	a037ddbf7b	Other spacing tweaks	2017-08-31 18:33:07 -05:00
Scott Lahteine	2af62a5d8d	Apply spacing, const to some HAL code	2017-08-31 18:33:07 -05:00
kfazz	fa9ff6be6e	try to fix LIN_ADVANCE for 32bit	2017-08-31 18:33:07 -05:00
kfazz	18f97c4013	add HardwareSerial and SoftwareSerial for Re-ARM. HardwareSerial has been tested on Uart0 (debug header) and Uart3 (i2c connector) Software Serial has been tested to work bi-directionally at 9600 and 115200 using pins 6 and 63 on J5, and unidirectionally (write only) at 250000. The code used to test was Teemuatlut's tmc2208 patch, and a few small changes to main used to echo recieved chars back to a host pc.	2017-08-31 18:33:07 -05:00
Bob-the-Kuhn	01fb45b4f8	hybrid PWM system Uses PWM1 to directly control pins 4, 6 & 11 (servo 0, 1 & 3) and PWM1 generated interrupts to control other pins. Interupt control of the servo pins had too much jitter so switched all that we could to PWM1 direct control. The PWM1 direct control pins have less than 1 microsecond pulse width jitter while the interrupt controlled ones can have 20+ microseconds of jitter. Also added insurance to the servo code in the "disable servo after move" section.	2017-08-31 18:33:07 -05:00
Tannoo	94dd39b3b7	LCD_UBL_memory_slot_corrections (#7516 ) * LCD_UBL_memory_slot_corrections Changed the memory slot edit function to work with the `settings.calc_num_meshes()` * Add a little more safety margin... * More corrections Error handling when the EEPROM is not available.	2017-08-31 18:33:07 -05:00
Roxy-3D	8587c4e1ec	Minor corrections to 32-bit branch (#7514 ) Mostly... clean up some compile time warnings for the 20x4 LCD Display.	2017-08-31 18:32:09 -05:00
Bob-the-Kuhn	7342d5c07a	ST7565	2017-08-31 18:31:43 -05:00
Bob-the-Kuhn	97444391e0	Servo & PWM support for LPC1768 (#7500 )	2017-08-31 18:31:43 -05:00
Tannoo	859fa35287	Re-Arm bugfixes (#7495 ) * UBL_correction * RGB Map function	2017-08-31 18:31:43 -05:00
Bob-the-Kuhn	d80877d570	Set pinMode with every digitalWrite (legacy compatibility)	2017-08-31 18:31:07 -05:00
Chris Pepper	9a950e3a5a	Update the delay functions and change the default pinmap for character displays (#7434 )	2017-08-31 18:31:07 -05:00
Scott Lahteine	105324b85b	Match the license headers in other files	2017-08-31 18:31:07 -05:00
Bob-the-Kuhn	69704b93f2	ultralcd.cpp fix compile error - switch to int16_t	2017-08-31 18:31:07 -05:00
Chris Pepper	61c0a10efe	Revert "SPI API platform implementation stubs" (#7416 ) This reverts commit 2dfa6ca72a2e8d43caf4932ca0d35792f0638917. Revert "Base HAL SPI Changes" This reverts commit 2afc521b8b6a81b2281a038f1b99a69f4a008e64. Revert "Initial HAL SPI API" This reverts commit 58f7ffe09ab5bc034b6510f5204f8d342138abaa.	2017-08-31 18:31:07 -05:00
Chris Pepper	a5cf3a190c	bugfix-2.0.x critical fix (#7401 ) * Fix mistake in gitignore file and add in missing core files. The missing leading slash on "lib" meant all folders names lib in the directory tree are ignored, rather than just the top level PlatformIO lib folder * Add LiquidCrystal Library and associated headers modified to compile.	2017-08-31 18:23:44 -05:00
Bob-the-Kuhn	76da81c1de	minimize SD card reads when using SDCARD_SORT_ALPHA (Re-ARM board) Because of the Re-ARM card's pinout there is only one SPI connected to the RepRap Discount Full Graphic LCD display. The LCD responds to ANY SCK transitions no matter if it's enable is inactive. The result is garbage (usually bars) on the LCD display whenever there is SD card activity. This code minimizes this by only accessing the SD card when changing directory levels if : SDCARD_SORT_ALPHA is enabled SDSORT_USES_RAM is true SDSORT_CACHE_NAMES is true The code changes result in file names being pulled from the ALPHA SORT memory array rather than the SD card. The code also gives the file count and file index functions their own variables. When they shared a common variable the index function sometimes resulted in the file count being short by 1. ======================================================================= cardreader.cpp & pins_RAMPS_RE_ARM.h changes Added another condition to cardreader.cpp to enable getting file names only from RAM. pins_RAMPS_RE_ARM.h : Added comments about the SD card accesses and the LCD display Combined all versions into this one.	2017-08-31 18:23:44 -05:00
Bob-the-Kuhn	84a11cfedc	HAL compatible pinsDebug & misc Re-ARM has been tested. AVR has not been tested. 1) moved all cpu specific items to files in the low level HAL directory for that CPU (pinDebug_Re-ARM.h & pinsDebug_AVR_8_bit.h 2) added pinsDebug.h to the top level directory 3) modified HAL_pinsDebug.h to select the correct support file for the selected CPU 4) Patched sanitycheck to stop throwing false errors. A long term solution will be done 5) misc changes & bug fixes arduino.cpp - included macros.h to fix a missing definition pinmap_re-arm.h - removed a duplicated line. pinmapping.h - changed from "ENABLED" to "defined" to fix a compile error ====================================================================== split SanityCheck up, improve pinsDebug system ====================================================================== switch to latest pins_RAMPS_RE_ARM.h	2017-08-31 18:23:44 -05:00
Christopher Pepper	32e759c928	SPI API platform implementation stubs	2017-08-31 18:23:44 -05:00
Christopher Pepper	4183a249b6	Moved CMSIS and other LPC1768 dependencies Fixes Arduino IDE builds for 8-bit AVR, misc: Adafruit NeoPixel currently incompatible with Teensy 3.5-6, blacklisted	2017-08-31 18:23:44 -05:00
Christopher Pepper	b55295ad33	Post merge fix Add macros.h to allow Enabled macro, also need to reference include files directly	2017-08-31 18:23:44 -05:00
Christopher Pepper	c66d1ac651	Debug Pins Support	2017-08-31 18:21:38 -05:00
Christopher Pepper	a31e32969f	Base HAL SPI Changes	2017-08-31 18:21:38 -05:00
Christopher Pepper	bcd050f33b	Initial HAL SPI API	2017-08-31 18:21:38 -05:00
Christopher Pepper	44b0c186a6	HAL for Re:ARM (LPC1768) architecture	2017-08-31 18:21:38 -05:00
teemuatlut	f3e562e46e	HAL for 32-bit Teensy (3.5, 3.6) architecture	2017-08-31 18:15:07 -05:00
Christopher Pepper	cfef925559	HAL for DUE architecture	2017-08-31 18:15:07 -05:00
Christopher Pepper	4b16fa3272	Implement HAL and apply macros across code-base Implement AVR Platform	2017-08-31 18:14:31 -05:00
Scott Lahteine	e4fcf460e7	Marlin bugfix-2.0.x Version/README	2017-08-31 17:56:08 -05:00
Scott Lahteine	367e1b54ba	Merge pull request #7591 from thinkyhead/bf1_misc_patches M111: no args reports current flags	2017-08-31 15:19:29 -05:00
Scott Lahteine	8a184a526a	Marlin: Patch G33, allow M111 to give status	2017-08-31 14:35:00 -05:00
Scott Lahteine	353c23b16e	Enforce BED_CENTER_AT_0_0 on Delta, SCARA	2017-08-31 14:34:59 -05:00
Scott Lahteine	898f48e331	CNC workspace planes for G5 According to LinuxCNC, G5 should throw an error if the current plane mode isn't XY.	2017-08-31 14:29:29 -05:00
Scott Lahteine	5851c2d36f	MAX7219 followup (#7564 ) * Add MAX7219_DEBUG to Travis CI testing * Tweak config and use standard pin naming for MAX7219_DEBUG * MAX7219: Apply coding standards, use macros, etc. * Make code work...	2017-08-31 11:44:43 -05:00
Scott Lahteine	52073f21c5	Merge pull request #7556 from thinkyhead/bf1_slovak_language Slovak UTF-8 translation	2017-08-27 21:05:53 -05:00
Scott Lahteine	321f98f867	Fix servo delay in Folgertech config	2017-08-27 20:53:27 -05:00
jneilliii	36771e9492	Fixes required for Creality CR-10	2017-08-27 20:39:16 -05:00
Roxy-3D	3f0b38ed5d	Add Max7219 LED Matrix Debug Support (#7563 ) * Add Max7219 LED Matrix Debug Support The Max7219 8x8 LED Matrix's are very helpful for debugging new code. And for that matter, just trying to maximize printer settings without causing stuttering. The displays are very inexpensive (under $2.00 with shipping) and provide a lot of help when trying to debug complicated code. * Try to keep Makefile up to date.	2017-08-25 17:03:07 -05:00
GMagician	0067bb2840	Addressing #7552 When M405 is used it changes 'volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]' value. When M406 disables M405 it leaves the value unchanged. This PR applies 'calculate_volumetric_multipliers' in M406 instead of resetting it to 1.0 because M200 may not be compatible with M405 hence I'm sure to restore anyway with correct value.	2017-08-25 03:23:16 -05:00
Scott Lahteine	2b12093589	Merge pull request #7532 from thinkyhead/bf1_fan_mux_vben New feature: Part-Cooling Fan Multiplexer	2017-08-25 03:16:40 -05:00
Michal Holes	54d48130f3	Slovak UTF-8 translation Slovak UTF-8 translation	2017-08-23 19:14:35 -05:00
Scott Lahteine	86c024ce98	Organize, document pins.h include lines	2017-08-23 18:33:00 -05:00
Scott Lahteine	c7b07d20f2	Minor patches to pins files	2017-08-23 18:32:59 -05:00
Scott Lahteine	356af7dcb0	Tweak Sanguinololu-related pins files	2017-08-23 18:32:59 -05:00
Scott Lahteine	11a724d8fc	Sanguinololu example configuration	2017-08-23 18:32:59 -05:00
Scott Lahteine	e337df2e98	Miscellaneous tweaks to serial outputs, code cleanups	2017-08-23 18:32:58 -05:00
Vben	c0409b85e7	New feature: Part-Cooling Fan Multiplexer	2017-08-18 15:59:04 -05:00
Scott Lahteine	e82e9073d6	Merge pull request #7530 from GMagician/Code-reduction Code reduction with some configurations	2017-08-18 13:57:59 -05:00
GMagician	6127154af3	Fix identation by tab There was a tab instead of spaces	2017-08-18 11:34:55 +02:00
GMagician	b94a1c6b9f	Code reduction this some configurations When switching noozle and extruder but these operations are done by the same servo in 'setup' function there is a unnecessary call	2017-08-18 11:11:00 +02:00
GMagician	405a2132f3	#7529 compile fix I made an error in previous fix	2017-08-17 22:04:28 +02:00
GMagician	869d7f3703	#7504 missing part #7504 integration has missed this part. When more than 1 servo is used with bltouch it's impossible to predefine default servo delay for it. In my original fix I completely removed this part but maybe this is a better compromise	2017-08-17 21:43:47 +02:00
Scott Lahteine	101ba70517	Merge pull request #7505 from thinkyhead/bf1_anet_1_pio Add Anet 1.0 to Platformio.ini	2017-08-17 00:33:20 -05:00
Vben	4817b39d98	Added new feature for AutoParking Extruder (APE)	2017-08-16 17:33:11 -05:00
Scott Lahteine	6772e33ef6	Use [XY]_CENTER for error correction Followup to #7512	2017-08-16 16:13:09 -05:00
Scott Lahteine	385f1bb9e5	Merge pull request #7504 from thinkyhead/bf1_servo_delays Individual servo delays	2017-08-16 16:05:22 -05:00
Scott Lahteine	2a31c9f2ce	Merge pull request #7515 from cdedwards/bugfix-1.1.x Fix for G26 spam output	2017-08-16 16:01:10 -05:00
MTrab	5fa61c0ad3	Add Anet 1.0 to Platformio.ini Added env:anet10 to platformio.ini for easy compile and upload to this board	2017-08-16 15:59:20 -05:00
Scott Lahteine	b3f59ec945	Merge pull request #7519 from thinkyhead/bf1_cleanups_aug_16 Add "Level Corners" menu item	2017-08-16 15:58:15 -05:00
Tannoo	b33739d493	UBL_Language_Update (#7520 ) * UBL_Language_Update Translatable strings * Use slightly better wording... * Use slightly better wording...	2017-08-16 09:49:04 -05:00
Scott Lahteine	a1878cd1c0	Add "Level Corners" menu option	2017-08-16 02:54:33 -05:00
Scott Lahteine	0a18fb735e	Use "PSU" label to fit on screen	2017-08-16 02:51:00 -05:00
Scott Lahteine	30887feae3	Tweak some formatting in ABL G29	2017-08-16 02:51:00 -05:00
Thomas Moore	257b693ab0	Advanced pause fixes (#7518 ) * Disallow filament change while paused * Use kinematic movemements in pause_print and resume_print	2017-08-15 22:57:13 -05:00
Tannoo	ab2ac1af71	UBL_LCD_storage_corrections (#7517 ) Correcting the storage selection. Also EEPROM error handling on the LCD.	2017-08-15 21:01:11 -05:00
cdedwards	f1843211e6	Fix for G26 spam output while heating, G26 will continuously spam the heater states instead of printing it out every 5000ms.	2017-08-15 17:04:53 -06:00
Roxy-3D	be5ca34215	Allow G29 to work correctly even if nozzle is off the mesh. (#7512 ) * work around previous regressions...	2017-08-15 17:04:52 -05:00
Scott Lahteine	06541ec885	Merge pull request #7448 from thinkyhead/bf1_delta_fixes Prevent damage if DELTA_HEIGHT is set badly	2017-08-15 16:35:09 -05:00
GMagician	e9c72978c7	Implement SERVO_DELAY as array This modify give SERVO_DELAY x servo basis	2017-08-15 00:28:47 -05:00
Scott Lahteine	96ae53cf41	Use MOVE_SERVO macro where possible	2017-08-15 00:28:39 -05:00
Scott Lahteine	3be9c19f12	Hold on move axis screens	2017-08-14 22:51:47 -05:00
Scott Lahteine	8fd58cd6dc	Patch goto labels for consistency	2017-08-14 22:51:47 -05:00
Scott Lahteine	75e6f72c89	Fix hexadecimal number formatting	2017-08-14 22:50:44 -05:00
Scott Lahteine	ac76101ec3	Eliminate goto in gcode_M48	2017-08-11 17:00:40 -05:00
Scott Lahteine	75e6ead5fd	Eliminate goto in gcode_G33	2017-08-11 17:00:40 -05:00
Scott Lahteine	6bd63d27b5	Updates to G29 for probe error handling	2017-08-11 17:00:40 -05:00
Thomas Moore	f54e0fc90f	Prevent damage if DELTA_HEIGHT is incorrect	2017-08-11 16:09:14 -05:00
Scott Lahteine	0938c62b48	Neater position_is_reachable call	2017-08-11 15:55:32 -05:00
Scott Lahteine	9d95b1b4df	Tweak Conditionals_post.h	2017-08-11 15:55:32 -05:00
Scott Lahteine	35d5a7bdff	Tweak CR-10 config/pins	2017-08-11 15:55:31 -05:00
Scott Lahteine	419c8969a7	Merge pull request #7479 from thinkyhead/bf1_fix_italian Fix Italian string length	2017-08-10 18:42:35 -05:00
Frederik Kemner	25a11cd485	Use bed size and inset instead of travel limits to define mesh area\n\nAs proposed in #7435 (#7480 )	2017-08-10 16:53:04 -05:00
Scott Lahteine	7f3406d47b	Fix Italian string length Addressing #7264	2017-08-10 15:41:35 -05:00
Jozsef Kiraly	97c21e9007	Support for Geeetech GT2560 Rev.A/Rev.A+	2017-08-06 00:42:54 -05:00
Scott Lahteine	b2822a59f9	Add a sanity check for valid bed size	2017-08-05 03:49:04 -05:00
Scott Lahteine	a7e5c1bf19	Use float to init TMC2133 steps-per-mm	2017-08-05 03:48:52 -05:00
Scott Lahteine	dd66d21749	Extend DEACTIVATE_SERVOS_AFTER_MOVE sanity-check As proposed in #7429	2017-08-05 03:48:52 -05:00
richarddeweerd	b370906031	Example config for Geeetech I3 Pro X with GT2560 controller	2017-08-05 03:48:52 -05:00
Scott Lahteine	804818b4d9	Bring configs up to date	2017-08-05 03:48:52 -05:00
Scott Lahteine	dd841a3675	Merge pull request #7410 from benlye/user-script-feedback Make audible user script feedback optional	2017-08-05 02:59:56 -05:00
Florian Heilmann	0fd2923a9f	Fix compilation with ADVANCED_PAUSE_FEATURE without SDSUPPORT (#7412 ) * Fix compilation of ADVANCED_PAUSE_FEATURE without SDSUPPORT * Fix Identation * Make use of IS_SD_PRINTING macro as per @MagoKimbra	2017-08-05 02:58:38 -05:00
benlye	24af9e1bf4	Make audible user script feedback optional Add a parameter to enable/disable audible user script feedback	2017-08-04 17:24:10 +01:00
Florian Heilmann	6827a162bb	Update language_de.h Add MSG_BLTOUCH MSG_DELTA_SETTINGS MSG_UBL_MESH_EDIT MSG_UBL_OUTPUT_MAP_BACKUP MSG_UBL_STEP_BY_STEP_MENU MSG_Z_FADE_HEIGHT	2017-08-04 09:35:21 +02:00
Scott Lahteine	3497153cf1	Followup cleanup patch Fix regression in #7428	2017-08-03 14:55:22 -05:00
Scott Lahteine	16f8c4865a	Merge pull request #7409 from FHeilmann/bf_update_ru_translation Update Russian Translation	2017-08-03 14:54:40 -05:00
Scott Lahteine	622048ffb0	Clean up whitespace, trailing space, bad tab conversion, etc.	2017-08-03 11:20:03 -05:00
Roxy-3D	2cbdc0ebb6	Fix large Z corrections when nozzle moves off of UBL mesh (#7415 )	2017-08-02 16:51:04 -05:00
Florian Heilmann	650e5274c4	Update Russian Translation	2017-08-02 21:19:15 +02:00
Scott Lahteine	ce65c13a97	Merge pull request #7398 from fiveangle/bf_lcd_bed_level_requirements Clarify LCD_BED_LEVELING requirements	2017-08-01 17:46:07 -05:00
Dave Johnson	936dfb965c	Clarify LCD_BED_LEVELING requirements LCD_BED_LEVELING requires PROBE_MANUALLY with auto bed leveling enabled. See #7396	2017-08-01 14:13:54 -07:00
Kai	ffe3013bb5	Fix for #7395 Filament change causes freeze during paused print. This PR disables Filament change in the prepare menu when a print from SD Card is paused. See #7395	2017-08-01 21:45:41 +02:00
Øystein Krog	e948f77cf9	Fix DUAL_X_CARRIAGE not moving at all Axis would only move when homing. Bug introduced in `91841d75c9`. Fixes #6956, fixes #7050 and fixes #7291	2017-07-31 18:44:26 +02:00
Scott Lahteine	08b0456d91	Merge pull request #7379 from thinkyhead/bf_manual_bed_level_floor Manual Bed Leveling: Goto previous Z height at each probe point	2017-07-30 05:41:12 -05:00
teemuatlut	936d00dda8	Implement probing delay for piezo sensors	2017-07-29 21:46:40 -05:00
Scott Lahteine	29eef360d0	Merge pull request #7308 from thinkyhead/bf_cleanup_config_adv Fixes for FWRETRACT	2017-07-29 21:20:19 -05:00
Wilfried Chauveau	894608f8a3	Manual Bed Leveling: Goto previous Z height at each probe point	2017-07-29 21:15:37 -05:00
Scott Lahteine	ff06e1a030	Merge pull request #7372 from tcm0116/delta_calib_menu Move Delta Calibration menu to the Prepare menu	2017-07-29 21:05:03 -05:00
Thomas Moore	15e009b6ca	Move Delta Calibration menu to the Prepare menu	2017-07-28 08:33:18 -05:00
Scott Lahteine	bfd396c13a	Patch to fix some compiler warnings	2017-07-28 02:27:16 -05:00
Scott Lahteine	48c5f3dddf	Tweak kill action #ifdef	2017-07-27 23:42:01 -05:00
Scott Lahteine	be7a9a07c5	Don't reset grid with `G29 Q` + PROBE_MANUALLY	2017-07-27 22:47:43 -05:00
Scott Lahteine	dfe670247d	Merge pull request #7363 from marcio-ao/bugfix-1.1.x Makefile fixes and U8G support.	2017-07-27 21:31:56 -05:00
Marcio Teixeira	af83c512b8	Added support for U8G.	2017-07-27 07:49:25 -06:00
Scott Lahteine	4eff18854b	Rename options with swap_ prefix	2017-07-27 04:14:29 -05:00
Scott Lahteine	14482d2f2a	Strip auto-retract for impossible M(IN\|AX)_AUTORETRACT combo	2017-07-27 04:14:29 -05:00
Scott Lahteine	9fc72422e4	Don't let the flow multiplier affect retract/recover length	2017-07-27 04:14:29 -05:00
Scott Lahteine	fee696db5d	Improve retract() for G10/G11/autoretract	2017-07-27 04:14:29 -05:00
Scott Lahteine	423b0f3a1e	Replace MIN_RETRACT with MIN_AUTORETRACT, MAX_AUTORETRACT	2017-07-27 04:14:29 -05:00
Scott Lahteine	51864fd365	Add bed size as a configuration option	2017-07-26 23:04:54 -05:00
Scott Lahteine	dc7c95e07b	Remove `@ section fwretract`	2017-07-26 22:46:16 -05:00
Dave Johnson	4718c09c48	Remove extraneous USBCON defines for AT90USB boards USBCON is definied by serial.h pullikng in MarlinConfig.h which in turn pulls in Arduino.h. Defining in later includes has shown to cause compile issues so removing all extraneous calls for and potentially easier future linker troubleshooting. more USBCON unification	2017-07-23 16:41:48 -07:00
C. Scott Ananian	890e7a16a9	Add support for Printrbot Neopixel RGBW strip. Connected as described at http://printrbot.com/shop/led-strip/ Based on patch by Kelly Anderson <kelly@xilka.com> at http://www.xilka.com/printrbot/marlin/1.1.4/20170707/	2017-07-22 16:07:55 -05:00
Scott Lahteine	a059e95463	Bring Infitary i3 config up to date	2017-07-21 20:49:19 -05:00
Scott Lahteine	d6d6043548	Merge pull request #7338 from thinkyhead/bf_mks_ps_on_pin MKS 1.3+: Add pin mapping for PS_ON	2017-07-21 20:00:26 -05:00
Alexey Shvetsov	851f9f5399	Update Russian translation - Part 1 Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>	2017-07-21 19:32:37 -05:00
Scott Lahteine	b7a16e4468	Merge pull request #7315 from fixoid/patch-1 Fixing SWITCHING_EXTRUDER feature to work with HOTENDS > 1	2017-07-21 19:10:54 -05:00
Alexey Shvetsov	f38b8c5bf8	MKS 1.3+: Add pin mapping for PS_ON This allows the use of D4 as PS_ON since MKS Gen doesn't have a PS_ON pin. However this effectively allows only 3 servos (instead of 4). Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>	2017-07-21 18:50:05 -05:00
Scott Lahteine	8a3bc6be4d	Improve FWRETRACT config options and commentary Add more details as requested in #7198	2017-07-20 22:57:50 -05:00
Scott Lahteine	b0173ccdb9	Drop extra initializers for vars initialized by EEPROM code	2017-07-20 22:57:49 -05:00
Scott Lahteine	7afafb05b8	Split G10/G11 into separate functions	2017-07-20 02:24:13 -05:00
Scott Lahteine	c45798694f	Add some more requirements to the G-code list	2017-07-20 02:24:13 -05:00
Scott Lahteine	72de280c1e	BARICUDA valve pressure consistently uint8_t	2017-07-20 02:21:40 -05:00
Scott Lahteine	4d98e3f0a7	General cleanup	2017-07-20 02:21:40 -05:00
fixoid	e530c67349	Fixing SWITCHING_EXTRUDER feature	2017-07-19 21:15:26 +03:00
Tannoo	2ad3ca5d8a	Bugfix (#7310 )	2017-07-18 22:55:14 -05:00
Roxy-3D	37a6833d7e	Allow the sampled point to be added into the Least Squares Best Fit (#7289 ) Without this... The LSF won't work because none of the sampled points in this code block get added.	2017-07-13 16:33:02 -05:00
C. Scott Ananian	a519b093b9	Fix build by replacing qr_solve by least_squares_fit. (#7285 ) This was broken by `9af67e2446`.	2017-07-13 12:02:15 -05:00
Scott Lahteine	0873c667fa	Apply coding standards to recent merges	2017-07-13 00:46:16 -05:00
Scott Lahteine	8c2907d10f	Fix ABL broken by recent change	2017-07-12 22:56:18 -05:00
Roxy-3D	9af67e2446	Save 7714 bytes of program memory when doing AUTO_BED_LEVELING_LINEAR (#7276 ) We can save more and a pile of RAM by eleminating the eqnBVector and EqnAMatrix arrays next.	2017-07-10 19:05:11 -05:00
Scott Lahteine	76e90b93b7	Volatile keyword not needed for parser.seen	2017-07-10 15:38:54 -05:00
Jamie Bainbridge	00e4ced58e	Stay in User Menu after command. Add feedback. When a user executes a User Menu command, the LCD returns to the main menu. If the user has multiple menu items they want to run, such as one menu item per bed leveling corner, then it's better to stay in the User Menu rather than return to the main menu. This PR modifies Marlin to stay in the User Menu after a command.	2017-07-10 13:47:12 -05:00
Scott Lahteine	1066b17457	Merge pull request #7260 from thinkyhead/bf_G33_update_27 Updates to G33 and its LCD code	2017-07-10 13:39:36 -05:00
Tannoo	e927941c06	Bugfix (#7265 ) Fix compile error when UBL is enabled but there is no LCD Panel.	2017-07-08 09:44:50 -05:00
Scott Lahteine	68aea9c01d	Merge pull request #7261 from thinkyhead/bf_configs_by_vendor Arrange more example configs by vendor	2017-07-07 15:46:22 -05:00
Tannoo	aaacef9441	Corrections (#7231 ) 20x4 map integration. Also some minor changes to the UBL Menu layout. Both 20x4 LCD's and Graphical LCD panels should have similar functionality now.	2017-07-07 11:05:08 -05:00
LVD-AC	4bc79ec877	Updates for G33-LCD interface	2017-07-07 05:00:59 -05:00
Scott Lahteine	186580b55f	Arrange example configurations by vendor	2017-07-07 04:48:23 -05:00
Scott Lahteine	6be369f3ea	Add some config names to AUTHOR	2017-07-07 04:46:33 -05:00
Scott Lahteine	7fc31a7940	Merge pull request #7258 from thinkyhead/bf_cleanups_jbrazio Add support for BQ heated bed kit with Hephestos 2	2017-07-07 04:11:07 -05:00
Scott Lahteine	11e376e920	Merge pull request #7256 from thinkyhead/bf_cleanup_july_6 Assign -1 to LCD_PINS_D4-7 if not defined	2017-07-07 03:22:47 -05:00
João Brázio	2065591daf	Add support for BQ heated bed kit with Hephestos 2	2017-07-07 03:10:38 -05:00
essgcee	61be28133d	Support for Creality CR-10 Creality board is a Melzi / Sanguinololu variant, but using different pins for LCD control (and maybe other minor variations)	2017-07-06 23:08:10 -05:00
Scott Lahteine	9248a90a4c	Assign -1 to LCD_PINS_D4-7 if not defined	2017-07-06 22:47:51 -05:00
Scott Lahteine	5ef1e5ef60	Tweaks for M43	2017-07-06 21:47:50 -05:00
Scott Lahteine	c7732db99d	Fix: Use of digitalRead, digitalWrite breaks on AT90USB	2017-07-06 21:25:56 -05:00
Scott Lahteine	f713f25fa5	Clean up excess whitespace	2017-07-06 21:24:30 -05:00
Scott Lahteine	fc9ce65095	Add `BUSY_WHILE_HEATING` for hosts that need it	2017-07-06 16:28:57 -05:00
Scott Lahteine	c6d430670a	Clear SHOW_BOOTSCREEN with no LCD	2017-07-06 14:21:27 -05:00
Scott Lahteine	11c589c3ec	Fix compile issue with G38 Fixes #7250	2017-07-06 14:21:27 -05:00
Scott Lahteine	678914be25	Patch M23 to work around Simplify3D bug Addressing #7227	2017-07-06 14:00:58 -05:00
LVD-AC	3efe4aeef8	Add PROBE_MANUALLY support to G33	2017-07-04 18:06:54 -05:00
Scott Lahteine	cca1cca3a5	Merge pull request #7237 from thinkyhead/bf_cz_mapper UTF-8 mapper for Czech	2017-07-04 16:45:13 -05:00
Scott Lahteine	a2babb532d	Merge pull request #7217 from benlye/add-kill-action Add configurable action command to send when printer is killed	2017-07-04 16:44:08 -05:00
Petr Zahradník	8c34233452	UTF-8 mapper for Czech	2017-07-04 15:51:23 -05:00
Dave Johnson	20f6676d63	DISABLE_[XYZ] compatibility check DISABLE_[XYZ] is incompatible with HOME_AFTER_DEACTIVATE and Z_SAFE_HOMING	2017-07-03 17:23:53 -07:00
Ben Lye	c28749a567	Add kill action Sends pre-defined string as action command when printer is kill.	2017-07-03 23:45:19 +01:00
Scott Lahteine	df87278fce	Add "CAP:PRINT_JOB:1" (M75 / M76 / M77) to M115 output	2017-07-03 15:59:06 -05:00
Scott Lahteine	4be8d7720e	Fix spelling of "Chinese"	2017-07-03 15:24:49 -05:00
LVD-AC	567941e341	Fix for issues #6997 and #7152 Probing with the effector in the printing area, but an eccentric probe (e.g. allen key) outside it but still touching the bed gives meaninfull information for calibration. Since calibration is most accurate when probing as close to the towers as possible the testing was way to restrictive hence this fix.	2017-07-03 02:53:49 -05:00
Scott Lahteine	57fff2e95e	Merge pull request #7219 from thinkyhead/bf_update_git_scripts Update Marlin+git helper scripts	2017-07-03 01:49:27 -05:00
Scott Lahteine	6a3967ee33	Corrections for probe_pt parameters	2017-07-03 01:34:27 -05:00
Scott Lahteine	534bffa7a9	Correct comment on ABL G29	2017-07-03 01:13:07 -05:00
Scott Lahteine	e1e1a0c344	Provide a default CUSTOM_BOOTSCREEN_TIMEOUT	2017-07-03 01:13:07 -05:00
Scott Lahteine	69297b2d7b	Make all EEPROM optimization options available	2017-07-02 20:47:03 -05:00
Scott Lahteine	d609489b22	Drop setup_homepin	2017-07-02 02:27:09 -05:00
Scott Lahteine	167169e1bf	Sanity check for a real probe with M48	2017-07-02 02:27:09 -05:00
Scott Lahteine	395a9f59ac	Merge pull request #7211 from thinkyhead/bf_lcd_bootscreen Use lcd_bootscreen for both	2017-07-02 02:11:07 -05:00
Scott Lahteine	14663efe0d	Merge pull request #7210 from fiveangle/printrboard_revf_cleanup Printrboard RevF cleanup	2017-07-02 01:02:26 -05:00
Scott Lahteine	ae5923a3d0	Make lcd_bootscreen common to both	2017-07-02 00:47:36 -05:00
Scott Lahteine	859248433f	Patch for gcode debug	2017-07-02 00:47:35 -05:00
Dave Johnson	09c90c2f6c	Printrboard RevF Cleanup -Update Arduino IDE extension descriptions -Set default motor currents if not defined in Configuration_adv.h -Support for MINIPANEL LCD -Support for choosing internal or panel SD	2017-07-01 22:33:39 -07:00
Scott Lahteine	232a10410d	LCD_FOR_MELZI	2017-07-01 22:32:20 -05:00
Scott Lahteine	76c92a1fab	Clean up some trailing spaces	2017-07-01 22:32:20 -05:00
Scott Lahteine	cf96109056	Implement the EEPROM_CHITCHAT option	2017-07-01 21:48:18 -05:00
Scott Lahteine	dcec7178d1	Expose DISABLE_M503 option as a test option	2017-07-01 21:31:28 -05:00
Scott Lahteine	3e78a01262	Merge pull request #7204 from thinkyhead/bf_update_ubl_lcd UBL radar map corrections	2017-07-01 20:59:03 -05:00
Tom	1ff7d10c80	Add configuration for Infitary M508 (i3 clone) Based on Infitary's own firmware settings.	2017-07-01 20:04:08 -05:00
Scott Lahteine	4cb45c10dd	Patch ubl lcd mesh map indentation	2017-07-01 19:47:52 -05:00
Scott Lahteine	abd6ba62b4	Some cleanups for ubl lcd mesh map	2017-07-01 19:47:49 -05:00
Scott Lahteine	f17bae1f70	Changes for ubl_lcd_map_control patch	2017-07-01 19:47:02 -05:00
Tannoo	8e0f3b7eba	UBL radar map corrections	2017-07-01 19:00:44 -05:00
Bob-the-Kuhn	fcceed5be6	intermittent Teensy & G26 compile problem =============================================== also an issue with ubl_motion.cpp	2017-07-01 14:41:24 -05:00
Scott Lahteine	30b327d24c	Finish the solution for #7166	2017-06-29 15:17:39 -05:00
Scott Lahteine	6c97c5595c	Add a sanity check for DELTA_AUTO_CALIBRATION	2017-06-29 15:03:19 -05:00
Bob-the-Kuhn	e6e3132f79	make LETTTER_OFF return values that match param indices range	2017-06-29 09:01:58 -05:00
Bob-the-Kuhn	bfbf5f8200	correct value_bool() when FASTER_GCODE_PARSER is enabled Also corrected compile issue when DEBUG_GCODE_PARSER and AUTO_BED_LEVELING_UBL are both enabled.	2017-06-28 19:51:08 -05:00
Scott Lahteine	406ef69702	Move Anet A8 config to subfolder	2017-06-28 16:58:57 -05:00
Scott Lahteine	379926961c	Add Anet A6 config, edit Anet A8 config	2017-06-28 16:58:57 -05:00
Scott Lahteine	5b03f23fa2	Bring configurations up to date, fix some comments	2017-06-28 16:41:49 -05:00
Scott Lahteine	e3cedfa0ec	Fix a compiler warning	2017-06-28 16:41:46 -05:00
Scott Lahteine	bb0508b6cf	Fix comment in M115 code	2017-06-28 13:08:33 -05:00
Scott Lahteine	85777a56c6	Add A (action) and E (echo) parameters to M118	2017-06-28 02:07:59 -05:00
Scott Lahteine	d1e8d4cd9d	Merge pull request #7167 from thinkyhead/bf_20x4_lcd_update UBL Map Cleanup and LCD display	2017-06-28 01:20:22 -05:00
Scott Lahteine	b492e0878d	Changes to reduce and simplify	2017-06-28 01:10:30 -05:00
Ben Lye	98d362c2da	Adding M118 command to send text to serial Allows the user to send text to the serial console in order to communicate with a host - sending debuging information or action commands, for example. Text must begin with '//' and this is added if it is not already present at the beginning of the string.	2017-06-28 00:55:20 -05:00
Tannoo	80abc872f3	Updated to better support the coming "radar"	2017-06-27 22:51:58 -05:00
Tannoo	e90cbf5c16	UBL Map Cleanup	2017-06-27 22:51:58 -05:00
Scott Lahteine	fc140c4962	Followup for I2C_POSITION_ENCODERS	2017-06-27 20:46:40 -05:00
Scott Lahteine	f4246dc8ff	Merge pull request #7165 from thinkyhead/bf_parser_shorthand Use parser.seenval, add shorthand functions	2017-06-27 18:57:48 -05:00
Scott Lahteine	bd776df8c1	Optimize seen_axis by moving 'X' to index 24	2017-06-27 18:47:11 -05:00
Scott Lahteine	05449cf6ee	Add shorthand value accessors to gcode.h	2017-06-27 18:39:41 -05:00
Scott Lahteine	12f092c812	Cleanups to gcode.h, use seenval()	2017-06-27 17:57:00 -05:00
Scott Lahteine	941943c167	Apply const, spacing, etc.	2017-06-27 05:23:49 -05:00
Scott Lahteine	5b11b33854	Add support for Průša MK2 Multiplexer	2017-06-27 04:55:30 -05:00
Scott Lahteine	a4a587a897	Fix spelling of Průša	2017-06-27 04:46:46 -05:00
Scott Lahteine	ba1706a265	Fix spacing in gcode.cpp Followup to #6940	2017-06-27 04:46:46 -05:00
Scott Lahteine	c2c8aafda2	Merge pull request #7157 from thinkyhead/bf_g33_f_parameter G33 F and Height bug fix	2017-06-27 04:36:22 -05:00
Scott Lahteine	627afb29df	Merge pull request #7109 from tnw513/fix-italian added missing italian translation	2017-06-27 04:12:30 -05:00
Scott Lahteine	f0f9fb7465	Remove line that does nothing	2017-06-27 04:08:50 -05:00
LVD-AC	99592c8458	Update G33: Add F, fix height bug	2017-06-27 04:02:02 -05:00
Ben Lye	31514f453a	Fix #ifdef AVR_AT90USB1286_FAMILY in pinsDebug Can't compile with PINS_DEBUGING enabled on Atmega1284p because it tries to enumerate pins 46 and 47 (which don't exist) because `#ifdef AVR_AT90USB1286_FAMILY ` doesn't work as expected.	2017-06-27 08:04:40 +01:00
Scott Lahteine	134116b874	Merge pull request #7153 from thinkyhead/bf_czech_update Updated Czech language	2017-06-26 17:34:15 -05:00
Petr Zahradník	e80958b631	CZ Translate BLTouch and UBL Fixup length	2017-06-26 16:15:31 -05:00
Scott Lahteine	fe7e890b09	Fix issues with ADC_KEYPAD Fixes #7150	2017-06-26 16:08:31 -05:00
dot-bob	a1632cfa0a	Added option 'H' to G29 P4. - Added `H` to set a nozzle height adjustment to surface of the bed. - Updated G29 P4 comments to reflect changes.	2017-06-25 17:14:08 -05:00
Scott Lahteine	e687782875	Merge pull request #7134 from thinkyhead/bf_skynet_a3_ready Add Skynet/ANET A10 support	2017-06-25 14:35:22 -05:00
dot-bob	b3c36c98fd	Edit digipot currents via LCD, save to EEPROM	2017-06-25 01:02:36 -05:00
Scott Lahteine	3c7bfe798d	Various cleanups ahead of digipot save	2017-06-24 23:56:24 -05:00
Bob-the-Kuhn	9651d01e1a	Add Skynet/ANET A10 support	2017-06-24 19:07:03 -05:00
Scott Lahteine	eb314373bb	Config spacing & consistency, group custom LCDs	2017-06-24 14:33:40 -05:00
Scott Lahteine	6c45fa7dcc	Apply #elif in LCD conditionals	2017-06-24 13:56:33 -05:00
Scott Lahteine	afbc6e3e2f	Update DELTA/SCARA config comments	2017-06-24 12:47:17 -05:00
Paweł Stawicki	1e47c17b46	Fix: set digipot mcp4018 Vrefmax to 1.666V	2017-06-24 12:35:34 -05:00
Scott Lahteine	80a232419d	CNC workspace planes and 'P' argument for G2/G3	2017-06-23 14:53:03 -05:00
Scott Lahteine	5fb0d401eb	Formatting tweaks	2017-06-23 14:53:02 -05:00
Scott Lahteine	ed04d0b6be	Label DualXMode enums	2017-06-23 14:53:02 -05:00
Scott Lahteine	786cdea124	Ensure REPRAPWORLD_KEYPAD_MOVE_STEP is defined	2017-06-23 14:53:01 -05:00
Scott Lahteine	ee7163fd3a	Fix pinsDebug compile errors	2017-06-23 14:53:01 -05:00
Scott Lahteine	a9f8e518bf	Fix FILAMENT_WIDTH_SENSOR infinite loop issue Addressing #6992 and #5851	2017-06-23 14:53:01 -05:00
Scott Lahteine	254a11b083	Merge pull request #7120 from thinkyhead/bf_sainsmart_link Add link to F. Malpartida LiquidCrystal library	2017-06-22 14:04:23 -05:00
Scott Lahteine	aeb6d465a4	Merge pull request #7118 from thinkyhead/bf_french_update French update	2017-06-22 13:10:07 -05:00
Bob-the-Kuhn	325f09ea6c	Add link to custom LiquidCrystal library by F. Malpartida	2017-06-22 13:07:08 -05:00
MagoKimbra	d26c8cc5c8	fix_planner_refresh_e_positioning (#7103 ) * fix_planner_refresh_e_positioning * Fix	2017-06-22 12:59:22 -05:00
Gege2B	c7f04fbcc7	French translation	2017-06-22 12:49:23 -05:00
Silvio Didonna	4171520729	added missing italian translation	2017-06-21 11:08:39 +02:00
Bob-the-Kuhn	41bfff14e2	Merge pull request #6991 from Bob-the-Kuhn/Mesh-with-babystepping Mesh with BABYSTEP_ZPROBE_OFFSET: add sanity check	2017-06-20 16:36:22 -05:00
Scott Lahteine	424d0bae8b	Merge pull request #7100 from thinkyhead/bf_HAL_prepare Apply maths macros and type changes ahead of HAL	2017-06-20 01:15:23 -05:00
Scott Lahteine	5c59ee4e93	Use current (raw) Z if omitted from G29 WXY or G29 WIJ.	2017-06-20 00:10:52 -05:00
Scott Lahteine	37bc0fce62	Make G29 compatible with M206 Z and G92 Z Use the raw position for mesh measurement. Otherwise the `M206` and `M92` Z offsets will get canceled out by bed leveling. The downside is `G29` will not compensate for a poorly set small `M206` fudge value. To elaborate on this issue, imagine you are probing with a Z home offset of -0.1, meaning when Z homes, -0.1 is the current position, implying the ideal bed zero for the nozzle is 0.1mm higher than the Z endstop. Ordinarily when printing, Z would raise 0.1mm higher. What happens when we probe is that all points are measured with that -0.1 included. So when bed leveling is enabled the `M206 Z` offset gets exactly canceled out by the bed readings.	2017-06-20 00:09:59 -05:00
Scott Lahteine	6c45d0fd81	Apply maths macros and type changes ahead of HAL	2017-06-19 22:57:42 -05:00
Scott Lahteine	8a51e2960c	Improve the experience of editing steps_per_mm	2017-06-19 22:17:15 -05:00
Scott Lahteine	725d9d9a56	Fix and improve LCD value editing display - Fix: When "100.0" changes to "99.0" the LCD shows "199.0" - Use 2 rows if needed on character LCD, (allowing longer labels… Germany, et. al.) - Known issue: A certain length label combined with a certain value drawing function could, for example, display 99.0 on 1 line, but 100.0 on two lines. Workaround would be to pass a nominal value size argument.	2017-06-19 22:17:15 -05:00
Scott Lahteine	499bb85a95	Clean up, put ubl menu itemization closer at hand	2017-06-19 22:17:14 -05:00
Tannoo	90f5f82926	Step-by-Step Menu addition	2017-06-19 20:15:11 -05:00
Scott Lahteine	0c616700f3	Merge pull request #7097 from thinkyhead/bf_dac_percents_fix Convert DAC percent to uint8_t	2017-06-19 17:58:55 -05:00
Florian Heilmann	6dcf42f1a7	Add Z Fade Height to M420 output if it is enabled (#7042 ) * Add Z Fade Height to M420 Output Echo the z-fade height when M420 is called, if it is enabled. * Fix Whitespace * Fix Compiler complaint * Missing semi-colon	2017-06-19 17:53:07 -05:00
Bob-the-Kuhn	a1c65fd3d5	convert DAC percent to uint8_t ===================== add test to Travis	2017-06-19 17:46:41 -05:00
Scott Lahteine	907cafcbfd	Support for two switching extruders	2017-06-19 17:20:59 -05:00
Ross Allan	cfcd069501	Fix #5699 - LIN_ADVANCE freeze when ADV_RATE returns 0	2017-06-19 14:02:17 -05:00
Scott Lahteine	b8b7ef1902	Merge pull request #7090 from thinkyhead/bf_italian_refix Fix Italian language mapper	2017-06-19 09:27:13 -05:00
Scott Lahteine	42f7f9e013	Merge pull request #7060 from bgort/i2cpefix I2C Position Encoders Example Configs	2017-06-19 01:08:42 -05:00
Scott Lahteine	0b49bddec2	Fix Italian language mapper	2017-06-19 01:01:40 -05:00
Silvio Didonna	2e26a7c752	Added missing Italian translations	2017-06-18 23:37:48 -05:00
Scott Lahteine	4c3dc8bf07	Remove set_current_to_destination from resume_print Addressing #7057	2017-06-18 23:01:13 -05:00
Scott Lahteine	4857a3ba48	Formatting and spelling	2017-06-18 23:01:12 -05:00
Thomas Moore	3d24c329af	M600 fixes	2017-06-18 23:00:56 -05:00
Bob-the-Kuhn	8fb30aaed6	warn user of an invalid combination	2017-06-17 15:04:47 -05:00
Bob-the-Kuhn	6cb9bb27fe	Move lcd_refresh_zprobe_zoffset definition	2017-06-16 21:46:33 -05:00
Scott Lahteine	d4270f15a9	Spacing tweak in setup()	2017-06-16 14:21:05 -05:00
Scott Lahteine	c61c0a9aeb	Fix status message missing "blink"	2017-06-16 14:18:19 -05:00
Scott Lahteine	062131554f	Followup to #7045	2017-06-16 14:18:19 -05:00
Jim Brown	3d043976f7	Add option to disallow filament change without homing first	2017-06-16 13:32:17 -05:00
Scott Lahteine	93da4e83f7	One more space on a short status message	2017-06-16 12:58:25 -05:00
Scott Lahteine	7c95f762f2	Show LCD bed options even without thermal protection	2017-06-15 15:29:56 -05:00
Scott Lahteine	92eb55f246	Reject generous donation of trailing whitespace	2017-06-15 15:25:24 -05:00
Scott Lahteine	428be27893	Formatting adjustments	2017-06-15 15:25:24 -05:00
Scott Lahteine	8d5a37fb3d	Support for a 5th stepper in stepper code	2017-06-15 15:25:23 -05:00
Scott Lahteine	7769a22064	Tweaks to temperature code	2017-06-15 15:25:23 -05:00
Scott Lahteine	d9da126776	Cleanups for UBL / ultralcd.cpp	2017-06-15 15:22:36 -05:00
Scott Lahteine	499d5c3b24	Fix scrolling lcd message for DOGM	2017-06-15 15:07:39 -05:00
Scott Lahteine	7164fd499e	Tweak to G33 P error	2017-06-15 14:43:40 -05:00
Scott Lahteine	c10d763d98	Simpler prepare move conditions	2017-06-15 14:43:40 -05:00
Scott Lahteine	4ebff8eaa5	Drop fastio timer cruft	2017-06-15 14:43:40 -05:00
Scott Lahteine	09bc34f4dc	Allow arbitrarily long retraction	2017-06-15 14:43:30 -05:00
Scott Lahteine	4414825e0d	Merge pull request #7038 from thinkyhead/bf_PCA9632 PCA9632 PWM color LED support	2017-06-15 14:41:24 -05:00
Bob-the-Kuhn	9dda022705	fix compile errors ================================ Changed to conditional compile for AT90USB issue	2017-06-15 13:18:14 -05:00
Bob-the-Kuhn	b3338ccb01	Merge pull request #6954 from Bob-the-Kuhn/Software-SPI-for-all-CPUs SD card soft SPI - allow all CPU families to use it	2017-06-15 01:03:39 -05:00
Brian	40bb0cbf7a	example configurations, etc.	2017-06-14 18:04:28 -04:00
Jim Brown	26d20ebcfc	Don't allow filament change without homing first (#7054 )	2017-06-13 17:11:37 -05:00
Roxy-3D	824f71d503	LCD Panel Interactive Mesh Editing (#7045 ) Original Mesh Bed Leveling replacement put at top of UBL Menu Options to help facilitate the removal of the Original Mesh Bed Leveling. Radar display (and control) of the UBL Interactive Mesh Editing.	2017-06-12 18:26:49 -05:00
Scott Lahteine	445227c807	Fix missing LCD_STR_REFRESH	2017-06-12 01:28:52 -05:00
Scott Lahteine	699aa35df6	Code cleanup for G33	2017-06-12 01:25:40 -05:00
dot-bob	0bc66bf22c	PCA9632 PWM color LED support Add support for the PCA9632 PWM color LED driver used on the Ultimaker 2 and Wanhao Duplicator 6.	2017-06-12 01:09:24 -05:00
Luc Van Daele	896dfa0577	G33 eccentric probe fixes (#6850 ) * excentric probe config fix * undo last commit * eccentric probe fix * oops * !stow after each probe * deploy/stow fix * E parameter + bit of cleanup * comment * LCD menu fix	2017-06-12 01:07:19 -05:00
Thomas Moore	e47029199e	Remove ADVANCED_PAUSE_FEATURE requirement for PROBING_HEATERS_OFF (#7000 ) * Remove ADVANCED_PAUSE_FEATURE requirement for PROBING_HEATERS_OFF * Add HEATER_IDLE_HANDLER conditional	2017-06-12 00:22:31 -05:00
Scott Lahteine	8326c1c279	Merge pull request #7005 from Diederikvanderpant/bugfix-1.1.x added shift register pins for reprapworld keypad v1.1	2017-06-11 23:12:11 -05:00
Scott Lahteine	07f8da36d2	CL-260 configs	2017-06-11 19:40:13 -05:00
Scott Lahteine	dce665a083	Merge pull request #7025 from magnuspub/patch-1 Mod in language_it.h	2017-06-11 19:09:46 -05:00
Scott Lahteine	7b09ab6bda	Merge pull request #7033 from Bob-the-Kuhn/pinsDebug-&-dac_mcp4728-fixes Fix pinsDebug problem & add capability to display more than 70 pins	2017-06-11 19:09:09 -05:00
Scott Lahteine	5bdb4bbc5e	Merge pull request #7030 from thinkyhead/bf_circular_scroll Circular scrolling of the status message	2017-06-11 19:07:38 -05:00
Federico	772275ab0c	Create language_it.h	2017-06-11 10:37:34 +02:00
Bob-the-Kuhn	11e28f389e	fix pinsDebug.h error, add capability to display more than 70 pins.	2017-06-10 22:01:15 -05:00
Scott Lahteine	21217d53df	Circular scrolling of the status message	2017-06-10 20:56:00 -05:00
Scott Lahteine	da8e946efb	Reduce size of heater state print code	2017-06-10 20:26:17 -05:00
Scott Lahteine	dde8bb7c8b	Fix extrude_min_temp compiler warning	2017-06-10 20:07:36 -05:00
Scott Lahteine	83263076dc	Merge pull request #7014 from fiveangle/fix_get-set_DrvPct_declarations fix get/setDrvPct declarations	2017-06-10 19:06:50 -05:00
Scott Lahteine	57a51fd5db	Tweak some else clauses	2017-06-10 16:40:10 -05:00
Scott Lahteine	fc89de6d8b	Followup to German language update	2017-06-10 16:27:39 -05:00
Federico	92011e3d8c	Create language_it.h	2017-06-10 21:50:14 +02:00
Dave Johnson	7864b133a8	Fix get/setDrvPct declarations	2017-06-09 20:21:28 -07:00
Scott Lahteine	0b6b7c9c7e	Merge pull request #7013 from thinkyhead/bf_german_update Update language_de.h	2017-06-09 21:41:19 -05:00
Scott Lahteine	f17a3c2474	Merge pull request #6889 from thinkyhead/bf_at90usb_mapping Unify all AVR90USB pin mappings	2017-06-09 21:00:13 -05:00
Kai	5a72b6818e	update language_de.h Following #6990 some more translations and some grammar fixes	2017-06-09 19:45:09 -05:00
Scott Lahteine	4cc5444144	Merge pull request #7008 from Bob-the-Kuhn/Z_MIN_PROBE_ENDSTOP-and-Z_MAX_PIN Can't use "#define Z_MIN_PROBE_PIN Z_MAX_PIN" in configuration.h	2017-06-09 19:42:56 -05:00
Scott Lahteine	51bc50214a	Save 8 bytes of SRAM	2017-06-09 19:20:16 -05:00
Scott Lahteine	748bf32388	Unify AVR90USB: pinsDebug changes	2017-06-09 19:20:16 -05:00
Scott Lahteine	5426fc1735	Unify AVR90USB: Pins cleanup	2017-06-09 18:48:12 -05:00
Scott Lahteine	87d8223251	Unify AVR90USB: Pins remap to Arduino	2017-06-09 18:48:12 -05:00
Scott Lahteine	b378deaf89	Unify AVR90USB: fastio changes	2017-06-09 18:21:57 -05:00
Scott Lahteine	e94f79ccea	Patch some serial macros	2017-06-09 17:17:23 -05:00
Scott Lahteine	d91710e9aa	Followup for UBL translated strings	2017-06-09 16:59:26 -05:00
Scott Lahteine	761df686bd	Minor cleanup in gcode.h	2017-06-09 16:59:26 -05:00
Thomas Moore	897bc2ac1f	Updates for ensure_safe_temperature (#6963 ) * Updates for ensure_safe_temperature * M600 fixes	2017-06-09 15:19:08 -05:00
Bob-the-Kuhn	1c107b3949	delete problem line	2017-06-09 11:53:36 -05:00
Diederik van der Pant	5b270417ed	added shift register pins for reprapworld keypad v1.1 I recently upgraded my Marlin to V1.1.x and decided to publish my fix to make marlin compile properly when #define board megatronics 2 in combination with #define reprapworld keypad v1.1. It was previously described in the comments of a closed pull request. MarlinFirmware#472. All the buttons on the keypad are now operational.	2017-06-09 14:17:47 +02:00
bgort	2f55870edb	[New Feature] I2C position encoder support (#6946 ) * [New Feature] I2C position encoder support I plan to continue improving/cleaning this up, as there areas that need work. * let the cleanups begin. * progress * more progress * comments, rename files, etc. * clean * Cleanups per thinkyhead * a few more cleanups * cleanups, bugfixes, etc. * remove unnecessary passes_test(), additional cleanups/optimizations * cleanups * misc. * Fix up I2CPEM.init() and a few other things. * organize, fix, rename, etc. * more optimization * a few more tweaks	2017-06-09 08:06:23 -04:00
Bob-the-Kuhn	28d72f48f1	change to DWORD	2017-06-08 16:15:02 -05:00
Bob-the-Kuhn	8d1d9040b6	add static	2017-06-08 14:59:21 -05:00
Bob-the-Kuhn	a17ffe1ece	Merge pull request #6985 from Kaibob2/patch-1 Fix for #6980 (case_light compile problem when EXTENDED_CAPABILITIES_REPORT is enabled)	2017-06-08 11:18:56 -05:00
Tannoo	731c8e6372	Translatable Strings for ubl_G29 (#6990 )	2017-06-08 10:09:39 -05:00
Kai	abb6b8ad54	update language_de.h (#6986 ) There was quite a lot to translate this time. I'm not absolutely confident with the whole UBL stuff and it's a PITA to translate. I don't use any kind of levelling myself as i just have a perfectly level cast aluminium plate as bed. So maybe someone who really uses it might take a closer look at it after it's merged.	2017-06-08 10:04:52 -05:00
Kai	c2eff60d3f	Fix for #6980 Line 7830 prevented successfull compilation when #define CASE_LIGHT_ENABLE is uncommented	2017-06-08 09:19:04 +02:00
Scott Lahteine	1419126721	Merge pull request #6965 from thinkyhead/bf_save_more_sram Use createChar_P to save SRAM in bootscreen	2017-06-07 17:34:19 -05:00
Scott Lahteine	a453be7357	Merge pull request #6973 from bgort/autoreportT Enable AUTO_REPORT_TEMPERATURES by default	2017-06-07 17:33:40 -05:00
Scott Lahteine	1d615e0a67	Merge pull request #6976 from Tannoo/Leveling_in_About_Printer Leveling type in About Printer	2017-06-07 17:26:21 -05:00
Scott Lahteine	707707d71a	Fix LCD status message padding	2017-06-07 16:07:38 -05:00
Scott Lahteine	e556ab1dff	Find three-point leveling points on Delta	2017-06-07 16:07:38 -05:00
Scott Lahteine	a27b08e6af	Various code style tweaks	2017-06-07 16:07:38 -05:00
Scott Lahteine	dac29e0f75	Cleaner failure of UBL without EEPROM	2017-06-07 16:07:38 -05:00
Scott Lahteine	9128d9ab45	Improve sanity checks with static_assert, organize	2017-06-07 16:07:38 -05:00
Scott Lahteine	6bb05c4543	Save 20b in smart_fill_mesh with PROGMEM	2017-06-07 16:07:38 -05:00
Scott Lahteine	b7dc4d9973	Save 92b PROGMEM, 14b SRAM with extruder auto fan	2017-06-07 16:07:38 -05:00
Scott Lahteine	c9e3caf928	Save lots of PROGMEM, ~20b SRAM with DIGIPOT_I2C	2017-06-07 16:07:38 -05:00
Scott Lahteine	4134a6b526	Save 88b PROGMEM, 48 bytes SRAM in settings.reset	2017-06-07 16:07:38 -05:00
Scott Lahteine	36cc03a9b4	Save 224b PROGMEM, 48b SRAM in get_homing_bump_feedrate	2017-06-07 16:07:38 -05:00
Scott Lahteine	2a41f0ff84	Save 28b PROGMEM in ultralcd.cpp (line_to_current)	2017-06-07 16:07:38 -05:00
Scott Lahteine	e6d10f6ddd	Spend 48b PROGMEM to save 16b SRAM ...by moving `homing_feedrate_mm_s` to PROGMEM.	2017-06-07 16:07:38 -05:00
Scott Lahteine	97e13a30ba	Save over 100 bytes SRAM in pin_is_protected	2017-06-07 16:07:38 -05:00
Scott Lahteine	45c74406cf	Recover 32 bytes of SRAM in Marlin bootscreen code	2017-06-07 16:07:38 -05:00
Scott Lahteine	e1c5a43247	Cleanup stepper current control config options	2017-06-07 16:07:38 -05:00
Scott Lahteine	efc198f952	Spacing, const, comments	2017-06-07 16:07:38 -05:00
Scott Lahteine	4406fba994	Fixes #6975	2017-06-07 11:14:30 -05:00
Scott Lahteine	d28f5d8a78	Fix: z_endstop_adj is never initialized	2017-06-07 10:29:56 -05:00
Scott Lahteine	5d5ff36446	Fix a compile error with _lcd_set_z_fade_height	2017-06-07 10:29:56 -05:00
Tannoo	b88957e0d4	Leveling type in About Printer Show the Leveling system in use on the About Printer screen.	2017-06-07 06:28:33 -06:00
Brian	dd071a4a65	Enable AUTO_REPORT_TEMPERATURES by default	2017-06-07 02:52:35 -04:00
bgort	8db1197c9b	Enable extended capabilities report by default (#6969 ) Ref #5139	2017-06-07 02:36:34 -04:00
bgort	82e662fc69	Remove requirement for LCD when UBL is used. (#6971 ) * Remove requirement for LCD when UBL is used. * fix previous oversights * further refinement - error messages for P2 & P4 * require R on G26 when not using LCD; default to all points	2017-06-07 02:24:36 -04:00
Tannoo	2c2b991b59	UBL Manual Build Menu Option (#6972 ) One click option to manually build UBL mesh.	2017-06-06 22:14:18 -05:00
Roxy-3D	0dd0033b33	Save up to 94 bytes of RAM on 20x4 LCD Display machines (#6964 ) * Save up to 94 bytes of RAM on 20x4 LCD Display machines Moved the custom screen characters out of RAM into Program Memory. With SD-Card support and the Progress Bar enabled, this saves 94 bytes of RAM memory. This was tested using the example_configurations/FolgerTech-i3-2020 files. So a couple small changes to those files snuck into this Pull Request. Probably... We can find similar savings in the Graphics LCD code it we comb through it. And if so... That is the place we really need to save RAM memory! * Tidy up white space and indentation	2017-06-05 17:02:00 -05:00
Bob-the-Kuhn	ba0bd33c38	Removed check for 2560 family	2017-06-04 22:16:27 -05:00
Scott Lahteine	04b07a6ecc	Unused var in Stepper	2017-06-04 17:25:16 -05:00
Scott Lahteine	eb8af486d2	Ensure safe temperature for M600	2017-06-04 17:25:16 -05:00
Scott Lahteine	bfe7fbe5c0	Maintain message scroll rate	2017-06-04 17:25:15 -05:00
Scott Lahteine	6411d65c48	Fix Morgan SCARA S2 calculation	2017-06-04 12:24:09 -05:00
Scott Lahteine	46752588b9	Merge pull request #6948 from Bob-the-Kuhn/redundant_temperature fix redefinition errors for redundant_temperature	2017-06-04 12:16:09 -05:00
Scott Lahteine	5938dae200	Merge pull request #6950 from MagoKimbra/fix_g29_3_point Fix G29 with 3 point	2017-06-04 12:15:44 -05:00
Scott Lahteine	c5e0f08e35	Merge pull request #6951 from fixoid/patch-4 Initializing extruder/nozzle servo when turning on the printer	2017-06-04 12:13:05 -05:00
Scott Lahteine	e4937b0285	Cleanup of spacing and formatting	2017-06-04 11:31:43 -05:00
fixoid	1aab9906e6	Initializing extruder/nozzle servo when when turning on the printer	2017-06-04 16:57:24 +03:00
MagoKimbra	663ff7f92a	Fix G29 with 3 point	2017-06-04 14:39:31 +02:00
oldmcg	9f295581f0	Ubl delta fixes and improvements (#6941 ) * Change all direct changes of ubl.state.active to set_bed_leveling_enabled() which handles apply/unapply leveling to maintain current_position consistency. Fix invalidation of UBL mesh to invalid unreachable mesh points as well (delta corners). Fix UBL_DELTA unapply_leveling logic and when it gets applied, including fade_height changes. Add optional M114 D for detailed position information, disabled from compilation by default (M114_DETAIL). * UBL_DELTA raw and inline kinematics * UBL planner fall through fix * consistent variable names * Cleanup orphaned code and whitespace changes. Use _O2. * compile warnings cleanup * Remove redundant #ifdef condition	2017-06-03 17:11:43 -05:00
Bob-the-Kuhn	c34d7a29a6	fix redefinition errors for redundant_temperature Removing redundant_temperature from public section and leaving it in the private section	2017-06-03 16:40:14 -05:00
Bob-the-Kuhn	6a5d3b580d	fix "hex_address not defined" when UBL is enabled	2017-06-03 13:19:55 -05:00
Scott Lahteine	789b2928a8	Tweak scrolling message code	2017-06-02 23:45:53 -05:00
Scott Lahteine	fc7d7f87b4	Init probe test pin with FastIO	2017-06-02 23:45:52 -05:00
Scott Lahteine	0282452cea	Make Parser::seen volatile	2017-06-02 23:45:52 -05:00
Scott Lahteine	9a305a467b	Patch LCD Contrast menu item	2017-06-02 23:45:52 -05:00
Scott Lahteine	90ccac4bcf	Clean up after recent commits	2017-06-02 23:45:52 -05:00
Bob-the-Kuhn	2130f10de8	allow space between parameter and value	2017-06-02 19:57:22 -05:00
Bob-the-Kuhn	ebda4663c3	for discusion	2017-06-02 19:42:43 -05:00
FATALHERMIT	911079104e	Support for ZRIB v2.0 Control Board	2017-06-02 12:05:46 -05:00
Scott Lahteine	65a0212866	Easier override of FILWIDTH_PIN	2017-06-02 12:05:46 -05:00
Scott Lahteine	147d9d76fc	Merge pull request #6928 from Bob-the-Kuhn/Fix-case-light-logic-on-Azteeg-X3-boards Fix case light logic on Azteeg_X3 boards.	2017-06-01 20:14:15 -05:00
guntherv73	4288c4fb4f	Configurations for Malyan M150	2017-06-01 19:26:29 -05:00
Scott Lahteine	1919cb0d1e	Config cleanups	2017-06-01 19:26:16 -05:00
Bob-the-Kuhn	9a9bbfc57c	Fix case light logic on Azteeg_X3 boards.	2017-06-01 12:33:24 -05:00
Thomas Moore	a32f7b329c	Fix heater status display for advanced pause	2017-06-01 12:29:47 -05:00
Scott Lahteine	445865ea03	REPRAPWORLD_KEYPAD is NEWPANEL but not ULTIPANEL	2017-05-31 23:48:03 -05:00
Scott Lahteine	4296a8b74e	For status scrolling, pad a short message	2017-05-31 23:48:03 -05:00
Scott Lahteine	4a96433b7e	Simplify counting of printable characters	2017-05-31 23:45:41 -05:00
Scott Lahteine	8d69394ae1	Fix LCD printing of progmem strings	2017-05-31 23:36:57 -05:00
Scott Lahteine	c74d4dede6	Prevent illegal leveling combinations Addressing issue #6901	2017-05-31 23:36:57 -05:00
Scott Lahteine	155aa62fb0	Merge pull request #6912 from thinkyhead/bf_better_pulse_delay Account for dual XYZ in pulse delay cycles estimate	2017-05-31 22:21:47 -05:00
Scott Lahteine	a5fa586642	Preferred patch to gcode.h	2017-05-31 21:18:16 -05:00
Bob-the-Kuhn	1b41e1f645	another compile error only seen if #if ENABLED(TEMPERATURE_UNITS_SUPPORT) ... #if ENABLED(ULTIPANEL) && DISABLED(DISABLE_M503)	2017-05-31 13:59:49 -05:00
Bob-the-Kuhn	65bd4c8c94	Merge pull request #6797 from Bob-the-Kuhn/M355-case-lightimprovements-(1.1.x) M355 case light improvements (replaces PR #5685)	2017-05-31 13:33:59 -05:00
Bob-the-Kuhn	9657e7d3ee	copied file changes from PR #5685 ============================== Configuration_adv.h changes ============================== add "live" LCD update ============================== P & S version ============================== final (hopefully) tested version ============================== update M115 capabilities print ============================== Menu changes portion of the requested changes ============================== changed USEABLE_HARDWARE_PWM from a function to a series of macros ============================== changes per review	2017-05-31 13:22:38 -05:00
Bob-the-Kuhn	8206bb9bb9	fix compile error invalid conversion from 'const char' to 'char' [-fpermissive]	2017-05-31 13:17:01 -05:00
Scott Lahteine	df91346188	Account for dual XYZ in pulse delay cycles estimate	2017-05-31 12:23:28 -05:00
Scott Lahteine	7236109f2a	Patch M24 / M125 for delta	2017-05-30 23:07:29 -05:00
Scott Lahteine	be17033762	Fix case light menu toggle	2017-05-30 14:03:45 -05:00
Scott Lahteine	89b93058e3	Merge pull request #6887 from christianh17/PR-sanitycheck enable DEACTIVATE_SERVOS_AFTER_MOVE with switching nozzle	2017-05-30 13:43:39 -05:00
Scott Lahteine	05b66234ae	Merge pull request #6895 from thinkyhead/bf_user_commands Custom user commands menu	2017-05-30 13:40:50 -05:00
Scott Lahteine	84a0a77c59	Merge pull request #6852 from tcm0116/mixing_extruder_lin_advance Generate error if MIXING_EXTRUDER and LIN_ADVANCE are both enabled	2017-05-30 13:37:51 -05:00
Scott Lahteine	266ae8912a	Formatting in _draw_heater_status	2017-05-30 03:32:16 -05:00
Scott Lahteine	6b9ca16f36	Patch lcd_print edge limit code	2017-05-30 03:32:15 -05:00
Tannoo	74d6dee920	User Command (Script) Menu The menu (commands / scripts) is configurable in `Configuration_adv.h`. - Added conditionals. - Changed script handling. - Slimmed and working! - Added Status message. - Returning to lcd status screen now! - Example Configs Updated. - Cleanups by @thinkyhead	2017-05-30 02:33:57 -05:00
Scott Lahteine	d9c8072037	Edit PROPORTIONAL_FONT_RATIO comment	2017-05-30 01:29:39 -05:00
Scott Lahteine	46b32e4548	Cleanup LCD interface, add lcd_reset_status	2017-05-29 22:16:13 -05:00
Scott Lahteine	ca99d67ede	Fix UBL "Info screen" menu items	2017-05-29 19:55:26 -05:00
Scott Lahteine	2c7a39bc0e	Fix LCD print aborted message	2017-05-29 19:52:01 -05:00
Scott Lahteine	0f1e8c195d	Draw on LCD after value has changed	2017-05-29 19:42:30 -05:00
Scott Lahteine	51587c4b43	Rename Feedrate to Velocity to match prior naming	2017-05-29 17:54:15 -05:00
Scott Lahteine	9677f3f2f5	Patch up LCD Bed Leveling menu	2017-05-29 17:51:11 -05:00
Scott Lahteine	fc2eaab7f3	Show home option in level bed menu	2017-05-29 17:51:10 -05:00
Scott Lahteine	c6a7adc293	Patch G29 A and Q arguments to bypass setup	2017-05-29 17:51:10 -05:00
Scott Lahteine	4cece2d72e	Use NAN for G29 W omitted parameters	2017-05-29 17:51:10 -05:00
Scott Lahteine	2d71569138	Fix spacing in JSON output	2017-05-29 17:51:10 -05:00
Scott Lahteine	b2d3c8aedd	Have G28 do a refresh of the display	2017-05-29 17:51:10 -05:00
Scott Lahteine	50ab9c2e04	General cleanup of spacing, comments	2017-05-29 15:34:14 -05:00
Scott Lahteine	f1e33afda4	Return to Bed Leveling menu when done	2017-05-29 15:31:02 -05:00
Scott Lahteine	78d8c598e1	Fix lcd_synchronize with message	2017-05-29 15:31:02 -05:00
Scott Lahteine	eb39d6e3e2	Don't draw progress bar until it has 1%	2017-05-29 15:31:01 -05:00
Scott Lahteine	194f8b2f55	Start at Z=0 in manual probing	2017-05-29 15:31:01 -05:00
Scott Lahteine	6f89db11f0	Allow lcd_setstatusPGM to reset the alert level	2017-05-29 15:31:00 -05:00
Scott Lahteine	3fe333143c	Case light as a toggle menu item	2017-05-28 14:32:07 -05:00
Scott Lahteine	d013bddfa8	Merge pull request #6876 from thinkyhead/bf_extend_leveling_menu Extend the ABL/MBL Bed Leveling menu	2017-05-28 14:19:02 -05:00
Scott Lahteine	01e7e234c6	Add more options to the Bed Leveling menu	2017-05-28 14:04:28 -05:00
Scott Lahteine	0cbe448edf	Split up Control > Motion submenu	2017-05-28 12:52:24 -05:00
Scott Lahteine	a3645ec921	Reference op with variable name	2017-05-28 11:33:22 -05:00
Scott Lahteine	71367fd518	Scrolling status message option	2017-05-28 11:26:28 -05:00
Scott Lahteine	b0eae68f57	Prevent bed temperature being set too high	2017-05-28 11:11:17 -05:00
Scott Lahteine	493f0b0c62	Fix some compiler warnings	2017-05-28 11:06:33 -05:00
christianh17	f379a326cc	enable DEACTIVATE_SERVOS_AFTER_MOVE with switching nozzle When using switching nozzle it should be possible to disable the servo after move. Do it only if you do not need the servo power to keep the position.	2017-05-28 15:33:28 +02:00
Scott Lahteine	33279a1e02	Code style tweak to gcode.h	2017-05-27 19:47:26 -05:00
Ernesto Martinez	ac959b12ee	Updates to language_es.h based on latest updates. (#6871 ) Spanish language updates	2017-05-27 19:08:39 -05:00
Scott Lahteine	55c700d537	Tweak to gcode.h	2017-05-26 22:11:31 -05:00
Bob-the-Kuhn	868e7db4ae	value check was looking at the code	2017-05-26 14:49:42 -05:00
Thomas Moore	fb5e0ffe16	Unify M600 and M125 pause features (#6407 ) * Unify M600 and M125 pause features * Cleanup per thinkyhead's comments * Rename filament_change_menu_response to advanced_pause_menu_response * Include HAS_BED_PROBE in QUIET_PROBING * Update gMax example file * is_idle() is out of scope without the braces * Convert FT-i3-2020 to Advance Pause names... * Allow pause even if not printing	2017-05-26 13:01:02 -05:00
Scott Lahteine	b3a97b5013	Patch up LCD level bed menus	2017-05-25 23:53:31 -05:00
Scott Lahteine	78af2b1444	Fix PROBE_MANUALLY via G-code	2017-05-25 23:53:31 -05:00
Scott Lahteine	082da23391	One fewer EOL in M503 output	2017-05-25 23:53:31 -05:00
Scott Lahteine	b15e531464	Fix screen change on character display	2017-05-25 15:29:14 -05:00
Thomas Moore	44e657766e	Add incompatibility error to Sanity Check for MIXING_EXTRUDER and LIN_ADVANCE	2017-05-25 08:06:27 -05:00
Scott Lahteine	735405b2a4	Merge pull request #6848 from thinkyhead/bf_scara_M665 Add M665 for SCARA	2017-05-24 20:51:51 -05:00
Scott Lahteine	ffa901f373	Merge pull request #6839 from thinkyhead/bf_day_ending_in_y UBL ultralcd.cpp patches	2017-05-24 17:55:44 -05:00
Scott Lahteine	361cbba113	Use M665 to set SCARA angle offsets	2017-05-24 17:49:24 -05:00
Scott Lahteine	5ed63a5724	Apply const in prepare_kinematic_move_to	2017-05-24 17:49:24 -05:00
Scott Lahteine	5cbe0244c5	Fixes for spindle/laser and SCARA probe bounds	2017-05-24 17:49:23 -05:00
Scott Lahteine	1f52c9f5df	Neater Megatronics 3 pins	2017-05-24 17:49:23 -05:00
Scott Lahteine	af81cb4cbb	Patch for M503 output	2017-05-24 17:49:09 -05:00
Scott Lahteine	1d167a6874	Some cleanup, fixes for ultralcd.cpp UBL code - Free up 30 bytes of SRAM in UBL LCD code - Fix BUILD_ABS_MESH temperature - Fix UBL indentation in ultralcd.cpp - UBL vars lowercase, "convert to positive" sensibly	2017-05-24 01:10:42 -05:00
Scott Lahteine	f4028fe088	New GCode Parser - Implementation	2017-05-23 14:15:10 -05:00
Scott Lahteine	002a06c507	New GCode Parser - Configuration	2017-05-23 14:15:07 -05:00
Scott Lahteine	ad915b667e	One more mesh_index_to_npos update Followup to #6827	2017-05-23 13:02:50 -05:00
Scott Lahteine	2881f0a48d	Fix, extend G42 with P (probe) parameter - Also fix handling of SCARA and misuse of `codenum`.	2017-05-23 04:55:42 -05:00
Scott Lahteine	d252d1b6a2	Merge pull request #6831 from thinkyhead/bf_move_g7 Move G7 to G42	2017-05-23 03:02:57 -05:00
Brian	82ca6248e2	Move G7 to G42 See: #6777	2017-05-22 23:21:35 -05:00
Scott Lahteine	26ffa558a3	Use redraw flag for both types of LCD	2017-05-22 18:34:54 -05:00
Scott Lahteine	3ff7515527	Merge pull request #6817 from cbusillo/patch-1 missing enable for M605 for duplication mode	2017-05-22 18:07:11 -05:00
Scott Lahteine	34cfbc90cd	Use new attribute macros in more places	2017-05-22 17:38:58 -05:00
Scott Lahteine	85b967657e	Embed G26/G29 in ubl class, with enhancements	2017-05-22 17:38:58 -05:00
Scott Lahteine	c99bd69889	Apply const float & more	2017-05-22 17:38:36 -05:00
Scott Lahteine	ad5638f78c	Cleanup some fastio code	2017-05-22 17:38:36 -05:00

... 18 19 20 21 22 ...

8445 commits