11781 commits

Author	SHA1	Message	Date
Marcio Teixeira	263d7d37af	"SD card" => "Media" (#14951)	2019-08-14 17:52:14 -05:00
Scott Lahteine	24ce8beb48	[cron] Bump distribution date	2019-08-14 00:00:11 -05:00
Tanguy Pruvot	4cc103958e	Alfawise Flash EEPROM, Z Servo Probe (#14877)	2019-08-13 23:41:17 -05:00
Joseph Bozarth	0fbb26c28f	M16 - Expected Printer Check (#14924)	2019-08-13 23:38:45 -05:00
Scott Lahteine	a26b57a36d	Minor pins cleanup	2019-08-13 19:40:08 -05:00
Acenotass	059f575d93	Update Russian language (#14940)	2019-08-13 19:19:44 -05:00
Timothy Hoogland	a67830bf67	TH3D EZBoard is LPC1769 (#14936)	2019-08-13 00:03:42 -05:00
Tanguy Pruvot	c6be989fca	Store EEPROM config in flash (#14923) ... Avoid confusion between the 2 possible SDs...	2019-08-12 19:48:46 -05:00
Marcio Teixeira	13d8dc0b79	Fix incorrect print stat in ExtUI (#14881)	2019-08-10 19:25:30 -05:00
Marcio Teixeira	dc21e2e691	Increase XY nozzle offset range (#14882)	2019-08-10 19:24:41 -05:00
Marcio Teixeira	fa533846a7	Bury easter egg deeper (#14883)	2019-08-10 19:23:37 -05:00
Giuliano Zaro	af4bcb629a	SAMD51 typo fix (#14885)	2019-08-10 19:22:48 -05:00
Ludy	d7172a4558	Cleanup and conditions (#14886)	2019-08-10 19:22:18 -05:00
Johnny Eshak	03dbe16ccc	Compiling M43 on invalid conversion (#14897)	2019-08-10 19:20:40 -05:00
Giuliano Zaro	f085199f5b	SAMD51: Some LCD pin fixes (#14915)	2019-08-10 19:19:52 -05:00
Giuliano Zaro	d78086ccdc	SAMD51: Neopixel pin mapping (#14913)	2019-08-10 19:18:32 -05:00
Eric Ptak	9c5086e6af	[STM32F1] Simpler Flash EEPROM (#14829)	2019-08-10 19:14:31 -05:00
Tanguy Pruvot	0745d48993	Fix build with and without TOUCH_BUTTONS (#14912)	2019-08-10 18:22:11 -05:00
Tanguy Pruvot	5d2519ed50	Allow use of Fysetc SoftwareSerialM (#14893)	2019-08-10 01:45:36 -05:00
Robby Candra	d2d71caa3b	Clean up Touch pins. Better up/down touch response. (#14900)	2019-08-10 01:42:52 -05:00
Tanguy Pruvot	8cc0b4bf5e	Revert "Edit STEPS_PER_MM integer only" (#14909) ... This reverts commit 2d98bb39bd.	2019-08-10 00:58:21 -05:00
Giuliano Zaro	3129fd06f0	SAMD51: Update LCD pins (#14907)	2019-08-10 00:56:55 -05:00
Ludy	9479ec32f7	Fix Service Menu compile error (#14903)	2019-08-10 00:53:26 -05:00
Giuliano Zaro	a7f1021265	Fix SPI_ENDSTOPS compile error (#14906)	2019-08-09 17:00:20 -05:00
Chris Pepper	2971b48a12	Use PlatformIO 4 default dir structure (#14879)	2019-08-08 08:29:33 -05:00
Scott Lahteine	9624c90cfb	Remove HAL.h dependency in SoftwareSerial.h	2019-08-08 07:43:57 -05:00
Scott Lahteine	a6f682d860	[cron] Bump distribution date	2019-08-08 06:39:53 -05:00
Fourmi	eb3a3d249e	Fix TouchMI probe movement (left side) (#14875)	2019-08-08 02:40:48 -05:00
Tanguy Pruvot	535018ef0e	STM32F1: Dummy SoftwareSerial (as TMCStepper fallback) (#14861)	2019-08-08 02:25:52 -05:00
Ludy	528c9885f2	Fix wait_for_user + PAUSE_BEFORE_DEPLOY_STOW issue (#14831)	2019-08-08 01:52:20 -05:00
Scott Lahteine	c8e30b6639	Fix code attempting to sprintf %f (#14869) ... Arduino doesn't (always) support `float` formatting in strings. So either cast to `int` or use `dtostrf()` to fix these usages.	2019-08-08 01:51:37 -05:00
Tanguy Pruvot	92c35d14a4	Non-fatal error from ps::access_start (#14845)	2019-08-07 00:43:00 -05:00
Tim Moore	77f637763c	Overlord configs. Fix buzzer, redundant temp. (#14833)	2019-08-06 23:25:47 -05:00
Giuliano Zaro	535eeace5f	Fix Bed, Chamber ADC condition (#14866)	2019-08-06 22:57:54 -05:00
Acenotass	3914bcfbb1	Russian correction (#14862)	2019-08-06 22:56:51 -05:00
Tim Moore	0fa7d86918	Fix thermistor names (info menu) (#14860)	2019-08-06 22:54:18 -05:00
Tanguy Pruvot	eecfcd124d	Finish STM32F4 SD-based settings storage (#14844)	2019-08-06 22:53:11 -05:00
Scott Lahteine	a0d782e46e	STM32F7xx is gone	2019-08-06 04:58:58 -05:00
Scott Lahteine	fd9f067a48	Robin FSMC / SPI pins	2019-08-06 04:57:49 -05:00
Scott Lahteine	579e4396e2	Reduce STM32_F4_F7 pin warnings	2019-08-06 04:57:15 -05:00
Scott Lahteine	fb579212ea	Reduce unused function warnings	2019-08-06 04:56:17 -05:00
Scott Lahteine	fc39c925ca	Grace period followup	2019-08-05 22:00:49 -05:00
Scott Lahteine	a9c5d524bb	Followup to MAX7219 / KILL_PIN patch ... Co-Authored-By: Roxy-3D <roxy-3d@users.noreply.github.com>	2019-08-05 21:42:33 -05:00
Chris Pepper	f499cecf0d	Marlin Binary Protocol Mark II (#14817)	2019-08-05 20:41:53 -05:00
Robby Candra	5bc2fb022c	THERMAL_PROTECTION_GRACE_PERIOD is obsolete (#14798)	2019-08-05 20:33:15 -05:00
Jason Smith	534c105a7a	Fix 16-bit range check in TMenuItem::action_edit (#14834)	2019-08-05 20:02:29 -05:00
Acenotass	4af9908764	Update M48 command in the status line (#14816)	2019-08-05 20:01:40 -05:00
Scott Lahteine	8f0aedeead	Reorder some language defines	2019-08-05 19:12:00 -05:00
Roxy-3D	6fdb0bec07	Resolve Kill pin & Max7219 Clock conflict on TREX-2+	2019-08-05 14:36:50 -05:00
teemuatlut	d4974ea719	TMC SPI Endstops and Improved Sensorless Homing (#14044)	2019-08-04 22:22:58 -05:00
Giuliano Zaro	d493cafc4a	Fix a memset pointer cast (#14823)	2019-08-04 22:06:36 -05:00
Scott Lahteine	4e58f9387a	Onboard SD for MKS Robin ... In response to #9771	2019-08-04 21:17:45 -05:00
Scott Lahteine	2d98bb39bd	Edit STEPS_PER_MM integer only	2019-08-04 19:39:52 -05:00
Tim Moore	e3660bca25	Overlord printer thermistor (#14815)	2019-08-03 20:57:56 -05:00
George Fu	f89eb8bf35	Fysetc Cheetah updates (#14800)	2019-08-03 18:12:35 -05:00
Tanguy Pruvot	4bd1e55093	STM32F1: Init EEPROM SPI pin modes (#14810)	2019-08-03 18:11:06 -05:00
Scott Lahteine	52a7a8cb26	Fix HOST_PROMPT_SUPPORT without LCD	2019-08-02 11:35:04 -05:00
Scott Lahteine	18c9182903	Match up write_data signatures	2019-08-02 11:09:07 -05:00
Scott Lahteine	2e27e3ba04	Patch up Teensy 3.1/3.2 pins, tests	2019-08-02 10:01:55 -05:00
Ludy	337361d588	Update German language, (c) (#14804)	2019-08-02 09:21:28 -05:00
Scott Lahteine	8119e511a1	Patch some (c) messages	2019-08-02 07:47:33 -05:00
yangwenxiong	6132cf900b	STM32F4x SD-based settings storage (#14808)	2019-08-02 07:40:27 -05:00
Giuliano Zaro	21993b75f4	SAMD51 Servo class (#14781)	2019-08-02 07:37:41 -05:00
Scott Lahteine	e85eca2630	HAL cleanup, Teensy 3.1 platform	2019-08-02 07:22:26 -05:00
Tim Moore	940c59d9da	Overlord i2c LCD with LEDs and buzzer (#14801)	2019-08-02 06:19:45 -05:00
Scott Lahteine	e1942715ce	HAL_STM32F1_EEPROM_SIZE => HAL_EEPROM_SIZE	2019-08-02 06:18:36 -05:00
Scott Lahteine	ee5e46b46b	Patch PrintJobRecovery::filename	2019-08-02 05:21:55 -05:00
Scott Lahteine	fd945d1070	More generic EEPROM data array name	2019-08-02 04:40:34 -05:00
Tanguy Pruvot	3334163e73	STM32F1: Align SD EEPROM data for SDIO (#14809)	2019-08-02 04:12:46 -05:00
Scott Lahteine	70ce4f5b36	Move job recovery filename	2019-08-02 02:24:15 -05:00
Scott Lahteine	9ac348ef7b	SDPOWER => SDPOWER_PIN	2019-08-02 02:24:15 -05:00
Scott Lahteine	5e2582a31b	Comment spacing	2019-08-02 02:24:15 -05:00
mekius	7682751646	Fix HOME_BACKOFF_MM type (#14805)	2019-08-01 20:32:45 -05:00
Robby Candra	96a1c6540e	Use title case for menu items (#14806)	2019-08-01 20:31:58 -05:00
InsanityAutomation	f59a7e8b07	Print/display ABL current probe point (#14788)	2019-08-01 20:11:26 -05:00
Tim Moore	3765e67434	Dreammaker Overlord pins (#14791)	2019-07-31 21:15:36 -05:00
InsanityAutomation	6f8b8c394d	Homing backoff per-axis / delta Z (#14789)	2019-07-31 20:50:23 -05:00
Benjamin Reed	0c035c0a7a	Fix 'pause_menu_response' compile error (#14792)	2019-07-31 17:21:25 -05:00
Tanguy Pruvot	3db1a80b4c	Update French language (#14787)	2019-07-31 17:10:14 -05:00
Scott Lahteine	c2b319360d	Remove extra pragmas	2019-07-30 20:19:47 -05:00
Tanguy Pruvot	202d3ab3c9	Define STM32F1 GPIO for the preprocessor (#14785)	2019-07-30 18:58:03 -05:00
Eric Ptak	fdbc733376	Return 'false' on EEPROM connection fail (#14776)	2019-07-30 17:43:45 -05:00
Robby Candra	128eed6b57	Option to reverse select direction/buttons (#14693)	2019-07-30 17:42:57 -05:00
Gustavo Alvarez	27952648cf	Fix M122 column alignment (#14779)	2019-07-30 17:11:17 -05:00
Giuliano Zaro	eb08aeab7d	Update Italian language (#14782)	2019-07-30 17:09:01 -05:00
pinchies	d98b9d54f1	JGAurora A5S & A1 touch support (#14768)	2019-07-30 17:08:11 -05:00
Scott Lahteine	c1b99c43b6	[cron] Bump distribution date	2019-07-30 05:07:39 -05:00
InsanityAutomation	0b154c2d71	Enable runout sensor in EEPROM by default (#14771)	2019-07-30 05:01:56 -05:00
Scott Lahteine	bc58e678bd	More general FSMC display option	2019-07-30 04:25:55 -05:00
Scott Lahteine	c942ca130f	More general TOUCH_BUTTONS comment	2019-07-30 04:22:27 -05:00
Acenotass	659d06d9b9	M48 menu item, result to status (#14772)	2019-07-30 02:31:14 -05:00
rafaljot	e44fccf3d2	Add support for M575 (#14757)	2019-07-30 02:30:00 -05:00
MarcelMo	f8aa52346f	Configurable Z move distance (#14593)	2019-07-30 02:16:26 -05:00
Scott Lahteine	842466f4d9	Mixer patch, etc.	2019-07-29 22:20:28 -05:00
Scott Lahteine	1165c26ab4	Trailing whitespace	2019-07-29 19:46:54 -05:00
Scott Lahteine	eae543adf3	Apply HAS_SPI_LCD as needed	2019-07-29 18:55:05 -05:00
Scott Lahteine	8837cd3b53	[cron] Bump distribution date	2019-07-29 18:46:40 -05:00
Marcio Teixeira	eb7840dabb	Match select item to encoder direction (#14673)	2019-07-29 00:02:42 -05:00
Scott Lahteine	e5d73f68c8	HAL folder organization (#14763)	2019-07-28 23:55:24 -05:00
Marcio Teixeira	eefe3f595a	New options: Bootscreen as Info, game Easter-egg (#13829)	2019-07-28 22:47:20 -05:00
Scott Lahteine	180f9a4c22	Remove obsolete info menu includes	2019-07-28 20:20:33 -05:00
Ludy	c4bb458763	BUZZ cleanup (#14760)	2019-07-28 19:14:50 -05:00
Scott Lahteine	6b02b89ab4	Update serial sub-unit descriptions	2019-07-28 17:38:37 -05:00
mikeshub	1579091c20	PID loop improvements (#14746) ... * Fix macro evaluation in `temperature.cpp` * Improve bed PID, PID debug output * Add min PID power define	2019-07-28 15:50:25 -05:00
thisiskeithb	e8e81d3609	Fix MKS Robin Lite pins include (#14755)	2019-07-28 14:56:05 -05:00
Giuliano Zaro	290466578f	Adafruit Grand Central M4 (#14749)	2019-07-28 14:48:29 -05:00
Marcio Teixeira	fec52e61ea	Use shared memory space for game data (#14727)	2019-07-28 01:44:16 -05:00
Scott Lahteine	17abb94532	Whitespace patch	2019-07-28 01:29:23 -05:00
Ludy	97e9c95f47	Fix & clean up ExtUI (#14748)	2019-07-27 22:44:05 -05:00
Eric Ptak	59e97e5e52	FYSETC Cheetah 1.2 (#14723)	2019-07-27 21:21:54 -05:00
InsanityAutomation	2351592abf	Overridable TMC serial pins, update TMC2209 docs (#14751)	2019-07-27 20:34:22 -05:00
thisiskeithb	d74efd9d46	MKS Robin Lite/Lite2 Board Support (#14729)	2019-07-27 04:43:37 -05:00
Marcio Teixeira	1c3df51f87	vsnprintf patch redux (#14725)	2019-07-27 04:34:49 -05:00
Bo Herrmannsen	bf610d87f7	Fix a bad MKS SGen-L pin (#14735)	2019-07-27 04:18:49 -05:00
Fourmi	d34364a086	Default TOUCH_MI_DEPLOY_XPOS to min X (#14736)	2019-07-26 21:57:13 -05:00
Ludy	ead6bb267d	Add Z3 SanityCheck, revert early sanity change (#14717)	2019-07-24 22:32:49 -05:00
Scott Lahteine	a3dc1e461b	Update M7219 comment, tweak parameter code	2019-07-24 21:09:51 -05:00
Chris Pepper	b6095fd084	Reduce default LPC176x ADC lowpass filtering	2019-07-25 00:40:51 +01:00
Scott Lahteine	1088846cae	Cosmetic updates from 14044	2019-07-24 01:52:36 -05:00
Scott Lahteine	05f4033a34	Prevent a name conflict in u8g impl file	2019-07-24 01:01:03 -05:00
Marcio Teixeira	585a8a96b4	Fix extraneous redefine of vsnprintf_P in Marduino.h (#14712)	2019-07-23 17:18:53 -05:00
Giuliano Zaro	7085781c71	Include configs in serial.h (#14714)	2019-07-23 16:40:54 -05:00
Marcio Teixeira	369fb2806d	Fix compilation warnings, errors (#14704)	2019-07-22 20:08:54 -05:00
Scott Lahteine	a589456a14	Tweak mark/range/quantity conditions	2019-07-22 07:16:42 -05:00
Scott Lahteine	601b2d9f51	Send slightly less data to Max7219	2019-07-22 07:16:42 -05:00
Scott Lahteine	79f49040f1	Patch some Max7219 comments	2019-07-22 07:14:07 -05:00
Scott Lahteine	5c3ec6306f	Max7219 side-by-side arrangement (#14702)	2019-07-22 05:22:21 -05:00
Scott Lahteine	a7c41d28af	Max7219 non-functional tweaks	2019-07-22 04:24:16 -05:00
Giuliano Zaro	1005f225f3	Remove unused defines, fix typo (#14699)	2019-07-21 21:44:03 -05:00
mikeshub	d9303b2137	Fix MAX6675_SEPARATE_SPI boot loop (#14698)	2019-07-21 21:36:00 -05:00
Scott Lahteine	f96d2a5b4a	Update pins_STEVAL.h	2019-07-21 21:25:14 -05:00
Tanguy Pruvot	dca0c3d02a	Fix SPI comments, clean up U20 pins (#14700)	2019-07-21 20:23:41 -05:00
Scott Lahteine	7501e40e0b	APB comment correction	2019-07-21 20:13:36 -05:00
InsanityAutomation	dc6fa04f68	Fix single nozzle temp change, do slower extra prime (#14696)	2019-07-21 19:33:37 -05:00
Tim Moore	e5aa453293	Add support for 2 Neopixel strips (#14667)	2019-07-20 23:14:09 -05:00
BigTreeTech	a38b9da672	STM32F1 SPI1 bugfix (#14679)	2019-07-20 20:35:41 -05:00
Scott Lahteine	93adb7e944	Some comment patches	2019-07-20 16:46:59 -05:00
InsanityAutomation	9cd66f6f77	Fix missing include & condition (#14682)	2019-07-20 01:55:34 -05:00
Tanguy Pruvot	977cfa4494	Fix a few recent (STM32F1 DOGM, SPI) warnings (#14669)	2019-07-20 01:54:01 -05:00
Ludy	39e1726498	Comments, includes (#14671)	2019-07-20 01:41:34 -05:00
Ludy	b714cfd4f0	MKS GEN v1.3/1.4 undef STAT_LED_*_PIN (#14644)	2019-07-19 06:12:57 -05:00
wookie666	00e2f6da8f	Improve magnetic dock switching toolhead (#14663)	2019-07-19 06:07:26 -05:00
Robby Candra	71d8c6f742	Fix LCD sanity check (#14678)	2019-07-19 05:53:36 -05:00
Scott Lahteine	fd2bc3a212	[cron] Bump distribution date	2019-07-19 00:00:09 -05:00
Scott Lahteine	4cc83b6330	Allow THERMAL_PROTECTION_GRACE_PERIOD override ... Co-Authored-By: MarcelMo <marcelmo@users.noreply.github.com>	2019-07-18 23:38:03 -05:00
Scott Lahteine	1ea9a36d11	FYSETC BLTouch config and more (#14668)	2019-07-18 05:54:50 -05:00
Scott Lahteine	92e513e76e	Trailing whitespace	2019-07-18 05:51:36 -05:00
Msq001	6920b7fe91	BigTreeTech SKR E3 DIP (#14638)	2019-07-18 05:43:49 -05:00
Karl Andersson	d472934a70	FYSETC Mini 12864 for HAL_STM32 (#14639)	2019-07-18 05:42:16 -05:00
Scott Lahteine	ec13aa0dc1	Misc. whitespace	2019-07-18 05:13:55 -05:00
Scott Lahteine	3d153486da	Fysetc rename Part 2	2019-07-18 04:36:08 -05:00
Scott Lahteine	68108789d0	Add'l toolchange syncs	2019-07-18 02:44:21 -05:00
Scott Lahteine	fac0e63058	Clean up tool-change syncs (#14666)	2019-07-18 02:17:46 -05:00
Scott Lahteine	42b5ccafc9	Toss obsolete DEBUG_LEVELING_FEATURE tests	2019-07-17 20:26:48 -05:00
Marcio Teixeira	ca4d6f4470	Fix compile error (bad return type) (#14660)	2019-07-17 19:49:26 -05:00
thisiskeithb	522df57a45	Tevo Michelangelo configuration (#14577)	2019-07-17 19:47:14 -05:00
Robby Candra	c9aa68ef7a	Encoder direction: Wrangle, Revert select screen change (#14628)	2019-07-17 19:41:15 -05:00
Marcio Teixeira	839255eed4	Fix for M504 changing filament runout value (#14661) ... Fixes #14476	2019-07-17 19:11:45 -05:00
Scott Lahteine	305f277843	Drop old includes in serial.h	2019-07-17 05:49:20 -05:00
Tanguy Pruvot	9dfa5ba3a5	XPT2046: Handle MKS touchscreen w/out PenIRQ pin (#14640)	2019-07-17 04:41:10 -05:00
Jason Smith	f2c5740d06	Add 'E' argument to G34 to allow stowing between probes (#14533) ... - Use the return value from probe_pt during `G34` Eliminate the assumption that probe_pt leaves current_position set to values relative to the probed points. This is not always true, depending on the raise_after argument. - Add '`E`' argument to `G34` command allowing stowing between each probe.	2019-07-17 04:23:19 -05:00
Robby Candra	2c5436e315	Fix HOST_PROMPT_SUPPORT include in ExtUI API (#14650)	2019-07-17 04:23:19 -05:00
InsanityAutomation	b8cc61262f	Finish G12, update Nozzle::clean (#14642)	2019-07-17 04:23:19 -05:00
Marcio Teixeira	57ed063ba1	Fix unused variable warnings (#14643)	2019-07-17 03:16:10 -05:00
Scott Lahteine	06324df072	Apply some #ifndef	2019-07-17 03:14:44 -05:00
Marcio Teixeira	27c487bab7	Print progress enhancements (#14647)	2019-07-17 03:14:44 -05:00
Robby Candra	ebb1a7dc1f	Fix EXT_UI example onFilamentChange Parameter (#14649)	2019-07-17 03:05:23 -05:00
Scott Lahteine	5ccf8c2c33	Fix serial.h indents	2019-07-17 02:03:25 -05:00
Scott Lahteine	ef2a2eb984	Temp tweak	2019-07-17 02:03:25 -05:00
Ludy	abc9b52692	Update copyright in header, etc. (#14645)	2019-07-16 22:42:36 -05:00
Scott Lahteine	5535a047d7	[cron] Bump distribution date	2019-07-16 00:00:08 -05:00
Tanguy Pruvot	bae8d0a4bd	DOGM: Avoid white flash on TFT (re)init (#14631) ... - Avoid white flash on TFT (re)init. Unlike Graphical LCD, the TFT init color may be full white if the backlight is on during init. - Add a conditional for delayed backlight init which can be applied to any backlit display.	2019-07-15 17:36:16 -05:00
Scott Lahteine	93bc1b17f9	[cron] Bump distribution date	2019-07-15 00:00:08 -05:00
Simon Jouet	f0de56a797	ESP32 HAL - Dynamic ADC attenuation (#14623)	2019-07-14 23:32:48 -05:00
Tanguy Pruvot	81d629bc47	Robin & Longer3D SPI TFT driver (#14595)	2019-07-14 18:16:26 -05:00
Tanguy Pruvot	45bde333d5	Initial Longer3D LK1/2 (Alfawise U20/U20+/U30) support (#14597)	2019-07-14 18:05:24 -05:00
Jeonghwan Noh	475ccfad62	Oscar (by Thinknthings of Korea) board support (#14574)	2019-07-14 15:36:03 -05:00
Scott Lahteine	fdaa374490	Clean up pins self-checks	2019-07-14 15:34:14 -05:00
Scott Lahteine	77b4f23edc	Update pins comments	2019-07-14 15:19:22 -05:00
Scott Lahteine	d4be970c8b	Update DOGLCD conditions	2019-07-14 13:10:13 -05:00
Scott Lahteine	2d84bcb4cd	Simplify, update LCD sanity-check	2019-07-14 13:09:16 -05:00
Scott Lahteine	eaf1c0954e	Update some precompiler tests	2019-07-14 13:09:16 -05:00
InsanityAutomation	ce02c6cee2	Variable tool change purge (#14618)	2019-07-14 11:40:58 -05:00
Marcio Teixeira	cbe4bf2ba8	Fix process_injected_command undefined behavior (#14602)	2019-07-14 10:12:48 -05:00
Ringel	e139c1d9d9	Fix ESP32 i2s stream, add PWM to extended pins (#14592)	2019-07-14 10:08:14 -05:00
Marcio Teixeira	a49478cefa	Fix STATUS_MESSAGE_SCROLLING in LIGHTWEIGHT_UI (#14603)	2019-07-14 09:39:03 -05:00
InsanityAutomation	d2f20803ba	Allow nozzle clean with limited Axis (#14619)	2019-07-14 06:58:53 -05:00
Ludy	6dcb85927a	Update German language, &c. (#14613)	2019-07-14 04:34:55 -05:00
Robby Candra	e96468566d	Fix Z_PROBE_END_SCRIPT in ABL (#14621)	2019-07-14 04:28:38 -05:00
Scott Lahteine	a85cd042d8	[cron] Bump distribution date	2019-07-14 00:00:09 -05:00
Scott Lahteine	91bb0f5439	[cron] Bump distribution date	2019-07-13 00:00:09 -05:00
Scott Lahteine	b2b7c583eb	Pins cleanup	2019-07-12 23:07:52 -05:00
Karl Andersson	82cafc9b19	pins_ARMED overrides STM32 defines (#14587)	2019-07-12 06:06:04 -05:00
Scott Lahteine	d3add3c34f	Init servo macro, j/b	2019-07-12 04:53:50 -05:00
InsanityAutomation	f1eaed7e98	Only init servo pins used for servos (#14589)	2019-07-12 04:30:15 -05:00
scotthsl	19b24a349c	Fix M412 without HOST_ACTION_COMMANDS (#14591)	2019-07-12 04:23:33 -05:00
Scott Lahteine	89964ec30d	[cron] Bump distribution date	2019-07-12 00:00:08 -05:00
Giuliano Zaro	cd36809c06	Fix STM32F7 compile error (#14583)	2019-07-11 15:23:53 -05:00
Scott Lahteine	3cd9a92dcc	Use REVERSE_ENCODER_DIRECTION in do_select_screen	2019-07-11 15:17:26 -05:00
Scott Lahteine	80c6f98d2f	Fix nested _draw_chamber_status ... Co-Authored-By: alexscarbro <alexscarbro@users.noreply.github.com>	2019-07-11 14:51:26 -05:00
Scott Lahteine	b0d8ba3894	Fix ANIM_CHAMBER ... Co-Authored-By: alexscarbro <alexscarbro@users.noreply.github.com>	2019-07-11 14:36:02 -05:00
Ludy	70586d3a6c	Update (c) comments (#14584)	2019-07-11 13:48:15 -05:00
Pavel4e5	8babf55b18	Init ADC keypad analog input (#14585)	2019-07-11 13:47:41 -05:00
Scott Lahteine	948c3f580b	Clean up some LCD conditions	2019-07-11 06:11:19 -05:00
Scott Lahteine	3218c4b33f	Shorten some config descriptions	2019-07-11 05:45:27 -05:00
Scott Lahteine	179095c387	Pins cleanup	2019-07-11 05:29:24 -05:00
thisiskeithb	42be684e69	Wanhao Duplicator i3 Mini support (#14559)	2019-07-11 04:36:51 -05:00
Scott Lahteine	340d827dc1	Fix mega/ subfolder pins ... Followup to #14573	2019-07-11 02:59:02 -05:00
Scott Lahteine	7de605c5c3	Move pins files to subfolders #14573	2019-07-11 02:32:24 -05:00
Scott Lahteine	e5a5273edb	[cron] Bump distribution date	2019-07-11 00:00:10 -05:00
Scott Lahteine	98c6c6f1aa	Combine STM32F4 and STM32F7 (#14566) ... * Serial assert (needs work) * Bring STM32F4/F7 together * Tweaks to STM32 headers * More general 'stm32_timer_t' * Move vsnprintf_P to Marduino.h	2019-07-10 22:05:34 -05:00
Giuliano Zaro	caa87d5fe1	SD2Card cleanup (#14571)	2019-07-10 22:04:16 -05:00
Scott Lahteine	ad1c061e7b	Bring STM32F4/F7 together	2019-07-10 07:07:04 -05:00
Scott Lahteine	4e479caf61	Fix mis-use of LIMIT	2019-07-10 07:07:04 -05:00
Scott Lahteine	cf9ac4c847	Move vsnprintf_P to Marduino.h	2019-07-10 07:07:04 -05:00
Scott Lahteine	f7de453da8	More general 'stm32_timer_t'	2019-07-10 07:07:04 -05:00
Scott Lahteine	828cc71847	Tweaks to STM32 headers	2019-07-10 07:07:04 -05:00
Scott Lahteine	94f2e82897	Serial assert (needs work)	2019-07-10 07:07:04 -05:00
Tanguy Pruvot	881e5a48bc	Fix M43 warning, XL density timers (#14555)	2019-07-10 06:30:57 -05:00
Scott Lahteine	44c8f29e47	More board name cleanup	2019-07-10 05:54:15 -05:00
Scott Lahteine	ed0e6afacb	Apply LIMIT macro	2019-07-10 03:35:39 -05:00
Scott Lahteine	9817976375	[cron] Bump distribution date	2019-07-10 00:00:08 -05:00
Ludy	a7bb1fc322	Fix Dual X,Y,Z UART pins in relation to TMC2208/9 (#14554)	2019-07-09 22:52:48 -05:00
Scott Lahteine	f990ebfb09	Tweak STM32F4/7 eeprom emulation (#14563)	2019-07-09 22:49:58 -05:00
Scott Lahteine	056efaba91	Clean up section comments	2019-07-09 22:34:21 -05:00
Scott Lahteine	5519054f50	Improve BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE (#13740)	2019-07-09 21:35:07 -05:00
Scott Lahteine	3ae3bf5d33	Get E2END from pins, fix Linux buffer	2019-07-09 21:32:13 -05:00
Scott Lahteine	01e8813286	EEPROM_EMULATED_WITH_SRAM => SRAM_EEPROM_EMULATION	2019-07-09 21:31:33 -05:00
Scott Lahteine	cb60001784	Clean up BOARD_NAME in pins	2019-07-09 21:31:06 -05:00
Scott Lahteine	c0e917ea83	DUE/usb should use platform min/max	2019-07-09 19:31:07 -05:00
gmarsh	ab99a80793	GMARSH X6 board support (#14550)	2019-07-09 00:30:08 -05:00
Scott Lahteine	84d0bc5c17	OLED LCD section	2019-07-08 23:58:04 -05:00
Scott Lahteine	a2ba0aaaac	HAL include and other adjustments (#14525)	2019-07-08 23:42:29 -05:00
Ludy	ba22857f93	Allow override of TMC_SW_* pins, etc.	2019-07-08 23:13:28 -05:00
Scott Lahteine	1a349c7522	Add HAS_TMC220x	2019-07-08 23:07:42 -05:00
Scott Lahteine	9821ec2afd	Fix SKR Pro pins, STM32F1/4 sanity-check ... Co-Authored-By: Msq001 <msq001@users.noreply.github.com>	2019-07-08 23:07:42 -05:00
Scott Lahteine	2b1c2a0db9	[cron] Bump distribution date	2019-07-08 00:00:11 -05:00
Tim Moore	8b81c0e88f	LEDs to default on print completion (#14535)	2019-07-07 07:17:08 -05:00
Scott Lahteine	e7307af42d	[cron] Bump distribution date	2019-07-07 00:09:53 -05:00
Msq001	439e28783b	BigTree SKR Pro V1.1 board support (#14523)	2019-07-06 21:52:17 -05:00
Ludy	3a75342508	Allow override of TMC_SW_* pins (#14528)	2019-07-06 21:25:48 -05:00
igorepi	c1bb3278d4	Fix Russian grammar (#14527)	2019-07-06 21:24:57 -05:00
Ludy	c0497234b9	SanityCheck Biqu SKR 1.1 => BigTree SKR 1.1 (#14526)	2019-07-06 21:24:10 -05:00
Roxy-3D	cdf4ed87a1	Add back required precision for off printer mesh saves	2019-07-06 21:01:56 -05:00
Scott Lahteine	8916acf083	[cron] Bump distribution date	2019-07-06 00:00:09 -05:00
Tanguy Pruvot	8873c583d3	Prevent extra settings.load on boot (#14499)	2019-07-05 22:25:59 -05:00
Bob Kuhn	dc02d0720d	Pins Debugging for STM32 — NEEDS TESTING (#14309)	2019-07-05 22:08:06 -05:00
Tanguy Pruvot	052aa23efe	STM32F1: ignore output check for analogWrite() (#14498)	2019-07-05 21:13:32 -05:00
Alexander Amelkin	7a42132002	GTM32 Pro pins updates (#14505)	2019-07-05 21:09:17 -05:00
thisiskeithb	10a71e332d	Biqu SKR 1.1 => BigTree SKR 1.1 (#14514)	2019-07-05 20:57:08 -05:00
Vanessa Dannenberg	4fa8053638	RPW-Ultra thermistor table (#14517)	2019-07-05 20:37:05 -05:00
Ludy	a210f80adc	Sanity-check for CASE_LIGHT_PIN (#14518)	2019-07-05 20:18:43 -05:00
Scott Lahteine	253d0f9671	Some MIN/MAX rely on core	2019-07-05 20:07:48 -05:00
Scott Lahteine	535b70057e	Oops. Don't undef MIN/MAX	2019-07-05 18:42:21 -05:00
Scott Lahteine	021c4ccf5f	Fix SpindleLaser class ... Fix #14465	2019-07-05 18:39:40 -05:00
Scott Lahteine	fe02241044	NONE on combined options	2019-07-05 18:20:24 -05:00
Scott Lahteine	67e0238c89	Reduce type warnings	2019-07-05 18:20:24 -05:00
Scott Lahteine	750a16ad38	Fix MIN/MAX function collision with macros	2019-07-05 18:14:02 -05:00
Scott Lahteine	b6546ea33a	Add include guards to some headers	2019-07-05 04:02:08 -05:00
Scott Lahteine	8ff49d6b46	[cron] Bump distribution date	2019-07-05 03:48:50 -05:00
Tanguy Pruvot	31450d9d6b	M43: spi channels are not pins (#14502)	2019-07-05 02:03:01 -05:00
Roman Moravčík	9736a21de2	Update Slovak language (#14503)	2019-07-05 02:02:20 -05:00
Giuliano Zaro	2bf11da5ab	Fix pin based on SOFT_SPI_CS (#14504)	2019-07-05 02:01:52 -05:00
Giuliano Zaro	66e16af29d	SPI defines cleanup (#14506)	2019-07-05 01:59:37 -05:00
Tim Moore	eb6dec03bd	Simplify power supply naming logic (#14488) ... Co-Authored-By: Tim Moore <tim.moore@lightbend.com> Co-Authored-By: AnHardt <github@kitelab.de>	2019-07-05 01:58:34 -05:00
Scott Lahteine	44e4f853c8	Patch M_PI in Marduino.h	2019-07-04 19:58:08 -05:00
Scott Lahteine	c6e6365e15	[cron] Bump distribution date	2019-07-04 15:56:02 -05:00
Roxy-3D	41b7f16ab8	Fix grammar of comment for G29 T command	2019-07-03 19:26:43 -05:00
Scott Lahteine	de462f2b8a	Revert "Sort out settings.load with SD EEPROM emulation (#14458)" ... This reverts commit 108d0df565.	2019-07-03 19:11:30 -05:00
Giuliano Zaro	b7573c6e69	Remove unused WRITE_VAR, etc. (#14493)	2019-07-03 17:52:30 -05:00
GMagician	8be146642f	Unused SPI PIN definitions	2019-07-03 17:49:55 -05:00
Scott Lahteine	6a2a10a154	Bump distribution date	2019-07-03 03:11:12 -05:00
Scott Lahteine	371969b531	Remove deprecated SCARA option	2019-07-03 02:43:33 -05:00
Scott Lahteine	ae9232962e	Use heater index defines	2019-07-02 23:29:43 -05:00
Scott Lahteine	f7eeae8424	Indent a line	2019-07-02 21:34:40 -05:00
teemuatlut	8aad29fb6e	Fix Prusa chopper timing preset	2019-07-02 20:51:33 -05:00
Scott Lahteine	1620738701	Home dir use < or >	2019-07-02 20:51:33 -05:00
Scott Lahteine	0f79fb9821	Generic stop pins (presume one endstop per axis end)	2019-07-02 20:30:26 -05:00
Scott Lahteine	ce2b4bc20c	Conditionals tweak	2019-07-02 20:30:26 -05:00
Ludy	3358caed14	Update German/Italian language (#14482)	2019-07-02 19:25:20 -05:00
Scott Lahteine	720bc7c00b	Named indices for Temperature class (#14479)	2019-07-02 08:39:55 -05:00
Scott Lahteine	274809aced	Bump distribution date	2019-07-02 05:54:06 -05:00
Scott Lahteine	ff55088491	Fix Malyan LCD warnings	2019-07-02 04:36:02 -05:00
Scott Lahteine	d4415dcf59	Fix analogWrite ambiguity	2019-07-02 04:36:02 -05:00
thisiskeithb	c6f74ba887	TH3D EZBoard v1.0 (#14473)	2019-07-02 03:12:32 -05:00
Marcio Teixeira	16409eb233	Suppress more UNUSED warnings (#14466)	2019-07-01 20:42:38 -05:00
GMagician	82ecaa767e	Remove unused code in M100 ... queue.buffer is in bss area, start_free_memory starts from heap then above of bss	2019-07-01 20:38:49 -05:00
GMagician	54358fbe28	Update Italian language	2019-07-01 20:37:59 -05:00
Scott Lahteine	c28e08c849	Fix mintemp/maxtemp monitoring for thermocouples	2019-07-01 10:24:53 -05:00
Scott Lahteine	de8fee6aea	Clarify ExtUI command injection	2019-07-01 09:23:00 -05:00
Scott Lahteine	448d482d3c	Update motherboard numbering (#14460)	2019-07-01 09:10:55 -05:00
Tanguy Pruvot	108d0df565	Sort out settings.load with SD EEPROM emulation (#14458)	2019-07-01 09:10:17 -05:00
Scott Lahteine	18e396b102	Update motherboard numbering	2019-07-01 07:06:38 -05:00
Msq001	c9be936d4a	BigTreeTech SKR Mini E3 (#14457)	2019-07-01 07:06:25 -05:00
Aliaksei Kvitsinski	2f932a11b3	Park heads with electromagnet (#14023)	2019-07-01 05:55:23 -05:00
Tanguy Pruvot	ca7f56e60b	Add 0.025mm Manual Move for Z (#14456)	2019-07-01 03:17:50 -05:00
Scott Lahteine	56c4a96180	Bump distribution date	2019-07-01 01:21:31 -05:00
thisiskeithb	4b9f6d531b	Add links to Junction Deviation heading (#14272)	2019-07-01 01:17:53 -05:00
Scott Lahteine	ced30b1054	Update ExtUI sanity checks	2019-07-01 00:50:22 -05:00
Scott Lahteine	10b85be405	status_message_level => alert_level	2019-07-01 00:47:08 -05:00
Tanguy Pruvot	24655a6bf3	Touch-MI Menu and Manual Deploy option (#14290)	2019-06-30 23:55:27 -05:00
Ludy	dab2f0c89c	Mask unused var, update (c) comments (#14455)	2019-06-30 22:29:33 -05:00
Ludy	0ca64a0ea3	Fix compile error with Z_PROBE_END_SCRIPT (#14447)	2019-06-29 23:20:49 -05:00
Scott Lahteine	d16954dc88	Make KEEPALIVE_STATE a scoped auto-restore (#14446)	2019-06-29 22:49:50 -05:00
Tanguy Pruvot	19aafb9050	Fix STM32F1 motor shocks (stepper timer issue) (#14030)	2019-06-29 04:39:38 -05:00
Scott Lahteine	3ea073ace6	Slight reduction in serial.h file size	2019-06-29 04:04:25 -05:00
thisiskeithb	6978bb5ea5	Fix MKS Robin Nano FAN_PIN (#14444)	2019-06-29 02:11:26 -05:00
th33xitus	fe2c710b39	Fix for Arduino Due + 12864 Full Graphic Display (#14181)	2019-06-29 01:37:02 -05:00
Phr3d13	34c8204d25	STM32F1 SD EEPROM Emulation Fixes (#14261)	2019-06-29 01:34:54 -05:00
Marcio Teixeira	e6cf7860e8	Improve ExtUI, fix compiler errors, warnings (#14441)	2019-06-29 00:23:57 -05:00
Scott Lahteine	e89a47c8b5	Bump distribution date	2019-06-29 00:13:59 -05:00
Scott Lahteine	b615b492ba	Update some HAL comments	2019-06-28 23:10:40 -05:00
Scott Lahteine	49027721e9	Clean up some pinsDebug headers	2019-06-28 22:50:56 -05:00
Scott Lahteine	c9a8db33c3	Fix scaledFanSpeed	2019-06-28 21:24:47 -05:00
Darsey Litzenberger	946f6bdeaa	Disable leveling during G12 (#14385)	2019-06-28 19:23:42 -05:00
Scott Lahteine	b3f42d2519	Update SD host config comment	2019-06-28 19:13:27 -05:00
Roman Moravčík	77c67085bf	Update Slovak language (#14433)	2019-06-28 18:57:43 -05:00
Giuliano Zaro	9174aa376f	Update Italian language (#14440)	2019-06-28 18:56:10 -05:00
Giuliano Zaro	07c998afe5	Fix E2END on RURAMPS (#14438)	2019-06-28 18:55:17 -05:00
Giuliano Zaro	a9445d557e	Remove extra #if (#14439)	2019-06-28 18:54:22 -05:00
Scott Lahteine	4d5a1984e2	Simplified fan handling code	2019-06-28 18:50:32 -05:00
Scott Lahteine	a8d68b7c8a	Common method for scaled fan speed	2019-06-28 15:34:17 -05:00
Scott Lahteine	1a09c4dea5	Cutter class followup	2019-06-28 15:34:17 -05:00
Scott Lahteine	9da02d2114	Help syntax highlighting (Sublime, et. al.)	2019-06-28 15:04:17 -05:00
Martin	ae9afb333e	Remove fwretract planner.synchronize calls (#14432)	2019-06-28 13:33:47 -05:00
Scott Lahteine	93cd66ac11	Tweaky change from (C) to (c)	2019-06-27 23:58:16 -05:00
Scott Lahteine	d7d80418ae	Singleton for cutting tools (#14429)	2019-06-27 23:06:49 -05:00
Scott Lahteine	2fde1475cb	Allow SD card sharing on SKR Mini	2019-06-27 22:30:13 -05:00
Scott Lahteine	7e16835c83	Use LCD conditionals in pins files (#14428)	2019-06-27 22:14:43 -05:00
thisiskeithb	8b63e3701f	MKS Robin Nano board support (#14363)	2019-06-27 21:33:41 -05:00
Tim Moore	81209f5310	'M105 R' to report redundant temp sensor (#14324)	2019-06-27 21:29:52 -05:00
Scott Lahteine	6664b90bbb	Init servo pins in HAL_init (#14425)	2019-06-27 16:29:17 -05:00
Tim Moore	8ce84fa44f	Add temperature-based auto power options (#14397)	2019-06-27 16:28:07 -05:00
Scott Lahteine	00cc1079af	Add missing chamber auto fan options	2019-06-27 16:05:47 -05:00
InsanityAutomation	ce656e2a26	Update G-code injection, sub-commands (#14418)	2019-06-27 15:07:45 -05:00
InsanityAutomation	b961251899	Add Z_PROBE_END_SCRIPT to UBL (#14419)	2019-06-27 13:00:55 -05:00
Scott Lahteine	2580104c8b	Revert recent probe changes ... - Revert "Fix FIX_MOUNTED_PROBE compile error (#14393)" - Revert "Fix G28 with non-BLTouch probes (#14381)" - Revert "Fix BLTOUCH deploy/stow in HS mode (#14352)" - Revert "Apply needed BLTouch patch (#14233)" Co-Authored-By: AnHardt <github@kitelab.de>	2019-06-26 05:33:43 -05:00
thisiskeithb	cd302f9464	Add MKS SGen-L Board (#14411)	2019-06-26 04:17:06 -05:00
Andy Shaw	064177154c	Update SD card connection / sharing options (#14325)	2019-06-26 03:55:57 -05:00
BigIronGuru	9f136a7c67	Low-priority homing in G34 (#14391)	2019-06-26 03:52:01 -05:00
Scott Lahteine	49627069a5	Shorthand for home-after-deactivate	2019-06-26 03:47:55 -05:00
J.C. Nelson	30a3db4f22	Fix Malyan M200 config and protocol (#14394)	2019-06-26 03:35:52 -05:00
oechslein	8c55bd5451	Update "StallGuard threshold" heading (#14395)	2019-06-26 03:33:07 -05:00
Scott Lahteine	98f3a3d5c3	Bump distribution date	2019-06-26 03:15:31 -05:00
Msq001	e3846ec7a1	SKR mini can use 128x64 LCD (#14388)	2019-06-26 01:12:41 -05:00
Eric Ptak	8934b32f1b	Fysetc AIO II / Cheetah STM32F1 (#14407)	2019-06-26 00:40:29 -05:00
Marcio Teixeira	8e23e9b16c	Fix FIX_MOUNTED_PROBE compile error (#14393)	2019-06-25 04:55:29 -05:00
Tanguy Pruvot	07dac315a9	Up-to-date STM32F1 README (#14386)	2019-06-24 03:44:26 -05:00
thisiskeithb	a4aa3621c0	MKS Robin Mini Board Support (#14366)	2019-06-24 03:42:22 -05:00
Scott Lahteine	cf762d2c73	Fix enqueueing bug	2019-06-23 23:02:07 -05:00
BigIronGuru	12d21e642f	Update G34 for non-BLTouch probes (#14380)	2019-06-23 20:55:43 -05:00
BigIronGuru	5986194c36	Fix G28 with non-BLTouch probes (#14381)	2019-06-23 20:53:05 -05:00
InsanityAutomation	aa0383a83b	Enhance IDEX toolchange auto-return w/ no park, full control (#14117)	2019-06-23 20:00:48 -05:00
Scott Lahteine	3d9d72e8db	Include order, spacing, etc.	2019-06-23 04:02:52 -05:00
mikeshub	1b1a4677f5	Fix LCD.h compilation error (#14377)	2019-06-22 21:08:30 -05:00
sjasonsmith	07b41a8c3f	Include SOLENOID_PROBE in leveling report (#14344)	2019-06-22 17:54:37 -05:00
thisiskeithb	71b2700c3c	Anycubic Trigorilla 1.4 Rev. 1.1 (#14357)	2019-06-22 17:53:45 -05:00
BigIronGuru	f5afaaef5b	Fix probe.cpp warning (#14367)	2019-06-22 17:27:33 -05:00
BigIronGuru	def4bb987d	Reset, stow BLTouch before mode change (#14368)	2019-06-22 17:26:02 -05:00
Scott Lahteine	78557076ff	Add planner.synchronize to UBL G29	2019-06-22 17:23:29 -05:00
BigIronGuru	6578aa4e1b	Apply minimum timing to BLTouch commands (#14369)	2019-06-22 17:20:19 -05:00
teemuatlut	2247bf1ba5	Add missing dedge init for TMC2209 (#14370)	2019-06-22 17:00:15 -05:00
mikeshub	1db7013e3b	Fix and improve PID loops (#14373) ... - Windup guarding was missing. The kludge in place of windup guard is removed. D term filter calculations are simplified to require fewer `float` calculations. Sign change for D term output to make debugging output clearer. - Use "no overshoot" for bed PID tuning.	2019-06-22 16:52:56 -05:00
Scott Lahteine	17778d1c2a	Fix M916-918 subcommands	2019-06-22 16:18:42 -05:00
Tanguy Pruvot	be69ec5b32	Fix PLR/M43 warnings (#14333)	2019-06-22 00:48:47 -05:00
BigIronGuru	9c83135d40	Only home Z at the end of G34 (#14353)	2019-06-22 00:43:33 -05:00
InsanityAutomation	5df051fdee	Fix Start SD Print bug (#14354) ... Followup to the G-code parser injection update.	2019-06-22 00:37:21 -05:00
LinFor	0f6f5132c1	Fix variable conflict in ok_to_send (#14351)	2019-06-21 19:04:30 -05:00
MrMabulous	c41b005f33	Add Extra Probing option, discarding outliers (#14338)	2019-06-21 19:02:26 -05:00
BigIronGuru	8f99d45045	Fix BLTOUCH deploy/stow in HS mode (#14352)	2019-06-21 18:55:27 -05:00
Tobias Frost	eeaef2410a	Support DGUS Display with DWIN OS (#13253)	2019-06-21 04:47:23 -05:00
Scott Lahteine	bb0bcbaec0	Suppress compiler warning	2019-06-21 02:20:40 -05:00
Tanguy Pruvot	52383633e7	STM32F1: M43 PINS_DEBUGGING (#14072)	2019-06-21 01:20:17 -05:00
Karl Andersson	81d550754a	Fix "UNUSED" redefined warning on HAL_STM32 (#14342)	2019-06-21 00:48:10 -05:00
Karl Andersson	4b365552db	Fix Marduino SBI/CBI redefine (#14341)	2019-06-21 00:46:23 -05:00
InsanityAutomation	a9acd2f497	G34 configurable angle limit (#14321)	2019-06-20 21:18:36 -05:00
Scott Lahteine	a31cb910f5	Tweak some config spacing	2019-06-20 21:08:47 -05:00
Marcio Teixeira	49ea1c635a	Fix missing dependencies (#14339)	2019-06-20 16:37:20 -05:00
Scott Lahteine	4df4c47994	Add TMC2209 support (#14249)	2019-06-20 15:47:50 -05:00
Tanguy Pruvot	ed0c70f0a0	SKRmini followup - Fysetc config updates (#14327)	2019-06-20 05:49:27 -05:00
Scott Lahteine	dd06017f64	Bring configs up to date	2019-06-19 01:03:51 -05:00
Scott Lahteine	9131b11944	Games in Info menu, if enabled	2019-06-19 00:03:32 -05:00
Scott Lahteine	4c872a01f2	G-code queue singleton, front injection (#14236)	2019-06-19 00:00:19 -05:00
Tanguy Pruvot	75aeb41ab7	SKRmini support for Fysetc Mini Panel (#14319)	2019-06-18 19:34:16 -05:00
InsanityAutomation	bf64dd4db6	Improve G34, M422 (Z alignment) (#14142)	2019-06-18 07:02:18 -05:00
Tanguy Pruvot	391250b04f	STM32F1: Don't toggle EEPROM SPI SS (#14299)	2019-06-18 06:48:20 -05:00
Giuliano Zaro	27d30c1be8	Update Italian language (#14302)	2019-06-18 06:45:34 -05:00
Scott Lahteine	3f6424076b	Update M524 description	2019-06-18 05:04:55 -05:00
Scott Lahteine	cf3631226b	Document G-code M290	2019-06-18 04:53:31 -05:00
Scott Lahteine	c12b6ba760	Add Dagoma F5 to Makefile	2019-06-18 04:40:00 -05:00
3DSmitty	5b13abcacb	Fix SPI_SD Outside of HAL_STM32F1 (#14306)	2019-06-18 02:38:18 -05:00
Bob Kuhn	089d12df16	Fix duplicate board IDs (#14310)	2019-06-18 02:26:13 -05:00
Ludy	2290b269dc	Unused variable (#14301)	2019-06-18 00:15:41 -05:00
Scott Lahteine	6b2d42434c	Wrap main menu external declarations	2019-06-17 21:44:56 -05:00
Scott Lahteine	aacb904e1f	Adjust some config comments	2019-06-17 20:22:07 -05:00
Scott Lahteine	651f3eeed0	Clean up trailing whitespace	2019-06-17 20:22:07 -05:00
Ludy	35aabd1834	Fix Spindle/Laser compile error (#14312)	2019-06-17 18:38:43 -05:00
Scott Lahteine	21f377d94a	STM32F1: various small changes (#14313) ... - init the led pin as output (like other HALs) - reduce sdio dma priority to normal.. highest is never the best... - allow fsmc only on compatible STM32F1 (like HAL fsmc) - fsmc: remove an useless C style cast	2019-06-17 17:48:50 -05:00
sensei73	ce5f94c8f4	Fix Touch-MI sanity checks (#14316)	2019-06-17 17:46:14 -05:00
Tanguy Pruvot	287df7a61f	STM32F1: various small changes ... - init the led pin as output (like other HALs) - reduce sdio dma priority to normal.. highest is never the best... - allow fsmc only on compatible STM32F1 (like HAL fsmc) - fsmc: remove an useless C style cast	2019-06-17 10:27:30 +02:00
3DSmitty	66d51272af	Fix SPI, SD for BIGTREETECH SKR Mini (#14287)	2019-06-15 18:12:05 -05:00
Scott Lahteine	903863dcb6	Suppress some warnings	2019-06-15 17:47:59 -05:00
Scott Lahteine	eb1c9113c2	Try to init SD with no detect pin	2019-06-15 15:36:48 -05:00
Scott Lahteine	9a56a88200	Use OUT_WRITE in SPI pin init	2019-06-15 15:36:43 -05:00
Scott Lahteine	24c23b60fa	Use lambda, fix wrap pointer	2019-06-15 15:36:42 -05:00
pinchies	3021097888	Add JGAurora A5S and A1 (STM32F103ZET6) (#14291) ... - Now compiles and works correctly with changes to HAL timers and watchdog. - Does NOT include awesome work on touch screen function. - Does have working LCD and SD-based EEPROM.	2019-06-15 14:28:22 -05:00
Ludy	6fb3db1633	Update German language (#14294)	2019-06-15 14:26:14 -05:00
Scott Lahteine	a17f057daa	Fix word wrapping on select screens	2019-06-15 14:06:23 -05:00
Tanguy Pruvot	f2cfa408b7	Touch-MI probe by hotends.fr (#14101) ... A simple Z probe using a magnet to deploy a probe. See https://youtu.be/E7Ik9PbKPl0 for the sensor description...	2019-06-14 22:19:48 -05:00
Scott Lahteine	26de051e92	HAL SPI pin init cleanup	2019-06-14 20:17:25 -05:00
Scott Lahteine	50c9b33ed7	!ENABLED => DISABLED	2019-06-14 00:44:49 -05:00
teemuatlut	29afd11cbf	Updates for TMC2660 init (#14245)	2019-06-13 23:16:10 -05:00
Scott Lahteine	dfdbd1e75f	Use TEST macro where possible	2019-06-13 20:59:12 -05:00
teemuatlut	12a270fd29	Fix TMC5160 and TMC2160 PWMCONF init	2019-06-13 20:57:12 -05:00
Scott Lahteine	fc73a8b004	Add AXIS_HAS_SQUARE_WAVE shorthand	2019-06-13 20:57:12 -05:00
mb300sd	bf8bfb5c66	Add Coolant Control M7/M8/M9 (#10745)	2019-06-13 18:43:11 -05:00
Aliaksei Kvitsinski	648a91bce8	Support for Z-Bold board (#14024)	2019-06-13 03:21:18 -05:00
MastS	18904c42f6	Fysetc LCD backlight timeout (#14265)	2019-06-12 21:59:39 -05:00
Scott Lahteine	bc2ff9b41f	Fix M605 bugs ... Fixes #14191	2019-06-12 20:01:08 -05:00
Scott Lahteine	f7792c0192	Group manual move options	2019-06-12 19:49:18 -05:00
Tanguy Pruvot	7d1eafc80a	STM32F1: C++14 for static_assert, etc. (#14278)	2019-06-12 18:44:32 -05:00
Msq001	26e7e33698	Fix bug in STM32F1 WRITE macro (#14275)	2019-06-12 06:30:24 -05:00
Scott Lahteine	04715e04ee	Minor M100 cleanup	2019-06-12 06:14:40 -05:00
Scott Lahteine	356410dcfc	Move crc16 function to libs	2019-06-12 06:14:39 -05:00
Scott Lahteine	2a96d4e23a	Move number-to-string functions to libs	2019-06-11 07:51:47 -05:00
Scott Lahteine	1ef95013f0	Update Marlin.cpp includes, defines	2019-06-11 07:30:51 -05:00
Kaushik Vemparala	c88d9ae282	Option to leave heaters set on SD abort (#14251)	2019-06-10 23:57:55 -05:00
Tanguy Pruvot	8cf5504a34	Redundant but faster recovery.enabled test (#14175)	2019-06-10 23:33:35 -05:00
Tanguy Pruvot	c3e5225531	Add SPI EEPROM to STM32F1 (#14239)	2019-06-10 23:30:23 -05:00
felixstorm	9439fab7fd	Fix ESP32 servos, platformio.ini, etc. (#14247)	2019-06-10 23:22:19 -05:00
yangwenxiong	b0a4ea79b8	BigTreeTech SKR Mini v1.1 (#14041)	2019-06-10 21:10:51 -05:00
Robby Candra	f30b89953d	runout.distance_mm LCD edit item (#14066)	2019-06-10 20:18:06 -05:00
mikeshub	a3f034b95e	FFCP updates. Update XY soft endstops on tool_change (#14125)	2019-06-10 18:01:42 -05:00
InsanityAutomation	b7eeb5b13b	Move BLTouch options to adv config (#14131) ... Plus other BLTouch and menu enhancements.	2019-06-10 17:46:42 -05:00
Scott Lahteine	0ca2073625	ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED => SD_ABORT_ON_ENDSTOP_HIT	2019-06-10 17:28:35 -05:00
thisiskeithb	662e7da8a4	Fix USE_BIG_EDIT_FONT bug (#14252)	2019-06-09 19:37:14 -05:00
teemuatlut	cccc51ee0e	TMC Square Wave Stepping mode (#14195)	2019-06-09 05:08:05 -05:00
Scott Lahteine	80ce0d2bdb	Whitespace cleanup	2019-06-08 06:40:44 -05:00
Scott Lahteine	455f0de817	Undefine sanity check tests when done	2019-06-08 06:29:28 -05:00
Robby Candra	7e07a3888b	Fix PLR Z bug affecting Cartesians (#14230)	2019-06-08 05:27:58 -05:00
Robby Candra	5ca8d51e12	Ability to insert G-code in front of queue (#14229)	2019-06-08 05:23:53 -05:00
BigIronGuru	293018f76c	Apply needed BLTouch patch (#14233)	2019-06-07 21:43:20 -05:00
Scott Lahteine	ffb76b75d7	fix TMC2208 boot loop with SW UART (#14135) ... Need stepper .begin() before calling susbequent .push()	2019-06-07 07:27:10 -05:00
InsanityAutomation	4138b1f9ae	Option to disable Case Light brightness control (#14165)	2019-06-07 07:23:42 -05:00
Tanguy Pruvot	764f0d9c1c	STM32F1: Servo "soft" PWM via timer interrupt (#14187)	2019-06-07 07:11:48 -05:00
InsanityAutomation	66e22d9f5a	ExtUI Heated Chamber support (#14198)	2019-06-07 07:08:41 -05:00
Scott Lahteine	9206c0e869	Use limit switch overrides	2019-06-05 22:27:06 -05:00
Scott Lahteine	34d2801bbe	Rename pins file (2)	2019-06-05 21:41:58 -05:00
Scott Lahteine	fa3b5fb059	Uppercase pins filename	2019-06-05 21:41:58 -05:00
Scott Lahteine	858b2fa21a	Fix thermistor table	2019-06-05 21:39:39 -05:00
InsanityAutomation	f6ec00d776	Update thermistor and working config	2019-06-04 20:25:00 -04:00
InsanityAutomation	bbcb61e042	Initial Commit - Add board	2019-06-03 23:49:19 -04:00
Tanguy Pruvot	e4260a41cb	Fix a DEBUG_LEVELING_FEATURE string copy (#14200)	2019-05-31 18:52:11 -05:00
Ryan	9d9030a39c	Fix Archim1 SD card (#14184)	2019-05-30 19:58:38 -05:00
InsanityAutomation	123e58d9c3	Heated Chamber for Graphical LCD (#14190)	2019-05-30 18:31:50 -05:00
Scott Lahteine	93ab16c6e4	Remove old mixing ISR comment	2019-05-30 17:05:16 -05:00
Scott Lahteine	6572848d7f	Fix stepper timing bug	2019-05-30 16:58:53 -05:00
Bob Kuhn	688b54d66a	DUE USB composite device field corrections (#14185)	2019-05-30 16:26:48 -05:00
InsanityAutomation	f889cc6ea6	ExtUI parity with SPI LCDs (#14172)	2019-05-30 16:24:13 -05:00
Scott Lahteine	07021c85c8	Tweak timer16_Sequence_t	2019-05-30 16:09:37 -05:00
Roman Moravčík	d70929f7c0	Update Slovak language (#14179)	2019-05-30 15:57:14 -05:00
Tanguy Pruvot	e3a468f2cd	STM32F1: FSMC only on chips with 100/144 pins (#14180)	2019-05-30 15:51:02 -05:00
Ludy	8e8e48f900	Fix links in templates, gcode.h (#14160)	2019-05-28 21:39:55 -05:00
InsanityAutomation	34ae76025e	Clear Pausing message after M600 park (#14171)	2019-05-28 21:36:14 -05:00
Ludy	bd494a6bd6	Update defines for patched temperature macros (#14161)	2019-05-28 17:43:31 -05:00
doggyfan	e09d8811c1	Apply grace period to thermistor failure testing (#14167)	2019-05-28 15:36:03 -05:00
InsanityAutomation	0f04ba016f	Adjust tool offset menus (#14153)	2019-05-27 21:29:08 -05:00
teemuatlut	bf4a0db97f	TMC LCD followup (#14134)	2019-05-27 21:24:20 -05:00
Minims	32afe1d102	Fix TOOLCHANGE_ZRAISE warning (#14156)	2019-05-27 19:51:29 -05:00
Robby Candra	5515f88452	Clarify SD longname string size (#14148)	2019-05-27 19:50:48 -05:00
Tanguy Pruvot	5f42d3a8b4	BLTouch French updates (#14137)	2019-05-27 01:02:35 -05:00
Scott Lahteine	d3bb5b69ba	Apply NOLESS/NOMORE	2019-05-26 20:55:00 -05:00
Scott Lahteine	b315157053	Apply const to mcp4728	2019-05-26 20:54:24 -05:00
Scott Lahteine	3c179bbd47	Simpler G28 home axis conditions	2019-05-26 16:26:55 -05:00
Scott Lahteine	352734494b	Reduce some M43 strings	2019-05-26 16:21:28 -05:00
Scott Lahteine	b14cc0d7c5	Remove extra gcode. prefix	2019-05-26 16:18:45 -05:00
Scott Lahteine	c6d39319de	Fix some whitespace	2019-05-26 16:18:43 -05:00
InsanityAutomation	212860f090	Always change to Tool 0 on G29 (#14146)	2019-05-26 14:53:21 -05:00
Giuliano Zaro	7b838f31be	DUE HAL cleanup (#14126)	2019-05-26 14:51:32 -05:00
Chris	36a0376c36	fix TMC2208 boot loop with SW UART ... Need stepper .begin() before calling susbequent .push()	2019-05-26 13:07:12 +02:00
Robby Candra	df7733425c	Shorten pause message for 4 line LCD (#14097)	2019-05-26 02:33:52 -05:00
Scott Lahteine	605ec0a478	Fix thermistor table warning	2019-05-26 01:30:20 -05:00
doggyfan	90121047d9	Fix thermal protection with user thermistor (#14130)	2019-05-25 23:37:08 -05:00
Scott Lahteine	81cee05476	Update some env in pins.h	2019-05-25 23:17:50 -05:00
Scott Lahteine	47fd74a98d	Clean up fast_pwm.cpp	2019-05-25 23:05:01 -05:00
Scott Lahteine	49229d97db	Consistent _useTimerX tests	2019-05-25 23:05:01 -05:00
Scott Lahteine	8924389dfc	Tweak servo µs macros	2019-05-25 22:33:51 -05:00
InsanityAutomation	49e83dd7c8	BLTouch V3.1 changes (#14104)	2019-05-25 21:56:47 -05:00
Scott Lahteine	14fe41f6b2	Update Z probe offset comment	2019-05-25 19:41:15 -05:00
Scott Lahteine	f8bede6b5e	Fix some HAL includes	2019-05-25 19:20:17 -05:00
Bryan	0ef5d667b6	Fixed M43 parameter bug (#14099)	2019-05-25 18:23:25 -05:00
teemuatlut	1c86fbc60b	TMC updates, capture LCD changes (#14074)	2019-05-25 18:22:12 -05:00
felixstorm	74f44783ac	ESP32 servo support (#14109)	2019-05-25 18:12:24 -05:00
felixstorm	bc5a1fe562	Various fixes for ESP32 (#14102)	2019-05-25 17:06:00 -05:00
Giuliano Zaro	e1bf34bdc9	Ruramps4d typo fix (#14096)	2019-05-25 16:41:08 -05:00
Scott Lahteine	7cce6b8d68	Bring configs up to date (MANUAL_FEEDRATE)	2019-05-25 16:31:13 -05:00
Scott Lahteine	44caf70917	Improve editing, fix some small value editing	2019-05-25 15:29:00 -05:00
Scott Lahteine	612eaa87bd	Fix "back" items in some sub-menus	2019-05-25 15:28:52 -05:00
Scott Lahteine	c5dc2e5a71	Update advanced BLTouch menu items	2019-05-25 15:26:25 -05:00
Scott Lahteine	48d1bd29cb	Shift m before compare to 0	2019-05-25 15:22:15 -05:00
InsanityAutomation	9f69fbe5ee	Move some menu items (#14118)	2019-05-25 15:16:00 -05:00
Scott Lahteine	fc52c43a26	Some documentation updates	2019-05-24 16:30:44 -05:00
Tanguy Pruvot	24b1818245	Secure STM32F1 servo code and M280 detach (#14085)	2019-05-22 16:57:19 -05:00
Scott Lahteine	a49919396a	LPC1768 MarlinServo => libServo	2019-05-22 16:54:52 -05:00
Scott Lahteine	2b5046659a	Tweak Marlin headers, comments	2019-05-22 16:54:52 -05:00
Scott Lahteine	cc862a8213	Replace some functions with lambdas	2019-05-22 16:54:35 -05:00
Ludy	fafd73a3af	Update copyright in headers (#14092)	2019-05-22 16:24:13 -05:00
Giuliano Zaro	2298923a9b	Update Italian language (#14095)	2019-05-22 16:23:41 -05:00
Ludy	41f61a12b8	Update German language (#14093)	2019-05-22 16:23:16 -05:00
doggyfan	594f6b14be	Limit user thermistor to 999, fix thermistor table macro (#14080)	2019-05-21 21:31:05 -05:00
Giuliano Zaro	a74aad3b4a	Clean up HALs / FastIO (#14082)	2019-05-21 18:28:12 -05:00
Scott Lahteine	4ef364a073	Sanity check probe offsets must be integers	2019-05-21 17:16:21 -05:00
Scott Lahteine	cfca07852a	Backlash linker error workaround ... Fix #14045	2019-05-20 21:52:56 -05:00
Scott Lahteine	aeec9ef76b	Update backlash code	2019-05-20 21:34:08 -05:00
Scott Lahteine	7b4c3bd92a	Fix call to synchronize in lcd_pause_job	2019-05-19 15:51:45 -05:00
Scott Lahteine	9bf65eacaa	Remove old adv config heading	2019-05-19 15:24:01 -05:00
Pavel4e5	3cd19a8ec0	Improve Zonestar keypad responsiveness (#14056)	2019-05-18 20:52:55 -05:00
Tanguy Pruvot	402f1f7307	STM32F1: STM32_HIGH_DENSITY is auto defined in HAL (#14057) ... - Fix the `fsmc` and `sdio` units which required hard defines for use.	2019-05-18 20:45:22 -05:00
Tanguy Pruvot	87e7193259	Fix M226 sign warning (for most platforms) (#14049)	2019-05-18 16:15:48 -05:00
Tanguy Pruvot	256f810df2	Add open-drain output mode to STM32F1 FastIO (#14050) ... - This mode is often used/preferred to drive printer boards' MOSFETs. - Can generally boost the allowed output power (for hotbed,nozzle and fans).	2019-05-18 16:12:00 -05:00
Bob Kuhn	1dad6e754b	Neopixel background LED option (#14025)	2019-05-18 02:36:37 -05:00
InsanityAutomation	84ac5b360b	Fix ExtUI mesh functions (#14027)	2019-05-17 20:37:23 -05:00
Scott Lahteine	9b5f9dda0e	Update analog pins labels	2019-05-17 20:22:25 -05:00
FanDjango	85fb33a060	BLTOUCH tweaks, new v3.1 command (#14015)	2019-05-17 19:10:18 -05:00
GUEST.it	62ef54cb81	UBL: Log and display G29 progress (#14036)	2019-05-17 19:02:21 -05:00
GUEST.it	7907eec04c	Fix power loss recovery with SINGLENOZZLE (#14033)	2019-05-17 18:47:15 -05:00
Scott Lahteine	efe651e749	Add THERMISTOR_NAME for 1000	2019-05-17 18:26:53 -05:00
Scott Lahteine	0b056970c6	Fix file.open in STM32 eeprom emu	2019-05-17 18:26:53 -05:00
InsanityAutomation	06f3273531	Fix DELTA pulse wait bug (#14028)	2019-05-17 16:16:56 -05:00
Marcio Teixeira	7ccbcf2eaa	Fix TMC EEPROM regression (#14008) ... Partially undo 15357af to ensure TMC code is initialized in the proper order.	2019-05-16 20:38:03 -05:00
Marcio Teixeira	9558962d59	Fix DUE HAL SW SPI compile error (#14005)	2019-05-16 20:36:19 -05:00
InsanityAutomation	07afe69cee	Fix some bad AZTEEG_X5_MINI pins (#14011)	2019-05-16 20:33:00 -05:00
Chris Pepper	451ea996c9	[LPC176x] Fix switch fallthrough	2019-05-15 10:35:26 +01:00
Tanguy Pruvot	d7b0369e39	STM32: Fix SD EEPROM emulation conflict (#14012)	2019-05-15 02:42:10 -05:00
Scott Lahteine	785c01f2bc	Use US spelling of 'behavior'	2019-05-15 01:49:17 -05:00
Sam Lane	7f1e0c5670	Update EXTRA_LINADV_K with Marlin bit macros (#13993)	2019-05-15 01:07:07 -05:00
Bob Kuhn	48bd8899bd	Cohesion 3D Remix: Onboard SD card, Fysetc LCD (#13991)	2019-05-15 00:59:57 -05:00
FanDjango	dcaefc68a5	BLTouch.init should not deploy (#13988) ... Low or unknown probe clearance on init (even at powerup) is a risk and therefore, a deploy should be avoided because dragging the pin is possible: A deploy goes into alarm if it can't extend fully and then the subsequent stow will fail.	2019-05-14 23:55:11 -05:00
Tanguy Pruvot	8075893352	STM32: fix sdcard filename conversion	2019-05-12 04:26:21 +02:00
chai-md	940ff8e7c8	Improve LV8729 stepping (#13776)	2019-05-11 19:02:19 -05:00
InsanityAutomation	991ee7552b	Restore menu edit to 32bit value (#13976)	2019-05-11 18:44:35 -05:00
Tanguy Pruvot	93dd097b1c	Use E2END, if defined, for STM32F1 (SD) (#13981)	2019-05-11 18:22:31 -05:00
InsanityAutomation	5108e4b6aa	Cleaner EEPROM auto init (#13975)	2019-05-11 16:54:03 -05:00
Bob Kuhn	456a0ee76b	Improve Due SW SPI, Fysetc sanity checks, &c. (#13939)	2019-05-11 16:51:39 -05:00
Robby Candra	7b78a20fb7	Fix: Debug Memory Dump size (#13957) ... * Fix Memory Dump size * Fix Compile error on Memory Dump	2019-05-11 11:44:39 -05:00
Scott Lahteine	a613bcad2d	Fix some spelling	2019-05-10 20:39:19 -05:00
Tanguy Pruvot	62b36d1b98	Fix STM32 timer warnings (#13946)	2019-05-10 20:00:21 -05:00
Giuliano Zaro	f22c9a1ae1	Fix G-code parser with MMU2 (#13951)	2019-05-10 19:57:15 -05:00
Marcio Teixeira	746c38f4be	Fix HAL_DUE multiple define error with graphical LCD (#13971)	2019-05-10 19:52:43 -05:00
Bob Kuhn	75eca5c4f8	Fysetc pins updates for RAMPS and SKR 1.3 (#13963)	2019-05-10 19:29:28 -05:00
Marcio Teixeira	227f29090d	Add heater timeouts to ExtUI (#13970) ... - Add local UI methods to get heater timeout state. - Add methods to resume timed-out heaters. - Re-enable heaters on UI temperature request. - Make `ExtUI` show a dialog box if pause needs a button press after reheat.	2019-05-10 15:56:13 -05:00
Bob Kuhn	fa3739aa23	M100: LPC1768 and DUE compatibility (#13962)	2019-05-09 21:57:44 -05:00
InsanityAutomation	3f758d9e00	Fix some edit items for 16-bit encoder (#13948)	2019-05-09 18:28:47 -05:00
ManuelMcLure	51acbb2201	Prevent HOST_PROMPT_SUPPORT compile error (#13943)	2019-05-09 11:48:31 -05:00
Scott Lahteine	ad4ffa1d2f	Use C++ language supported 'nullptr' (#13944)	2019-05-09 11:45:55 -05:00
Tanguy Pruvot	e53d7e5517	STM32: ADC warning fix (#13933)	2019-05-09 00:33:38 -05:00
Scott Lahteine	23ec650410	Consolidate Malyan LCD and ExtUI	2019-05-07 21:31:30 -05:00
InsanityAutomation	6811e2921b	BLTouch v3 / 3DTouch Interoperability & performance (#13814)	2019-05-07 21:25:54 -05:00
Giuliano Zaro	40aff7e1f2	Remove extra MMU (non-12V) code (#13938) ... `check_version` in state -5 should not be needed since it has already been called in state -4 and the tested build nr is only updated in state -4.	2019-05-07 21:02:08 -05:00
Tanguy Pruvot	11adcf1ce3	Add'l PLR options, AVR strstr_P compat (#13880)	2019-05-07 20:38:40 -05:00
InsanityAutomation	5dcb25664f	Option to Auto-Initialize EEPROM (#13935)	2019-05-07 16:30:31 -05:00
Ludy	a504366138	Fix probe fan compiling error (#13930)	2019-05-07 14:14:12 -05:00
Tanguy Pruvot	24e956d168	Avoid int8_t underflow on filament runout (#13895)	2019-05-07 13:58:10 -05:00
Stephan	483822f3aa	Fix some THERMAL_PROTECTION_CHAMBER issues (#13678)	2019-05-06 19:55:01 -05:00
doggyfan	23a8707ef1	Configurable Thermistor (#13888)	2019-05-06 18:51:06 -05:00
J.C. Nelson	172abc305b	Malyan M200 core fixes (#13927)	2019-05-06 18:07:13 -05:00
Scott Lahteine	a36782ac1d	Define more u8g command macros	2019-05-06 17:26:34 -05:00
Scott Lahteine	f9a50f451d	Serial out cleanup	2019-05-06 17:26:34 -05:00
Scott Lahteine	9853331b34	Fix temp init, loosen ADC grace period	2019-05-05 22:55:03 -05:00
Tanguy Pruvot	a4c24511f7	STM32: Fix Marduino SBI/CBI redefine (#13912)	2019-05-05 22:06:30 -05:00
Ludy	c837e9250c	Define tmc variables where needed (#13918)	2019-05-05 22:04:47 -05:00
Ludy	f96eaad1ea	Unused variable cleanup (#13917)	2019-05-05 22:01:04 -05:00
Ludy	421d526ba7	Update German language (#13915)	2019-05-05 22:00:19 -05:00
Giuliano Zaro	b07360f32a	Update Italian language (#13916)	2019-05-05 21:59:34 -05:00
Robby Candra	79955f0c89	Fix PLR file delete bug (#13860)	2019-05-04 23:30:47 -05:00
ManuelMcLure	09f1b58146	Fix HOST_PROMPT_SUPPORT compile issue (#13847)	2019-05-04 22:55:51 -05:00
Giuliano Zaro	e2a77ed881	Bring chamber temp to completion (#13837)	2019-05-04 22:51:47 -05:00
Robert Mendon	24177954dd	Add missing AZSMZ Mini SPI pins (#13824)	2019-05-04 22:04:01 -05:00
kAdonis	ee73e17c9b	Hide 'vsense' report row if not used (#13884)	2019-05-04 22:00:24 -05:00
jmdearras	68004174d9	Fix thermistor 501 name (#13839)	2019-05-04 21:40:41 -05:00
Bob Kuhn	c48e6be366	Fysetc panel, RUMBA and ReARM pins, SPI mode 3 (#13900)	2019-05-04 17:59:36 -05:00
Chris	fd9d3ae181	Re-Arm 4x TMC2208 stepper improvement (#13819)	2019-05-04 17:26:13 -05:00
Tanguy Pruvot	e7b3720b81	Menu edit accel in increments of 25 (#13850)	2019-05-04 17:21:58 -05:00
Tanguy Pruvot	7da63fa03f	Fix NOMORE() sign warning in stepper (#13894)	2019-05-04 15:59:38 -05:00
Roman Moravčík	6d0ce033c2	Update Slovak language. (#13840)	2019-05-04 15:58:01 -05:00
InsanityAutomation	3fcab8dbf1	Option to disable fans during pause (#13820)	2019-05-04 15:50:44 -05:00
Chris Pepper	66f7065248	[LPC176x] Update extra script to support Python3 (#13908)	2019-05-04 20:52:28 +01:00
Scott Lahteine	2f32a6612d	Clean up Temperature::set_fans_paused	2019-05-04 14:36:59 -05:00
Marcio Teixeira	15357af67c	Backlash cleanup (#13659) ... …And save backlash, fil. sensor, ExtUI userdata to EEPROM.	2019-05-03 23:53:15 -05:00
Robby Candra	0181e57417	Add a minimum Z change option to power-loss recovery (#13859)	2019-05-02 22:29:05 -05:00
Robby Candra	c369477cb0	Fix bug: diveToFile breaks M23 (#13865)	2019-05-02 15:54:24 -05:00
Tanguy Pruvot	e5438a9a03	settings: store runout sensor on/off (#13876)	2019-05-02 00:47:26 -05:00
Scott Lahteine	e7682eea42	Use Arduino.h include wrapper (#13877)	2019-05-02 00:45:50 -05:00
Tanguy Pruvot	51d1e0f1dd	Auto-mount the SDIO SD card (#13879)	2019-05-02 00:45:21 -05:00
Thomas Moore	ee243e4edf	Fix mixing extruder filament change (#13803)	2019-05-01 21:55:58 -05:00
Scott Lahteine	bf54251a10	Finish, improve, clean up FYSETC_MINI_12864 revisions (#13871)	2019-05-01 20:05:29 -05:00
Scott Lahteine	9372e2603c	Simpler neopixel comment	2019-05-01 13:55:51 -05:00
Tanguy Pruvot	3272d0db01	Update French language (#13866)	2019-05-01 13:00:07 -05:00
Chris Pepper	95beafa9a2	Fix typo	2019-05-01 16:30:21 +01:00
Ludy	408a5f08dc	Update German language (#13853)	2019-05-01 01:25:57 -05:00
Tanguy Pruvot	cf3c746029	Improve French language (#13851)	2019-05-01 01:12:25 -05:00
Clinton James	2740cc64d8	Add SD Release when no SD_DETECT_PIN exists (#13857)	2019-05-01 01:00:21 -05:00
Luu Lac	39ebca6b5f	Fix FYSETC, MINIPANEL, MKS_MINI_12864 display (#13864)	2019-05-01 00:37:52 -05:00
Giuliano Zaro	93dcb537ef	Update Italian language (#13809)	2019-04-30 20:31:40 -05:00
Roxy-3D	142c8e2fed	Remove redundant Frivolous Game Options	2019-04-28 14:03:53 -05:00
Scott Lahteine	e43afb1a58	Clean up SKR pins	2019-04-27 14:56:12 +02:00
Scott Lahteine	9ccbd382e7	Update Watchdog description	2019-04-27 14:56:12 +02:00
Scott Lahteine	b6279abd30	Better THERMAL_PROTECTION_GRACE_PERIOD ... See #13783	2019-04-27 14:40:09 +02:00
chai-md	ed9eaa1942	Fix a comment in fwretract.cpp (#13802)	2019-04-26 09:36:29 +02:00
InsanityAutomation	610fb46683	Fix some ExtUI issues (#13799)	2019-04-26 09:32:01 +02:00
Bob-the-Kuhn	db89fc0304	Revert "bring my copy up to date" ... This reverts commit 503905c628.	2019-04-25 17:38:41 -05:00
Bob-the-Kuhn	503905c628	bring my copy up to date	2019-04-25 12:08:49 -05:00
Bob-the-Kuhn	73726d56b3	Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x	2019-04-25 12:06:01 -05:00
Scott Lahteine	5051909c3c	Update do_select_screen for general use (#13800)	2019-04-24 10:13:44 -05:00
Scott Lahteine	63f6ad3fd2	Basic RAMPS SD_DETECT_PIN override	2019-04-23 18:10:21 -05:00
InsanityAutomation	c6632925e3	Force no move on IDEX full control mode (#13797)	2019-04-23 15:20:59 -05:00
Giuliano Zaro	e2dd2268e8	Add a Z raise-between-probes to G34 (#13791)	2019-04-23 13:40:55 -05:00
Giuliano Zaro	0f9c49ccba	Update Italian language (#13790)	2019-04-23 13:36:05 -05:00
Giuliano Zaro	d77ef437db	Fix warning for redefined DEBUG_PRINT_P (#13789)	2019-04-23 13:35:02 -05:00
Marcio Teixeira	ca7f6ff287	Fix MSG_En messages for consistency (#13788)	2019-04-23 13:31:51 -05:00
Scott Lahteine	6ff81a33c1	Provide JSON values for SOFT_PWM_SCALE	2019-04-22 14:06:14 -05:00
Scott Lahteine	0c4d3e6622	Improve M906 description	2019-04-22 13:48:02 -05:00
Tanguy Pruvot	04ae3ba1fd	Major update to French language (#13784)	2019-04-22 13:31:04 -05:00
chai-md	78d7349fd7	Remove extra Z raises in tool change (#13782)	2019-04-21 21:06:46 -05:00
Kajetan Rzepecki	875e673a8c	Add HAL-based thermal protection grace period for all heaters (#13778)	2019-04-21 20:50:32 -05:00
Bob Kuhn	81ca5a4cd4	Fix and improve FYSETC LCD support (#13767)	2019-04-21 20:48:53 -05:00
felixstorm	4e35e6c705	Fix SS pin in ESP32 HW SPI (#13781)	2019-04-21 17:15:15 -05:00
felixstorm	4a48b70c0b	Fix (re-)defines in HAL_ESP32 (#13780)	2019-04-21 17:14:38 -05:00
Ludy	4228fd3e03	Update German language (#13769)	2019-04-20 15:01:56 -05:00
Kajetan Rzepecki	5f70c876ae	Fix _temp_error-related compile error (#13768)	2019-04-20 13:57:38 -05:00
Kajetan Rzepecki	ea1ee02b53	Disable hardware PWM on ESP32 I2S expander (#13762)	2019-04-20 13:41:17 -05:00
Scott Lahteine	bddb776ddb	Add chamber max-temp check ... Followup to #13756	2019-04-19 22:18:55 -05:00
Marcio Teixeira	d0c1eee53b	Add extra max-temp safety checks (#13756)	2019-04-19 21:37:12 -05:00
Marcio Teixeira	4ac28ba6b3	Add missing file (#13754)	2019-04-19 20:20:45 -05:00
jmdearras	b65cb5704d	Fix, improve FYSETC_MINI_12864 support (#13730)	2019-04-19 20:11:51 -05:00
Scott Lahteine	69c333ead9	More universal Formbot pins ... Replace `ROXYs_TRex` with pre-defines of the relevant pins at the configuration level.	2019-04-18 21:09:34 -05:00
Scott Lahteine	0a6835fbea	More robust HAS_LCD_CONTRAST	2019-04-18 21:09:34 -05:00
Marcio Teixeira	2e3d121ac4	Squelch compiler warning (#13739)	2019-04-18 13:18:49 -05:00
Kajetan Rzepecki	d83a7924e6	Fix ESP32 TOGGLE() with I2S expander (#13743)	2019-04-18 13:15:35 -05:00
Jimmy Wennlund	e6f6ed76c8	Show UBL Activate/Deactivate menu for current state (#13744)	2019-04-18 13:13:05 -05:00
Marcio Teixeira	08f21335a6	Fix bad opcode in LIGHTWEIGHT_UI; add 32-bit HAL and Due compatibility (#13751)	2019-04-18 13:10:58 -05:00
Kajetan Rzepecki	7c8ee0cd5b	Enable more ADC1 channels (pins 32-39) (#13742)	2019-04-18 13:01:24 -05:00
Bob-the-Kuhn	520585c5ed	Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x	2019-04-17 15:34:29 -05:00
Kajetan Rzepecki	e1acc09c6e	Fix LPC1768 HAL SSD* screen init (#13741)	2019-04-17 14:57:50 -05:00
Marcio Teixeira	836435c5ef	Fix action_edit int range bug (#13737)	2019-04-17 14:55:31 -05:00
Antonio Pérez	bf28ad4b6c	Fix clear of Z position last digit (#13731)	2019-04-17 14:52:20 -05:00
Marcio Teixeira	866e2d41dc	Correct range of LCD axis step editing (#13727)	2019-04-16 15:45:31 -05:00
Scott Lahteine	ab8052887f	Add missing MSG_PAUSE_PRINT_INIT_1 for en	2019-04-16 13:54:20 -05:00
petrzjunior	12d340cf2a	Update Czech language (#13729)	2019-04-16 13:53:14 -05:00
Robby Candra	e8dc87a2b7	Fix updated Allen Key pause probe logic (#13723)	2019-04-16 12:35:58 -05:00
Robby Candra	7ca1fea22b	Option to pause probe deployment only when triggered, for manually-deployed allen-key probe (#13698)	2019-04-16 01:32:43 -05:00
Robby Candra	35160dfb7a	Simplify PLR homing when Z homes to max (#13718)	2019-04-16 00:17:27 -05:00
Scott Lahteine	92ed9a2bb6	Fix is_M29 ... Followup for #13013	2019-04-15 23:47:06 -05:00
jmdearras	5f49b65c1f	Move LPC SD options to configs, add MKS_MINI_DISPLAY to SKR boards (#13712)	2019-04-15 22:55:33 -05:00
Bob Kuhn	9b578ca343	Support FYSETC_MINI_12864 on Re-ARM, RAMPS_FD, MKS SBASE (#13717)	2019-04-15 22:54:11 -05:00
Scott Lahteine	9992c424f5	Patch G92.9 flags ... Followup to #13703	2019-04-15 20:26:40 -05:00
ManuelMcLure	b1c13bce58	Fix EEPROM_CHITCHAT (and debug_out.h) (#13716)	2019-04-15 20:21:26 -05:00
Msq001	455ee23499	Fix, improve Power Loss Recovery (#13703) ... - Save and restore workspace offsets - Add retract and purge (hidden) options - Always restore axis relative modes - Use added `G92.9` to do position restores	2019-04-15 18:53:39 -05:00
Laurent	df75a606ff	Support MKS SGen board (#13694)	2019-04-15 17:03:10 -05:00
Kajetan Rzepecki	20dc45bca7	Refactor, fix ESP32 WebSocketSerial (#13689)	2019-04-15 16:32:20 -05:00
Roman Moravčík	db373f130c	Update Slovak language (#13692)	2019-04-15 16:14:49 -05:00
Kajetan Rzepecki	6fe90f0324	Define I2S pins for ESP32 (#13714)	2019-04-15 16:13:59 -05:00
InsanityAutomation	aa0f7afbe6	Fix call to uninitialized PWM pin, heater 2 overlap (#13674)	2019-04-15 15:57:34 -05:00
Bob-the-Kuhn	57aaa9110b	Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x	2019-04-13 21:14:52 -05:00
Scott Lahteine	6a71df2925	Tweak babystep add_steps	2019-04-13 14:14:26 -05:00
Bob-the-Kuhn	9dd4252b39	Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x	2019-04-12 22:07:12 -05:00
Marcio Teixeira	bdfffee037	Modify Z-offset overlay for clarity (#13660)	2019-04-12 15:43:29 -05:00
Stephan	84273557f9	Move and update heated chamber settings (#13671) ... Co-Authored-By: the-real-orca <stephan.veigl@gmail.com>	2019-04-12 15:38:10 -05:00
Ludy	62b4265410	Update German language (#13665)	2019-04-12 14:48:13 -05:00
Scott Lahteine	b18316dd37	Fix some spacing	2019-04-12 13:35:42 -05:00
Scott Lahteine	f2ba0a5ae7	Tweak some formatting	2019-04-12 13:15:37 -05:00
Scott Lahteine	7e58d33a2e	Update some headers	2019-04-12 13:04:04 -05:00
Giuliano Zaro	64ee064ded	Update Italian language (#13661)	2019-04-12 12:22:43 -05:00
Scott Lahteine	14b561f182	Extra AxisEnum values for E0-E5	2019-04-12 12:13:48 -05:00
Robby Candra	9e86fc3831	Require homing to toggle leveling (#13652)	2019-04-11 14:09:41 -05:00
Ludy	9fd3e64ba8	Fix compile error with EXTRUDER>1 (#13651)	2019-04-11 13:58:50 -05:00
Jamie	509dc283f2	Restore declarations of G53-G59 (#13654)	2019-04-11 13:51:05 -05:00
chai-md	2adc37becc	MAGNETIC_SWITCHING_TOOLHEAD (#13629)	2019-04-11 13:29:17 -05:00
ManuelMcLure	492883859e	Don't protect unused CS pins (#13647)	2019-04-10 21:57:57 -05:00
Scott Lahteine	9898f53361	Fix missing IS_SD_PRINTING	2019-04-10 21:48:16 -05:00
Scott Lahteine	1e59a2ac73	Hide pause/stop unless active printing	2019-04-10 19:46:59 -05:00
Scott Lahteine	ae42206500	Fix SD_REPRINT_LAST_SELECTED_FILE	2019-04-10 17:43:08 -05:00
Scott Lahteine	d72946a8d7	Fix LPC1768 build with no watchdog ... Fix issue mentioned at https://github.com/MarlinFirmware/Marlin/pull/13587#issuecomment-481737509	2019-04-10 17:34:15 -05:00
Scott Lahteine	cee3b172b9	Fix Marlin splash screen logic (#13646)	2019-04-10 17:14:57 -05:00
ANMay-ru	052f2ac352	Fix RURAMPS4D baud rate (#13644)	2019-04-10 15:53:21 -05:00
Marcio Teixeira	e6ebd30f60	Fix LCD issue on stepper timeout (#13630) ... - Remove a re-paint of the status screen on stepper timeout, which would cause a garbled LCD with `LIGHTWEIGHT_UI` and could interrupt whatever else the user might be doing in a submenu (such as playing games!) - Use the helper function to reset stepper timeout.	2019-04-10 15:51:48 -05:00
klcjr89	a8edd4f6d4	Fix Azteeg X5 MINI BOARD_NAME (#13632) ... Co-Authored-By: klcjr89 <klcjr89@users.noreply.github.com>	2019-04-10 15:46:12 -05:00
Scott Lahteine	5018fdacbe	Support FYSETC_MINI_12864_PANEL (#13365)	2019-04-09 18:34:29 -05:00
InsanityAutomation	4900c28bf6	Fix IDEX tool-change, and more (#13614)	2019-04-09 18:33:40 -05:00
InsanityAutomation	ba31d39f6d	Azteeg X5 Mini support (#13425)	2019-04-08 23:10:45 -05:00
Scott Lahteine	9cb5c57b84	Adjustments to ui8tostr_percent	2019-04-08 21:47:50 -05:00
Scott Lahteine	321a5e6580	Fix SD card reselect when scrolled (#13624) ... - Change encoder position to 16-bit integer. - Fix `SD_REPRINT_LAST_SELECTED_FILE` when the screen is scrolled.	2019-04-08 21:10:41 -05:00
Scott Lahteine	0e3c9e726d	Set default Raptor runout/caselight pins	2019-04-08 18:18:08 -05:00
Scott Lahteine	5e38d70697	Fix M217 report label, general cleanup	2019-04-08 18:18:08 -05:00
Scott Lahteine	fae2b7edc3	Update MMU2 code style	2019-04-08 18:13:42 -05:00
Scott Lahteine	c8a83fb122	SPINDLE_LASER_ENABLE => SPINDLE_LASER_ENA	2019-04-08 18:13:41 -05:00
Scott Lahteine	9abe9aff56	Confirm before starting SD print (#13616)	2019-04-08 13:44:35 -05:00
Scott Lahteine	7e0008f5b3	Fix SETCURSOR_RJ	2019-04-07 20:25:54 -05:00
Robby Candra	81c2c3ec11	Continuous filename scrolling (#13609)	2019-04-07 16:58:32 -05:00
Ludy	c29820f649	Suppress compile warning (#13612)	2019-04-07 16:53:30 -05:00
Scott Lahteine	a2b3ad6d0a	Don't override RGB LED pins, by default	2019-04-07 16:42:26 -05:00
Bob Kuhn	9a56d90150	Fix M43 on LPC176x (#13587) ... The real fix. PR #13568 was wrong.	2019-04-06 18:06:07 -05:00
Roxy-3D	9cee81d47e	Option to show babysteps total since G28 (#13580)	2019-04-06 18:04:34 -05:00
Scott Lahteine	3221658a78	Adjust park position description	2019-04-05 20:40:50 -05:00
Scott Lahteine	028b78f623	Suppress a compile warning	2019-04-05 20:06:19 -05:00
Scott Lahteine	cf12fc8366	Expand on serial debugging (#13577)	2019-04-05 20:02:46 -05:00
Marcio Teixeira	bf7b28b456	Fix incorrect variable name (#13585)	2019-04-05 19:04:46 -05:00
Kajetan Rzepecki	27693cec29	Extend ESP32 HardwareSerial with flushTX. (#13588)	2019-04-05 19:04:02 -05:00
Alexander Gavrilenko	3c47e1b4d1	Support Black STM32F407VET6 with RAMPS-like shield (#13524)	2019-04-05 15:30:19 -05:00
VBen	0dfd76ba55	Fix Z hotend offset broken by parking extruder tool change (#13582)	2019-04-05 15:28:32 -05:00
Scott Lahteine	027a901bec	Trim whitespace	2019-04-05 15:04:23 -05:00
Kajetan Rzepecki	692a0198f9	Fix SPISettings frequency parameters in ESP32 HW SPI (#13573)	2019-04-04 23:17:14 -05:00
Kajetan Rzepecki	63d95862fa	Add FastIO TOGGLE for ESP32 (#13574)	2019-04-04 23:15:17 -05:00
drzejkopf	0992d1a4c8	Fix Invaders game compile error (#13575)	2019-04-04 23:13:11 -05:00
Robby Candra	cd1ef33c8c	Drop extra PLR save test (#13554)	2019-04-04 22:47:00 -05:00
Scott Lahteine	72c7751768	Fix SERIAL_POS in use with DEBUG_OUT	2019-04-04 22:12:03 -05:00
Scott Lahteine	cacec5764a	Clean up whitespace	2019-04-04 22:12:02 -05:00
Scott Lahteine	83e214478e	Click-hold to exit Invaders, fix Brickout compile	2019-04-04 17:07:50 -05:00
Scott Lahteine	240ea1bbb3	Split up games into separate files	2019-04-04 03:06:19 -05:00
Marcio Teixeira	27a4927ed1	Add option to move away from endstop after homing. (#13557) ... Add option to move away from endstop after homing. - Add `ENDSTOP_BACKOFF` for printers with a recessed Z home button (Lulzbot TAZ 6). - Also prevents chattering when sensorless homing with axes against bumpers.	2019-04-04 02:47:19 -05:00
InsanityAutomation	d44e5b1fde	Fix stepper direction macros, multi-nozzle scope (#13569)	2019-04-04 02:44:07 -05:00
Scott Lahteine	10b9632bed	Fix menu history item selection	2019-04-04 02:41:23 -05:00
Scott Lahteine	f1810689ff	Fix bootscreen condition	2019-04-04 00:19:47 -05:00
Kajetan Rzepecki	b21ca53dfc	SPIFFS-backed PersistentStore for ESP32 (#13566)	2019-04-03 20:28:26 -05:00
Scott Lahteine	af92ee9dd6	No PLR include needed in queue.cpp	2019-04-03 18:26:31 -05:00
Scott Lahteine	5d2c5877f7	DOGM bootscreen cleanup	2019-04-03 18:10:50 -05:00
Scott Lahteine	2aa35e95af	More G26 arc cleanup ... Followup to #13531	2019-04-03 16:03:21 -05:00
Scott Lahteine	20a41e2f7b	SDCARD_RATHERRECENTFIRST with SDCARD_SORT_ALPHA	2019-04-02 22:25:18 -05:00
Robby Candra	46445a5a16	Event G-code for Stop SD Print (#13547) ... Co-Authored-By: 7eggert <7eggert@gmx.de> Co-Authored-By: robbycandra <robbycandra.mail@gmail.com>	2019-04-02 22:09:30 -05:00
Kajetan Rzepecki	2cfa9e9008	Fixed chamber-related compile error (#13552)	2019-04-01 17:53:56 -05:00
Scott Lahteine	a0a5c31c05	Power-Loss initialization fix (#13553) ... - Only save to PLR file on moves with E and X or Y - Save to PLR after any long-ish Z downward move	2019-04-01 17:52:45 -05:00
Scott Lahteine	8b7c3eec83	Games, for fun (and stress-testing) (#13464)	2019-04-01 17:48:54 -05:00
InsanityAutomation	fbc7b51a24	Use NO_FETCH for Dual X G28 (#13539)	2019-04-01 17:48:21 -05:00
Scott Lahteine	5de7b5b35e	Games, for fun (and stress-testing) (#13464)	2019-04-01 15:43:48 -05:00
InsanityAutomation	4961d8aa3e	Update G28.cpp (#13539)	2019-03-31 19:50:40 -05:00
Scott Lahteine	de0046fc8b	Fix empty HAS_TIMER macros	2019-03-30 23:04:40 -05:00
Kajetan Rzepecki	c9079165ee	Fix MAX6675 readout with Hardware SPI (#13530)	2019-03-30 22:31:49 -05:00
ManuelMcLure	04086fc455	Minor optimization to ARC_SUPPORT code (#13531)	2019-03-30 22:29:37 -05:00
Robby Candra	a3f67acd6d	Fix Power Loss Recovery file delete (#13522)	2019-03-30 13:14:58 -05:00
Marcio Teixeira	d992dfe7d5	Use the percent util func in the string func. (#13523)	2019-03-30 13:00:31 -05:00
drzejkopf	b1f739e27b	CR10_STOCKDISPLAY support in Bigtreetech SKR (#13516)	2019-03-29 14:19:18 -05:00
Marcio Teixeira	5679fae11e	UltraLCD enhancements (lower fan resolution, backlash menu) (#13519)	2019-03-29 14:07:43 -05:00
Msq001	f0d14b83bc	Save/restore Relative modes in Power-Loss Recovery (#13501)	2019-03-29 13:40:42 -05:00
Marcio Teixeira	c6466c23fe	Silence signed/unsigned comparison warning. (#13508)	2019-03-29 13:33:45 -05:00
InsanityAutomation	7240e3a68f	Allow G26 with no heated bed (#13511)	2019-03-29 13:32:43 -05:00
Alexander Gavrilenko	6d9aaca082	Fix compilation error for MKS Robin (#13506)	2019-03-29 12:40:24 -05:00
Scott Alfter	c6dbe6e9d6	Fix Teensy 3.5/3.6 __get_primask (#13514)	2019-03-29 12:23:09 -05:00
Alexander Amelkin	e40636a7c1	Replace digitalPinHasPWM with HAS_TIMER (#13520)	2019-03-29 12:21:14 -05:00
Scott Lahteine	b46ca9aa94	Less timely comment, tweak conditions	2019-03-26 19:20:13 -05:00
InsanityAutomation	eb91f08725	Update descriptions and dont call unneeded functions	2019-03-26 11:24:52 -04:00
Ludy	fe346cd4d1	Fix DEBUG_EEPROM_READWRITE compile error (#13492)	2019-03-26 04:12:22 -05:00
Sam Lane	e3ab54753b	Add extra Linear Advance factors (#13490)	2019-03-26 04:02:27 -05:00
Chris Pepper	ffc2c2d7c5	Move FAST_PWM_FAN code to HALs (#13491)	2019-03-26 01:03:23 -05:00
Thomas Moore	263f8edff8	Disable volumetric extrusion during G26 (#13479)	2019-03-25 22:41:52 -05:00
Bob Kuhn	6bd0a0be97	Relocate DUE Stepper ISR to TC0,2 (#13481)	2019-03-25 22:39:51 -05:00
Thomas Moore	13a12f8a87	Fix UBL mesh editor on delta (#13478)	2019-03-25 22:04:57 -05:00
Scott Lahteine	d2e0c03afb	Remove trailing whitespace	2019-03-25 20:51:38 -05:00
Marcio Teixeira	7462fe3068	Fix compile error, squelch warnings (#13487) ... - Fix path to `bedlevel.h` include file - Add default to `case` statements to suppress warnings	2019-03-25 20:41:38 -05:00
Yannik Sembritzki	0d3ea59bcf	Add pins for Dual Z UART on SKR 1.3 (#13474) ... Fix #13470	2019-03-24 20:09:00 -05:00
pinchies	ef3b93daa1	Fix STM32F1 SD-based EEPROM emulation (#13475) ... If `openFile` is given `true`, then it has read-only access. Because all the writing occurs on the next line, this breaks SD card as EEPROM.	2019-03-24 20:07:31 -05:00
Chris Pepper	aacc1148b0	Fix M106 for index > extruders (#13473)	2019-03-24 20:03:53 -05:00
Thomas Moore	c5e96544b5	Fix vtool compiler warning (#13476)	2019-03-24 20:02:28 -05:00
Thomas Moore	02dc72acb6	Disable ABL when leveling corners (#13471)	2019-03-24 20:01:18 -05:00
7eggert	d96f7d6068	Minimum segments for G2/G3. Better for small arcs. (#13466)	2019-03-24 19:53:47 -05:00
Scott Lahteine	380c771988	Handle word-padded flash-based eeprom (STM32F1) ... Fix #13445	2019-03-24 19:14:04 -05:00
Scott Alfter	32332bcd03	Proceed with Teensy 3.5/3.6 HAL (#13450)	2019-03-24 00:08:32 -05:00
Scott Alfter	407202cc0f	Fix BLTouch pre-3.0 compatibility (#13454)	2019-03-23 23:28:15 -05:00
Marcio Teixeira	a0ca98f699	Additional ExtUI features (#13449)	2019-03-23 23:09:18 -05:00
Sam Lane	a8fa275dc6	Fix Fan 0 responding to all fan speeds (#13444)	2019-03-23 23:00:31 -05:00
InsanityAutomation	5eeffab5e5	Fix BLTouch Menus (#13441)	2019-03-23 22:58:34 -05:00
Scott Lahteine	d8329d858d	Default argument to defer_status_screen	2019-03-23 16:33:37 -05:00
Giuliano Zaro	9562a02c5a	Update Italian language (#13440)	2019-03-20 18:26:55 -05:00
drzejkopf	70e6a3db8a	Add LEVEL_CORNERS_HEIGHT to LEVEL_BED_CORNERS (#13439)	2019-03-20 18:26:12 -05:00
Roman Moravčík	f3cf95a937	Update Slovak language. (#13435)	2019-03-20 16:37:34 -05:00
Scott Lahteine	144018736a	Use USES_Z_MIN_PROBE_ENDSTOP	2019-03-18 16:58:31 -05:00
InsanityAutomation	5b2c37d6c1	Followup to BLTouch (#13422)	2019-03-18 16:31:11 -05:00
InsanityAutomation	3fb8489ae3	EXTUI and UBL compilation fixes (#13420)	2019-03-17 07:57:54 -05:00
Scott Lahteine	b376c7e374	Group DISABLED items	2019-03-17 07:56:35 -05:00
Scott Lahteine	58bca67883	Unify status scrolling further	2019-03-17 07:56:35 -05:00
Scott Lahteine	c4443f885e	finishstatus => finish_status	2019-03-17 07:56:35 -05:00
InsanityAutomation	691e5c3bb8	BLTouch V3.0 support (#13406)	2019-03-17 05:57:25 -05:00
Scott Lahteine	49cf92dc36	Extended condition macros (#13419) ... Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`	2019-03-16 23:43:06 -05:00
Tobias Frost	d20eab4f83	Fix macro in set_color() (#13417)	2019-03-16 19:05:59 -05:00
Ludy	59353546e8	Fix BUTTON_EXISTS and misplaced comma (#13411) ... Fixes #13410 and redeclaration of `BUTTON_EXISTS`	2019-03-16 11:59:12 -05:00
InsanityAutomation	09eb30dc05	IDEX Mirror mode based on Formbot / Vivedino Symmetric mode (#13404)	2019-03-15 22:46:27 -05:00
Scott Lahteine	5c1aa5162d	Adjust M206 output in M503 for DELTA	2019-03-15 19:20:40 -05:00
Scott Lahteine	ad8b82d054	Fix KILL_PIN assignment for MKS_MINI_12864 ... According to #13397	2019-03-15 19:20:40 -05:00
Scott Lahteine	3a916b4ef2	Create bresenham.h	2019-03-15 19:20:39 -05:00
Karl Andersson	5d3928cb01	PWM is not defined on Arduino Core STM32 (#13405)	2019-03-15 19:14:06 -05:00
Scott Lahteine	9a515cbd32	Fix Pause Print message and behavior (#13394)	2019-03-14 02:26:07 -05:00
Scott Lahteine	f5bcc00570	Unify debugging output with debug_out.h (#13388)	2019-03-14 02:25:42 -05:00
Andrei Pozolotin	cc8a871705	Add capability string CHAMBER_TEMPERATURE (#13391) ... Reference: #13380	2019-03-13 18:09:22 -05:00
Scott Lahteine	67bee06e43	No patch needed for non-libmaple analogWrite ... See https://github.com/pinchies/Marlin/pull/1#issuecomment-471388743	2019-03-13 07:21:10 -05:00
Scott Lahteine	f89b375fb9	Fixes and improvements for PWM pins (#13383)	2019-03-13 06:51:15 -05:00
Scott Lahteine	87162658c4	Fix and improve software endstops (#13386)	2019-03-13 05:48:36 -05:00
Scott Lahteine	6214c997c0	Remove includes of <binary.h>	2019-03-13 05:32:33 -05:00
Scott Lahteine	4555ae448f	Fixups for ESP32	2019-03-13 05:32:33 -05:00
Scott Lahteine	a5ea3e2f15	Fix hotend offset on switching toolhead change ... See commentary at #11623	2019-03-13 05:32:21 -05:00
jmz52	8e0ac93d60	Fix 'UNUSED redefined' compiler warning (#13387)	2019-03-13 04:34:02 -05:00
Hadrien Jouet	0278ad0a6d	Add ESP32 WiFi interface (#11209)	2019-03-13 00:48:08 -05:00
InsanityAutomation	c03df89921	ExtUI Mesh Leveling Extensions (#13363)	2019-03-13 00:45:52 -05:00
InsanityAutomation	050eac03af	Single X Duplication Extension (#13373) ... * Multi-nozzle selective duplication * Use a bit-mask, reduce stepper_indirection.h size * Tweak the multi-nozzle duplication description * Use 'S' as a bool in M605 * Add HAS_DUPLICATION_MODE conditional * Remove '_MODE' from the option name * M605 in the style of Stacker M280 * Also include direct mask style (P)	2019-03-13 00:42:50 -05:00
Scott Lahteine	ad91476d26	Fix USEABLE_HARDWARE_PWM	2019-03-13 00:12:46 -05:00
Scott Lahteine	d63da4592d	Tweak to SCARA_move_to_cal	2019-03-12 22:06:50 -05:00
Scott Lahteine	51ff5b68fa	Clean up fastIO ahead of PWM patch	2019-03-12 20:39:55 -05:00
Scott Lahteine	388babbcea	Tweak SERIAL_PRINTF	2019-03-11 20:58:27 -05:00
Scott Lahteine	d94e077901	Apply HAS_HOTEND_OFFSET where needed	2019-03-11 20:58:27 -05:00
Scott Lahteine	11d6a939df	Always define axis_unhomed_err	2019-03-11 20:58:27 -05:00
7eggert	10c8c034bd	Allow both encoder and ADC keypad (#13355)	2019-03-11 18:10:56 -05:00
Andrei Pozolotin	31ff7da7ac	Add missing CHAMBER options (for M141) (#13371)	2019-03-11 16:50:07 -05:00
Scott Lahteine	0375e92847	Followup to serial rework ... As mentioned in #13370	2019-03-11 16:46:04 -05:00
jmz52	013bb469ca	Fix compilation for STM32F1 with no SDIO (#13366)	2019-03-11 16:40:51 -05:00
Scott Lahteine	e52bcc9408	Limit top bed temp to BED_MAXTEMP - 10 ... The chances of a 10° overshoot is pretty minimal.	2019-03-11 16:32:34 -05:00
Scott Lahteine	98b55421a5	Clean up some temp config	2019-03-11 16:31:23 -05:00
InsanityAutomation	785a7028bf	Followup to 'volatile' patch (#13369) ... Originally #13344	2019-03-11 15:01:57 -05:00
Scott Lahteine	aa1d587128	Some LCD code cleanup	2019-03-11 05:07:31 -05:00
Scott Lahteine	fa11427ec6	Remove obsolete LCD_CONTRAST	2019-03-11 03:33:07 -05:00
pinchies	4df9509ead	Add support for printers with inverted fan pins (#13362) ... Add support for printers with inverted fan pins by adding `#define FAN_INVERTING 1` to `Configuration_adv.h` and modifying the fan write macros.	2019-03-10 20:51:21 -05:00
Scott Lahteine	1f7e220387	Make HAL ISR macros function-like	2019-03-10 20:44:27 -05:00
Scott Lahteine	e3ce346f24	Report position to host in Nozzle::park	2019-03-10 19:09:28 -05:00
Scott Lahteine	77b4176152	Use lib include for bit_constants.h	2019-03-10 19:09:28 -05:00
Scott Lahteine	3419099f0a	Clean up whitespace	2019-03-10 19:09:28 -05:00
pinchies	4c43e6c48b	Fix "spontaneous heating" issue (WRITE bug) on STM32 (#13356) ... Should fix "spontanous heating" problems due to order of operations error. Error occurs at least with ststm32 v5.1.0 in PlatformIO.	2019-03-10 17:25:54 -05:00
Michiel Baird	b824a517aa	Add G38.4 and G38.5 (#13348)	2019-03-10 17:22:09 -05:00
Bruce j Beare	e4d080e63c	Reset after kill with a button on the KILL_PIN (#13091)	2019-03-10 09:57:38 -05:00
MoellerDi	c36989c39e	Fix chamber temperature measurement (#13350)	2019-03-10 09:51:13 -05:00
Scott Lahteine	12503fce06	Followup to wait_for_user fix	2019-03-10 09:14:02 -05:00
Scott Lahteine	33a08fc6f7	Fix typos from temperature rework ... Followup to #12201	2019-03-10 08:28:16 -05:00
Tobias Frost	2efbcc90c5	Fix wait_for_user compile error (#13352)	2019-03-10 08:07:41 -05:00
Tobias Frost	60e82e3929	Send notifications to ExtUI for M0/M1 (#13344) ... - Send notifications to ExtUI for M0/M1 - wait_for_user can be non-volatile (not changed by interrupt) C / C++ compilers don't optimize away reads of non-volatile variables when a function call is used between accesses, because *any* variable could be changed by the function call. Since `wait_for_user` can't be changed without a function call, it should be non-volatile so the compiler can optimize away cases where it is read more than once without an intervening function call.	2019-03-09 14:20:37 -06:00
Marcio Teixeira	00fc43144a	Follow up fixes to various PRs. (#13334) ... - Ensure `MarlinUI:get_progress` is defined for `ExtUI`. - Fix for `BACKLASH_SMOOTHING` with small segments. `BACKLASH_SMOOTHING` with extremely small segments failed to fully correct due to the correction factor being rounded down. Rounding up ensures the entire backlash will converge to zero even for small segments. - Add pinout for the beta revision `EINSY_RETRO`. - Update soft endstops with tool offsets (for toolchange et. al. move clamping) (#12568)	2019-03-09 14:20:37 -06:00
Scott Lahteine	c7d618b4d9	Fix SERIAL_ECHOLNPAIR ... Fix #13333	2019-03-09 14:20:37 -06:00
InsanityAutomation	d54741eda8	Update some G26 plausible values. Add speed control. (#13330)	2019-03-08 03:13:44 -06:00
Msq001	fb3302feda	Fix STM32F1 Serial and ADC pins (#13331)	2019-03-08 02:21:32 -06:00
Reece Kibble	dbead66988	Allows user to set (almost) any PWM frequency (#12638)	2019-03-08 02:15:42 -06:00
Tobias Frost	afbec5ff7e	Have ExtUI::getProgress use ui.get_progress (#13328)	2019-03-07 18:00:38 -06:00
3dlabsio	645ca7af7a	M141 Heated Chamber, Temperature rework (#12201)	2019-03-07 02:09:39 -06:00
Scott Lahteine	44571775bd	Further support for 6 extruders	2019-03-07 01:00:56 -06:00
Scott Lahteine	893ee68b52	Clean up trailing whitespace	2019-03-06 01:02:43 -06:00
Scott Lahteine	39f1222060	One fewer G29 error string	2019-03-05 23:04:52 -06:00
Scott Lahteine	cfdb38eda4	Allow SERIAL_ECHOPAIR to take up to 12 pairs (#13311)	2019-03-05 06:46:19 -06:00
Scott Lahteine	4771e372a1	Update criteria for PAUSE/RESUME/STOP menu items (#13294)	2019-03-05 06:46:06 -06:00
Tobias Frost	56fdcf93d1	Disallow SD_DETECT_INVERTED with FYSETC F6. (#13307)	2019-03-05 06:45:28 -06:00
Tobias Frost	7ce13a6ec1	Fix a print_job_timer compile error (#13304)	2019-03-05 06:39:15 -06:00
Tobias Frost	6df51201ae	Include EXTENSIBLE_UI in single LCD sanity check (#13306)	2019-03-05 06:33:36 -06:00
Scott Lahteine	2e5a3b01fd	Save Power Loss Recovery only on move commands	2019-03-05 02:43:29 -06:00
Scott Lahteine	15738ea506	Update a motion comment	2019-03-05 00:50:29 -06:00
Scott Lahteine	bc87e97357	Prevent a tool change move out of bounds	2019-03-05 00:50:29 -06:00
Scott Lahteine	2212da453a	Distinguish between analog/digital auto fans (#13298)	2019-03-05 00:41:31 -06:00
Chris Pepper	2513f6b550	Fix multiport G28 with Binary Transfer (#13308)	2019-03-04 16:44:54 +00:00
Chris Pepper	38bef9da91	Report auto temp to both serial ports, if available (#13301)	2019-03-03 21:03:48 -06:00
Robert Mendon	367d392880	Init stepper current after stepper pins are set up (#13302)	2019-03-03 20:58:02 -06:00
InsanityAutomation	bf8b38e0f7	Relocate configs above Marlin/src folder (#13299)	2019-03-03 16:50:56 -06:00
Scott Lahteine	d71dc5cf42	Fix for Ender 4 fan/case light pin ... See #12731	2019-03-03 07:43:27 -06:00
Anthony Rich	7640b328df	Support for Tronxy X5S 2e (#13297)	2019-03-03 07:41:05 -06:00
Scott Lahteine	599cdc3f0f	Remove dead code from get_pid_output ... See #12981	2019-03-03 05:45:20 -06:00
Scott Lahteine	35ae5daf2d	Split up sdcard G-codes	2019-03-03 01:52:15 -06:00
Scott Lahteine	3f36a38512	Clean up some pre-serial-redirect includes	2019-03-03 01:52:15 -06:00
Scott Lahteine	fa0d909dd3	Add FIL_RUNOUT_PIN for BIGTREE_SKR_V1.3 ... See #13267	2019-03-03 00:27:47 -06:00
Ludy	bd4160dbaf	Unused CS_ACTUAL_sb (#13282)	2019-03-02 17:30:30 -06:00
Vasily Evseenko	71773b128d	Fix stepper use before init. Add Ultimaker2+ Extended clone config (#13284)	2019-03-02 17:29:02 -06:00
Scott Lahteine	edc4e037c4	Add a note to G10	2019-03-02 17:19:36 -06:00
Tobias Frost	57afd0ab37	Fix range check bug in FileList::seek() (#13286) ... When `count()` returns 0, `pos > (count()-1)` will always yield `true` due to integer underflow.	2019-03-02 16:43:08 -06:00
kAdonis	05c2f80826	Fix bug in wait-for-heatup (#13290)	2019-03-02 16:29:10 -06:00
Chris Pepper	b0553d2d97	Add M997 support and simple implementation for LPC176x (#13281)	2019-03-01 20:11:50 -06:00
Scott Lahteine	fa236e9718	General cleanup ahead of L64XX	2019-03-01 19:58:07 -06:00
Scott Lahteine	2f1e1dcb42	Gradual step towards EXTRUDERS 0 support	2019-03-01 01:51:24 -06:00
Scott Lahteine	99d0022fae	Drop the Z_MIN_PROBE_ENDSTOP option (#13276)	2019-03-01 00:27:45 -06:00
Scott Lahteine	9a6b90f47d	TMC2660.h comment tweaks	2019-03-01 00:25:22 -06:00
Scott Lahteine	a2e3226597	Init XYZ to configured home position	2019-02-28 22:10:26 -06:00
Scott Lahteine	4fbbce9a35	Marlin Dev Mode for DOGM status screen	2019-02-28 22:10:26 -06:00
Scott Lahteine	998ce55be0	Alternative fan bitmap	2019-02-28 22:08:20 -06:00
InsanityAutomation	e2e2a55d9b	Add thermistor type 67 SliceEng (#13275)	2019-02-28 19:44:17 -06:00
Msq001	5b7ad3a5a0	Fix SKR onboard TF card CS pin (#13272)	2019-02-28 19:41:19 -06:00
Scott Lahteine	7fde3ed915	Skip hysteresis check when temp is already close to target ... To eliminate a long delay during pause, park, and filament change	2019-02-28 14:35:19 -06:00
Chris Pepper	7de6476b3d	Fix binary protocol error	2019-02-28 02:31:42 +00:00
Scott Lahteine	2c10222e87	card.transfer_port => transfer_port_index	2019-02-27 20:14:17 -06:00
Chris Pepper	4ab433d391	Fix binary protocol with one serial port (#13270) ... - The `sdcard.transfer_port` variable is Marlin's internal serial port index, not the physical serial port number. - Added packet number to "ok" response so hosts don't need to wait for the ACK. - Renamed feature to `BINARY_FILE_TRANSFER`, as the speed up is only consequential to the ability to transfer binaries over serial.	2019-02-27 19:57:48 -06:00
InsanityAutomation	eb4bf93ea4	Add more Babystep options (#13262)	2019-02-27 04:38:56 -06:00
Scott Lahteine	f37df28d17	UBL G29 T current position fix ... Counterpart to #12845	2019-02-26 22:25:53 -06:00
Msq001	f8a39919fa	Add Bigtree SKR 1.3 board (#13267) ... Co-Authored-By: Msq001 <msq001@users.noreply.github.com>	2019-02-26 21:30:00 -06:00
Bob Kuhn	ddbe4cfa20	Printrboard G2 support (#13116)	2019-02-26 21:03:13 -06:00
Scott Lahteine	4200f9ed62	Hide freeMemory et.al. warnings	2019-02-26 18:03:00 -06:00
Scott Lahteine	dc88747770	Fix Due GET_ARRAY_IS_DIGITAL ... Co-Authored-By: bob-the-kuhn <bob.kuhn@att.net>	2019-02-26 17:49:14 -06:00
Scott Lahteine	a79b9bbe6b	Cleanup whitespace, add a const	2019-02-26 17:49:14 -06:00
Giuliano Zaro	2616e4d4d9	Remove duplicated 'chitchat' defines (#13258)	2019-02-25 16:13:01 -06:00
Scott Lahteine	5d28575d4d	Clean up some motion code	2019-02-25 16:01:42 -06:00
Scott Lahteine	808b076000	Update some ABL/UBL conditionals	2019-02-25 16:01:42 -06:00
Scott Lahteine	833c2e54a1	Add an empty flushTX to MarlinSerialUSB_Due	2019-02-25 13:48:14 -06:00
Scott Lahteine	38363902c7	Fix sanity checks for distinct E factor settings ... Reference #13156	2019-02-25 00:20:36 -06:00
Scott Lahteine	64253e1a58	Followup to serial reform ... Reference #13250	2019-02-25 00:20:36 -06:00
Minims	92a4984066	Fix G34 probe position (#13251)	2019-02-24 13:57:30 -06:00
Scott Lahteine	e15354e387	Simplify serial port redirect (#13234)	2019-02-23 22:53:01 -06:00
Chris Pepper	88cc1d1a31	Fix Preprocessor syntax in Re-ARM pins file (#13247)	2019-02-24 01:36:58 +00:00
Karl Andersson	76e9ee33aa	Fix include order to make SERIAL_PORT_2 work (#13241)	2019-02-23 16:56:09 -06:00
Bruce j Beare	562f2321d2	Fix a G34 bug, allow negative Z corrections (#13240)	2019-02-23 02:41:52 -06:00
FernandoVelcic	edf025ed8d	Update Spanish language (#13236)	2019-02-23 00:41:02 -06:00
Scott Lahteine	02fec89a0d	Turn fans off in zero_fan_speeds ... Addressing #13231	2019-02-22 21:00:44 -06:00
Scott Lahteine	15aa932aa6	HAL for Linux (#13146)	2019-02-22 19:09:10 -06:00
kwalters3	5eb82ca6a8	Change SSD1306_OLED_I2C_CONTROLLER to HAS_SSD1306_OLED_I2C (#13223)	2019-02-22 19:08:36 -06:00
Marcio Teixeira	109e67169c	Define G21 as NOOP w/o INCH_MODE_SUPPORT (#13229) ... Ticket #13228 If `INCH_MODE_SUPPORT` is undefined, G20 is an unknown command as it should be (Marlin is, by default, operating in metric mode). G21, however, is found in many slicers and printer start gcode sections and should be accepted (as a NOOP) to avoid the unknown commands.	2019-02-22 15:35:32 -06:00
AnHardt	31b0be74af	Fix autotemp_factor menu setting (#13226) ... Fix #12643 Only factors above 1 can have a 'positive' effect.	2019-02-22 15:30:17 -06:00
Evgeny-SPB	f6ab62bc13	Fix Creality CR-10 S5 filament change (#13219)	2019-02-21 05:40:49 -06:00
Thomas Moore	9f5e4e5ad8	Update LPC1769 Pins Files (#13183)	2019-02-21 00:54:05 -06:00
Greg Nutt	608a6810e7	Fix DOGLCD_A0 pin in pins_Smoothieboard.h (#13217)	2019-02-20 18:08:49 -06:00
Scott Lahteine	80359c9937	Add more parameters to M240 ... Co-Authored-By: shitcreek <45380455+shitcreek@users.noreply.github.com>	2019-02-20 14:51:36 -06:00
Scott Lahteine	a43e892fb5	Use 8-bit i2c address on LPC platform ... Fix #9799 — hopefully not a unicorn	2019-02-20 06:27:26 -06:00
Scott Lahteine	631d867dc9	HAL cleanups	2019-02-20 06:27:26 -06:00
Scott Lahteine	89bbc30a09	Fix init of power supply pin ... Fix #13184	2019-02-20 05:29:05 -06:00
Scott Lahteine	44c22e3935	Provide a default MAX6675_SS_PIN for ReARM ... See #8010	2019-02-20 05:06:06 -06:00
Scott Lahteine	3c9a7926c2	Fix compile error with JUNCTION_DEVIATION ... See #13000	2019-02-20 04:54:26 -06:00
Scott Lahteine	758c6c9464	Very minor SPI speedup	2019-02-20 04:36:23 -06:00
Scott Lahteine	422dd6666e	Fix Due EEPROM write bug ... See #13065	2019-02-20 04:36:23 -06:00
Scott Lahteine	03e109c4a3	FLASH_EEPROM => FLASH_EEPROM_EMULATION	2019-02-20 04:36:23 -06:00
Scott Lahteine	50917ccda6	Tweak some u8g interface code	2019-02-20 04:26:34 -06:00
LinFor	ba39186364	TMC_DEBUG optimization and improvements (#13135)	2019-02-20 02:22:42 -06:00
Scott Lahteine	1424b368cf	Tweak M122 comment in configs	2019-02-19 16:20:18 -06:00
Scott Lahteine	3a1b6fe8c1	Coding standards	2019-02-19 14:58:39 -06:00
InsanityAutomation	19af90face	Fix a host action compile error (#13208)	2019-02-19 14:47:31 -06:00
Marcio Teixeira	992cdc8d14	Fix host action / G-code ordering in event_probe_failure (#13207) ... Observing from the console, it makes the most sense to do `//action:probe_retry` before executing commands.	2019-02-19 14:45:03 -06:00
InsanityAutomation	33a6d52965	Fix a RAPTOR2 pin conflict (#13205)	2019-02-19 14:42:02 -06:00
InsanityAutomation	52665f54ad	Fix bad Purge More logic (#13193)	2019-02-19 14:37:18 -06:00
Scott Lahteine	18458ec42b	Error in Smoothieboard for unsupported display	2019-02-19 14:17:33 -06:00
InsanityAutomation	d4ed9b3ef1	Babystep also requires homing (#13191)	2019-02-17 14:35:45 -06:00
InsanityAutomation	ca7b2f574f	Fix condition on tool change filament swap menu (#13190)	2019-02-17 12:33:46 -06:00
Roman Moravčík	208ab8b366	Fix compilation with one service interval (#13185)	2019-02-17 12:32:47 -06:00
Roman Moravčík	567d03a269	Update Slovak language (#13187)	2019-02-17 12:29:49 -06:00
Alain Martel	27203c62b8	Enable M240, set photo pins for 3DFabXYZ i3 (#13174)	2019-02-15 21:16:39 -06:00
Evgeny-SPB	3025ddf179	Support for Creality CR-10 5S (#13173)	2019-02-15 21:09:44 -06:00
Scott Lahteine	e00aad84af	Add M240 parameters D I J R S	2019-02-14 20:00:40 -06:00
Marcio Teixeira	31c240a8db	Enhancements to G425 (#13159) ... - Turn off bed leveling prior to calibrating. - This prevents lateral probes from having a Z component that triggers the Z endstop and causes the motion to be aborted. - Got rid of static const float arrays "dimension" and "true_center" - Frees up 24 bytes of SRAM - Changed incorrect use of "bool" for float in backlash macros. - Replaced arguments with 0.0f and 1.0f for clarity. - Now only disables soft endstops (since calibration cube is outside of bed) - Not necessary to disable global endstops	2019-02-14 16:45:31 -06:00
Andy Shaw	84fc400aba	Update BIQU SKR V1.1 pins, add TMC2130 settings (#13166) ... * Remove untested displays add TMC2130 configs. * Remove references to the ReARM, delete untested displays. Add TMC2130 settings. Cleanup spacing, etc.	2019-02-14 16:43:56 -06:00
Scott Lahteine	ab2816c870	Patch for M240	2019-02-14 15:13:57 -06:00
Scott Lahteine	d2bdb71c13	Add PHOTO_GCODE option, photo trigger physical move (#13168)	2019-02-14 15:09:35 -06:00
Scott Lahteine	be9a409980	Fix M125 XY parameters, export get_homing_bump_feedrate	2019-02-14 05:25:46 -06:00
Scott Lahteine	ce40c2e87c	Use do_blocking_move_to(ref, fr)	2019-02-14 02:22:08 -06:00
Giuliano Zaro	bdc2f10b90	Update Italian language, fix unused var warning (#13164)	2019-02-13 21:05:18 -06:00
Marcio Teixeira	9f0e1834ec	Followup to #13039 (#13163) ... - Fix compile error when accessing `process_subcommands_now_P`. - Use `const` var eliminating double-negative (to make code more understandable).	2019-02-13 20:39:38 -06:00
Ludy	1ace97e946	[2.0.x] Update German language (#13150)	2019-02-13 20:31:50 -06:00
Scott Lahteine	7cf9b93f26	Add HAS_FILAMENT_SENSOR ahead of 12962	2019-02-12 20:13:20 -06:00
Giuliano Zaro	2c8d12d3ec	Update Italian language (#13148)	2019-02-12 18:40:34 -06:00
Scott Lahteine	c2b90c44e4	Prettify some code comments	2019-02-12 17:43:37 -06:00
Scott Lahteine	a0dadc8c62	Smaller I2CPositionEncoder strings	2019-02-12 16:21:56 -06:00
Scott Lahteine	18996d2595	Fix some spelling	2019-02-12 16:21:56 -06:00
revilor	e56c13670d	Service interval watchdog (#13105)	2019-02-12 15:58:56 -06:00
InsanityAutomation	7f1b69b0c8	Add HOST_PROMPT_SUPPORT (#13039)	2019-02-12 15:55:47 -06:00
Scott Lahteine	0feeef2604	Update copyright in headers	2019-02-12 15:30:11 -06:00
Scott Lahteine	894f5c24a8	Fix trailing whitespace	2019-02-12 14:25:57 -06:00
Roman Moravčík	bace52afd7	Fixed compilation with MMU2_MENUS disabled (#13140)	2019-02-12 12:55:49 -06:00
Ludy	584f9cd449	Update German language (#13137)	2019-02-12 12:54:57 -06:00