LineF
d777cef837
fixed minimum macro ( #11986 )
2018-10-02 21:35:34 -05:00
Scott Lahteine
e3f7b69105
Add PROBING_STEPPERS_OFF ( #11984 )
...
Co-Authored-By: houseofbugs <houseofbugs@gmail.com>
2018-10-02 05:13:58 -05:00
Scott Lahteine
0e5bcdf695
Make DISABLE_INACTIVE_EXTRUDER a simple switch
2018-10-02 04:57:03 -05:00
Scott Lahteine
0dedb3e139
Reorganize some core headers ( #11983 )
2018-10-02 04:25:46 -05:00
Thomas Moore
ab4549d2bc
[2.0.x] Add simultaneous retraction for mixing extruder ( #11941 )
2018-10-01 23:32:02 -05:00
Scott Lahteine
c75f5a376b
Tweak some comments
2018-10-01 18:34:14 -05:00
Scott Lahteine
f4c625d3a1
Ensure MIN/MAX overrides
2018-10-01 05:32:55 -05:00
Scott Lahteine
3019713402
Reorganize some enums
2018-10-01 05:32:55 -05:00
Scott Lahteine
606a4362b3
Reduce STM32F4 compile warnings
2018-10-01 04:41:17 -05:00
Scott Lahteine
b3154b2120
Apply MOVE_Z_WHEN_IDLE to example configurations
...
Co-Authored-By: dot-bob <gibben@gmail.com>
2018-10-01 01:41:11 -05:00
dot-bob
b0fd8f2d74
Add option to move Z on double-click when idle
2018-10-01 01:41:11 -05:00
Scott Lahteine
389376c40e
Clean up softspi.h
2018-10-01 01:29:48 -05:00
Scott Lahteine
e78bdd654d
Clean up BABYSTEP options
2018-10-01 01:29:21 -05:00
InsanityAutomation
8ae113ff36
Show zprobe_zoffset when BABYSTEP_HOTEND_Z_OFFSET is disabled ( #11973 )
2018-10-01 00:30:10 -05:00
InsanityAutomation
2e98437392
Clean up main menu ( #11972 )
2018-10-01 00:15:06 -05:00
InsanityAutomation
6d862b2916
Home before level corners, if needed ( #11976 )
...
…and add a consistent homing screen for all LCD pre-homing.
2018-10-01 00:14:28 -05:00
Scott Lahteine
11ac75edcb
Use PGM_P for PSTR pointers ( #11977 )
2018-09-30 23:44:33 -05:00
InsanityAutomation
4d5566a6b7
Add filament runout sensor menu item ( #11971 )
2018-09-30 21:33:46 -05:00
Scott Lahteine
8489673cea
Adjust some HAL formatting
2018-09-30 21:24:37 -05:00
Scott Lahteine
fb8a07660a
Followup to minmax patch
...
Co-Authored-By: Palatis <palatis@gmail.com>
2018-09-30 21:17:31 -05:00
Scott Lahteine
3c40933713
Remove trailing spaces, old comment
2018-09-30 20:47:06 -05:00
Hannes Brandstätter-Müller
a3ec805c97
Anycubic Kossel Linear+: corrected DELTA_DIAGONAL_ROD ( #11964 )
2018-09-30 05:41:26 -05:00
AnoNymous
b30ca652ae
Replace MIN# / MAX# with variadic MIN / MAX ( #11960 )
2018-09-30 04:59:14 -05:00
Scott Lahteine
e10f730478
Tweak vector_3::apply_rotation
2018-09-30 01:51:33 -05:00
Scott Lahteine
e2ab78d876
Fix SERIAL_PORT_2 sanity check
2018-09-30 00:24:10 -05:00
AnoNymous
a644d8cb93
Avoid copies in vector and matrix ( #11959 )
2018-09-29 23:04:40 -05:00
Scott Lahteine
693865a649
Fix some whitespace
2018-09-29 22:36:36 -05:00
Scott Lahteine
9903305dda
Merge pull request #9582 from tcm0116/2.0.x-sensorless_probing
...
[2.0.x] Add TMC2130 sensorless probing
2018-09-29 21:02:22 -05:00
Scott Lahteine
14df753086
Correction for block->mix_steps
...
Fix #11484
2018-09-29 19:13:17 -05:00
Alexander Amelkin
2ecfda80ac
Improve support for JTAG/SWD pins reuse ( #11963 )
...
STM32 can reuse JTAG and SWD pins separately. Add `DISABLE_DEBUG` option to disable both interfaces and retain `DISABLE_JTAG` to disable JTAG only.
2018-09-29 19:00:49 -05:00
Scott Lahteine
bb47009656
Apply sensorless changes to example configs
2018-09-29 18:54:14 -05:00
Thomas Moore
3286325044
Add TMC2130 sensorless probing
2018-09-29 18:54:14 -05:00
Scott Lahteine
7d5c336c56
Corrections for dylsexic TMC
2018-09-29 18:51:11 -05:00
Scott Lahteine
d89d8fe852
Fix Busy State in temperature.cpp
...
Fix #11954
2018-09-29 17:03:35 -05:00
Giuliano Zaro
70e7a465d8
[2.0.x] Fix compile error ( #11951 )
...
Fix compile error intruduced with M109 modification
2018-09-29 13:48:23 -05:00
Hannes Brandstätter-Müller
935b120949
Anycubic Kossel: probe closer to the edge ( #11950 )
2018-09-29 02:26:16 -05:00
Scott Lahteine
1410e79e7f
Ensure M109 handles autotemp
2018-09-29 02:12:06 -05:00
Scott Lahteine
e4389f7d23
Standard methods to wait for heating ( #11949 )
2018-09-29 01:44:47 -05:00
Scott Lahteine
bdc9889d3a
Fix a sanity check
2018-09-29 00:24:25 -05:00
Scott Lahteine
321f9140d1
Followup to #11904
2018-09-28 20:04:40 -05:00
InsanityAutomation
23114aeb81
Fix garbled M119 output. Honor NUM_RUNOUT_SENSORS ( #11948 )
2018-09-28 19:00:11 -05:00
Scott Lahteine
1667ed9d1c
Pause should use ECHOLNPGM
2018-09-28 18:15:38 -05:00
Victor Tseng
93839e2f73
Add option to enable/disable autoretract altogether ( #11904 )
2018-09-28 16:52:56 -05:00
Scott Lahteine
ad21a4f07b
Tweaks to HAL format and order
2018-09-28 15:59:50 -05:00
Scott Lahteine
b682a1961a
Tweak STM32F7 TMC2660 class
2018-09-27 21:13:15 -05:00
Scott Lahteine
a0a3b23e35
Reduce Raptor bootscreen by 144 bytes
2018-09-27 18:24:40 -05:00
InsanityAutomation
95d793456b
Add Formbot Raptor config, fix other Formbot configs ( #11926 )
2018-09-27 19:20:43 -04:00
Mitch Roote
d016b572e3
[2.0.x] Add pin configuration for Fysetc F6 ( #11932 )
2018-09-27 19:20:19 -04:00
Alexander Amelkin
84926b1d5a
HAL general support for DISABLE_JTAG option ( #11211 )
...
Some STM32-based boards may use multiplexed JTAG pins as IO. Up to now the `DISABLE_JTAG` option (defined in pins files) was only supported for AT90-based boards. This commit generalizes the code and adds support for boards based on STM32F1 and STM32F4.
2018-09-27 19:02:50 -04:00
Scott Lahteine
c575c5d5f6
Bring example configs up to date ( #11939 )
2018-09-27 18:47:26 -04:00
Scott Lahteine
6b1a4f30a8
Fix case of T-Rex 3 _Statusscreen.h
2018-09-27 17:00:55 -05:00
Scott Lahteine
ab7bfa86e2
Fix case of T-Rex-3 _Statusscreen.h
2018-09-27 17:00:55 -05:00
Scott Lahteine
241168926d
Update some configs
2018-09-27 16:42:59 -05:00
Scott Lahteine
cb6454118c
Workaround for Pronterface M29
2018-09-27 16:27:02 -05:00
Victor Tseng
eeab4141db
[2.0.x] Anycubic Trigorilla 14 pins tweak ( #11869 )
2018-09-27 16:06:21 -04:00
InsanityAutomation
cb9dc56630
Add GT2560 v3 support ( #11914 )
2018-09-27 15:13:15 -04:00
InsanityAutomation
f2e630a05e
Stow probe on probing failed ( #11936 )
...
Prevents probe from being left down should probing fail and print job continue
2018-09-27 13:26:14 -04:00
Hannes Brandstätter-Müller
0b602ae101
[2.0.x] Fix Anycubic Kossel with Probe V1, stuck LCD message after stow ( #11929 )
2018-09-27 13:23:53 -04:00
Giuliano Zaro
dc11131656
[2.0.x] fix possible race condition ( #11923 )
...
Fix some commits done in #11900
2018-09-25 13:56:57 -04:00
Scott Lahteine
d6b9327c11
Followup for Endstop Noise Threshold
...
Followup to #11912
2018-09-25 13:50:49 -04:00
Scott Lahteine
aa6e8e9325
Tweak some config comments
2018-09-25 13:42:28 -04:00
Scott Lahteine
5490a664f5
Expose: Homing Validation and Endstop Noise Threshold ( #11912 )
2018-09-24 21:59:12 -04:00
Scott Lahteine
cee34f7290
Followup for BABYSTEP_HOTEND_Z_OFFSET ( #11916 )
2018-09-24 21:46:56 -04:00
teemuatlut
884ad75cb8
Update config files
2018-09-24 17:26:18 -04:00
Giuliano Zaro
18e456d38d
[2.0.x] fix home endstop bug (DON'T MERGE, needs discussion) ( #11900 )
2018-09-24 16:56:01 -04:00
Scott Lahteine
6742026568
Followup for 6 extruders
2018-09-24 14:36:50 -04:00
Scott Lahteine
04bdff4115
Add a blank line
2018-09-24 12:49:02 -04:00
Marcio Teixeira
ccbd045f02
Fixed warning about comparing signed to unsigned ( #11909 )
2018-09-24 12:03:29 -04:00
InsanityAutomation
1104054d73
2.0 IDEX Independent z offset and other fixes ( #11862 )
...
* Add Formbot Raptor board
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
* Add a second Z probe Z offset
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
* Modify method to utilize live adjustment of hotend z offset
Should probably move config option to babystepping and rename as it may now apply to all multiextruder systems
* Move config item and catchup other code to current method
2018-09-24 09:40:48 -05:00
Scott Lahteine
217e0efd20
General option PAUSE_BEFORE_DEPLOY_STOW ( #11905 )
2018-09-24 00:43:43 -04:00
Scott Lahteine
849dea92a8
Move probe extras below probe types
2018-09-23 23:23:07 -04:00
Scott Lahteine
a2b0260f0f
Update Sublime files
2018-09-23 19:59:08 -04:00
Hannes Brandstätter-Müller
a4cdffdd69
Support for manually deployed fixed probes ( #11899 )
2018-09-23 19:59:08 -04:00
Scott Lahteine
ddcbf80f23
Followup for Z_TRIPLE_ENDSTOPS
2018-09-23 12:22:31 -04:00
Marcio Teixeira
c411e7eb0d
[2.0.x] Squelch compiler warnings seen with -Wall ( #11889 )
2018-09-23 12:00:34 -04:00
Roxy-3D
83105590a0
Better default values for Mesh Inset
2018-09-22 03:25:18 -04:00
Roxy-3D
4163c1a514
Fix end stop and Z-probe reporting logic
2018-09-22 03:25:18 -04:00
Scott Lahteine
ea9eb2fc8f
Fix servo angles in config-store
2018-09-21 15:41:36 -04:00
Roxy-3D
d3d6be8210
Add MAX7219 reverse units option ( #11860 )
2018-09-19 18:54:51 -05:00
Scott Lahteine
beab9733f8
Remove extra clauses in config-store
2018-09-19 17:06:51 -05:00
Scott Lahteine
5a74b12b45
Followup to #11769
2018-09-19 16:40:32 -05:00
InsanityAutomation
f38570ac55
Add custom user menu title ( #11769 )
2018-09-19 15:04:34 -05:00
Scott Lahteine
17494099a9
Fix parking_extruder_tool_change
...
Fix #11872
2018-09-19 03:02:07 -05:00
Scott Alfter
140caf99b8
E0_CS_PIN moved from A13 to A15 on RAMPS-FD v2.2 ( #11865 )
2018-09-18 22:24:20 -05:00
Scott Lahteine
10590c2f80
Fix some fan conditionals
2018-09-18 21:23:33 -05:00
Scott Lahteine
e4ee607fc8
Fix Dual X FRS in M600
...
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
2018-09-18 21:23:33 -05:00
Scott Lahteine
bae8f82ba8
[2.0] Fix Mixing Extruder mixing factors ( #11861 )
2018-09-18 01:10:41 -05:00
Scott Lahteine
c5e5cc5e9f
Fix some trailing whitespace, macros
2018-09-17 17:30:04 -05:00
AnHardt
54bd124665
2.0.x: Fix normalize_mix() ( #11856 )
...
Mix factors needed to be updated consistent with the recent Stepper/Planner code refactor.
2018-09-17 16:37:38 -05:00
Roxy-3D
5fbfbde532
Fix example file to pull in correct pins file
2018-09-17 10:41:30 -05:00
Roxy-3D
378f354939
IDEX Scaled Duplication is still under development
...
Take it out of the menu until it is tested and working.
2018-09-17 10:26:44 -05:00
Scott Lahteine
65045ba54b
tmc_util fix part 2
...
Followup to 115abf9
2018-09-17 05:36:17 -05:00
Scott Lahteine
09a2bee8aa
Support more filament runout sensors in M119 ( #11851 )
2018-09-17 03:27:13 -05:00
Scott Lahteine
115abf9c53
Fix syntax error in front of tmc_axes
2018-09-17 01:10:20 -05:00
Roxy-3D
0780913848
IDEX Improvements ( #11848 )
2018-09-17 01:06:22 -05:00
Scott Lahteine
39732838b4
Tweak indent of Chinese languages
2018-09-17 00:58:32 -05:00
Scott Lahteine
53bd0b55cb
Followup for 6 extruders
2018-09-16 23:57:50 -05:00
Scott Lahteine
1718eff54a
Code changes supporting up to 6 extruders
2018-09-16 22:32:53 -05:00
Scott Lahteine
f5c210d33d
Config changes supporting up to 6 extruders
2018-09-16 22:22:35 -05:00
Scott Lahteine
d948c6e867
RADDS Extension Board V3 support
2018-09-16 22:22:35 -05:00
Thomas Moore
c437bb08f1
Overhaul of the planner ( #11578 )
...
- Move FWRETRACT to the planner
- Combine leveling, skew, etc. in a single modifier method
- Have kinematic and non-kinematic moves call one planner method
2018-09-16 21:24:15 -05:00
Scott Lahteine
8323a08642
Clean up some whitespace
2018-09-16 19:44:21 -05:00
Scott Lahteine
6286afd456
Add Triple-Z options to example configs
2018-09-16 00:35:58 -05:00
Holger Müller
1a6f2b29b8
Add support for Triple-Z steppers/endstops
2018-09-16 00:35:58 -05:00
Hannes Brandstätter-Müller
bc06406d7d
Fix Anycubic Kossel config (probe crash) ( #11832 )
2018-09-15 23:27:21 -05:00
Scott Lahteine
66f83d33e6
Fix some config comments
2018-09-15 23:21:55 -05:00
Hannes Brandstätter-Müller
84ed9b5a63
Send "G33 S P1" for Delta Height Calibration ( #11831 )
2018-09-15 20:17:35 -05:00
Scott Lahteine
215eee4fe5
Use 'friend' to access set_directions
2018-09-15 20:11:10 -05:00
Cassiano Leal
ff51e7322d
Fix for Stepper::set_directions() compilation error ( #11838 )
2018-09-15 19:31:51 -05:00
Scott Lahteine
809b232fa2
Fix stepper directions after M501/M502
...
See https://github.com/MarlinFirmware/Marlin/issues/11103#issuecomment-421387611
Co-Authored-By: tcm0116 <tcm0116@users.noreply.github.com>
2018-09-14 20:00:55 -05:00
Scott Lahteine
f79a5a9dee
Tweak spacing of L6470 options
2018-09-12 23:18:11 -05:00
Hannes Brandstätter-Müller
c37d3ae97d
[2.0.x] Fix NOZZLE_PARK_FEATURE for Anycubic Kossel ( #11812 )
2018-09-12 15:37:38 -05:00
HenningJW
4fb2134f00
Fix non-sensical values for Zonestar themistor table ( #11817 )
...
Values taken from Zonestar firmware for P802QA with a Melzi board. Timestamps from the firmware package are from April 2016.
2018-09-12 15:36:04 -05:00
Scott Lahteine
b220a825a7
Fix raw_filwidth_value error
2018-09-12 04:31:55 -05:00
Scott Lahteine
1933d5d6fb
Fix SD autostart with no LCD
2018-09-12 03:49:59 -05:00
Roman Moravčík
8bce5370c7
Updated slovak translation ( #11807 )
2018-09-12 03:29:17 -05:00
Giuliano Zaro
64d629ba2a
[2.0.x] Italian language fix ( #11796 )
2018-09-12 03:28:22 -05:00
Scott Lahteine
8584d3697d
Fix servo count define conflict
...
`MAX_SERVOS` => `NUM_SERVO_PLUGS`
2018-09-11 16:20:31 -05:00
Scott Lahteine
06949ae510
Fix MSG_FILAMENT_CHANGE_HEAT_1 for small LCD
2018-09-10 23:21:37 -05:00
Scott Lahteine
d882717d98
Save some PROGMEM with constexpr ( #11798 )
...
When possible, make `active_extruder` a `constexpr` to save some PROGMEM.
2018-09-10 23:09:26 -05:00
Sam Lane
4f883d5971
[2.0.x] Extruder-Distinct Linear Advance K Factors ( #11789 )
2018-09-10 22:37:32 -05:00
Scott Lahteine
fe9f088d60
[2.0.x] Anycubic LinearPlus, Trigorilla 1.4 ( #11730 )
2018-09-10 21:25:40 -05:00
Scott Lahteine
b6aae2b322
Tweak RAMPS_FD_V1 pins
2018-09-10 15:43:03 -05:00
Scott Lahteine
7391e23332
Fix RigidBoard FAN_PIN collision
2018-09-10 05:29:00 -05:00
Scott Lahteine
53b8c3bd66
Add EXTERNAL_CLOSED_LOOP_CONTROLLER to examples
2018-09-10 03:17:17 -05:00
Sam Lane
1b6bc19427
Add external closed loop controller support
2018-09-10 03:17:17 -05:00
Marcio Teixeira
2ebfe90be9
Add custom preheat temp to filament change ( #11475 )
2018-09-10 02:51:46 -05:00
Karl Andersson
69d0ed5791
[2.0.x] Fix ambiguous function call (SERIAL_PROTOCOL_F) when using Arduino_Core_STM32 ( #11747 )
2018-09-10 02:36:06 -05:00
Scott Lahteine
d32c4efc77
Fix some trailing whitespace
2018-09-10 01:26:20 -05:00
Alexander Amelkin
bc1ba998b2
[2.0.x] Fix undefined symbol 'g29_in_progress' ( #11781 )
2018-09-09 22:06:03 -05:00
InsanityAutomation
bad225dc04
Fix mesh leveling compile errors ( #11768 )
2018-09-09 04:19:48 -05:00
Sam Lane
d783400330
Updates to STM32F7 HAL, for completeness ( #11770 )
2018-09-09 03:26:15 -05:00
Scott Lahteine
72af8e0f02
Patch extruder_advance_K edit menu
...
Fix #11776
2018-09-09 03:21:08 -05:00
Sebastianv650
7e8c073fba
Fix extruder stops extruding with LA ( #11758 )
2018-09-09 00:04:14 -05:00
Scott Lahteine
0c01099f17
hop_amount => current_hop
2018-09-08 21:20:37 -05:00
Scott Lahteine
eafd62308e
Use TMC2208Stepper v0.2.5 ( #11714 )
2018-09-08 20:41:21 -05:00
Kevin
e25d2ae4a2
[2.0.x] SWITCHING_TOOLHEAD ( #11623 )
2018-09-08 01:43:24 -05:00
Alexander Amelkin
f417408df1
[STM32F1] Fix HAL for new PlatformIO ( #11749 )
2018-09-07 18:15:32 -05:00
Roxy-3D
3d7f2c1fde
Fix directory name to be consistent ( #11745 )
2018-09-06 14:10:40 -05:00
Roxy-3D
a9c98a0e47
Create _Bootscreen.h
2018-09-06 10:24:03 -05:00
Roxy-3D
9f85d3a9cb
Create _statusscreen.h
2018-09-06 10:23:20 -05:00
Roxy-3D
e2e7b1d705
Break out support of the T-Rex 3
2018-09-06 10:20:20 -05:00
Roxy-3D
67996c2b66
Break out support for the T-Rex 3
2018-09-06 10:19:05 -05:00
Roxy-3D
9c8d9d282f
Break out support for Formbot T-Rex3 from previous versions
2018-09-06 09:49:04 -05:00
Roxy-3D
e3aac59637
Create pins_FORMBOT_TREX3.h
2018-09-06 09:46:23 -05:00
Roxy-3D
f580247581
Create pins_FORMBOT_TREX2.h
2018-09-06 09:45:29 -05:00
Roxy-3D
073857646b
seperate the T-Rex2 and T-Rex3 support
2018-09-06 09:43:43 -05:00
Roxy-3D
fe4fc2883b
Add support for Formbot T-Rex3
2018-09-06 09:41:59 -05:00
Scott Lahteine
2a61c9a939
Various fixups to configs, spacing, etc.
2018-09-06 06:44:31 -05:00
Scott Lahteine
b3efbc6e6e
Add MANUAL_E_MOVES_RELATIVE to more configs
2018-09-06 02:09:14 -05:00
Scott Lahteine
679e4602fe
Add MANUAL_E_MOVES_RELATIVE to examples
2018-09-06 02:00:25 -05:00
Marcio Teixeira
beb51c2d58
Show manual extrusion moves as relative in LCD
...
- Implements FR#11724
- Old behavior can be restored by commenting out MANUAL_E_MOVES_RELATIVE
2018-09-06 02:00:25 -05:00
Scott Lahteine
d10f29ae2e
Pass segment length in G2-G3
2018-09-06 01:43:27 -05:00
Scott Lahteine
dcfde2317f
Pass segment length in prepare_kinematic_move_to ( #11737 )
2018-09-06 01:40:22 -05:00
Roxy-3D
d5379ee9d6
Fix search for white space in enqueued commands
2018-09-05 16:57:08 -05:00
Roxy-3D
8d5bea073b
Assume one Max7219 unit if not specified
2018-09-05 14:18:13 -05:00
Roxy-3D
9651ceb36b
Correct spelling of #endif
2018-09-05 10:46:08 -05:00
Scott Lahteine
b213a89ef5
Sanity-check NOZZLE_PARK_POINT
2018-09-05 06:18:08 -05:00
Scott Lahteine
86ee74731e
Comment for RADDS + RRDFGSC
2018-09-05 05:45:17 -05:00
Kevin
ae1271b2ae
RADDS: Update Full Graphic Display Pins ( #11731 )
2018-09-05 03:51:54 -05:00
Scott Lahteine
650d4313c4
Bring some configs up to date
2018-09-05 03:49:24 -05:00
AnHardt
530a13ab6c
[2.0.x] SECURITYFIX missing max temp error when PID is used ( #11717 )
2018-09-05 01:41:45 -05:00
Scott Lahteine
12fded46c2
Correct some FR strings
...
Co-Authored-By: pipersw <pipersw@users.noreply.github.com>
2018-09-04 04:00:22 -05:00
Michael Triffon
aefc2f7cf9
Add Anet A2 and A2 Plus Configurations ( #11677 )
2018-09-03 23:38:51 -05:00
scott0122
72fdb6bab3
Fix SWITCHING_NOZZLE zdiff ( #11683 )
2018-09-03 23:24:40 -05:00
Scott Lahteine
8b837dc3ad
No need for last \n in G-code items
2018-09-03 23:23:20 -05:00
Scott Lahteine
d1ceaf5550
[2.0.x] Followup to IDEX changes ( #11707 )
2018-09-03 23:15:31 -05:00
Roxy-3D
d62f4df0b7
Disable LCD Pins used by new Max7219 hook up if in that mode
2018-09-03 09:56:25 -05:00
Roxy-3D
fa772c31bf
Provide more options for Max7219 connection on Formbot
2018-09-03 09:52:36 -05:00
Scott Lahteine
8e18e48d49
Merge pull request #11610 from Freeviv/bugfix-2.0.x
...
[2.0.x] Editable servo angles
2018-09-03 03:55:38 -05:00
Giuliano Zaro
59e76e5fdf
[2.0.x] Fix planner computation ( #11708 )
...
Fix #11697
2018-09-03 00:29:29 -05:00
Roxy-3D
7680b64aa6
IDEX clean up ( #11690 )
2018-09-02 10:18:59 -05:00
teemuatlut
49e107cea9
Restrict SW serial to AVR ( #11696 )
2018-09-01 15:24:44 -05:00
Scott Lahteine
18f1af2dca
Fix up Teensy tests, servo sanity
2018-09-01 01:10:20 -05:00
Scott Lahteine
74a04aed55
Fix compile error with NO_LCD_MENUS
2018-08-31 19:16:04 -05:00
Scott Lahteine
509e1cf2bd
Add *_DRIVER_TYPE to remaining configs
2018-08-31 19:07:17 -05:00
Scott Lahteine
d55f44edba
Printcounter improvements ( #11689 )
2018-08-31 17:40:39 -05:00
Scott Lahteine
6a3207391f
Remove obsolete HAL_timer_restrain
2018-08-31 16:17:22 -05:00
Scott Lahteine
e3fc9aa35f
Update some config comments
2018-08-31 16:03:44 -05:00
Scott Lahteine
136860e8bb
Sanity-check SERVO pin for servo probes
2018-08-31 15:47:47 -05:00
Roman Moravčík
66de50f5f8
Updated slovak translation ( #11684 )
2018-08-31 15:37:49 -05:00
scott0122
ada85d5585
Improve HOTEND OFFSET Z display precision to 3 ( #11686 )
2018-08-31 15:15:40 -05:00
scott0122
607c1e58d9
Improve HOTEND OFFSET Z display precision to 3 ( #11685 )
2018-08-31 15:14:33 -05:00
Scott Lahteine
3e81745e81
Fix issues, make optional
2018-08-29 17:58:02 -05:00
Jan
aa80e448e2
Store servo angles in EEPROM
2018-08-29 17:58:02 -05:00
Scott Lahteine
9953213513
Add EDITABLE_SERVO_ANGLES to example configs
2018-08-29 17:57:52 -05:00
Marcio Teixeira
0966bdcbc4
Reorganized ultralcd menu (10317) ( #10360 )
...
Replaced "Prepare" and "Control" menus with "Movement", "Temperature", "Configuration" and "Advanced Settings"
2018-08-29 16:51:14 -05:00
Scott Lahteine
e40a3eef04
Support for Anet A2 Plus
2018-08-29 03:39:43 -05:00
Scott Lahteine
32e38fee74
Update Controller Fan for Y2,Z2
2018-08-29 01:49:48 -05:00
Jeonghwan Roh
59cf217e77
Fix 5 mixing steppers
2018-08-29 01:49:48 -05:00
Scott Lahteine
2a2e8c314e
Suppress emergency parser G-code errors
...
Co-Authored-By: srieche <srieche@users.noreply.github.com>
2018-08-29 01:04:55 -05:00
Ilya Bukhonin
7ecb8b4af5
[2.0.x] Teensy 3.1 and 3.2 support ( #11460 )
2018-08-27 21:49:49 -05:00
Pablo Crespo
409a0632af
[2.0.x] Add Morpheus Board support ( #11651 )
2018-08-27 21:28:03 -05:00
Marcio Teixeira
0f14977b5d
LIGHTWEIGHT_UI: Allow feedrate % to exceed 255% ( #11656 )
...
- Changed type of integer used for feedrate percentage from uint8_t to uint16_t.
2018-08-27 21:26:32 -05:00
scott0122
6dc9553aa5
Fix SWITCHING_NOZZLE compile error ( #11657 )
2018-08-27 21:25:25 -05:00
Scott Lahteine
a15e570d3b
Fix SD progress with Lite Status Screen
...
Co-Authored-By: Lê Hoàng <icy.lord.love.angel@gmail.com>
2018-08-26 17:12:05 -05:00
Scott Lahteine
66966dbd69
Tweak comments for newer multiplexer
2018-08-25 17:00:49 -05:00
Scott Lahteine
933d833ec8
Tweak some Anet A6 comments
2018-08-24 21:50:53 -05:00
Scott Lahteine
d1c9517903
Followup to hotend_offset[Z] patch
2018-08-24 21:32:00 -05:00
Scott Lahteine
e2b8fc4f17
Reduce some debug strings
2018-08-24 21:11:39 -05:00
Chris Pepper
b71c2b8651
[2.0.x] Update LPC176x tests, fix clean script ( #11617 )
2018-08-24 18:53:24 -05:00
Scott Lahteine
a317bb4991
Remove stray tab
2018-08-24 17:35:13 -05:00
Scott Lahteine
acf5ae3083
!ENABLED => DISABLED
2018-08-24 16:36:37 -05:00
Scott Lahteine
ba1919c1eb
HAL tweaks to LPC1768 main
2018-08-22 17:16:18 -05:00
Scott Lahteine
0987ed2a18
Use American English
2018-08-22 17:16:18 -05:00
Kevin
6483285bc5
HOTEND_OFFSET_Z always available ( #11603 )
2018-08-22 00:21:29 -05:00
Michael Triffon
f8c52c9c29
Azteeg X5 Mini WiFi support ( #11601 )
2018-08-21 23:58:26 -05:00
jneilliii
3671c63cde
Einsy Full Graphic LCD Fix ( #11604 )
...
Fixed issue with LCD timings for Einsy RAMBo board.
2018-08-21 23:43:52 -05:00
Colin Gilgenbach
593d5375ea
Fix G28 resetting DUAL_NOZZLE_DUPLICATION_MODE ( #11605 )
...
There's no reason for G28 to reset DUAL_NOZZLE_DUPLICATION_MODE, because it only affects the E stepper, unlike DUAL_X_CARRIAGE which affects the X steppers as well.
2018-08-21 23:42:55 -05:00
Scott Lahteine
f0dbe61692
Tweaks to motion.h reachable tests
2018-08-21 23:34:29 -05:00
Scott Lahteine
2d3317a35b
Prettify Dual X Carriage description
2018-08-21 23:34:29 -05:00
Roxy-3D
cd9868f442
Make position_is_reachable() smarter about IDEX machines`
...
On many IDEX machines the allowed travel of the X1 carraige and X2 carraige does not perfectly overlap.
This helps the issue. But more work needs to be done at the higher level. (For example the X1_MAX_POS should probably be factored into G26's mesh validation pattern.)
2018-08-21 19:12:26 -05:00
Scott Lahteine
97f6396b25
Fix RE_ARM LCD pins to avoid #undef
2018-08-21 12:47:40 -05:00
Scott Lahteine
0e25f66c09
Fix Ultimaker servo pin
...
As pointed out at https://github.com/MarlinFirmware/Marlin/issues/7981#issuecomment-407116642
2018-08-21 11:39:53 -05:00
Scott Lahteine
ad12b9b46b
Fix indentation, whitespace, spelling, formbot pins...
2018-08-21 09:47:57 -05:00
Scott Alfter
b5537dde7f
need to add E2END to pins_RAMPS_FD_V2.h ( #11564 )
2018-08-21 02:16:31 -05:00
Scott Lahteine
8f0bbdcc9b
Fix up Max7219 orientations ( #11596 )
2018-08-21 02:06:18 -05:00
jmz52
a77f8c6dd5
Implement servo support for STM32F1 ( #11580 )
...
Implement servo support for STM32F1. Original code was incomplete and depended on Servo library from stm32duino which conflicts with `module/servo.h`.
2018-08-20 21:13:51 -05:00
Dave Johnson
0456caf0ad
Consolidate shared HALs and isolate HAL compile ( #11552 )
2018-08-20 21:11:12 -05:00
jmz52
dfe18ac633
Fix compilation error for STM32F1 with U8GLIB_SSD1306 or U8GLIB_SH1106 enabled ( #11583 )
...
The `binary.h` file required by `lcd/dogm/dogm_bitmaps.h` is not present in stm32duino environment. Binary macros are defined in `bit_constants.h` in stm32duino framework.
2018-08-20 20:37:56 -05:00
Roxy-3D
b0a8ce59bd
Update Boards.h to include Formbot support
2018-08-20 16:46:27 -05:00
Roxy-3D
62ce937540
Update pins.h to include the Formbot board
2018-08-20 16:44:54 -05:00
Roxy-3D
a82be36d5d
Create pins_FORMBOT.h
2018-08-20 16:43:42 -05:00
ghent360
00d24a8219
Don't call __delay_4cycles for 0 cycle delay - takes a really long time. ( #11586 )
2018-08-18 22:50:11 -05:00
Scott Lahteine
56f1e17a25
[2.0.x] Max7219 cleanup, simplify, and extend ( #11575 )
2018-08-18 01:33:13 -05:00
jmz52
0b2d686160
Fix "SD init fail" problem for STM32F1 ( #11579 )
...
Fix "SD init fail" problem for STM32F1 caused by incorrect SS pin state and incorrect SPI mode. Issue #11225
2018-08-17 23:27:10 -05:00
Kevin
db30650731
Fix UBL/Homing ( #11566 )
2018-08-16 08:28:40 -05:00
Roxy-3D
aae4c67e5d
Max7219 Clean Up ( #11563 )
...
Some of the Rotations did not do the right thing with setting and clearing pixels.
I think it is correct now. But if not... It is much closer to being correct.
2018-08-15 21:22:28 -05:00
InsanityAutomation
9de730b2bf
Update tool_change.cpp ( #11559 )
2018-08-15 19:30:52 -05:00
InsanityAutomation
c2553f9888
2.0.x - Idex match119 ( #11556 )
...
* Update ubl_G29.cpp
* Update ultralcd.cpp
2018-08-15 13:26:11 -05:00
Roxy-3D
e9de321ac0
declare void Max7219_register_setup();
2018-08-15 10:36:51 -05:00
Scott Lahteine
952a1bc9d5
Merge pull request #11551 from thinkyhead/bf2_trinamic_fixes
...
[2.0.x] Fix TMC2208 SW serial communication
2018-08-14 19:07:08 -05:00
petrzjunior
67613bf5bd
Update Czech translations ( #11510 )
2018-08-14 18:45:16 -05:00
Scott Lahteine
bd6d032628
Update default driver configuration
...
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
2018-08-14 18:42:04 -05:00
Scott Lahteine
1561e61df7
New TMC2208 constructor
...
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
2018-08-14 18:41:51 -05:00
Nils Hasenbanck
b37bfeffeb
[2.0.x] Use the new const functions of the persistentStore api ( #11544 )
2018-08-14 18:35:36 -05:00
Chris Pepper
5573ef62c6
[2.0.x] PersistentStore update followup ( #11549 )
2018-08-14 17:54:12 -05:00
Scott Lahteine
846bd24eb9
MALYAN_LCD is ok without SD
2018-08-14 05:31:47 -05:00
Scott Lahteine
834ea7fcea
Remove 'const' from PersistentStore::capacity
2018-08-14 04:46:10 -05:00
Dave Johnson
c64199941e
Compile only selected PIO environment ( #11519 )
2018-08-14 03:28:52 -05:00
Andy Shaw
5be2559eda
Use flash memory to emulate EEPROM ( #11500 )
...
Use a sector of the LPC flash memory to emulate EEPROM storage, removing the need to have an SD card to store system parameters.
2018-08-14 01:19:34 -05:00
Scott Lahteine
6964e1a95a
Clean up trailing whitespace
2018-08-14 00:55:37 -05:00
Scott Lahteine
865ee5985f
Followup persistent store with heading, const
2018-08-13 23:55:33 -05:00
Scott Lahteine
a4b0148365
Easier to find 'static inline'
2018-08-13 23:55:33 -05:00
Scott Lahteine
cc0a60453f
Merge pull request #11526 from hasenbanck/eeprom-cleanup
...
[2.0.x] Change direct eeprom access to HAL::PersistentStore
2018-08-13 19:45:10 -05:00
Roxy-3D
65c5227c29
Change M7219 I to setup Max7219 registers, but not do initialization pattern
2018-08-13 17:46:48 -05:00
Nils Hasenbanck
577aeb4aa9
All EEPROM access uses persistentStore
2018-08-13 17:43:35 -05:00
Scott Lahteine
6a8b906318
Followup for persistent_store_api.h
2018-08-13 17:43:35 -05:00
Chris Pepper
66d2b48b59
Update PersistentStore api ( #11538 )
...
- Clean up the API to use a `static` class instance to adhere to Marlin convention
- Add `const` position data access for read/write
- Add Storage capacity to the interface
2018-08-13 17:30:25 -05:00
Roxy-3D
60f1376798
Make M7219 I more robust and nice to look at
...
Make M2719 initialize the Max7219 registers and then run the initialization pattern (if one is specified).
2018-08-13 16:59:25 -05:00
Roxy-3D
fd15b1495a
add I parameter to M42 to allow access to sensitive pins
2018-08-13 16:57:09 -05:00
Scott Lahteine
11b411a872
Improve AXIS_DRIVER_TYPE macros
2018-08-13 16:57:09 -05:00
Scott Lahteine
f1347f783d
Optimize thermistor table 71
...
agData in Table 71 is extremely oversampled (see Issue #11220 ). I have removed the data points that perform *worse* than linearly interpolating the remaining points, and fixed up two points that were simply rounded incorrectly.
Co-Authored-By: Aaron Griffith <aargri@gmail.com>
2018-08-13 02:54:55 -05:00
Scott Lahteine
0bda22367b
Allow Einsy RAMBo FAN1_PIN override
2018-08-13 02:49:30 -05:00
Scott Lahteine
1b921b246b
Fix pca9632_set_led_color
...
…when used with an I2C screen.
Co-Authored-By: soimy <soimy@163.com>
2018-08-13 02:40:22 -05:00
Scott Lahteine
aa9d329560
Reduce max accel in Creality configs
2018-08-11 22:56:51 -05:00
Scott Lahteine
c93538e9f3
UBL/planner patch tweaks
2018-08-11 22:50:45 -05:00
Scott Lahteine
0af22549a6
Allow G33 to compile with no LCD
2018-08-11 22:32:09 -05:00
Thomas Moore
fc55f1da01
Account for UBL correction when setting the planner position ( #11486 )
2018-08-10 13:00:50 -05:00
Scott Lahteine
b328fb4dc9
Treat TMC2660 like non-TMC ( #11508 )
2018-08-10 00:30:28 -05:00
Scott Lahteine
72b086b90d
Add A5984 to example configurations
2018-08-09 23:04:27 -05:00
Greg Nutt
a1a5367380
Smoothieboard V1.0/1.1 and A5984 support
2018-08-09 23:03:17 -05:00
Scott Lahteine
f891416e70
No raise on G28 after power-loss
2018-08-07 13:51:36 -05:00
Scott Lahteine
e4ecade8d4
Fix AUTO_POWER_CONTROL compile error
...
Counterpart to #11467
Co-Authored-By: lsellens <lsellens@users.noreply.github.com>
2018-08-06 23:20:51 -05:00
Giuliano
eee1b7c50c
[2.0.x] Fix compile error ( #11465 )
...
Address #11463
2018-08-06 23:14:53 -05:00
Giuliano
e85feb2545
[2.0.x] Better timing handling ( #11461 )
2018-08-06 23:13:36 -05:00
Scott Lahteine
79835590e3
Easier to disable homing validation ( #11458 )
2018-08-06 23:11:37 -05:00
Scott Lahteine
131d216afa
Fix drivers.h dependency, defer macro evaluation ( #11450 )
2018-08-03 21:49:04 -05:00
Scott Lahteine
9c62c47579
[2.0.x] Fix Dual X Carriage tool change crash ( #11447 )
2018-08-03 20:47:29 -05:00
Scott Lahteine
9bae413901
Add Bigtreetech/BIQU KFB 2.0 board ( #11446 )
2018-08-03 18:14:26 -05:00
Marcio Teixeira
f2224755ad
Fix jumping progress bar. ( #11439 )
...
- When LCD_SET_PROGRESS_MANUALLY was disabled and an SD print was not active (i.e. the printer was idle), progress_bar_percent would read uninitialized memory from stack and cause progress bar to jump wildly.
- Also updated conditions in `#ifdef` to match `ultralcd.cpp`
2018-08-03 17:17:02 -05:00
Scott Lahteine
aae02827c0
Cosmetic pins changes
2018-08-03 17:03:19 -05:00
Scott Lahteine
64c493ad82
MKS_12864_OLED code cleanup
2018-07-30 23:22:40 -05:00
Scott Lahteine
b826bf4194
Fix initial safe_speed in jerk code ( #11417 )
2018-07-30 22:50:08 -05:00
forkoz
2cc950d67e
[2.0.x] MKS SBASE Trinamic examples/support ( #11402 )
2018-07-30 22:48:58 -05:00
Roxy-3D
16432376ab
Revert "[2.0.x]Idex and bl touch fixes" ( #11407 )
...
* Revert "[2.0.x] bltouch home refinements (#11397 )"
This reverts commit 74900f7a70#11395 )"
This reverts commit 6dafb90c01
2018-07-28 23:14:46 -05:00
Giuliano
74900f7a70
[2.0.x] bltouch home refinements ( #11397 )
...
Just create a better functions call logic flow
2018-07-28 19:30:14 -05:00
silentninja1
6dafb90c01
[2.0.x]Idex and bl touch fixes ( #11395 )
...
* Fix BLTouch homing
Deploy at start, dont call generic stow function at finish or raise goes too high before setting 0
* Update tool_change.cpp
* Update motion.cpp
* Update motion.cpp
* Update motion.cpp
* Update motion.cpp
* Change brackets to be more in align of Marlin coding standards
2018-07-28 10:33:31 -05:00
Giuliano
5ce5ff8e9b
[2.0.x] fix bltouch homing ( #11379 )
...
Partially revert. Seems to solve the issue, but one report says G29 still fails.
2018-07-27 18:30:08 -05:00
Scott Lahteine
15d68cb496
Pre-override of ST7920 delays before HAL.h
2018-07-26 23:33:18 -05:00
Dave Johnson
8a24ff94d1
AT90USB1286 PIO cleanup and optimization ( #11230 )
...
-normalize `env` and `board` to lowercase naming convention.
-make board `name` follow descriptive convention.
-implement `-fsingle-precision-constant` compile optimization per https://github.com/MarlinFirmware/Marlin/pull/11178#issuecomment-401673901
-fix typo in 5DPRINT entry.
2018-07-26 05:58:28 -05:00
Lee Olivares
094e6d81a5
Add Einstart-S support ( #11219 )
...
Indeed the HAL does not need to be mucked around with to expose ATmega2560 pins not available as numbers on the MEGA board, I'll need to update the wiki with that tidbit and a reference to the pin-mapping comment in `fastio_1280.h`.
2018-07-26 05:52:22 -05:00
Scott Lahteine
244b9a8257
Better fastio 1280/2560 pin list
...
Co-Authored-By: bleughb <36889022+bleughb@users.noreply.github.com>
2018-07-26 05:23:51 -05:00
Scott Lahteine
955a7f0ae9
Improve driver.h macros ( #11371 )
2018-07-26 05:11:22 -05:00
MikeLud
aadcf08913
[2.0.x] add Calibrate Z (M915) to Prepare Menu ( #11331 )
2018-07-26 05:09:49 -05:00
Giuliano
4237c3d9f8
[2.0.x] different bltouch init ( #11135 )
2018-07-26 05:04:09 -05:00
Andy Shaw
624986d423
Ensure ADC conversion is complete before reading ( #11336 )
...
The current Marlin implementation relies on a timer interrupt to start the ADC conversion and read it. However in some circumstances the interrupt can be delayed resulting in insufficient time being available for the ADC conversion. This results in a bad reading and false temperature fluctuations. These changes make sure that the conversion is complete (by checking the ADC hardware via the HAL) before reading a value.
See: https://github.com/MarlinFirmware/Marlin/issues/11323
2018-07-26 03:59:19 -05:00
Scott Lahteine
e2aa635e70
Fix Anet A6 thermistors
...
Co-Authored-By: vitekn <vitekn@users.noreply.github.com>
2018-07-26 02:02:27 -05:00
Bo Herrmannsen
67b205fd45
Add support for board RuRAMPS4D v1.3 ( #11363 )
2018-07-25 19:32:27 -05:00
forkoz
d1c6687ecd
Update MKS sBase pins ( #11357 )
2018-07-25 19:19:09 -05:00
Scott Lahteine
048dbf6eca
Merge pull request #11275 from thinkyhead/bf2_pwm_adjustments
...
[2.0.x] Tweak some SoftPWM code
2018-07-25 19:02:28 -05:00
Scott Lahteine
e05e95cf97
Clean trailing whitespace
2018-07-25 18:49:47 -05:00
Scott Lahteine
22ebbc091f
Tweak some SoftPWM code
2018-07-25 18:09:31 -05:00
Scott Lahteine
32de09f5c5
Specify some extra CR-10S pins
2018-07-25 18:08:09 -05:00
J.C. Nelson
9c2bfa2ab3
Remove extra parameter to enqueue. ( #11364 )
2018-07-25 18:02:02 -05:00
Giuliano
bd3ec66a78
[2.0.x] typo fix ( #11365 )
...
Typo fix
2018-07-25 18:00:47 -05:00
teemuatlut
fbcdf5eaeb
Simplify stepper driver per-axis selection
2018-07-25 02:47:43 -05:00
Scott Lahteine
e5c0b490c8
Add *_DRIVER_TYPE to example configs
...
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
2018-07-25 02:47:30 -05:00
Eyal
fbdbe53290
Fix get_period_inverse(0) so it doesn't crash ( #11334 )
2018-07-25 01:58:40 -05:00
Scott Lahteine
14e2b11195
Fix spelling in configs
2018-07-24 21:03:38 -05:00
Scott Lahteine
4685c7d59f
Followup to M91x I patch
2018-07-24 18:30:28 -05:00
Roxy-3D
62fa028155
Handle dual gantry machines better
2018-07-24 15:34:53 -05:00
Roxy-3D
09485f63e9
add missing ')'
2018-07-22 10:50:41 -05:00
Roxy-3D
a35abce1ac
Fix missing ')'
2018-07-19 19:20:40 -05:00
Scott Lahteine
76d4cfb064
Tweak some Max7219 code
2018-07-19 18:49:39 -05:00
Scott Lahteine
4195757585
Merge pull request #11309 from thinkyhead/bf2_manual_probe_start_z
...
[2.0.x] Manual Z Start Height
2018-07-19 18:26:26 -05:00
Roxy-3D
03b01e2500
Folger Tech i3-2020 now defaults to 2 Max7219 units
2018-07-19 17:02:46 -05:00
Roxy-3D
db85ca93c4
Change Max7219_idle_task() to use a column instead of row if Y-Axis as 16 LED's
2018-07-19 17:01:31 -05:00
Roxy-3D
9660996cc3
Add Multi Unit Support for Max7219 to bugfix_2.0.0 ( #11285 )
...
* Add Multi Unit Support for Max7219 to bugfix_2.0.0
* Apply multi-MAX7219 to example configs
* Tweak some spacing, macros
2018-07-19 13:56:47 -05:00
Scott Lahteine
39c8aed8ba
Add MANUAL_PROBE_START_Z to example configs
2018-07-18 21:49:20 -05:00
Scott Lahteine
2106fa26b1
Add MANUAL_PROBE_START_Z for manual probing
2018-07-18 21:49:20 -05:00
Scott Lahteine
17ed0f815c
Fix tool_change call in UBL G29
...
Fix #11279 , #11252
2018-07-18 20:30:30 -05:00
Scott Lahteine
6d2aff03bd
Merge pull request #11306 from thinkyhead/bf2_power_loss_pin
...
[2.0.x] Add support for power loss detect pin
2018-07-18 20:13:20 -05:00
Scott Lahteine
63a146d424
planner.synchronize at start of tool_change
...
See https://github.com/MarlinFirmware/Marlin/issues/10949#issuecomment-398540498
2018-07-18 20:10:55 -05:00
Scott Lahteine
665ac1e4d0
Add POWER_LOSS_PIN support
2018-07-18 19:55:10 -05:00
Scott Lahteine
2243f72523
Add POWER_LOSS_PIN to example configs
2018-07-18 19:55:10 -05:00
Chris Pepper
47d5fcbbcc
[2.0.x] Change MKS SBASE default serial port to avoid confusion ( #11301 )
2018-07-18 18:43:20 -05:00
Scott Lahteine
c83109c0ae
Merge pull request #11238 from xC0000005/MalyanLCDUpdate
...
[2.0.x] Malyan LCD Feedrate + Better Temp Handling
2018-07-17 21:06:52 -05:00
Scott Lahteine
64f007580b
Fix some header comments
2018-07-17 19:50:24 -05:00
Giuliano
aed1d17a2d
Initialize default units ( #11295 )
...
When `INCH_MODE_SUPPORT` is enabled no default unit is set. This fixes it.
2018-07-17 19:37:30 -05:00
Scott Lahteine
8c40f0c6c7
Reduce TQ message code size
2018-07-17 18:18:52 -05:00
xC0000005
b04e0c0cbb
Malyan LCD feedrate, better temp handling.
2018-07-17 18:18:52 -05:00
Scott Lahteine
065e9c3d66
Add card.longest_filename method
2018-07-17 18:18:52 -05:00
Roxy-3D
71df1f7f57
Don't display M421 information for UBL at startup
...
It takes too long to display the mesh data for large mesh's at startup. We should consider ways to speed this up.
Perhaps it makes sense to display an entire row of the mesh instead of just one mesh point?
2018-07-17 17:19:52 -05:00
Scott Lahteine
be7d1dfb3c
Merge pull request #11267 from teemuatlut/bf2_lpc_spi
...
[2.0.x] LPC1768: Expand hardware SPI class
2018-07-16 21:52:18 -05:00
Giuliano
8f686aa449
[2.0.x] Fix change filament crash ( #11269 )
...
Prevent crash, on filament change, when printer is not homed
2018-07-16 21:49:29 -05:00
teemuatlut
f38c81cdde
LPC176x: Expand HW SPI class
2018-07-14 19:06:27 +03:00
teemuatlut
3b5dec4b13
Add new LPC include folder
2018-07-14 18:58:56 +03:00
Scott Lahteine
e486326910
Vellemann K8400 Y bed size is 180
...
Co-Authored-By: kaimimue <kaimimue@users.noreply.github.com>
2018-07-13 23:19:46 -05:00
Giuliano
e5ea9d200f
[2.0.x] fix kill printer ( #11260 )
...
This will fix kill message on dual printer with 0 alignment offset
2018-07-13 23:12:43 -05:00
Jamie Bainbridge
8c57cadbe7
Include stdlib in fontutils ( #11251 )
...
When `REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER` is defined and Re-ARM build is attempted, `u8g_fontutf8.cpp` includes `fontutils.h` which uses `abs()`.
However, `abs()` is defined in `stdlib.h` which is not included in `fontutils.h`, so compile fails with an error.
Include `stdlib.h` in `fontutils.h` so that `abs()` is defined before `u8g_fontutf8.cpp` needs to use it, resolving the compile error.
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
2018-07-13 00:02:38 -05:00
Scott Lahteine
bf7d0ba859
Assert that XY probe offsets are integers
2018-07-12 22:48:07 -05:00
Scott Lahteine
12854f1909
Add Z_CLEARANCE_MULTI_PROBE to example configs
...
Co-Authored-By: nightgryphon <ngryph@gmail.com>
2018-07-12 22:46:34 -05:00
Scott Lahteine
25e2ca8896
Add Z_CLEARANCE_MULTI_PROBE
...
Co-Authored-By: nightgryphon <ngryph@gmail.com>
2018-07-12 22:46:34 -05:00
Scott Lahteine
fd8a76493b
Unify M91x parameter I meaning, simplify reports ( #11249 )
2018-07-12 22:31:51 -05:00
Scott Lahteine
566d05006d
report_state > event_handler
...
Make the endstop report method track endstop changes on its own.
2018-07-11 21:08:07 -05:00
Scott Lahteine
6b521b6df2
Loosen thermistor table size limit
...
Co-Authored-By: Aaron Griffith <aargri@gmail.com>
2018-07-11 21:08:07 -05:00
Scott Lahteine
20761b88e0
Merge pull request #11212 from AlexanderAmelkin/2.0-HD44780-remove-unused-include
...
[2.0.x][HD44780] Remove unused include
2018-07-08 17:19:59 -05:00
Roxy-3D
603e136e87
Resolve issue where user can't edit UBL's mesh
2018-07-08 14:41:38 -05:00
Alexander Amelkin
ed720194d2
[2.0.x][HD44780] Remove unused include
...
The <binary.h> header is not available in STM32 toolchain
and is not used anywhere in ultralcd_common_HD44780.h.
If it is used anywhere in HD44780 support for other platforms,
it must be included in the corresponding .cpp file directly
and put under appropriate conditional compilation directives
for the platform requiring it.
As I was unable to find such code, I consider the file unused
and hence remove the inclusion.
2018-07-06 23:45:47 -05:00
Scott Lahteine
d05e832f29
Add STM32F1 support for SD-based EEPROM
2018-07-06 23:45:47 -05:00
Scott Lahteine
63f4c9bdb9
Followup to float maths patch
2018-07-06 21:34:09 -05:00
Scott Lahteine
2992112da0
Optimize delta kinematics
...
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-07-04 22:28:56 -05:00
etagle
1367df2875
Replace double with float, optimize calculation
2018-07-04 22:28:56 -05:00
Scott Lahteine
d960d448fa
Optimize calculations with LROUND
2018-07-04 22:22:28 -05:00
Scott Lahteine
68e6650df7
Remove Quake Fast Inverse SQRT (it isn't faster)
2018-07-04 22:22:10 -05:00
etagle
e7e896e7d7
More tweaks to fastio_Due.h
2018-07-04 17:57:47 -05:00
Chris Pepper
55f4744e54
[LPC176x] Endstop Interrupts Feature ( #11202 )
...
Enable the endstop interrupts feature for LPC176x boards. Although Smoothieboard chose to use non-interrupt capable pins for their endstops, and this has been copied by clones, so they can't use it.
2018-07-04 17:51:45 -05:00
Chris Pepper
5abf5bc8a7
[LPC176x] Fix Interrupt forward declarations ( #11200 )
2018-07-04 17:43:14 -05:00
Chris Pepper
cbea385ed7
[2.0.x] Fix LCD_LANGUAGE options list formatting in config ( #11198 )
...
* Fix LCD_LANGUAGE options list formatting in config
* Remove 'cn' language option from list
2018-07-04 17:42:14 -05:00
Scott Lahteine
6837252fba
Merge pull request #11196 from thinkyhead/bf2_fix_m914_sgt
...
[2.0.x] No M914 or SGT with non-sensorless axes
2018-07-04 02:34:48 -05:00
Scott Lahteine
5379c115c8
Fix Trigorilla include typo
2018-07-03 20:23:26 -05:00
Scott Lahteine
9c058091e9
No M914 or SGT set for non-sensorless axes
2018-07-03 20:09:13 -05:00
Scott Lahteine
c7ec6c68e7
Patch SCARA config to match 1.1.x
2018-07-03 20:09:13 -05:00
Scott Lahteine
480a3d3d0c
Apply sensorless homing requirements only for specified axes
2018-07-03 19:16:09 -05:00
Scott Lahteine
47ee149dfd
Merge pull request #11195 from thinkyhead/bf2_tronxy_x3a
...
[2.0.x] Tronxy X3A configurations and thermistor
2018-07-03 19:06:01 -05:00
Scott Lahteine
8c0ec81a19
Followup to #11187
2018-07-03 18:19:26 -05:00
Scott Lahteine
48c1f32b3e
Add configurations for Tronxy X3A
2018-07-03 17:56:48 -05:00
Scott Lahteine
568cfe7caa
Add thermistor 501 (100K Zonestar)
2018-07-03 17:52:06 -05:00
Scott Lahteine
1a0f4dedad
Fix and improve POWER_LOSS_RECOVERY ( #11187 )
2018-07-02 23:21:28 -05:00
Scott Lahteine
e0ab8acf19
Add "Marlin Dev Mode" option
2018-07-02 22:55:21 -05:00
Scott Lahteine
4b2af6ab48
Minor patches to POWER_LOSS_RECOVERY
2018-07-02 17:26:53 -05:00
Scott Lahteine
1ea222e6fc
Turn off DISABLE_INACTIVE_EXTRUDER with SWITCHING_NOZZLE
...
Fix #11183
2018-07-02 17:26:53 -05:00
Roman Moravčík
8299ac121d
[2.0.x] Slovak translation update ( #11175 )
2018-07-01 23:15:51 -05:00
teemuatlut
3de0c85d41
Fix RRW graphical LCD constructor macro ( #11171 )
2018-07-01 23:14:23 -05:00
TheLongAndOnly
cedc158106
[2.0.x] Board specific init macro ( #11170 )
2018-07-01 23:11:42 -05:00
Chris Pepper
5616581eb1
[LPC176x] Update fastio _GET_INPUT, _GET_OUTPUT macros ( #11168 )
2018-07-01 23:02:38 -05:00
Scott Lahteine
8a8eae8d97
Implement more fastio_Due macros ( #11165 )
2018-07-01 01:24:06 -05:00
Scott Lahteine
c51e27d11d
Do a hard kill for failed homing moves ( #11161 )
2018-06-30 21:54:07 -05:00
Scott Lahteine
90ba77ea0f
Lose the old HOMEAXIS macro
2018-06-30 18:13:13 -05:00
Scott Lahteine
2421f3a47d
Detect endstop hits in any direction
2018-06-30 17:27:37 -05:00
Scott Lahteine
f9a090b2cf
Fix Trigorilla 1.4 pins
...
See #11097
2018-06-30 13:45:55 -05:00
Scott Lahteine
8eaac0dab3
Add delta feedrate scaling ( #11153 )
2018-06-30 13:44:27 -05:00
Scott Lahteine
444725ae9a
Non-conflicting CS pins for MKS Gen L
2018-06-30 02:36:01 -05:00
J.C. Nelson
8c9f90153e
Enable Malyan LCD Support for M200 printers. ( #11051 )
2018-06-30 00:35:54 -05:00
Scott Lahteine
fc10101b06
Tweaks to fastio_Due.h
2018-06-30 00:15:50 -05:00
Scott Lahteine
05518d6add
Add newline to end of file
2018-06-29 23:54:16 -05:00
Scott Lahteine
d4fde91222
Fix serial.h including itself
2018-06-29 23:53:25 -05:00
Scott Lahteine
a431013eb7
Fix G33 compile warning
2018-06-29 23:17:51 -05:00
Scott Lahteine
bd7f5848f1
Remove JUNCTION_DEVIATION_INCLUDE_E option ( #11147 )
2018-06-29 22:42:05 -05:00
Scott Lahteine
fbf1c9b496
Fix and tweak POWER_LOSS_RECOVERY ( #11151 )
2018-06-29 22:41:02 -05:00
Colin Gilgenbach
0fff79c24b
Fixes G29_with_retry behavior ( #11045 )
...
* Fix G29 (ABL) retry behavior
2018-06-29 20:48:11 -05:00
Scott Lahteine
3349eb0020
Fix SKEW_CORRECTION compile error
2018-06-29 19:38:18 -05:00
Scott Lahteine
a264030526
Fix "G29" G29_MAX_RETRIES handling
2018-06-29 18:46:31 -05:00
Scott Lahteine
42f9921482
Ignore Z min endstop with separate Z-probe
...
To allow for the case where a Z endstop (e.g., hall effect) is higher than the probe trigger point, don't check the Z min endstop during probe moves. See #11134
2018-06-28 05:06:11 -05:00
Scott Lahteine
1b8973eb1c
Fix up microsteps conditionals
2018-06-27 23:41:32 -05:00
Scott Lahteine
aa4cd2e861
Eliminate stepper.* signed/unsigned warnings
2018-06-27 23:10:51 -05:00
Eduardo José Tagle
edb21f349a
Fix stepper/planner block handling, race conditions ( #11098 )
...
- Allow planner to alter the deceleration phase of the currently executing block.
- Remove BUSY flag, as it is NON ATOMIC to set bits in the Stepper ISR and Planner at the same time.
2018-06-27 18:11:16 -05:00
Scott Lahteine
4d3a9930c5
Match ASM comment spacing to 1.1.x
2018-06-27 17:26:48 -05:00
Scott Lahteine
053438a3aa
Poll all endstops, even when stationary ( #11123 )
2018-06-27 04:18:57 -04:00
Andy Shaw
3b3029c4bf
Make max_e_jerk an array to reduce CPU usage ( #11118 )
2018-06-26 22:38:31 -04:00
Scott Lahteine
d13f76b7da
Patch some loop macros
2018-06-26 20:30:52 -05:00
Scott Lahteine
229b26b02c
Clear LED matrix without startup test
2018-06-26 18:54:01 -05:00
Alexander Amelkin
ffdbc1f42c
STM32F1: Fix SD card persistent store API ( #11090 )
2018-06-26 14:41:23 -04:00
Giuliano
8d8f257384
[2.0.x] Fix advanced pause init values ( #11095 )
...
Fixed for cycle used to initialize default values
2018-06-26 14:37:52 -04:00
etagle
5b49fccf80
Add stepper driver DIR delay configuration option
...
...and recommended pulse width configuration for A4988
2018-06-26 13:28:04 -05:00
Scott Lahteine
d86f25ab63
Fix Serial ISR priority for LPC1768
...
Co-Authored-By: p3p <p3p@p3psoft.co.uk>
2018-06-25 12:15:41 -04:00
etagle
fb4e0b105b
Fix endstops compilation error
2018-06-25 12:10:17 -04:00
Eduardo José Tagle
48a15d1c7e
[2.0.x] Fix stepper/planner race condition and Stepper pulse timer ( #11081 )
...
* Planner: Removal of some race conditions between Stepper ISR and Planner, some of them pointed out by @AnHardt, some of my own findings
* Fixing timing on stepper pulses adding a compensation for the non-null time required to set ports.
2018-06-22 09:15:37 -05:00
Michael Triffon
7e802145cc
[2.0.x] Add CR-10 stock display support for Re-Arm (EXP3) ( #11068 )
2018-06-21 23:08:17 -05:00
Scott Lahteine
50b6204079
Fix LIN_ADVANCE max_e_jerk_factor
...
According to https://github.com/MarlinFirmware/Marlin/issues/9917#issuecomment-399204568
2018-06-21 22:02:34 -04:00
Scott Lahteine
99591dc20c
Filter endstops state at all times ( #11066 )
2018-06-21 20:14:16 -05:00
Scott Lahteine
a5c11bf578
Merge pull request #11075 from thinkyhead/bf2_value_editing
...
[2.0.x] Fix value editing (with callback)
2018-06-21 20:13:58 -05:00
Roxy-3D
1d7dd0edfd
Add the move_z_after_probing() functionality to UBL's G29 J
2018-06-21 13:26:20 -05:00
Scott Lahteine
383129728a
Edit Z fade as whole numbers
2018-06-21 11:52:29 -04:00
Scott Lahteine
1239e8eda2
Fix value editing with callback
2018-06-21 11:52:03 -04:00
Scott Lahteine
7a84b03796
Use MIN/MAX in post-conditionals
2018-06-20 03:15:19 -05:00
Scott Lahteine
a2a30ff0ac
Use Tool 0 for Dual X Axis G29
...
See https://github.com/MarlinFirmware/Marlin/issues/5597#issuecomment-397683325
2018-06-20 01:32:23 -05:00
Scott Lahteine
e366d55bc2
Don't reset stepper timeout for all g-codes
2018-06-19 21:48:28 -05:00
Scott Lahteine
7406f04029
Use MAX (not max) in stepper.h
2018-06-19 20:51:07 -05:00
Roxy-3D
7c54c4ed27
Tiny improvement to M7219
...
The registers within the Max7219 can get corrupted a number of ways. This allows the Max7219 to be reset and fully initialized.
And... it also allows the user to see the initialization pattern.
2018-06-19 14:46:30 -05:00
Giuliano
a65d15c905
[2.0.x] Fix Italian msg len ( #11058 )
...
Fix message to long for 12864 display
2018-06-18 22:04:55 -05:00
Scott Lahteine
d4795e5b8e
[2.0.x] Tweaks and additions for MAX7219 ( #11034 )
2018-06-18 22:04:03 -05:00
Scott Lahteine
e23677a7b2
Update some G-code comments
2018-06-18 16:13:01 -05:00
Chris Pepper
0312c42f9d
[2.0.x] LPC176x Serial cleanup ( #11032 )
2018-06-16 20:59:22 -05:00
Scott Lahteine
c1269c2ec1
Tweak AVR critical section defines
2018-06-16 17:42:32 -05:00
Scott Lahteine
da94e0bd27
Unsigned eeprom mesh addresses
2018-06-15 15:51:57 -05:00
Chris Pepper
f88adcbfd5
[2.0.x][LPC176x] Fix binary linking broken by pio update ( #11026 )
2018-06-15 15:32:51 -05:00
Simon Jouet
e2aeda61ed
HAL for Espressif ESP32 Wifi
2018-06-13 19:33:35 -05:00
Scott Lahteine
091f742432
Add WIFISUPPORT to example configs
2018-06-13 19:27:33 -05:00
Scott Lahteine
19d4c7c1cd
Tweak HAL header comments
2018-06-13 19:08:42 -05:00
Giuliano
cce0523a95
[2.0.x] reset bltouch on home ( #11018 )
...
Added reset bltouch instead. This ensure properly stow even when in error.
2018-06-13 14:09:13 -05:00
Scott Lahteine
4c8d6df13c
Extra insurance against endstop false positives ( #11013 )
2018-06-13 01:22:02 -05:00
Scott Lahteine
81edbfa665
Merge pull request #11004 from ejtagle/always_honor_maximum_step_rate
...
[2.0.x] Fix stepper pulse minimum period and timing calculations
2018-06-12 22:17:22 -05:00
Scott Lahteine
f3fed52348
Fix coolstep_min_speed / sensorless homing
...
Fix #8890
2018-06-12 22:12:46 -05:00
etagle
a215725df6
Fix stepper pulse timing
...
Always honor minimum period on stepper pulse generation, and fix timing calculations
Signed-off-by: etagle <ejtagle@hotmail.com>
2018-06-12 21:34:24 -05:00
Scott Lahteine
0d79128c8d
Localize stepper-specific defines
2018-06-12 21:16:54 -05:00
Scott Lahteine
a9861a780e
Tweak HAL heading
2018-06-12 19:40:17 -05:00
Scott Lahteine
cf53e502a2
No need to set input after attachInterrupt
2018-06-12 18:43:11 -05:00
Karl Andersson
e0276d2f32
Official STMicroelectronics Arduino Core STM32F4 HAL compatibility ( #11006 )
2018-06-12 18:38:00 -05:00
Scott Lahteine
4dbec774b5
HAL_*_TIMER_RATE => *_TIMER_RATE
2018-06-12 16:39:12 -05:00
Scott Lahteine
12689f2470
Merge pull request #11001 from thinkyhead/bf2_junction_deviation_fix
...
[2.0.x] Updates for junction_deviation_mm
2018-06-11 22:31:17 -05:00
Scott Lahteine
9b945c13a1
Fix STM32F1 ISR_ENABLED
2018-06-11 22:09:45 -05:00
Scott Lahteine
9d04f47d98
Improvements for junction_deviation_mm
...
- Drop `max_jerk` with `JUNCTION_DEVIATION`
- Add `max_e_jerk_factor` for use by `LIN_ADVANCE`
- Recalculate `max_e_jerk_factor` when `junction_deviation_mm` changes
- Fix LCD editing of `junction_deviation_mm`
2018-06-11 22:05:16 -05:00
Scott Lahteine
f2c3b0d476
Use bit flags for homed/known
2018-06-11 22:05:16 -05:00
Scott Lahteine
4832be52d7
Followup to G29 O
2018-06-11 21:57:26 -05:00
Robert Mendon
86170e6a66
[2.0.x] Add O (optional) flag to G28/G29 ( #10913 )
2018-06-11 21:51:48 -05:00
Alexey Shvetsov
2ddba201c0
STM32F1 HAL Fixes ( #10999 )
...
- Enable / disable interrupts with `__iSeiRetVal` / `__iCliRetVal`
- Add STM32F1 to Travis CI tests
2018-06-11 20:00:56 -05:00
Scott Lahteine
43bdd0bfe4
Fix indent in stepper.h
2018-06-11 19:17:46 -05:00
Scott Lahteine
2ba198a624
Tweak M122 report spacing
2018-06-10 20:33:18 -05:00
Eduardo José Tagle
5590c8ffd0
Fix MarlinSerial (AVR) ( #10991 )
...
An undocumented hw bug makes the UART lose chars when RX ISR is disabled, even for a very small amount of time. This happens when RX_BUFFER > 256, and the result is corrupted received commands. Solved by implementing pseudo-atomic operations on 16bit indices.
2018-06-10 20:32:20 -05:00
Scott Lahteine
3fd1f32b73
Fix ADC key and chamber temp
2018-06-10 20:11:40 -05:00
Scott Lahteine
117fd007a9
Followup to pin error change
2018-06-10 19:28:45 -05:00
Scott Lahteine
ae07a3e4aa
Multiplier edit large ranges
2018-06-10 18:22:12 -05:00
Scott Lahteine
20a5db03bb
Junction Deviation limit (0.01 to 0.3)
2018-06-10 18:22:08 -05:00
Scott Lahteine
a2f521d34b
Add Junction Deviation mm runtime setting ( #10990 )
2018-06-10 18:02:54 -05:00
Scott Lahteine
590ce1c33e
Fix serial debug ouput
2018-06-10 17:54:22 -05:00
Scott Lahteine
968a5d2e63
Protected pin err for M226
2018-06-10 17:45:47 -05:00
Scott Lahteine
4b90cd8ead
Merge pull request #10922 from ejtagle/bugfix-2.0.x
...
[2.0.x] Adaptive multiaxis step smoothing, and tons of fixes
2018-06-10 16:28:52 -05:00
Giuliano
f1cdfe3dfd
[2.0.x] stow bltouch before start homing ( #10987 )
2018-06-10 16:27:14 -05:00
etagle
6f14bcaa3e
Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping
...
The timing value should be properly set for ALL boards. The compiler will check and set maximum step rate calculations based on those values.
2018-06-10 16:02:47 -05:00
etagle
39a7e7720d
Adaptive multiaxis step smoothing
...
- Stepper bugs fixed
- Support MIXING_EXTRUDER with Linear Advance
- Miscellaneous cleanup
2018-06-10 16:02:47 -05:00
etagle
99af086cea
Add hidden Serial overflow debug options
2018-06-10 04:25:42 -05:00
etagle
d90e8fcad9
Fix XON/XOFF implementation
...
Pointed out by @GMagician
2018-06-10 04:25:42 -05:00
Scott Lahteine
bbf80440bf
Add sanity-check for MOTHERBOARD
2018-06-10 04:03:33 -05:00
Giuliano
b64cc9329e
[2.0.x] Fix dual enstop home ( #10980 )
2018-06-10 02:08:47 -05:00
Scott Lahteine
8a376e6beb
Update MINIMUM_STEPPER_PULSE description
2018-06-10 00:13:03 -05:00
Scott Lahteine
3701869e6c
Add HAL_timer_start for AVR, use stepper timer to time pulses
2018-06-09 22:30:13 -05:00
Giuliano
e970e429b6
[2.0.x] Fix null check in lsDive ( #10978 )
2018-06-09 22:03:49 -05:00
etagle
d82704354f
Increase the planner first block HOLD delay to 100mS
2018-06-09 21:12:37 -05:00
Scott Lahteine
779d4a17a0
Highlight 64128N and common ST7565 difference
...
Followup to #10920 , addressing #10962
2018-06-09 19:18:41 -05:00
Scott Lahteine
b9418439b9
Prevent MB false-positive on bad board name
2018-06-08 19:58:43 -05:00
Scott Lahteine
88314b8910
CREALITY_ENDER is long gone
...
As noted in #10965
2018-06-08 19:53:21 -05:00
Scott Lahteine
334341c632
Hephestos config updates ( #10960 )
2018-06-07 21:23:55 -05:00
Scott Lahteine
f74278b8b1
Add -4 thermocouple to list in configs
2018-06-07 21:04:06 -05:00
Scott Lahteine
7ba5afff01
Allow FAN_PIN override, pins cleanup ( #10956 )
2018-06-07 16:46:13 -05:00
Scott Lahteine
55aedf036b
Fix M503 ABL mesh report. (Zero-based IJ indices)
2018-06-07 16:36:50 -05:00
Scott Lahteine
e7623b5788
Restore Z_PROBE_PIN to pinsDebug_list.h
2018-06-07 15:39:24 -05:00
Scott Lahteine
a426986df8
Ensure pins set to INPUT after attachInterrupt ( #10928 )
2018-06-06 20:59:08 -05:00
Scott Lahteine
d8b983f624
More concise M503 output for M906, M913, M914 ( #10947 )
2018-06-06 20:58:28 -05:00
Giuliano
eb1026d438
[2.0.x] Fix compile warning ( #10931 )
2018-06-05 22:44:34 -05:00
Scott Lahteine
c2bdbdffaa
Prevent a buffer overflow in diveToFile
...
Co-Authored-By: akunt
2018-06-05 22:13:17 -05:00
Giuliano
c9d1a620d4
[2.0.x] fix indentations ( #10934 )
2018-06-05 02:03:26 -05:00
Roxy-3D
d550da084f
Fix Max7219 control pins for use with 32-bit platforms
2018-06-04 13:37:23 -05:00
Scott Lahteine
c16e41e9e6
STM32F4 pins cleanup
2018-06-03 19:08:04 -05:00
Scott Lahteine
c685c7b7dd
STM32F4: All pins can do PWM
2018-06-03 04:30:15 -05:00
Scott Lahteine
2fd9ba56da
LED menu item bool (like Case Lights)
2018-06-03 00:34:29 -05:00
Scott Lahteine
ad8d3150aa
Cleanup for dual endstops homing
2018-06-03 00:34:29 -05:00
Scott Lahteine
61181b7f24
Add macros for ST7565 commands
2018-06-02 20:48:44 -05:00
Eduardo José Tagle
d3c02410a8
[2.0.x] Small assorted collection of fixes and improvements ( #10911 )
...
* Misc fixes and improvements
- Get rid of most critical sections on the Serial port drivers for AVR and DUE. Proper usage of FIFOs should allow interrupts to stay enabled without harm to queuing and dequeuing.
Also, with 8-bit indices (for AVR) and up to 32-bit indices (for ARM), there is no need to protect reads and writes to those indices.
- Simplify the XON/XOFF logic quite a bit. Much cleaner now (both for AVR and ARM)
- Prevent a race condition (edge case) that could happen when estimating the proper value for the stepper timer (by reading it) and writing the calculated value for the time to the next ISR by disabling interrupts in those critical and small sections of the code - The problem could lead to lost steps.
- Fix dual endstops not properly homing bug (maybe).
* Set position immediately when possible
2018-06-01 19:02:22 -05:00
Scott Lahteine
2deff0d9b9
Fix/Improve junction deviation
...
- Respect axis max acceleration limits instead of forcing a fixed acceleration value.
- The `junction_unit_vec` ensures proper handling of entry and exit speeds even when the axes involved have different limits.
2018-05-31 20:09:53 -05:00
Scott Lahteine
6885ca606c
Drop JUNCTION_ACCELERATION from example configs
2018-05-31 20:07:28 -05:00
Chris Pepper
d87257f63c
[2.0.x][LPC176x] Fix PIO build flags ( #10909 )
...
Don't build and link with different flags, the binary may not work.
2018-05-31 19:08:31 -05:00
Axel
ae322e0c54
[2.0.x] Add GTM32 Pro VB support ( #10898 )
2018-05-31 00:11:38 -05:00
Scott Lahteine
d259070980
Clean up trailing spaces from vim, etc.
2018-05-31 00:09:41 -05:00
Scott Lahteine
21d812d502
Fix the Z un-hop on G11
...
Co-Authored-By: zarthcode <anthony.clay@zarthcode.com>
2018-05-29 23:41:36 -05:00
Scott Lahteine
d3c473002a
For SCARA probe Y offset is proximal/distal
2018-05-29 21:55:53 -05:00
Scott Lahteine
b90f54b0fc
Improve probe logging
2018-05-29 21:54:13 -05:00
Scott Lahteine
3f2a062a57
Fix M914 value range (-64...+63)
...
Fix #10896
2018-05-29 12:02:15 -05:00
Scott Lahteine
b6cd8d9cc6
Set deltas to park on the left
2018-05-29 11:44:31 -05:00
Scott Lahteine
9713538427
HOTENDS for Switching Nozzle with Switching Extruder
2018-05-29 11:05:52 -05:00
Scott Lahteine
c68b7b3913
Update Fan 2 and E0 Auto Fan pins for Trigorilla
2018-05-28 21:11:12 -05:00
Scott Lahteine
cbcb284f4a
Allow libServo::attach to work on Teensy 3.5/3.6
2018-05-28 20:56:24 -05:00
Chris Pepper
f89f7c4a82
[2.0.x][LPC176x][Build] Force single precision constants, disable freestanding ( #10892 )
2018-05-28 19:38:22 -05:00
Scott Lahteine
4299e5dc8b
Modify E-stepping macros for use in LINEAR_ADVANCE ( #10885 )
2018-05-28 19:34:08 -05:00
Scott Lahteine
8f14ef855d
More concise commentary in planner.cpp
2018-05-28 19:25:18 -05:00
Scott Lahteine
6919e87656
Minor cleanup of multi-stepping logic
2018-05-28 17:44:33 -05:00
android444
16da5c62d0
Teensy 3.x fastio pullup ( #10890 )
2018-05-28 16:25:12 -05:00
Scott Lahteine
853a9056ac
Long thermistor tables need special consideration
2018-05-28 06:28:34 -05:00
Scott Lahteine
a4f9c3373f
Tweak thermistor spacing
2018-05-28 03:44:32 -05:00
Scott Lahteine
9b9b62b218
delay(SERVO_DELAY) => safe_delay(servo_delay[servo_index])
2018-05-28 03:44:32 -05:00
Scott Lahteine
1ce97f1f6d
Faster (bisect) search in thermistor tables ( #10883 )
2018-05-27 23:27:51 -05:00
Scott Lahteine
0ca9db7051
Correct HOTENDS for SWITCHING_EXTRUDER
2018-05-27 23:22:48 -05:00
Scott Lahteine
945139e328
Clean up some formatting
2018-05-27 17:58:40 -05:00
android444
9c235ef821
[HAL]Add support for ST7920 - Teensy 3.x ( #10872 )
2018-05-27 03:36:57 -05:00
Eduardo José Tagle
7b9f0302d4
Fix Bresenham rounding errors, add link to article ( #10871 )
2018-05-27 01:49:59 -05:00
Scott Lahteine
2566342979
Adjust some commentary
2018-05-27 00:10:25 -05:00
Scott Lahteine
1b200f3312
Sanity check SWITCHING_EXTRUDER with SINGLENOZZLE
2018-05-26 23:26:23 -05:00
Scott Lahteine
6775a16c97
Fix switching extruder stepping with LA
2018-05-26 19:07:01 -05:00
Scott Lahteine
2e139fe50f
Tweak configuration spacing
2018-05-26 18:33:51 -05:00
Scott Lahteine
931ab4ec40
Rename Junction Deviation options
2018-05-26 18:33:51 -05:00
Scott Lahteine
aaaf09bda2
BEZIER_JERK_CONTROL => S_CURVE_ACCELERATION
2018-05-26 18:33:51 -05:00
Scott Lahteine
cf7d5a642a
Fix manual moves for switching tools ( #10868 )
2018-05-26 18:30:53 -05:00
Eduardo José Tagle
1da2c4f1c1
Text LCD display routine fix. Coauthored with @MagoKimbra ( #10864 )
2018-05-26 18:13:33 -05:00
Bob-the-Kuhn
1c0ad8bbae
wrong type of exit method
2018-05-26 08:17:03 -05:00
Scott Lahteine
01d37e00af
Fix up stepper ISR with linear advance timing ( #10853 )
...
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-05-26 01:00:13 -05:00
Eduardo José Tagle
6f330f397e
[2.0.x] Buffer overflow and scroll fix, UTF8 cleanup ( #10844 )
2018-05-25 23:32:37 -05:00
Bob Kuhn
235facd545
install AVRDUDE 5.10, faster disk find for LPC1768 ( #10849 )
2018-05-25 20:26:48 -05:00
Scott Lahteine
645df23eb0
Fix warning with FASTER_GCODE_PARSER disabled
2018-05-25 06:45:42 -05:00
Scott Lahteine
d74e333c0f
Make sure FAN_ANIM_FRAMES is defined
2018-05-25 05:28:50 -05:00
Bob Kuhn
e2db509d58
[2.0.x] Update/Fix LPC1768 extra script upload_extra_script.py ( #10843 )
...
* Use a different method to find the volume info in Windows
2018-05-25 04:31:18 -05:00
Scott Lahteine
7261f48872
Fix reset of endstops and move state
2018-05-24 19:33:36 -05:00
Scott Lahteine
50fa8e01c1
Minor optimization of axis_did_move bits
2018-05-24 19:08:07 -05:00
Scott Lahteine
a94506ada0
Fix K8400 Y min pos, M118 comment
2018-05-24 08:21:16 -05:00
Scott Lahteine
336a022529
Support Malyan LCD without SD
2018-05-24 05:01:18 -05:00
Scott Lahteine
f28e366b77
Followup for core endstops
2018-05-24 03:02:57 -05:00
Scott Lahteine
8b44745bc7
Clean up and consolidate SD-related code ( #10831 )
2018-05-24 01:18:56 -05:00
Scott Lahteine
9644d56b42
Patches for core motion tests
2018-05-24 00:49:01 -05:00
Scott Lahteine
5f8591528e
Remove #pragmas that don't help c files
2018-05-23 23:47:16 -05:00
Scott Lahteine
230ae6a143
Default G30 to engage / disengage
2018-05-23 16:57:23 -05:00
Scott Lahteine
3e3789da85
Regression: Endstops Core compatibility ( #10823 )
...
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-05-23 03:45:25 -05:00
Scott Lahteine
c89649b46e
Suppress U8glib build warnings
2018-05-23 02:47:36 -05:00
Axel
bbd09a99f1
32 bit boards classification cleanup ( #10818 )
...
- Ordering and match classification between `boards.h` and `pins.h`
- Check `pins.h` environments
2018-05-22 21:20:24 -05:00
Scott Lahteine
ee333f6be2
Followup to endstops tweaks
2018-05-22 20:41:03 -05:00
Axel
d98bc71af7
Boards classification arrangement ( #10814 )
...
STM32 ARM Cortex-M3 boards were listed as M4
2018-05-22 02:56:51 -05:00
Scott Lahteine
4b610b333e
Tweak G38 formatting
2018-05-22 01:56:03 -05:00
Scott Lahteine
d2647c1f19
Fix G1 behaviour after tool unpark
...
Fix #10777 for 2.0.x
Co-Authored-By: Ante Vukorepa <o.orcinus@gmail.com>
2018-05-22 00:53:00 -05:00
Scott Lahteine
3bb950c69a
Fix DEBUG_LEVELING_FEATURE for MBL
...
As noted in #10777
2018-05-22 00:49:15 -05:00
Scott Lahteine
1af98519cd
Group and adjust LCD buttons code
2018-05-22 00:37:45 -05:00
Scott Lahteine
0c3773d724
Cleanup in stepper_indirection.h
2018-05-22 00:36:03 -05:00
Scott Lahteine
4118199ddd
Tweaks to core headers
2018-05-21 20:32:18 -05:00
Scott Lahteine
4b2f6e3b2b
[2.0.x] Add endstop noise filter ( #10796 )
2018-05-21 15:51:38 -05:00
Scott Lahteine
65a004564c
Stepper::set_position needed for some applications
2018-05-21 15:21:33 -05:00
Scott Lahteine
435ecb6b67
Followup to stepper/planner refactor
2018-05-20 23:13:38 -05:00
Bob Kuhn
6dfbb39f83
[LPC1768] Add error-handling to upload script, update autobuild.py ( #10802 )
2018-05-20 21:22:04 -05:00
Scott Lahteine
68d7fcec83
Simplify and fix Z fade height edit
...
Fix #10761
2018-05-20 12:29:23 -05:00
Bob Kuhn
d557c84a71
[2.0.x] Error for FAST_PWM_FAN with 32 bit CPU ( #10798 )
2018-05-20 11:37:55 -05:00
etagle
569df3fc0c
Fix interrupt-based endstop detection
...
- Also implemented real endstop reading on interrupt.
2018-05-20 07:10:24 -05:00
etagle
a4af975873
Fix planner block optimization
...
- Fixed the planner incorrectly avoiding optimization of the block following the active one.
- Added extra conditions to terminate planner early and avoid redundant computations.
2018-05-20 07:10:24 -05:00
etagle
e0ca627033
Planner block HOLD flag
...
Allows the Stepper ISR to wait until a given block is free for use. Allows Planner to plan the first move, which is split into two.
2018-05-20 06:23:58 -05:00
etagle
a11eb50a3e
Refactor and optimize Stepper/Planner
...
Better encapsulation and considerably reduce stepper jitter
2018-05-20 06:23:58 -05:00
etagle
0566badcef
Add memory barrier, optimal interrupt on-off
...
Disabling an ISR on ARM has 3 instructions of latency. A Memory barrier is REQUIRED to ensure proper and predictable disabling. Memory barriers are expensive, so avoid disabling if already disabled (See https://mcuoneclipse.com/2015/10/16/nvic-disabling-interrupts-on-arm-cortex-m-and-the-need-for-a-memory-barrier-instruction/ )
2018-05-20 02:39:34 -05:00
Scott Lahteine
c2fb2f54a1
Use assembly for AVR ISR vectors
...
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-05-20 01:58:51 -05:00
Scott Lahteine
206014a957
Fix LPC176x timer functions
...
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-05-20 01:58:51 -05:00
Scott Lahteine
59f7861bcb
Move backtrace to the HAL folder ( #10790 )
2018-05-20 01:33:21 -05:00
Scott Lahteine
228139eae6
Tweak some LCD comments
2018-05-19 21:00:08 -05:00
Scott Lahteine
7dc03ce721
Simplified fix for babystep pulse width
...
Alternative to the apparently superfluous double delay
2018-05-19 21:00:08 -05:00
Scott Lahteine
65270d6a96
Fix LIN_ADVANCE + SWITCHING_EXTRUDER
...
Followup to #10656
2018-05-19 18:32:00 -05:00
Bob Kuhn
62e2987488
add AT90USB support & add items to popup menu ( #10779 )
2018-05-19 17:39:26 -05:00
Bob Kuhn
9ad42d6617
add delay between pulse edges ( #10778 )
2018-05-19 17:12:16 -05:00
Scott Lahteine
83d42f33e1
Add HAS_HOTEND_OFFSET_Z conditional
2018-05-19 17:05:15 -05:00
GMagician
3c76bda2d8
Fix switching extruder
...
`DONT_SWITCH` got lost along the way. Replace it with `DO_SWITCH_EXTRUDER` and adjust the code.
2018-05-19 17:05:15 -05:00
Scott Lahteine
c173a31060
Fix some compile warnings
2018-05-19 16:54:48 -05:00
Giuliano
e1d9046efc
[2.0.x] Temperature reading fix ( #10774 )
2018-05-19 15:39:36 -05:00
Chris Pepper
9b64fdbc3a
[LPC176x] HAL: Add missing program space definition ( #10776 )
2018-05-19 15:37:54 -05:00
Scott Lahteine
50270b53a0
Clear up some more compile warnings
2018-05-17 18:40:49 -05:00
etagle
06fd4d7b28
Improve NOMORE, NOLESS, and LIMIT macros
2018-05-17 18:23:14 -05:00
etagle
40d7e12827
Removing warnings from compilation
2018-05-17 18:04:22 -05:00
Scott Lahteine
0755fe8ba2
Add FAN_MAX_PWM to example configs
2018-05-15 21:18:47 -05:00
Jiri Jaburek
43ddb29f9e
Add FAN_MAX_PWM for M106-controlled fans
2018-05-15 21:18:46 -05:00
Scott Lahteine
0ea60d506a
Clear up LCD-related compile issues
2018-05-15 00:06:59 -05:00
Scott Lahteine
eb2eb72720
Modify UBL mesh_is_valid and use in leveling_is_valid ( #10746 )
2018-05-14 22:36:03 -05:00
Scott Lahteine
b7dfc79988
Disable SERIAL_PORT_2 by default and sanity-check it ( #10748 )
2018-05-14 21:38:24 -05:00
Scott Lahteine
3f6073e23a
Followup tweak to lcdprint_u8g.cpp
2018-05-14 14:42:11 -05:00
Scott Lahteine
fb608938f8
Prevent compilation of unused u8g-oriented code
2018-05-14 13:31:04 -05:00
Scott Lahteine
35258dd50b
Consistent heating status and status reset
...
Fix #10699
2018-05-13 17:18:19 -05:00
Scott Lahteine
37b15fe4cf
Reorder HAL timer header items
2018-05-13 16:50:39 -05:00
Scott Lahteine
836b0bbeee
Fix MBL line_to_destination
...
Fix #10708
2018-05-13 16:50:39 -05:00
Scott Lahteine
ba4c32eec5
Followup to _AXIS patch
2018-05-13 10:43:35 -05:00
Scott Lahteine
d9154ebdf6
Followup to math patch
2018-05-13 09:30:27 -05:00
Scott Lahteine
f07260c33f
Don't babystep on long click unless printing
...
As pointed out in #10731
2018-05-13 08:11:35 -05:00
Scott Lahteine
883b0c9880
Convert custom maths to inlines ( #10728 )
2018-05-13 08:10:08 -05:00
Scott Lahteine
08e36e264e
Apply _AXIS macro
2018-05-13 06:51:01 -05:00
Scott Lahteine
99ecdf59af
Smarter MIN, MAX, ABS macros
...
Use macros that explicitly avoid double-evaluation and can be used for any datatype, replacing `min`, `max`, `abs`, `fabs`, `labs`, and `FABS`.
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-05-13 04:52:56 -05:00
Scott Lahteine
083ec9963e
Tweaks to heater / lcd conditions
2018-05-13 04:52:56 -05:00
etagle
9d98a62699
Followup to HAL optimizations and delays
...
- Cleanups, fixes for Due HAL code.
- TC_IER is write-only. Use TC_IMR to test ISR state.
2018-05-13 00:46:23 -05:00
Scott Lahteine
8f8c6a9bc4
Move get_axis_position_mm to Planner ( #10718 )
2018-05-12 09:59:11 -05:00
Scott Lahteine
a1062eec5b
Better handling of DELAY_NS and DELAY_US ( #10716 )
...
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-05-12 08:34:04 -05:00
Scott Lahteine
f5aaa2d6c0
Fix some compiler warnings
2018-05-12 05:28:12 -05:00
Scott Lahteine
3614e6ce0f
Fix Switching Extruder with Linear Advance
2018-05-12 02:26:14 -05:00
Scott Lahteine
625035a9ce
Fix M301 access to lpq_len ( #10714 )
...
Co-Authored-By: Zwaubel
2018-05-12 02:13:40 -05:00
etagle
1b225a2809
DUE: Emergency parser for the USB CDC
2018-05-12 02:12:11 -05:00
Scott Lahteine
306f0f2135
Move Stepper::synchronize to Planner ( #10713 )
...
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-05-12 01:38:02 -05:00
Scott Lahteine
f2e3c9896e
Fix compile warnings in backtrace
...
Part of #10688
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-05-11 23:38:29 -05:00
Scott Lahteine
acacee80a2
Add JUNCTION_ACCELERATION_FACTOR to configs
...
Part of #10688
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-05-11 23:13:27 -05:00
Giuliano
d99f1b2245
[2.0.x] EEPROM code cleanup ( #10710 )
2018-05-11 18:06:04 -05:00
ManuelMcLure
8679f671ed
Remove dependency on PI. ( #10701 )
2018-05-11 17:55:56 -05:00
Scott Lahteine
6671c064cd
Use arc moves for G26 if enabled ( #10696 )
...
Co-Authored-By: ManuelMcLure <manuelmclure@users.noreply.github.com>
2018-05-11 02:15:14 -05:00
Scott Lahteine
325bbbc8c2
[2.0.x] Enable AD595 and AD8495 in concert ( #10693 )
...
* Allow both AD595 and AD8495 in concert
* General temperature code tweaks
2018-05-11 01:01:51 -05:00
Scott Lahteine
c43235dd39
Remove non-special comments
2018-05-11 00:36:04 -05:00
ManuelMcLure
613a3be167
Remove hidden dependencies on destination. Fixes #10686 . ( #10691 )
2018-05-11 00:30:51 -05:00
Scott Lahteine
23a876b08d
Update a comment in motion.cpp
2018-05-10 15:03:37 -05:00
Scott Lahteine
439e0cdd0f
Patch up reverse_pass_kernel (and other planner code) ( #10674 )
2018-05-10 01:30:55 -05:00
Scott Lahteine
fe5c308872
Correction to Printrboard SDSS pin ( #10677 )
...
Co-Authored-By: Simon Swenson <simon-swenson-8351@users.noreply.github.com>
2018-05-10 01:28:55 -05:00
Scott Lahteine
265161ba30
Blink the value for unhomed/unknown axes ( #10670 )
2018-05-10 01:19:20 -05:00
Scott Lahteine
57c2f8d2f6
Trailing whitespace cleanup
2018-05-10 00:17:10 -05:00
Scott Lahteine
b76344c080
More Trinamic cleanup
2018-05-10 00:12:10 -05:00
Scott Lahteine
473c6d3a91
Drop extra RIGIDBOT_PANEL from D6 config
2018-05-09 18:02:07 -05:00
Giuliano
44f3a6dc3b
[2.0.x] Add missing axes to M911, M912 ( #10668 )
2018-05-09 17:58:11 -05:00
Scott Lahteine
722aba77f3
Fix LIN_ADVANCE + SWITCHING_EXTRUDER stepper directions ( #10656 )
2018-05-09 14:36:09 -05:00
Scott Lahteine
a225d2e99e
Fix compilation with UBL and Arc/Bézier
...
Fix #10660
2018-05-09 00:40:37 -05:00
Scott Lahteine
6d9ec1852a
Fix compilation of say_units
...
Fixes #10663
2018-05-09 00:30:29 -05:00
Scott Lahteine
19f189b4e5
Add UBL support for G2/G3 and G5 ( #10648 )
2018-05-08 11:10:45 -05:00
Scott Lahteine
4c663b0216
Add JUNCTION_DEVIATION to example configs
2018-05-08 10:08:54 -05:00
Scott Lahteine
4d4bf7897d
Junction Deviation jerk limiting option
2018-05-08 10:08:54 -05:00
Scott Lahteine
0436e16fb2
Apply shorthand Assembler macros
2018-05-08 10:08:54 -05:00
Scott Lahteine
d1b619be52
Standardize some hexadecimals
2018-05-08 09:19:18 -05:00
Scott Lahteine
ec05408453
Add 3-frame fan animation to bitmaps ( #10654 )
2018-05-08 09:06:01 -05:00
Scott Lahteine
55f1f8446b
Show correct current units in M503
2018-05-08 06:29:53 -05:00
Giuliano
4e16e699c1
Fix sanity checks for dual axes ( #10633 )
2018-05-07 03:34:26 -05:00
Scott Lahteine
a1fab8336e
Fix abort of SD printing
2018-05-07 02:52:26 -05:00
Scott Lahteine
e978e6e782
[2.0.x] Arrange LCD options by type ( #10630 )
2018-05-06 19:16:55 -05:00
Scott Lahteine
8c5bc77fb9
Fix the sanity-check for config versions
2018-05-06 09:37:00 -05:00
Scott Lahteine
1f11b0f612
Fully init planner sync block
2018-05-06 08:16:54 -05:00
Scott Lahteine
f30241bda5
Merge pull request #10614 from thinkyhead/bf2_synced_planner_set_position
...
[2.0.x] Improve sync of planner / stepper position, asynchronous G92
2018-05-06 03:10:43 -05:00
Scott Lahteine
840ff60952
Bring some configs up to date
2018-05-06 02:42:27 -05:00
Phr3d13
71cd681473
Add Geeetech i3 Pro C / W examples ( #10626 )
...
Added base example configs for Geeetech's Pro C and Pro W machines.
2018-05-06 02:07:54 -05:00
Scott Lahteine
62e7a9c671
Fix up fwretract handling
2018-05-06 01:24:14 -05:00
Scott Lahteine
bfe223e120
Adjust usage of stepper.synchronize
2018-05-06 01:24:14 -05:00
Scott Lahteine
af1950a63e
Improve sync of stepper positions
2018-05-06 01:24:14 -05:00
Scott Lahteine
0c23792344
Apply int32_t to stepper
2018-05-05 18:21:03 -05:00
Roxy-3D
c2c02bdc67
Change Max7219 coordinates to traditional (X,Y)
2018-05-05 16:08:54 -05:00
Scott Lahteine
b337698f96
Additional patch for no heated bed
2018-05-04 00:15:37 -05:00
Scott Lahteine
76da6cc544
Fix Ender 2 build volume
2018-05-02 19:03:29 -05:00
Scott Lahteine
81b632c255
Additional temp-oriented improvements
2018-05-02 08:43:22 -05:00
nightdemonx
e911635fb1
Add thermocouple with AD8495 support
2018-05-02 08:43:16 -05:00
Scott Lahteine
00e86f1c2d
Add Velleman RGB-LED strip support to K8400
2018-05-02 08:10:48 -05:00
Bob-the-Kuhn
410b023b50
[2.0.x] Add Viki support to RAMPS_FD_V1 (DUE) ( #10598 )
2018-05-02 07:54:06 -05:00
Scott Lahteine
b7e938a9fb
LCD_BED_LEVELING enables a sub-menu for ABL
2018-05-01 07:13:56 -05:00
Scott Lahteine
a90d99c27c
Rename float32 => float52, etc.
2018-05-01 07:08:47 -05:00
Scott Lahteine
d7b699ec34
Fewer includes of vector_3.h
2018-05-01 07:05:18 -05:00
thisiskeithb
9312636ee4
Ender-3 config files ( #10585 )
2018-05-01 06:44:50 -05:00
Scott Lahteine
05fca752d6
Clean up autostart handling
2018-05-01 01:35:57 -05:00
Scott Lahteine
c87b0e21be
Add units to probe speed comments
2018-04-30 23:50:28 -05:00
Scott Lahteine
2c1205d8b1
Improve debug of homing move feedrate
2018-04-30 23:49:51 -05:00
Scott Lahteine
c8e4b7c8a6
Fix XY homing move away rate
2018-04-30 23:49:07 -05:00
Scott Lahteine
05c33833e7
[2.0.x] Add NO_LCD_MENUS option ( #10582 )
2018-04-30 21:16:31 -05:00
Scott Lahteine
524cc392f4
Fix sd_status comparison
...
Co-Authored-By: perkmeister <perkmeister@users.noreply.github.com>
2018-04-30 21:09:50 -05:00
MagoKimbra
1f92b9a4ed
Fix do_probe_move with fr_mm_s ( #10576 )
2018-04-30 16:28:20 -05:00
Scott Lahteine
a73cece360
Fix utility.cpp for DEBUG_LEVELING_FEATURE
...
As mentioned in https://github.com/MarlinFirmware/Marlin/issues/9429#issuecomment-385305597
Co-Authored-By: Jack Bradach <jack@bradach.net>
2018-04-30 03:40:50 -05:00
Scott Lahteine
4dfc011d86
Fix homing with probe feedrates
2018-04-30 03:35:07 -05:00
Scott Lahteine
59fda986ea
Allow Z_AFTER_PROBING to be 0
2018-04-30 03:25:47 -05:00
Scott Lahteine
63e4afc910
Do rounding in integer (instead of FIXFLOAT)
...
Co-Authored-By: Bob-the-Kuhn <bob-the-kuhn@users.noreply.github.com>
2018-04-29 19:33:26 -05:00
Scott Lahteine
616651ff23
Add sanity check for LED_CONTROL_MENU
...
Addressing #10569
2018-04-29 18:34:57 -05:00
Scott Lahteine
9e0d99c0c6
Round all floats in string conversion functions ( #10566 )
2018-04-29 00:51:36 -05:00
Scott Lahteine
3f68203324
Modify FastIO error message
2018-04-28 20:27:36 -05:00
Scott Lahteine
1dab44213a
Fix the TMC26X initializer CS pin argument
...
From #10531
Co-Authored-By: chriscg9 <chriscg9@users.noreply.github.com>
2018-04-28 12:02:45 -05:00
Scott Lahteine
cd08f01bb4
Fix M421 comment in gcode.h
2018-04-28 11:16:52 -05:00
Scott Lahteine
7546f87949
Allow a home bump of 0 when homing Z with probe
2018-04-28 10:26:31 -05:00
Scott Lahteine
d470a1234f
Fix ENABLED/DISABLED for DUE
...
…and any other platforms where `false`/`true` are defined as `0x0`/`0x1`.
This fixes issue #10550 .
2018-04-28 10:12:37 -05:00
Scott Lahteine
683dc24e0f
When homing with Z probe bump at Z_PROBE_SPEED_SLOW
2018-04-28 08:50:23 -05:00
Scott Lahteine
8db7fb226a
Fix M420 C for UBL
2018-04-28 08:14:20 -05:00
Scott Lahteine
ed8d2bc225
Clean up some endstop inverting examples
2018-04-28 08:04:43 -05:00
Scott Lahteine
c7305be4d2
Fix some endstop inverting settings
2018-04-28 08:04:33 -05:00
Bob-the-Kuhn
f973ff49ae
[2.0.x] MKS SBASE - Separate SD_DETECT for LCD and on-board SD cards ( #10557 )
2018-04-28 07:24:07 -05:00
Scott Lahteine
5ac226aa93
Further cleanup of inline delays
2018-04-27 19:22:22 -05:00
Marcio Teixeira
724e9f56c8
Removed "const" to match parser. ( #10548 )
2018-04-27 17:48:52 -05:00
Giuliano
2e1939e85c
[2.0.x] report error on unsupported commands ( #10553 )
...
Raise an error when an unknown/unsupported G/M command is requires.
This will address #10546
2018-04-27 17:40:27 -05:00
Scott Lahteine
a474a7e675
Correct AVR_ATmega328_FAMILY macro
...
…as with #10540
Co-Authored-By: per1234 <per1234@users.noreply.github.com>
2018-04-27 03:13:46 -05:00
Scott Lahteine
f790b4bc0a
Reorganize some conditionals
2018-04-27 02:23:11 -05:00
Scott Lahteine
a51ba6e3f6
Fix ABL grid bounds test for Delta/SCARA
...
Addressing #10538
2018-04-27 02:23:10 -05:00
Scott Lahteine
df6bc812b5
Fix disable of Z_HOMING_SENSITIVITY for HOMING_Z_WITH_PROBE
...
As pointed out in #10532
2018-04-27 02:23:10 -05:00
Scott Lahteine
63e0b36f8b
Fix G29_RECOVER_COMMANDS typo
2018-04-27 02:23:10 -05:00
Scott Lahteine
f83361a814
Apply const to tmc_sensorless_homing
2018-04-27 02:23:10 -05:00
Scott Lahteine
212e52e485
Basic delay for Max7219 on ARM
2018-04-27 00:41:29 -05:00
Scott Lahteine
7b6e742436
Wrap delay macros in do{}while(0)
2018-04-26 18:18:23 -05:00
Karl Andersson
58ca3be1ec
delayMicroseconds() cannot be called in critical section ( #10535 )
...
on the STM32 platform
2018-04-26 14:31:01 -05:00
Bob-the-Kuhn
00dfaae8df
[2.0.x] Platformio - automate build & environment selection ( #10503 )
2018-04-26 02:42:06 -05:00
Scott Lahteine
299c4fed42
Undefine PIDTEMPBED without a bed heater
2018-04-26 01:30:10 -05:00
Scott Lahteine
456cf971af
HAL FastIO cleanup and fixes
2018-04-26 00:40:16 -05:00
J.C. Nelson
5b5e322356
Set Interrupt Priorities and Grouping for STM32F103. ( #10517 )
2018-04-26 00:21:16 -05:00
Scott Lahteine
0e450df6a2
MKS OLED support for RUMBA
...
Based on #10519
Co-Authored-By: Alex <alex18881@users.noreply.github.com>
2018-04-25 23:00:44 -05:00
Scott Lahteine
2578996631
[2.0.x] Emergency parser for multiple serial ports ( #10524 )
2018-04-25 20:58:00 -05:00
Scott Lahteine
8cc31d1b2e
Cleanup to emergency parser
...
Followup to #10516
2018-04-25 06:54:37 -05:00
Chris Pepper
2242b98248
[LPC176x] Emergency Parser Feature ( #10516 )
2018-04-25 06:44:26 -05:00
Scott Lahteine
eef0248a1c
Add M420 C to adjust the whole mesh ( #10522 )
2018-04-25 06:43:45 -05:00
Eduardo José Tagle
c1e5ebbc1e
[2.0.x] AVR: Atomic bit set and clear of upper pin ports without critical section ( #10502 )
...
* AVR: Atomic bit set and clear
The critical section can be dropped, saving 3 cycles per access. Also simplified pin toggling for all ports.
2018-04-24 13:45:43 -05:00
Marcio Teixeira
02a711c4d6
[2.0.x] Fix crash upon repeated calls to process_subcommands_now_P ( #10509 )
2018-04-24 13:44:22 -05:00
Scott Lahteine
a3ce8a3fcd
Add sanity checks for EMERGENCY_PARSER
2018-04-24 09:24:26 -05:00
Scott Lahteine
f06c3c38b9
Fix M0_M1 with no LCD
2018-04-24 09:22:05 -05:00
Scott Lahteine
c82dd5129f
Revert potentially-not-redundant UBL test
...
Response to #10435
2018-04-24 08:04:13 -05:00
Scott Lahteine
9789c1c719
Fix current_temperature_chamber compile error
...
Fix #10505
2018-04-24 07:55:58 -05:00
Eduardo José Tagle
0c428a66d9
Proper AVR preemptive interrupt handling ( #10496 )
...
Also simplify logic on all ARM-based interrupts. Now, it is REQUIRED to properly configure interrupt priority. USART should have highest priority, followed by Stepper, and then all others.
2018-04-23 22:05:07 -05:00
Scott Lahteine
f423e54f77
Strip trailing spaces
2018-04-23 18:00:43 -05:00
Scott Lahteine
8177c4334e
Merge pull request #10498 from xC0000005/MalyanLCDFix
...
Fix overridden Malyan LCD functions
2018-04-23 17:22:43 -05:00
Scott Lahteine
cb46cb8480
Add HAS_HEATED_BED conditional ( #10495 )
2018-04-23 17:13:01 -05:00
Marcio Teixeira
10a25f733e
Add SENSORLESS_HOMING to Archim 2.0 ( #10500 )
2018-04-23 17:11:33 -05:00
xC0000005
24d23ce49b
Fix function definitions for Malyan LCD
2018-04-23 16:56:37 -05:00
Alexey Shvetsov
ad58b626a3
Fix pin mappings for Viki2 on Azteeg X5 GT ( #10487 )
2018-04-22 18:41:30 -05:00
Scott Lahteine
9e07df5c1b
Extra options for LEVEL_BED_CORNERS ( #10483 )
2018-04-22 02:50:48 -05:00
Scott Lahteine
1c3d49afe0
Fix G28 with Z_AFTER_PROBING
...
Fix #10476
2018-04-22 01:23:26 -05:00
Scott Lahteine
b6747c742a
Cleanup AZTEEG_X5_GT pins for VIKI
...
What should the SD detect and SDSS pins be? Followup soon on #8138
2018-04-22 01:19:43 -05:00
Scott Lahteine
023385ca59
Merge pull request #10479 from thinkyhead/bf2_creality_power_loss_resume
...
[2.0.x] Creality3D Power-Loss Recovery
2018-04-22 00:17:44 -05:00
Scott Lahteine
3396671011
[2.0.x] Reset LCD status to fallbacks ( #10470 )
...
* Remove obsolete strings
* Tweak some static consts
* Reset LCD status to fallbacks
2018-04-22 00:16:30 -05:00
Scott Lahteine
d58450c82a
Russian language update
...
Co-Authored-By: anton-piliugin <34044202+anton-piliugin@users.noreply.github.com>
2018-04-22 00:14:20 -05:00
Scott Lahteine
11ab017dd0
Creality3D Power-Loss Recovery
2018-04-21 21:56:50 -05:00
Scott Lahteine
594d6f9efd
Add POWER_LOSS_RECOVERY to example configs
2018-04-21 19:40:46 -05:00
Scott Lahteine
7dcd0a1cff
Add R parameter to G28 to specify pre-raise
2018-04-21 19:07:48 -05:00
Scott Lahteine
2f4b4d6076
Add Stopwatch::resume method
2018-04-21 19:06:05 -05:00
Scott Lahteine
a90cbc6339
[2.0.x] Wait for bed heaters between probing ( #10472 )
2018-04-21 15:43:21 -05:00
Scott Lahteine
a0dac95d25
Merge pull request #10460 from thinkyhead/bf2_trigorilla_14
...
[2.0.x] Split TRIGORILLA into 1.3 and 1.4
2018-04-20 18:25:40 -05:00
Scott Lahteine
f0cbf3d432
Correction to sanity check
2018-04-20 18:16:27 -05:00
Scott Lahteine
d8a8eec6ea
Add THERMAL_PROTECTION capability
...
Based on #10465
In response to `M115` the firmware reports if Thermal Protection is enabled (1) or not (0). This information can be used by software such as OctoPrint (more precisely the Printer Safety Check plugin) to warn users when Thermal Protection is not enabled in the firmware.
Co-Authored-By: andrivet <sebastien@advtools.com>
2018-04-20 16:50:50 -05:00
Scott Lahteine
186d71b361
Complete CREALITY_ENDER revert
2018-04-20 16:17:25 -05:00
Scott Lahteine
11ef432476
Match Makefile to boards.h
2018-04-20 16:13:50 -05:00
Scott Lahteine
2be5fe5ddf
Split TRIGORILLA into 1.3 and 1.4
2018-04-20 16:12:25 -05:00
Scott Lahteine
80e29492c6
TRIGORILLA => TRIGORILLA_13
2018-04-20 16:12:25 -05:00
Scott Lahteine
dea686cf55
Define short pin names in fastio for STM32 ( #10461 )
2018-04-20 14:54:35 -05:00
Scott Lahteine
65a6a86d19
Don't report point 0 in MBL G29
2018-04-20 13:12:50 -05:00
Scott Lahteine
6faa93d787
Add G29_RETRY_AND_RECOVER to example configs
2018-04-19 19:45:53 -05:00
Marcio Teixeira
5cc7916e69
Add G29_RETRY_AND_RECOVER feature
...
- Add an option to retry G29, optionally executing a G-code procedure after each failed probe.
2018-04-19 19:45:53 -05:00
Scott Lahteine
78ea4871f9
Fix up enqueue now functions
...
…and apply to MALYAN_LCD.
2018-04-19 19:45:53 -05:00
Roxy-3D
23635c2b64
Update ubl_motion.cpp
...
Restore necessary and needed loop termination logic.
2018-04-19 12:04:35 -05:00
Scott Lahteine
8ca3c43d73
Updated language_data spacing, headers
2018-04-19 06:16:16 -05:00
Scott Lahteine
184c077c58
Correct includes (u8g.h) and spelling
2018-04-19 06:16:16 -05:00
Yunhui Fu
627348b46c
move the TALL_FONT_CORRECTION to language files
2018-04-19 06:16:16 -05:00
Yunhui Fu
77bc653524
Use X windows 6x12 bitmap font to support western languages.
2018-04-19 06:16:15 -05:00
Yunhui Fu
d81649b365
Update language data for sk.
2018-04-19 06:15:19 -05:00
Yunhui Fu
41839746a2
Removed unused macros
2018-04-19 06:15:19 -05:00
Scott Lahteine
4f184ba5da
[2.0.x] Add BOARD_MKS_BASE_15 with digital micro-stepping ( #10454 )
...
* Add BOARD_MKS_BASE_15 with digital micro-stepping
* Rename MKS_13 to MKS_GEN_13
2018-04-18 22:58:43 -05:00
Scott Lahteine
ad6baa5c9d
Fix for UBL set_bed_leveling_enabled
2018-04-18 00:14:48 -05:00
Scott Lahteine
df2f24617b
Use 0 as the bed position (not Z_MIN_POS)
2018-04-17 20:32:56 -05:00
Karl Andersson
428c54f2ad
[2.0.x] HAL for STM32F4 ( #10434 )
2018-04-17 17:33:29 -05:00
Chris Pepper
744bcaee61
[2.0.x] Fix problems compiling with Arduino IDE ( #10441 )
...
* Fix problems compiling u8glib utf8 support on Arduino
* Change header in auto-generated font data
* Change include in font gen scripts
2018-04-17 17:28:55 -05:00
GMagician
20772492aa
Fix compile warnings in AVR fastio.h ( #10440 )
2018-04-17 17:26:57 -05:00
Scott Lahteine
f57a008c58
Merge pull request #10443 from thinkyhead/bf2_fix_and_improve
...
[2.0.x] Improve UBL mesh report, M420 V T, M421 N, and…
2018-04-17 16:59:31 -05:00
Scott Lahteine
89b1580587
Fix compile error in tmc_status
2018-04-17 16:13:28 -05:00
Scott Lahteine
52c024e260
M221 with no parameters report flow
2018-04-17 16:06:25 -05:00
Scott Lahteine
01b01f6dfd
Tweak fwretract.retract debug, comments
2018-04-17 16:05:25 -05:00
Scott Lahteine
e4acd2c40e
One fewer compare in _lcd_move_xyz
2018-04-17 16:03:15 -05:00
Scott Lahteine
e05c825a05
Update position for UBL non-segmented activate/deactivate
2018-04-17 16:02:02 -05:00
Scott Lahteine
d462be6de6
Try FIXFLOAT rounding based on sign
2018-04-17 15:59:04 -05:00
Scott Lahteine
39c6f65ce7
Ignore LCD_BED_LEVELING with UBL
2018-04-17 15:57:44 -05:00
Scott Lahteine
0746aff595
Improve UBL mesh report. Add M420 T, M421 N
2018-04-17 15:52:56 -05:00
Scott Lahteine
3c826e5d05
Prevent delay when power is already on
...
Fix #10410
2018-04-17 04:34:31 -05:00
Scott Lahteine
5a064d0e94
Fix bug in planner.set_position_mm
2018-04-16 04:19:58 -05:00
Scott Lahteine
0945674ba2
Use H0 by default with UBL_MESH_EDIT_MOVES_Z ( #10428 )
2018-04-15 20:49:14 -05:00
Scott Lahteine
6cb83758d7
Fix Brazilian Portuguese language duplicates
2018-04-15 19:18:08 -05:00
Scott Lahteine
8f57e098de
Use end-of-line comments in planner.cpp
2018-04-15 19:02:30 -05:00
Scott Lahteine
6c7a17dba6
Abort SD printing more safely ( #10407 )
...
Allow the current command to complete when aborting an SD print, otherwise some commands (G28, G29, etc.) will cause trouble.
2018-04-15 18:27:54 -05:00
Chris Pepper
c9aed73987
Fix missed includes from HAL macro patch ( #10416 )
2018-04-15 18:27:34 -05:00
Scott Lahteine
9f8a96fb8a
Brazilian Portuguese update ( #10409 )
2018-04-15 13:13:46 -05:00
Yunhui Fu
93273a4c9e
Fix u8g.h search path error ( #10419 )
...
Support env MARLIN_LANGS for user select generated language, and update doc; update script to generate dogm_font_data_ISO10646_1.h automatically.
2018-04-15 13:12:02 -05:00
Scott Lahteine
584735c994
u8g.h => clib/u8g.h
2018-04-14 12:26:01 -05:00
Scott Lahteine
29dda871cb
Patch "upload_disk" to make python happy
2018-04-13 22:27:08 -05:00
Scott Lahteine
36b97bde9f
clear_block_buffer, kill_current_block in quick_stop
2018-04-13 22:04:53 -05:00
Scott Lahteine
99282a46e9
Make sure ABL (manual) starts close to the bed
2018-04-13 20:19:30 -05:00
Roxy-3D
21f13f9e57
Stow Probe at end of G29 J3
2018-04-13 14:46:47 -05:00
KangDroid
6c535081ec
[2.0.x] Add optional menu item to toggle software endstops ( #10389 )
2018-04-13 00:24:09 -05:00
Scott Lahteine
3c5c6d478a
Prettify process_parsed_command
2018-04-13 00:23:11 -05:00
Scott Lahteine
0535ebc4d2
MESH_BED_LEVELING before PROBE_MANUALLY
2018-04-12 22:45:52 -05:00
Scott Lahteine
bb7064cc30
Tweak MBL move to bed code
2018-04-12 22:43:02 -05:00
Chris Pepper
cc6d41e1d3
Use a macro for HAL header redirection ( #10380 )
2018-04-12 20:25:08 -05:00
Luc Van Daele
12785583d0
[2.0.x] G33 MIN_STEPS_PER_SEGMENT ( #10386 )
2018-04-12 20:22:29 -05:00
Yunhui Fu
c96412a78f
[2.0.x] UTF-8 language translation support ( #10213 )
2018-04-12 20:14:01 -05:00
Scott Lahteine
daa712455b
Make sure MBL starts close to the bed
...
Fix #10390
2018-04-12 19:36:37 -05:00
Scott Lahteine
4c8751727a
Fix M118 parameter handling
...
Fix #10388
2018-04-12 19:10:04 -05:00
Scott Lahteine
3bc179a16f
Compress/update comments ubl_motion
...
…to fit more code on the screen and correct outdated commentary contrasting ABL.
2018-04-12 18:07:19 -05:00
Luc Van Daele
646aa20b43
Overhaul of G33 Delta Calibration ( #8822 )
2018-04-11 21:14:48 -05:00
Luc Van Daele
ac2e0afb62
Low Point for delta calibration ( #10363 )
2018-04-11 18:59:46 -05:00
Eduardo José Tagle
57a899a412
[2.0.x] 6th-order jerk-controlled motion planning in real-time for AVR ( #10373 )
2018-04-11 18:13:42 -05:00
Bob-the-Kuhn
85014cd132
[2.0.x] LPC1768 - automatic selection of upload disk ( #10374 )
2018-04-11 14:41:16 -05:00
Scott Lahteine
8669dba5e6
Merge pull request #10172 from noingwhat/2.0.x-Filament-Change-Acceleration
...
[2.0.x] Filament load/unload add acceleration for Bowden
2018-04-11 00:39:11 -05:00
Scott Lahteine
472ab0cc24
Tweak RAMPS SDSS pins
2018-04-10 16:47:48 -05:00
LichtiMC
b94c8defee
Provide additional information about SMART-RAMPS board ( #10353 )
2018-04-10 04:02:55 -05:00
Scott Lahteine
6f8e228880
Add RESET_PIN to pins_RAMPS_SMART.h
2018-04-10 03:34:20 -05:00
Sean
2d9b0a66fe
Add Filament Change accelerations
2018-04-09 23:57:27 -05:00
Scott Lahteine
71d3523254
Add Filament Change accelerations to example configs
2018-04-09 23:57:23 -05:00
Scott Lahteine
8b8ad14178
Add Z_PROBE_LOW_POINT to prevent damage
2018-04-09 17:23:03 -05:00
Scott Lahteine
82dafbba33
Add Z_PROBE_LOW_POINT to example configs
2018-04-09 01:55:05 -05:00
Roxy-3D
a731a723e8
Better i3-2020 Z_PROBE_OFFSET_FROM_EXTRUDER
2018-04-08 21:26:36 -05:00
Roxy-3D
26cc12eaa4
Resolve corruption of Max7219 Debug LED Matrix
2018-04-08 21:26:36 -05:00
Scott Lahteine
dca69efc11
Update Bed PID comments
2018-04-08 06:44:47 -05:00
Scott Lahteine
56486c5c0e
Apply const to manage_inactivity
2018-04-08 04:00:26 -05:00
Scott Lahteine
a6485456df
Fix LIGHTWEIGHT_UI with UBL
...
See https://github.com/MarlinFirmware/Marlin/issues/10317#issuecomment-379100702
2018-04-08 03:24:22 -05:00
Scott Lahteine
e02fc4f1d6
Better RESTORE_LEVELING_AFTER_G28 sanity-check
...
As suggested by @GMagician
2018-04-08 03:24:15 -05:00
Scott Lahteine
44a697ab04
Set STM32F1 TEMP_TIMER_FREQUENCY to 1K
...
Responding to https://github.com/MarlinFirmware/Marlin/pull/8833#issuecomment-379426803
2018-04-08 01:08:05 -05:00
Scott Lahteine
cec6e19099
Add RepRapPro Huxley configuration
...
Based on #10343 by @indazoo
2018-04-08 00:37:18 -05:00
Scott Lahteine
9ff4e9e1e6
Patch _IS_HW_SPI so defined() works
2018-04-07 23:29:00 -05:00
Scott Lahteine
cea398849e
Tweak to gcode_line_error/return
2018-04-07 21:25:49 -05:00
etagle
a29adde5c0
Implement BEZIER_JERK_CONTROL
...
Enable 6th-order jerk-controlled motion planning in real-time.
Only for 32bit MCUs. (AVR simply does not have enough processing power for this!)
2018-04-07 21:03:28 -05:00
Scott Lahteine
5932df7ea1
Add BEZIER_JERK_CONTROL to example configs
2018-04-07 21:03:22 -05:00
Lenbok
0e8242180d
Chamber temperature monitoring and auto fan control.
...
This is an initial cut for feedback, updated for 2.0.x.
Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?
Chamber temperatures are not reported on the LCD in any way.
When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.
As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
2018-04-06 23:09:06 -05:00
Scott Lahteine
5b3bda1c16
Add Chamber Temp options to example configs
2018-04-06 23:09:06 -05:00
Bob-the-Kuhn
acda4ecb20
Fix DUE Trinamic SW/HW SPI sanity check ( #10336 )
2018-04-06 22:22:30 -05:00
Bob-the-Kuhn
ab715c70d1
TMC SPI sanity-check and pins debugging ( #10324 )
2018-04-06 20:24:54 -05:00
Scott Lahteine
4dc7e64789
Update Slovak language
...
Based on #10313 by @rmoravcik
2018-04-06 20:23:20 -05:00
Scott Lahteine
0dccf9ea6a
Merge pull request #10318 from marcio-ao/pr-einsy-retro-tmc2130
...
[2.0.x] Fix TMC2130 DIAG1 active high, Einsy Retro
2018-04-06 20:18:34 -05:00
Marcio Teixeira
2efc072fdb
Clear progress bar on completion ( #10333 )
...
Fix #10330
2018-04-06 20:13:19 -05:00
GMagician
6ce060cfe0
[2.0.x] Update language_it.h ( #10322 )
...
Updated to #10296
2018-04-06 20:07:46 -05:00
Marcio Teixeira
9356cf648f
Added support for Einsy Retro
...
http://reprap.org/wiki/EinsyRetro
2018-04-06 19:48:46 -05:00
Marcio Teixeira
75037493fa
Default active low for TMC2130 DIAG1 ( #10294 )
...
- Added sanity check to inform users to set the endstop to inverting
when using SENSORLESS_HOMING
2018-04-06 19:48:46 -05:00
Scott Lahteine
e8e60263c8
Scale feedrate (mm/s to deg/s) for SCARA
2018-04-06 19:47:48 -05:00
Scott Lahteine
051303ad42
Russian language updates
...
From #10311 by @anton-piliugin
2018-04-05 00:46:46 -05:00
Sean
2fa0a73c2c
Implement filament change continuous purge
2018-04-04 20:57:51 -05:00
Scott Lahteine
d133ad61f3
Add continuous purge to example configs
2018-04-04 20:56:18 -05:00
Scott Lahteine
4b25543633
Backtrace formatting cleanup
2018-04-04 20:24:39 -05:00
Bob-the-Kuhn
902c885782
Switch to TMC2130 compatible hardware SPI & misc ( #10299 )
2018-04-04 20:13:27 -05:00
Scott Lahteine
1c36606886
Fix MSG_HEATING_FAILED_LCD_BED macro evaluation
2018-04-04 19:01:22 -05:00
Scott Lahteine
fe91514395
MBL should add z_offset regardless of fade ( #10308 )
2018-04-04 18:57:33 -05:00
Marcio Teixeira
8bc93c6f2b
Improve heating/cooling LCD messages ( #10293 )
2018-04-04 18:29:27 -05:00
GMagician
21a47b50f4
Additional tool-change fixes ( #10304 )
...
Followup to #10257
2018-04-04 17:06:33 -05:00
Scott Lahteine
f68b4265a6
Fix a probe pin definition
2018-04-02 21:52:34 -05:00
Yunhui Fu
a019eebdd6
support utf8 unicode for test language ( #10220 )
2018-04-02 20:03:25 -05:00
Scott Lahteine
656219d867
Add configs for Creality CR-8
2018-04-02 20:02:04 -05:00
Karl Andersson
7cbbc2af7a
[2.0.x] Optional heater signal inversion ( #10260 )
2018-04-02 19:37:41 -05:00
Marcio Teixeira
4d1a61335c
[2.0.x] Fixed Makefile for Marlin 2.0 ( #10255 ) ( #10281 )
...
* Fixed Makefile for Marlin 2.0 (#10255 )
- Makefile now supports the new Marlin 2.0 directory hierarchy.
- RELOC_WORKAROUND is now automatically enabled based on avr-gcc version.
* Makefile support for U8glib and TMC2130Stepper
- Updated paths for oliver's U8glib 1.19.1
- Added option for teemuatlut's TMC2130Stepper 2.2.1
2018-04-02 19:36:27 -05:00
Scott Lahteine
241996d5d6
Merge pull request #10257 from thinkyhead/bf2_tool_change_debug
2018-04-02 19:33:45 -05:00
Scott Lahteine
4c79dc1093
Fix a Serial+EEPROM compile error
...
Fixes #10278
2018-04-02 03:11:20 -05:00
Scott Lahteine
93305a2d5e
Fix some spellings
2018-04-02 03:03:37 -05:00
Scott Lahteine
adcb87f0db
Z Endstop Servo => Z Probe Servo
2018-04-01 23:54:21 -05:00
Scott Lahteine
4f0eafce8f
Add more AVR boards to Makefile
2018-04-01 18:22:06 -05:00
Scott Lahteine
4a23069de9
Fix Ender 4 / CR-8 compilation
...
- Assign 243 (like EFB) as Ender-4/CR-8 board ID
- Add to `Makefile`
- Add to `pins.h`
2018-04-01 18:22:06 -05:00
Scott Lahteine
02f0f95d40
Handle disabled HYBRID_THRESHOLD in EEPROM ( #10275 )
2018-04-01 16:58:37 -05:00
Scott Lahteine
9ec2c03c5b
Fix likely error in retract/recover
...
Addressing #10200
2018-03-31 23:01:13 -05:00
Scott Lahteine
49f384a2ab
Note about MKS_MINI_12864 in sanitycheck
2018-03-31 22:52:23 -05:00
Scott Lahteine
2672120a97
Do a small raise for all move-back
2018-03-31 22:43:05 -05:00
Scott Lahteine
5acccbacc1
Simplified leveling-based tool change
2018-03-31 22:43:05 -05:00
Scott Lahteine
1a75165f35
For set_z_fade_height use set_bed_leveling_enabled
2018-03-31 22:43:05 -05:00
Scott Lahteine
d1734a089a
Split up tool_change for some setups
2018-03-31 22:43:05 -05:00
Scott Lahteine
a9f94f260a
Some RADDS pin updates
2018-03-31 22:15:24 -05:00
Scott Lahteine
31df43212c
Use lcd_printPGM_utf in more places
...
Fix #10256
2018-03-31 20:49:20 -05:00
Scott Lahteine
7d8a46519f
Output ABC for delta stepper counts
2018-03-31 20:13:32 -05:00
Scott Lahteine
6098efcc59
Use float62 for LCD edit of Z Fade
2018-03-31 20:03:09 -05:00
Scott Lahteine
f6d13e2295
Allow Z_SAFE_HOMING sanity checks to handle floats
2018-03-31 19:01:56 -05:00
Scott Lahteine
889fd5f71f
Backtrace minor cleanup
2018-03-31 18:59:36 -05:00
Scott Lahteine
53f0c7522a
Symmetrical FWRETRACT Z Hop
...
Do the Z lift normally before setting Z back to its prior value. But do the Z lower using spoofing. This should produce proper symmetrical movement.
2018-03-30 15:54:01 -05:00
Scott Lahteine
ac7e97f4fe
Change order of inactive stepper disable/enable
...
This ensures that steppers that share an enable pin will only be disabled for a miniscule time.
2018-03-30 15:07:38 -05:00
Scott Lahteine
55e9b85ad6
Clear the "Wait for user" message set by M0/M1
...
See https://github.com/MarlinFirmware/Marlin/issues/10246#issuecomment-377146936
2018-03-29 18:38:12 -05:00
Scott Lahteine
b6a55f0891
Temporary workaround for tool-change compile error
...
Pending a more complete solution to tool-change Z deviation.
2018-03-29 17:55:57 -05:00
Scott Lahteine
b852781eba
Fix BLTOUCH compile error
...
Followup to #10250
2018-03-29 17:55:57 -05:00
AnHardt
c1f58a238d
No delay in sensorless quick homing ( #10254 )
2018-03-29 16:10:20 -05:00
Scott Lahteine
1be955e52a
Alert users about low Z jerk values
2018-03-28 23:08:33 -05:00
Scott Lahteine
9e4c037cef
Wait before turning off PRINTER_EVENT_LEDS at print end ( #10248 )
2018-03-28 22:59:28 -05:00
Scott Lahteine
8b7381b626
Clear sensorless homing in home_delta after first move-to-top
2018-03-28 22:01:42 -05:00
Scott Lahteine
dbe2b6f7b0
Do moves towards endstops differently in do_homing_move
2018-03-28 22:01:42 -05:00
Scott Lahteine
d573a2cada
Fix pins_RAMPS.h for 32-bit platforms
...
Followup to 436e5b7
2018-03-28 22:01:20 -05:00
Scott Lahteine
f04be05a14
"G28 Z Forbidden" => "Home XY first"
...
Some languages will need to be updated for proper phrasing
2018-03-28 21:51:15 -05:00
Scott Lahteine
a97624dd81
Allow pinsDebug "Analog in" long int
2018-03-28 20:40:28 -05:00
Scott Lahteine
7b8bb2519e
Fix gcode_line_error call
...
Followup to 3007eee
2018-03-28 20:29:41 -05:00
Scott Lahteine
aa20b3ef7c
Fix linear/3-point manual leveling buffer overrun
...
Fixes #10137
2018-03-28 18:41:22 -05:00
Alexey Shvetsov
cbdc78ec0f
Fix STM32 compilation with PlatformIO ( #10245 )
2018-03-28 18:35:20 -04:00
Scott Lahteine
9d2ea5d64b
Undo German changes
...
See 941e9bd329 (commitcomment-28262166)
2018-03-28 17:05:14 -05:00
Scott Lahteine
2bc7f416ee
Fix missing comma in tmc_sgt
...
Fixes #10209
2018-03-28 17:05:14 -05:00
Scott Lahteine
38378cd0e8
M218 with DELTA needs planner.h
...
Fix #10232
2018-03-28 17:05:14 -05:00
Scott Lahteine
3007eee22e
Require a checksum when writing to SD
...
From #10204 by @adriancuzman
2018-03-28 17:05:13 -05:00
Bob-the-Kuhn
9656a82609
Fix G53/CNC_COORDINATE_SYSTEMS compilation, Travis testing ( #10227 )
2018-03-28 14:14:39 -04:00
Eduardo José Tagle
749f19e502
[2.0.x] Move backtrace to a shared location ( #10237 )
...
- And implement the `backtrace()` function call
2018-03-28 14:13:20 -04:00
xC0000005
7dc256432f
Restore STM32F1 series to working order. ( #10229 )
...
The `_O2` attribute is no longer needed on the malyanlcd function, and the macros have broken timer numbers - reset this to a function to return the right device. Also fix the bit order cast in SPI.
2018-03-28 14:07:52 -04:00
Rob Power
d1f14202a9
[2.0.x] NANODLP_Z_SYNC requires linear axes ( #10240 )
2018-03-28 14:03:34 -04:00
Scott Lahteine
b287560258
Fix say_M603
2018-03-28 12:54:58 -05:00
Scott Lahteine
436e5b7ea3
Apply spacing in pins files
2018-03-28 12:52:08 -05:00
Scott Lahteine
4d533b9baa
Update bq Hephestos 2 probe offset
...
From #10234 by @thopiekar
2018-03-27 21:05:03 -05:00
Bob-the-Kuhn
78df07ac71
Merge pull request #10221 from ejtagle/bugfix-2.0.x
...
[2.0.x] DUE: Several fixes to the backtracker
2018-03-27 03:26:10 -05:00
etagle
8934a2c49b
Added some missing Thumb instructions to the traceback follower, so now it is able to traceback through switch() statements
2018-03-27 04:30:38 -03:00
etagle
328edea03a
Several fixes to the backtracer. Tested ant it works
2018-03-26 03:42:54 -03:00
Scott Lahteine
aa6dacbbdf
German update
...
Based on #10216
2018-03-25 15:21:13 -04:00
Yunhui Fu
8322a79bb9
update the UTF-8 C strings for Chinsee languages, for Simplified and Traditional Chinese ( #10211 )
2018-03-25 12:37:54 -04:00
ejtagle
9a24c0ae3f
Tons of fixes to the backtracker code, and also added an extra backtracker that does not require unwind tables to work and it is used if unwind tables are absent
2018-03-25 00:52:04 -03:00
Scott Lahteine
a891af2f7a
Enforce minimum TMC2130 / TMC2208 libs
2018-03-24 15:57:22 -04:00
Bob-the-Kuhn
75b381cd28
Merge pull request #10203 from Bob-the-Kuhn/sanity-check-fix
...
[2.0.x] Fix TMC sanity checks that always fail
2018-03-24 14:06:34 -05:00
Bob-the-Kuhn
433e984d1f
move comment to fix compile error
2018-03-24 13:44:54 -05:00
Bob-the-Kuhn
f7857ac8a8
Merge pull request #10185 from ejtagle/bugfix-2.0.x
...
[2.0.x] DUE debugging: Solve WDT startup delay, add traceback & crash report uses programming port baud rate
2018-03-24 13:32:34 -05:00
Bob-the-Kuhn
b756a15aba
another needs to be deleted
2018-03-24 10:22:03 -05:00
Bob-the-Kuhn
50c81ebe0d
remove check that always fails
2018-03-24 09:36:50 -05:00
Scott Lahteine
3ac135cef3
Enforce minimum TMC2130 / TMC2208 libs
2018-03-23 18:05:23 -04:00
Bob-the-Kuhn
8870f9b1da
Fix M503 helper functions following TMC updates ( #10197 )
2018-03-23 16:43:43 -05:00
Scott Lahteine
bb7236a750
Z correction on tool-change for all HAS_MESH ( #10199 )
2018-03-23 13:12:00 -05:00
Bob-the-Kuhn
509227fd80
change to mode 0
2018-03-23 09:37:58 -05:00
etagle
c3b23974bd
Added detection of case when no unwind tables are available
2018-03-23 05:22:45 -03:00
Scott Lahteine
ea1a83ce41
Use pgm_read_ptr for tables of pointers
2018-03-23 02:16:35 -04:00
Scott Lahteine
9da0797e29
Fix EEPROM size of tmc_hybrid_threshold
...
Followup to #10102
2018-03-23 02:08:35 -04:00
teemuatlut
daf643e1ce
[2.0.x] TMC: Match axis label order ( #10188 )
2018-03-23 01:04:12 -05:00
Roxy-3D
1628a9e864
make data declarations consistent
2018-03-22 19:25:28 -05:00
etagle
b210bdf032
Now the Crash reporter uses the configured BAUDRATE to send the report through the Programming port. And also shows the traceback of functions as discussed. For that latest feature to work, you need to compile the project with -funwind-tables and -mpoke-function-name compiler flags
2018-03-22 03:34:03 -03:00
etagle
c5730cf711
As Bob-The-Khun suggested, resetting the USB peripheral solves the huge startup delays that happen when a WDT reset happens and we are connected through the native port
2018-03-22 03:31:25 -03:00
Scott Lahteine
1cb810ff1c
[2.0.x] Automatically reset stepper timeout ( #10179 )
...
* Automatically reset stepper timeout in manage_inactivity
Any code that adds moves to the planner can skip resetting the stepper timeout. We can let `idle` / `manage_inactivity` reset the timer whenever it detects any moves in the planner.
* blocks_queued => has_blocks_queued
2018-03-21 19:30:06 -05:00
Eduardo José Tagle
97e8a6ebd9
Various fixes for DUE... ( #10152 )
...
- Watchdog reset during SD Card initialization.
- Move `DebugMonitor` to `DebugMonitor_Due.cpp`.
- Since the watchdog is enabled on boot do extra resets during init.
- Have `thermalManager` do watchdog reset before its ISR starts to prevent reset.
- Ensure that timers are stopped before reprogramming them to address tone issues.
- Improve SAM3XE reset when reflashed through the native port.
2018-03-21 19:04:45 -05:00
Roxy-3D
c3c264978f
correct truncated comment
2018-03-21 16:54:45 -05:00
Scott Lahteine
9fd1016bb1
Trust the bootloader to clear globals
2018-03-21 05:49:39 -05:00
Scott Lahteine
045ee28c50
Tweaks to M915
2018-03-21 05:15:25 -05:00
Scott Lahteine
987597532c
For MK2_MULTIPLEXER undef DISABLE_INACTIVE_EXTRUDER
...
Fix #10098
2018-03-21 04:34:50 -05:00
Scott Lahteine
ff304d3767
Allow G53 to go back to native space
2018-03-21 01:38:25 -05:00
Scott Lahteine
bc45fb6b13
Tweak use of move_z_after_probing
2018-03-21 01:25:08 -05:00
Scott Lahteine
c352954882
Allow no raise after run_z_probe in probe_pt
2018-03-21 01:24:51 -05:00
Scott Lahteine
ae39fbd646
Also suppress keepalive with suspend_auto_report
2018-03-21 00:29:09 -05:00
Scott Lahteine
8dfaf1539e
Merge pull request #10102 from thinkyhead/bf2_eeprom_M913
...
[2.0.x] More complete Trinamic driver options
2018-03-20 23:14:19 -05:00
AnHardt
837ac2fdbd
[2.0.x] Fix_Autotune_THERMAL_PROTECTION_BED_off ( #10166 )
...
- Fix Autotune Thermal Protection
- Make 2 constants in autotune configurable
2018-03-20 16:48:36 -05:00
Bob-the-Kuhn
785dbfc72d
[2.0.x] FASTIO consistency ( #10164 )
2018-03-20 16:24:50 -05:00
Bob-the-Kuhn
7308ef7809
Add conditional, give DUE SPI a unique name, fix compiler warnings ( #10168 )
2018-03-20 15:53:21 -05:00
teemuatlut
b5b39af531
[2.0.x] TMC: Fix CURRENT_STEP_DOWN ( #10170 )
2018-03-20 15:16:05 -05:00
Scott Lahteine
a5c6d3c7b8
Prevent null pointer crash in Endstops::update
...
Thanks to Evgeny Kotsuba!
2018-03-20 04:21:18 -05:00
Scott Lahteine
a46bac3100
Add 'I' parameter to M906/M913/M914; 'T' to M906/M913
2018-03-19 22:05:16 -05:00
Scott Lahteine
cfc13ed7f3
Quiet M906/M913/M914 with axes. Patch for DISTINCT_E_FACTORS.
2018-03-19 22:05:16 -05:00
Scott Lahteine
c95450016b
Improve Trinamic support in the EEPROM
2018-03-19 22:05:16 -05:00
Scott Lahteine
48d7036874
Consolidate smart stepper driver initialization
2018-03-19 22:05:16 -05:00
Bob-the-Kuhn
53362b81cc
Tone fixes/changes ( #10151 )
2018-03-19 04:48:06 -05:00
Scott Lahteine
dd2949922b
Consolidate 3-point leveling point options
2018-03-19 04:12:20 -05:00
Scott Lahteine
1d22609473
MIN_PROBE_EDGE replaces DELTA_PROBEABLE_RADIUS
2018-03-19 04:11:46 -05:00
Scott Lahteine
eaefc1e410
Add CorePQ support for BABYSTEPPING ( #10155 )
2018-03-19 02:51:40 -05:00
Scott Lahteine
72281c4ff9
Turn power off in kill instead of setting PS_ON to input
2018-03-19 02:37:55 -05:00
Scott Lahteine
9d99360912
Fix matrix.debug output
2018-03-18 20:02:20 -05:00
Eduardo José Tagle
bbfbf90797
Fix for DUE - no host support on native USB if SD card not enabled ( #10148 )
2018-03-18 19:49:51 -05:00
Scott Lahteine
772810fb24
Followup to PORTVAR patch
2018-03-18 19:23:58 -05:00
Scott Lahteine
978f342392
Reduce some tmc_util strings
2018-03-18 18:58:10 -05:00
Scott Lahteine
fbdc5ad962
Prevent lcd_update stack overflow on SD Card change
2018-03-18 18:58:10 -05:00
Scott Lahteine
c0d694d5d3
Squash UBL postscript comment
2018-03-18 18:58:10 -05:00
Scott Lahteine
93af8aa157
Fix home_delta for SENSORLESS_HOMING ( #10145 )
2018-03-17 20:52:06 -05:00
Scott Lahteine
0543362b34
Don't init the tone timer if no BEEPER_PIN
2018-03-17 18:59:43 -05:00
Scott Lahteine
c6ff39cc14
Spacing cleanup
2018-03-17 16:49:08 -05:00
Scott Lahteine
9e9e29ddf8
Einsy: Regular endstops and BLTOUCH pins
...
Based on #10131
2018-03-17 16:43:09 -05:00
Bob-the-Kuhn
c79b53d406
Merge pull request #10140 from Bob-the-Kuhn/DUE-full-speed
...
[2.0.x] DUE - add full speed USB native port option
2018-03-17 13:41:45 -05:00
Bob-the-Kuhn
7f1afbfd60
can't type
2018-03-17 13:07:49 -05:00
Bob-the-Kuhn
23760d6c14
add full speed option
2018-03-17 12:56:44 -05:00
Bob-the-Kuhn
cbcd1ed42d
full speed
2018-03-17 02:57:18 -05:00
Scott Lahteine
6689884910
Easier override of ST7920 LCD timing
2018-03-17 02:40:24 -05:00
Scott Lahteine
d603e655d3
Fix SWITCHING_EXTRUDER manual movement
2018-03-16 03:22:56 -05:00
Scott Lahteine
5f77816772
Reduce size of "only one" sanity checks
2018-03-16 02:43:02 -05:00
Scott Lahteine
8922b56b58
Fix some spelingz
2018-03-16 01:25:41 -05:00
Scott Lahteine
a6feb58837
Delta support for multiple hotends with offsets ( #10118 )
2018-03-16 00:46:42 -05:00
TheSFReader
2e43438e0c
Add C parameter to M27 to include the long filename
...
In answer to #10001
Add an option to retrieve the currently open file name (long filename if possible).
2018-03-15 23:06:18 -05:00
Scott Lahteine
2168d6ac25
Allow NULL prepend in lsDive
2018-03-15 23:06:17 -05:00
Scott Lahteine
1e946d681d
Update Marlin for newest TMC libraries
...
- TMC2130Stepper v2.2.0
- TMC2208Stepper v0.0.4
2018-03-15 22:23:31 -05:00
shaktee
63fc4a8521
BIBO2 default update and Cyclops config ( #10108 )
2018-03-15 00:16:55 -05:00
etagle
404fc94705
DUE USB CDC: Do not send any character if no program on the PC is listening to them. This avoids Marlin waiting until the user actually opens a program that is able to consume the output of Marlin
2018-03-15 00:56:28 -03:00
Scott Lahteine
4aebe3d82e
Pretty up EEPROM port args
2018-03-14 22:44:25 -05:00
Scott Lahteine
51bf3c9503
Fix E direction for MK2_MULTIPLEXER with LIN_ADVANCE
2018-03-14 07:56:18 -05:00
teemuatlut
e6dcfa64b0
Cast SERIAL_CHAR to void in M122 ( #10086 )
2018-03-14 07:09:06 -05:00
Marcio Teixeira
c24dbcbfe1
When STATUS_EXPIRE_SECONDS is 0, hide the position. ( #10081 )
...
Some users may prefer to hide the position updates on the `LIGHTWEIGHT_UI` altogether. This leads to an even less cluttered display (it also saves on SPI traffic and one byte of RAM).
2018-03-14 02:44:30 -05:00
Studiodyne
e7a61de8af
[2.0] FWRetract Reset (Best way) ( #10083 )
2018-03-14 01:35:30 -05:00
Scott Lahteine
f894209de2
Merge pull request #10093 from thinkyhead/bf2_trinamic_config
...
[2.0.x] Clean up Trinamic config options, sanity check
2018-03-14 01:16:55 -05:00
Scott Lahteine
f1327fd5f9
Use lcd_goto_previous_menu_no_defer more
2018-03-14 00:50:15 -05:00
Scott Lahteine
e7570f3195
Improve TMC config organization, naming
2018-03-14 00:18:41 -05:00
Scott Lahteine
374ea49be9
Revert marlinAnalogInputToDigitalPin
2018-03-14 00:18:40 -05:00
Scott Lahteine
34f656decd
Add TMC2208 include in tmc_util.h
2018-03-14 00:18:40 -05:00
Scott Lahteine
07cf2cd9c4
Fix sensorless_homing_per_axis compile warning
2018-03-14 00:18:40 -05:00
Scott Lahteine
b858c638ad
Fix compiler warning for HAL_ANALOG_SELECT
2018-03-13 22:33:21 -05:00
Bob-the-Kuhn
c4467da53a
Merge pull request #10063 from ejtagle/bugfix-2.0.x
...
[2.0.x] DUE - add programming capability to native port
2018-03-13 22:07:21 -05:00
Scott Lahteine
65ce0303f8
Fix MKS_12864_OLED blank issue
...
Fixes #10071
2018-03-13 04:54:23 -05:00
Scott Lahteine
36452b4d6e
Fix filename HAL/DUE/servotimers.h => ServoTimers.h
2018-03-13 01:38:37 -05:00
Scott Lahteine
14c03cb6f4
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) ( #10069 )
...
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
2018-03-13 01:15:22 -05:00
Scott Lahteine
5dec828abc
Add MKS_12864OLED to lcd_implementation_init
...
Followup to #7914
2018-03-12 08:54:17 -05:00
Scott Lahteine
468f34104b
Patch do_blocking_move_to so 'destination' can be used
2018-03-12 08:16:17 -05:00
Scott Lahteine
5b45aab262
M218: report with no parameters
2018-03-12 08:14:35 -05:00
Scott Lahteine
18de11c1ea
Followup to auto-assign of dual axis CS pins
2018-03-12 07:19:56 -05:00
ejtagle
703c8ac0ef
Added Arduino-compatible kludge to the (ATMEL supplied) SAM3X USB stack we are now using so the Native port is also usable as a programming port on Arduino DUE and derived designs
2018-03-11 15:17:55 -03:00
Scott Lahteine
28f1276286
[2.0.x] Add Z_AFTER_PROBING option ( #10058 )
...
Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
2018-03-11 13:07:55 -05:00
Scott Lahteine
dd19e74476
Cleanup trailing whitespace
...
@Bob-the-Kuhn — Please set your git options to remove trailing whitespace on commit.
2018-03-11 10:29:00 -05:00
Scott Lahteine
d0ac0151b6
Fix typo in ubl.prepare_segmented_line_to
2018-03-11 10:20:50 -05:00
Scott Lahteine
d385b9aac7
Auto-assign CS pins for X2, Y2, Z2 ( #10057 )
...
Fixes #9211
2018-03-11 08:56:13 -05:00
Scott Lahteine
bae1cb859c
Patch flush_and_request_resend for 1.1.x parity
2018-03-11 07:36:00 -05:00
Scott Lahteine
51ebdf3b7d
Finish scroll_screen with menu direction/multiplier
...
Fixes #10041
2018-03-11 04:41:12 -05:00
Bob-the-Kuhn
0d8c15c01f
restore PR 9661 files & V1 fix
2018-03-10 22:46:32 -06:00
Scott Lahteine
751785fc97
Followup to recent patches
...
- `M666` is static, not inline
- Disambiguate some stepper macros
2018-03-10 21:41:17 -06:00
Scott Lahteine
a0211f5d6c
Disambiguate else in stepper_indirection.h
2018-03-10 19:56:22 -06:00
Scott Lahteine
f003173752
Fixup M666
...
Followup to d6df032
2018-03-10 19:52:30 -06:00
Bob-the-Kuhn
bf59a4a6df
Revert "[2.0.x] DUE compatibility with shared SPI LCDs, USB mass storage, add pin defs & update examples\MakerParts\Configuration.h"
2018-03-10 17:22:20 -06:00
Sebastianv650
fd1d590726
[2.0.x] Silence M204 ( #10037 )
...
`M204` is often used by slicers to set acceleration depending on perimeter, infill, etc., so Marlin's answers are flooding the serial windows. Silence `M204` according to the philosophy that setter commands should only send a reply if no parameter is given.
2018-03-10 07:16:55 -06:00
Scott Lahteine
f10c87b442
Update Endstops class for 1.1.x parity
2018-03-10 06:57:31 -06:00
Scott Lahteine
d6df0322c2
Update M666 for XYZ dual endstops
2018-03-10 06:57:31 -06:00
Scott Lahteine
fbc41c0e98
Update Marlin G-code summary
2018-03-10 06:57:31 -06:00
Scott Lahteine
239902f861
Fix E2END and add EEPROM to Smart RAMPS
...
Reference #9983
2018-03-10 06:57:31 -06:00
Scott Lahteine
ddce486360
Merge pull request #10032 from thinkyhead/bf2_unknown_z_no_raise
...
[2.0.x] Add UNKNOWN_Z_NO_RAISE to prevent Z grinding
2018-03-10 00:57:30 -06:00
Scott Lahteine
79e6d890d5
Add UNKNOWN_Z_NO_RAISE to example configs
2018-03-10 00:17:34 -06:00
Scott Lahteine
419d12ca1b
Add UNKNOWN_Z_NO_RAISE option
...
With this option enabled, Z won't ever be raised until after `G28` has been completed, and it won't raise if Z becomes unknown. This is good for machines whose beds fall when Z is powered off.
2018-03-10 00:17:34 -06:00
Scott Lahteine
3b4c89e4b5
Move do_probe_raise closer to set_probe_deployed
...
…and limit the raise to Z_MAX_POS
2018-03-10 00:17:34 -06:00
Scott Lahteine
2908e76151
Fix position_is_reachable_by_probe typo, add comment
...
Fix #10029
2018-03-10 00:15:41 -06:00
Roxy-3D
26dc594ebb
prevent steppers from turning off during manual probes
2018-03-10 00:15:41 -06:00
Bob-the-Kuhn
d8eadf3796
fix ubl_G29.cpp Travis error
2018-03-09 23:59:30 -06:00
Bob-the-Kuhn
914bb80bde
removed SDSS init
...
added device & comm drivers for shared SPI LCDs
mistyped some updates in ultralcd_impl_DOGM.h
remove unwanted changes in onfiguration.h
still can't type
Update HAL_LCD_class_defines.h
include USB mass storage & misc
2018-03-09 23:06:11 -06:00
Scott Lahteine
6d9ea7e184
Fix position_is_reachable_by_probe typo, add comment
...
Fix #10029
2018-03-09 21:12:11 -06:00
Roxy-3D
646dd5554c
prevent steppers from turning off during manual probes
2018-03-09 17:56:00 -07:00
Scott Lahteine
161ff9ff35
Fix UPDATE_ENDSTOP for CorePQ compatibility
...
Fixes #9939
2018-03-09 08:54:48 -06:00
Scott Lahteine
49ca67202f
Patch configuration_store for extra serial port
...
Fix #9948
2018-03-09 07:42:27 -06:00
Scott Lahteine
cc59ac4603
Fix _tmc_say_axis string address
...
Fixes #10003
2018-03-09 06:10:11 -06:00
Scott Lahteine
16a8edc5f0
Add more delay before pulse off in Linear Advance ISR
...
A capital idea from https://github.com/MarlinFirmware/Marlin/pull/9914#issuecomment-371614153
2018-03-09 05:26:29 -06:00
Scott Lahteine
dfd5d2fe75
Have position_is_reachable_by_probe use the whole bed ( #10020 )
...
Previously `position_is_reachable_by_probe` was limited to the area specified for `G29` mesh leveling (even if leveling was disabled). This change will properly consider the entire bed area so that `G30` and other non-leveling probing may take place.
2018-03-09 03:37:30 -06:00
Bob-the-Kuhn
67a17446f2
Fix DUE incompatible enum type specification ( #10017 )
2018-03-09 02:17:57 -06:00
Bob-the-Kuhn
3c58ca181c
[2.0.x] Correct step pulse width on LPC1768, DUE & Teensy35_36 ( #10016 )
2018-03-09 02:11:28 -06:00
Scott Lahteine
e297748b22
Apply const, safe_delay in servo.*
2018-03-08 19:31:32 -06:00
Scott Lahteine
3c2bfa5e53
Update powersupply_on in power_on/off ( #10015 )
...
Fix #10004
2018-03-08 18:56:47 -06:00
Scott Lahteine
42608b1925
Init old_red to 127 to ensure initial change
...
Fix #10012
2018-03-08 18:28:33 -06:00
Scott Lahteine
317673fec3
Init watchdog last in setup()
2018-03-08 17:34:50 -06:00
Scott Lahteine
8d32fd997f
Wrap NORM_E_DIR/REV_E_DIR macros in do{}while(0)
2018-03-08 16:20:24 -06:00
Scott Lahteine
1913c37a91
Tweak to manual move eindex arg
2018-03-08 16:20:24 -06:00
Scott Lahteine
98d48fc731
Followup to HAL_timer_restrain
...
Followup to #9985
2018-03-07 22:18:37 -06:00
Scott Lahteine
03e3011332
Fix compile error with MAX_MESSAGE_LENGTH
...
Fix #9988
2018-03-07 21:57:01 -06:00
Bob-the-Kuhn
6b4a928145
2uS default step pulse ( #9989 )
2018-03-07 21:11:01 -06:00
Scott Lahteine
ca577c1638
Fix up various spacing, comments, and typos
2018-03-07 21:09:08 -06:00
Scott Lahteine
d45f19d385
Remove Unicode from var name
2018-03-07 19:08:44 -06:00
Scott Lahteine
224688cc3b
Fix for unicode-ignorant gcc preprocessor
2018-03-07 18:34:07 -06:00
Chris Pepper
a1a88ebabc
HAL function to ensure min stepper interrupt interval ( #9985 )
2018-03-07 17:53:25 -06:00
Scott Lahteine
be0e100fed
Fix sd subdirectory encoder position
...
Followup to 7e386c7
2018-03-07 16:54:19 -06:00
Bob-the-Kuhn
04dedc7ed8
always completely initialize display ( #9981 )
2018-03-07 16:40:59 -06:00
Scott Lahteine
0149680f54
Fix compile error with char LCD
2018-03-07 16:25:37 -06:00
Scott Lahteine
9515e5aefb
Fix LA_active_extruder (static)
2018-03-07 05:49:20 -06:00
Scott Lahteine
e5ec793f7e
Wrap stepper indirection macros
2018-03-07 05:42:45 -06:00
Sebastianv650
5b85464791
Fix for LA ( #9964 )
...
Missed in the original LA 1.5 PR: eISR has to use a local copy of
current_block->use_advance_lead because it might still run wenn the last
block has been set to NULL.
2018-03-07 05:33:13 -06:00
Scott Lahteine
7e386c7e98
Fix encoder position for sddirectory
2018-03-07 05:23:03 -06:00
Scott Lahteine
1d604be671
Suspend auto-report during UBL map output
2018-03-07 02:00:19 -06:00
Scott Lahteine
eb212ae073
Add suspend_auto_report flag to suppress auto-report
2018-03-07 01:57:09 -06:00
Scott Lahteine
ffbf63e6af
Add HAS_TEMP_SENSOR conditional
2018-03-07 01:53:50 -06:00
Scott Lahteine
94f5204629
Move AUTO_REPORT_SD_STATUS to SDSUPPORT block
2018-03-07 01:50:30 -06:00
Scott Lahteine
22a017a856
Rebuild SD file sort array on Stop SD Print ( #9976 )
...
Thanks Chuck Hellebuyck.
2018-03-07 01:42:11 -06:00
Scott Lahteine
920d92aa46
Merge pull request #9974 from thinkyhead/bf2_tmc_util_progmem
...
[2.0.x] Move tmc_util.* extended_axis_codes to PROGMEM
2018-03-07 00:16:50 -06:00
Scott Lahteine
b198b49d15
Followup to AUTO_REPORT_SD_STATUS
...
Followup to #9832
2018-03-07 00:13:42 -06:00
Scott Lahteine
2057177184
Make enums into implicit char
2018-03-06 23:39:56 -06:00
Scott Lahteine
e28e3bb532
Move extended_axis_codes to PROGMEM
2018-03-06 22:21:24 -06:00
Scott Lahteine
ca0def766e
LIN_ADVANCE single stepper optimization
2018-03-06 19:26:54 -06:00
Scott Lahteine
8291ae34f2
Support duplication mode in LIN_ADVANCE
2018-03-06 19:12:23 -06:00
Scott Lahteine
b08ec22fe1
Show E0-E4 in monitor_tmc_driver output ( #9969 )
...
Fix #9966
2018-03-06 19:01:07 -06:00
Marcio Teixeira
fd883c909a
Improvements to Lightweight ST7920 status screen. ( #9952 )
...
- Show units on lightweight status screen.
- Fixed progress bar so it works with M73
2018-03-06 01:49:36 -06:00
Scott Lahteine
0dd1c4458d
Put more code between pulse start and stop ( #9959 )
2018-03-05 23:06:57 -06:00
Scott Lahteine
f9cafc4001
Fix menu highlight glitch, tweak scrolling code ( #9957 )
2018-03-05 23:05:15 -06:00
Scott Lahteine
bf9fc8ac0e
M851 - report only without parameters
2018-03-05 02:11:50 -06:00
Scott Lahteine
eb867817b5
Prevent filament runout false positives ( #9946 )
2018-03-05 01:49:30 -06:00
Scott Lahteine
36262a0479
Use static classes for job timers ( #9938 )
2018-03-04 21:23:43 -06:00
Scott Lahteine
930720bbbb
Fix broken reverse planner ( #9943 )
...
From #9914 by @Sebastianv650
2018-03-04 21:19:06 -06:00
Bob-the-Kuhn
025118da3e
Init print_job_timer in setup() instead of "early" ( #9937 )
2018-03-04 16:23:44 -06:00
Scott Lahteine
beeed580b8
Implement digipots for MKS SBASE ( #9927 )
...
Fix #9477
2018-03-04 15:14:47 -06:00
Scott Lahteine
07ae23fe14
No pulse delay on last e_steps in advance isr
2018-03-04 15:06:31 -06:00
Scott Lahteine
881529a401
Fix #9904 - toDigital should show 00-99 hours
2018-03-04 04:34:39 -06:00
Scott Lahteine
ed758de80d
tweak comment in stepper.cpp
2018-03-04 04:03:23 -06:00
Scott Lahteine
d1dc863962
autotemp_factor is not value_celsius_diff
...
See https://github.com/MarlinFirmware/Marlin/issues/9852#issuecomment-369861822
2018-03-03 23:27:54 -06:00
Thomas Moore
f3914a432e
Clear retracted status when homing the Z axis
2018-03-03 23:18:40 -06:00
Scott Lahteine
6d7f4f84e2
Add board MKS_BASE_HEROIC ( #9926 )
...
Followup to #9008
- Don't define micro-stepping pins for boards that lack them.
- Allow setting of 128 microsteps with `M350`.
2018-03-03 23:14:52 -06:00
Scott Lahteine
649f375494
Fix: M112 calling kill from interrupt ( #9923 )
...
Fix #9906
2018-03-03 23:14:01 -06:00
Scott Lahteine
c37b3f995a
Sanity-check some graphical LCD-only options
2018-03-03 20:31:59 -06:00
Scott Lahteine
a2a672449a
Updated boot screen description
2018-03-03 20:04:17 -06:00
Scott Lahteine
61620cbd15
Tweak M211
2018-03-02 02:20:40 -06:00
Scott Lahteine
6e08ddce6e
Correct M401 / M402 description
2018-03-01 19:10:36 -06:00
Studiodyne
23a576faf7
[2.0] Fix for FW retract ( #9878 )
2018-03-01 15:15:40 -06:00
Ben Lye
461c8ef834
Fix DIGITAL_PIN_TO_ANALOG_PIN macro for Atmega1284p ( #9881 )
2018-03-01 15:13:57 -06:00
Scott Lahteine
88b6a15b47
Update M900 verbiage
2018-03-01 15:11:31 -06:00
Ben Lye
e2df286444
Update pinsDebug.h ( #9874 )
...
Fix display of analog input value.
2018-03-01 04:51:36 -06:00
Scott Lahteine
91db7930dc
Drop SCARA_FEEDRATE_SCALING
...
The updated planner takes the length of the move, so this pre-calculation is no longer needed.
2018-03-01 04:30:41 -06:00
Bob-the-Kuhn
c1f4112bdc
[2.0.x] Add 1284 support & misc. bug fixes ( #9864 )
2018-03-01 03:07:39 -06:00
Scott Lahteine
118899357d
Add sanity checks to Linear Advance 1.5 ( #9873 )
2018-03-01 02:10:43 -06:00
Scott Lahteine
1746749361
Followup to #9868
2018-03-01 01:53:12 -06:00
Scott Lahteine
a446433c87
Fix SENSORLESS_HOMING for Core Kinematics ( #9868 )
2018-03-01 01:37:31 -06:00
Scott Lahteine
2d1233b86c
Fix lcd_quick_feedback call for BTN_BACK
2018-02-28 20:24:11 -06:00
AnHardt
eb8b758226
Fix some mapper, charsize problems ( #9866 )
2018-02-28 18:57:05 -06:00
Scott Lahteine
8bffb26c23
Fix manual move position display
...
Manual moves now correctly include the workspace offset.
2018-02-28 17:33:23 -06:00
Scott Lahteine
8c03ce4d80
Fix Z safe homing sanity check for no probe
...
Fix #9851
2018-02-28 05:28:35 -06:00
Scott Lahteine
c471389afb
Add Einsy Rambo pins ( #9850 )
2018-02-28 04:16:12 -06:00
Zachary Hill
c22f8dd660
Get duration_t in printcounter.h for its clients ( #9843 )
2018-02-28 04:15:29 -06:00
Scott Lahteine
24b9c1923f
ubl G29 tweaks
2018-02-28 03:40:06 -06:00
Scott Lahteine
bd0967ad87
Fix BTN_BACK
...
Followup to #9835
2018-02-28 03:26:28 -06:00
Scott Lahteine
d9a98b5814
Russian language update
...
From #9849
2018-02-28 03:07:39 -06:00
Ben Lye
461cb22069
Fix Zonestar / ADC keypad with RAMPS. ( #9840 )
2018-02-28 00:07:50 -06:00
Scott Lahteine
35ec67885a
Add support for BACK button (RADDS) ( #9835 )
2018-02-26 22:52:57 -06:00
Scott Lahteine
0bc4c216ac
Patch up pinsDebug pins
2018-02-26 19:32:48 -06:00
Scott Lahteine
cd7dc49527
Fix CR-10 status screen missing commas
...
Fix #9660
2018-02-26 15:52:50 -06:00
geigerg
4817c78a65
Add files via upload ( #9828 )
2018-02-26 15:44:01 -06:00
TheSFReader
eb079959fb
Report sd card progress [FR] #9751 ( #9832 )
...
* SD Status auto-report feature
Feature Request #9751
2018-02-26 15:38:27 -06:00
Scott Lahteine
7bdb98c946
Fix #9826 . Solution by @gloomyandy
2018-02-26 15:02:19 -06:00
Scott Lahteine
02474a321a
Fix SDSUPPORT (and indentation)
...
Based on https://github.com/MarlinFirmware/Marlin/issues/8746#issuecomment-368471901 by @benlye
2018-02-26 14:40:40 -06:00
Scott Lahteine
cfdcf91df5
Fix compile error with initTone
2018-02-26 01:49:48 -06:00
Scott Lahteine
ae1a2ff16f
Pins parity with 1.1.x
2018-02-26 01:17:50 -06:00
Roxy-3D
306f44198e
Prevent serial buffer overrun in Pronterface
...
75ms might be excessive... But I know people are seeing problems with PronterFace as the client...
2018-02-25 23:50:44 -06:00
Scott Lahteine
966d9af98a
Mesh export in Bilinear + UBL M503
2018-02-25 23:25:39 -06:00
Scott Lahteine
8d5a77001e
EEPROM parity with 1.1.x
2018-02-25 23:03:09 -06:00
Scott Lahteine
2228dff3ea
ubl.h compile flags from 1.1.x
2018-02-25 23:03:08 -06:00
Sebastianv650
cb4cb86d80
Useless line removed ( #9814 )
...
nextAdvanceISR is set in the next if structure in every possible
situation, so it's useless to set it once more before.
2018-02-25 21:20:37 -06:00
Scott Lahteine
f2c0ed193d
Add tone support for Due ( #9807 )
2018-02-25 10:48:14 -06:00
Scott Lahteine
0557ab5780
Fix CONFIG_ECHO_START bug
...
In reference to #9633
2018-02-25 05:34:52 -06:00
Scott Lahteine
61688233c7
HAL style tweak
2018-02-25 05:00:44 -06:00
Scott Lahteine
19ba91f77a
Fix lcd_custom_bootscreen compiler warning
2018-02-25 04:38:17 -06:00
Scott Lahteine
f3dbe19669
Tweaks to HAL codestyle
2018-02-25 04:38:17 -06:00
Scott Lahteine
54c65fc3cb
Standardize LCD buzz defaults
2018-02-24 22:58:22 -06:00
Scott Lahteine
4953fb1c88
Standardize encoder defaults
2018-02-24 22:34:45 -06:00
Scott Lahteine
078627f805
[2.0.x] Creality Ender-4 configuration ( #9803 )
...
* Move Creality Ender-2 configurations
* Add Creality Ender-4 configurations
2018-02-24 22:11:11 -06:00
Scott Lahteine
5684beae90
Bring some configs up to speed
2018-02-24 21:56:27 -06:00
UtterlyD
813f9f3082
[bugfix_2.0.x] - LIN_ADVANCE V1.5 stepper.cpp ( #9797 )
...
Removal of obsolete (i) from port of LIN_ADVANCE from V1.1.x to V2..0.x.
2018-02-24 16:37:23 -06:00
Scott Lahteine
3f89bbeab5
Drop a conditional only used once
2018-02-24 16:35:31 -06:00
Scott Lahteine
689bc99402
Correction to acceleration
2018-02-24 11:09:36 -06:00
Roxy-3D
92c8efdc96
Change Folger Tech i3-2020 defaults
2018-02-24 10:29:24 -06:00
Scott Lahteine
2024775e07
Spanish (UTF8) Language ( #9786 )
...
From #7314 by @MrAmericanMike
2018-02-23 20:24:02 -06:00
Scott Lahteine
43ff15244d
Fix a progress bar condition
2018-02-23 19:43:44 -06:00
Scott Lahteine
b8485528b2
Prettify LCD_PROGRESS_BAR options
2018-02-23 19:19:57 -06:00
Zachary Hill
4d588b2d6a
Further fix of LCD_PROGRESS_BAR ( #9783 )
2018-02-23 18:53:04 -06:00
Scott Lahteine
e0227f2110
Fix *_CS_PIN for RAMPS_FD
...
Fix #9778
2018-02-23 14:29:57 -06:00
Scott Lahteine
e65a853c59
Fix LCD_PROGRESS_BAR
...
Fix #9208
2018-02-23 14:05:10 -06:00
Scott Lahteine
07d7e8aa1b
Merge pull request #9775 from thinkyhead/bf2_g28_restore_leveling
...
[2.0.x] Add RESTORE_LEVELING_AFTER_G28 option
2018-02-23 13:43:22 -06:00
Scott Lahteine
e749945317
Un-pause print on cancel ( #9780 )
2018-02-23 13:42:15 -06:00
Scott Lahteine
17d984eab3
Add RESTORE_LEVELING_AFTER_G28 to example configs
2018-02-23 13:38:54 -06:00
Scott Lahteine
b2cf253a13
Add RESTORE_LEVELING_AFTER_G28 option
2018-02-23 13:38:54 -06:00
Scott Lahteine
65519263f4
Fix broken LEVEL_BED_CORNERS
...
Fix #8805
2018-02-23 09:13:34 -06:00
Scott Lahteine
8f9262f3fe
Fix path to _Statusscreen.h
2018-02-23 09:06:06 -06:00
Scott Lahteine
007c56f453
Fix HAL_STM32F1/endstop_interrupts.h
...
In response to https://github.com/MarlinFirmware/Marlin/issues/7076#issuecomment-367556982
2018-02-23 02:07:34 -06:00
Scott Lahteine
0542b03750
Fix bootscreen include path
...
Fix #9759
2018-02-23 01:59:35 -06:00
Scott Lahteine
2bd252b501
[2.0.x] LIN_ADVANCE v1.5 ( #9712 )
2018-02-23 00:53:29 -06:00
Scott Lahteine
90fa423737
Preliminary cleanup of #include structure ( #9763 )
2018-02-23 00:52:52 -06:00
Scott Lahteine
a6b7e721cf
Slovak language update
2018-02-23 00:49:07 -06:00
Scott Lahteine
2c9775313a
Fix Z position on HD44780
...
Fix #9732
2018-02-23 00:42:42 -06:00
Studiodyne
9c9cd54ef3
Add Z Fade Height edit to UBL and Tune submenus ( #9738 )
2018-02-23 00:29:58 -06:00
Scott Lahteine
3851ffce0f
Merge pull request #9637 from marcio-ao/pr-lite-st7920-status
...
[2.0.x] Light-weight status screen for ST7920 based printers
2018-02-22 23:55:02 -06:00
Scott Lahteine
5f8b2c2ff0
More descriptive environment error message
2018-02-22 23:34:49 -06:00
Scott Lahteine
b17982bde9
Merge pull request #9769 from teemuatlut/bf2_compile_fixes
...
[2.0.x] Fix compiling with M600 and runout sensor
2018-02-22 22:52:31 -06:00
Scott Lahteine
799e3b2b40
LPC1768 HAL formatting/comments
2018-02-22 14:36:17 -06:00
teemuatlut
5968a3e60e
Add ADVANCED_PAUSE_FEATURE include
2018-02-22 20:28:46 +02:00
teemuatlut
93cc3a8492
Make used methods public
2018-02-22 20:26:14 +02:00
Marcio Teixeira
13176dfe2f
Merge remote-tracking branch 'origin/pr-lite-st7920-status' into pr-lite-st7920-status
2018-02-22 08:02:31 -07:00
Scott Lahteine
424b9a83cd
Slovak language update
...
From @rmoravcik at #9760
2018-02-22 03:00:47 -06:00
Scott Lahteine
e75ccfd727
Hatchbox Alpha Config with E3Dv6 ( #9762 )
2018-02-22 02:57:48 -06:00
Scott Lahteine
556abc0888
Add LIGHTWEIGHT_UI to example configs
2018-02-22 00:10:43 -06:00
Marcio Teixeira
532bb3aaa1
Lightweight status screen for ST7920
...
- This status screen uses the ST7920 character generator to greatly
reduce SPI traffic and MCU load when updating the status screen.
- Has been tested with the RepRapDiscount Full Graphics Smart Controller
but should work with any LCD that uses an ST7920 or fully compatible
controller.
2018-02-22 00:10:43 -06:00
Scott Lahteine
59c98d6fd5
Hephestos2 heated bed kit for all ( #9757 )
2018-02-21 22:27:09 -06:00
Scott Lahteine
8c1a82c327
Merge pull request #9753 from ldkraemer/BF2CR-10Bootscr
...
[2.0.x] Creality CR-10mini configuration
2018-02-21 20:29:36 -06:00
Scott Lahteine
72f63a4980
Fix DOGM progress bar with LCD_SET_PROGRESS_MANUALLY
2018-02-21 19:47:04 -06:00
ldkraemer
6c3162f9c6
Add CR-10 Mini configuration
2018-02-21 19:08:42 -06:00
ldkraemer
4431f4deb8
Add CR-10S _Bootscreen.h
2018-02-21 18:55:14 -06:00
Marcio Teixeira
e7f329edb2
Added bed corners to bed icon.
...
- This makes it look less like a dash (idea stolen from cjsoong).
2018-02-21 15:31:56 -07:00
Marcio Teixeira
e84a5545e1
Removed unnecessary extended mode switch.
...
- This will slightly reduce the SPI requirements for
updating the progress bar.
2018-02-21 15:12:11 -07:00
Scott Lahteine
343c17d5b3
Reduce Creality3D bootscreens flash usage ( #9752 )
2018-02-21 16:08:52 -06:00
Scott Lahteine
63bc6ade4f
Fix pinsDebug compile error
2018-02-21 14:28:58 -06:00
Roxy-3D
d504bbbfa4
Fix botched check for being off the mesh...
2018-02-21 14:28:58 -06:00
Marcio Teixeira
716a22498f
Changed temp type from uint8_t to int16_t
...
- Also deleted old implementation files which had been renamed.
2018-02-21 10:15:55 -07:00
Scott Lahteine
7d8c6b3f3c
Add 20x4 option for Sainsmart LCD ( #9740 )
2018-02-21 00:46:25 -06:00
Scott Lahteine
1d7f5be0ff
quick_home_xy sensorless homing
2018-02-20 20:52:48 -06:00
Scott Lahteine
eb182c08af
Merge pull request #9733 from thinkyhead/bf2_random_fixup_branch
...
[2.0.x] Drop HAL_timer_set_count
2018-02-20 17:03:18 -06:00
Kevin
03b48df7bb
RADDS: Add EEPROM Size ( #9737 )
...
needed for UBL
2018-02-20 16:24:29 -06:00
Scott Lahteine
9f0907d40c
Fix big edit font width calculation
...
Fix #9685
2018-02-20 16:24:23 -06:00
Marcio Teixeira
9d5968e8ec
Fixed dual-extruder in Lightweight UI.
...
- Moved bed icon down when the machine is configured with two nozzles.
2018-02-20 13:34:34 -07:00
Scott Lahteine
4303f2e377
Fix MALYAN_LCD message bugs
...
Fix #9711
Replacing #9731
2018-02-20 05:40:19 -06:00
Scott Lahteine
12c5fdfdb5
Fix CYCLES_PER_MICROSECOND conflict on STM32F1
2018-02-20 03:10:39 -06:00
Scott Lahteine
a810e585db
Drop HAL_timer_set_count
2018-02-20 03:10:39 -06:00
Bob-the-Kuhn
a823b801b8
Merge pull request #9729 from Bob-the-Kuhn/U8G-compile-error-2.0.x
...
[2.0.x] Move #include <U8glib.h> in ultralcd_st7920_u8glib_rrd_AVR.cpp (fix bug introduced in PR #9624 )
2018-02-19 18:36:23 -06:00
Bob-the-Kuhn
47d529aac5
move #include <U8glib.h>
2018-02-19 17:39:40 -06:00
Marcio Teixeira
aada1e698f
Removed unused configuration options.
2018-02-19 16:14:33 -07:00
Marcio Teixeira
c7513eb032
Merge branch 'pr-lite-st7920-status' of github.com:marcio-ao/Marlin into pr-lite-st7920-status
2018-02-19 15:38:13 -07:00
Scott Lahteine
73cd34b121
Finish AUTO_POWER_CONTROL implementation
...
Followup to #9503
2018-02-19 16:12:04 -06:00
Scott Lahteine
fc460fff94
Extend menu items for SWITCHING_EXTRUDER
...
Reference #5367
2018-02-19 11:12:42 -06:00
Scott Lahteine
c4ec01d59b
Conditionals for SWITCHING_EXTRUDER
...
In reference to #5367 . SWITCHING_EXTRUDER was not fully implemented for EXTRUDERS > 2.
2018-02-19 10:59:47 -06:00
Scott Lahteine
d4e4fe40e0
Add SENSORLESS_HOMING delay to quick_home_xy
...
Fix #9471
2018-02-19 10:12:16 -06:00
Scott Lahteine
25e3e62354
Null-terminate lcd_status_message
2018-02-19 10:12:16 -06:00
Scott Lahteine
a11fcd46a2
Merge pull request #9699 from Studiodyne/Studiodyne-filamentMulti
...
[2.0.x] Support multiple filament runout sensors
2018-02-19 08:42:39 -06:00
Scott Lahteine
b3deadd898
Don't raise FIX_MOUNTED_PROBE on stow
...
Reference #9336
2018-02-19 08:36:43 -06:00
Scott Lahteine
a74cece6d0
CR-10 Bootscreen
...
From @plainpylut in #9660
2018-02-19 08:07:08 -06:00
Scott Lahteine
8733d5a296
Add NUM_RUNOUT_SENSORS to example configs
2018-02-19 07:02:50 -06:00
Studiodyne
d3ca82d8c2
Support for multiple filament runout sensors
2018-02-19 07:02:50 -06:00
Scott Lahteine
0106c3e476
Style tweak in MarlinSerialUSB_Due.h
2018-02-19 06:58:26 -06:00
Scott Lahteine
3d1692d1fd
Fix X2 enable with X_DUAL_STEPPER_DRIVERS
...
From #9286
2018-02-18 22:50:47 -06:00
Scott Lahteine
c241da32e8
stepper.h parity with 1.1.x
2018-02-18 22:50:38 -06:00
Scott Lahteine
3af988a7f3
Add sensorless homing delay to home_z_safely
...
Based on #9705
2018-02-18 19:28:40 -06:00
Scott Lahteine
ca55f2927a
Pulldown pin mode support ( #9701 )
...
Implemented for LPC1768.
2018-02-18 19:26:23 -06:00
Scott Lahteine
aef9e036bf
More overridable FIL_RUNOUT_PIN
2018-02-18 04:43:15 -06:00
Scott Lahteine
79272f98fc
Proposed changes to ST7920 lightweight status screen
2018-02-18 02:47:31 -06:00
Marcio Teixeira
24eb275b99
Added a light-weight status screen for the ST7920
...
- The status screen uses the ST7920 character generator to greatly
reduce SPI traffic and MCU load when updating the status screen.
- Has been tested with the RepRapDiscount Full Graphics Smart Controller
but should work with any LCD that uses an ST7920 or fully compatible
controller.
2018-02-18 02:29:45 -06:00
Scott Lahteine
a6563df705
Sync pinsDebug_list.h between 1.1.x and 2.0.x ( #9693 )
2018-02-18 02:25:32 -06:00
Scott Lahteine
bab0e975c8
The ENDER can use BOARD_MELZI_CREALITY ( #9692 )
2018-02-18 02:24:39 -06:00
Scott Lahteine
83d7e95de0
Add MSG_THERMAL_RUNAWAY_BED ( #9691 )
2018-02-18 02:23:55 -06:00
Scott Lahteine
8ffa0b24a4
Strip excess G28 debug logging
2018-02-18 01:11:41 -06:00
Kevin
9019ea0fce
Option to force X or Y to home first when homing the other axis
2018-02-18 01:11:41 -06:00
Scott Lahteine
60fc372211
Add CODEPENDENT_XY_HOMING to example configs
2018-02-18 00:46:04 -06:00
Scott Lahteine
da7c51d820
Space out some pins lines
2018-02-17 22:53:58 -06:00
Bob-the-Kuhn
e05673a379
[2.0.x] VIKI2 & RE_ARM changes ( #9686 )
...
* VIKI2 & RE_ARM changes
1. Remove `DISABLED(SDSUPPORT)` from ST7565 in `ultralcd_impl_DOGM.h`. These LCDs share pins with the SD card and can run at the SD card rates.
2. Add SDSS definition to `pins_RAMPS_RE_ARM.h`. Apparently the SDSS definition in `pins.h` is being processed before the one in `spi_pins.h` which resulted in not being able to read the SD card.
2018-02-17 16:41:36 -06:00
Scott Lahteine
7a381366aa
Merge pull request #9208 from benlye/benlye-m73
...
[2.0.x] Allow M73 without SDSUPPORT
2018-02-17 15:50:11 -06:00
Scott Lahteine
7d093edc18
Add Tronxy XY100 configuration
...
Based on #9674
2018-02-17 15:48:32 -06:00
Scott Lahteine
472229b974
Fix #9681
2018-02-17 08:28:12 -06:00
Scott Lahteine
f6cc89ec7c
LCD_PROGRESS_BAR w/out SDSUPPORT for character LCD
2018-02-17 08:17:22 -06:00
blye
330437ad7c
Update LCD_SET_PROGRESS_MANUALLY in configs
2018-02-17 08:12:10 -06:00
blye
168af8bacb
Allow LCD_SET_PROGRESS_MANUALLY without SDSUPPORT
2018-02-17 07:54:24 -06:00
Scott Lahteine
bf5df306e1
Fix compile error with SHOW_BOOTSCREEN disabled
...
Fix #9530
Fix #9524
2018-02-17 00:52:08 -06:00
Scott Lahteine
3021058e6d
Fix non-UTF8 Czech language
2018-02-16 22:23:29 -06:00
Scott Lahteine
bd54ce830a
Include utility.h in neopixel.cpp
2018-02-16 22:19:34 -06:00
Scott Lahteine
ff90cb409e
No space for E2 with ReARM+RAMPS
...
Addressing #9474
2018-02-16 21:37:26 -06:00
Scott Lahteine
d7f82c8ddf
Drop extra avr/pgmspace include in _Bootscreen.h
...
Addressing #9441
2018-02-16 18:36:35 -06:00
Scott Lahteine
1bf2b1e475
Use serial macro in sd_mmc_spi_mem.cpp for Due
2018-02-16 17:57:24 -06:00
Scott Lahteine
241e55ef3b
Apply SERIAL_FLUSH macro
2018-02-16 17:32:12 -06:00
Scott Lahteine
1f8f8c9104
Merge pull request #9657 from petrzjunior/bugfix-2.0.x
...
[2.0.x][Language] Update Czech (Advanced pause...)
2018-02-16 02:54:06 -06:00
Thomas Moore
cff62042ee
Fix LCD manual movement on kinematic machines ( #9655 )
2018-02-16 02:34:36 -06:00
teemuatlut
749bc42aa9
TMC SGT is int8 ( #9651 )
2018-02-16 02:19:33 -06:00
Bob-the-Kuhn
2d749d490b
Fix / complete USE_CONTROLLER_FAN ( #9666 )
2018-02-16 02:18:50 -06:00
Scott Lahteine
08d685c97a
Followup to 21e60fd
2018-02-16 02:09:17 -06:00
Scott Lahteine
c49844df66
!ENABLED => DISABLED
2018-02-16 01:51:34 -06:00
Scott Lahteine
304e0f8945
Followup to 21e60fd
...
`ENABLED` only works for flag-type options. Floats must use `#ifdef`.
2018-02-15 22:24:23 -06:00
Scott Lahteine
6a70a4fbb3
Fix G26 circles ( #9627 )
...
Easier to configure. Catch an odd divisor.
2018-02-15 22:11:26 -06:00
Bob-the-Kuhn
349dafa728
config update (set to -1)
2018-02-15 21:42:54 -06:00
Roxy-3D
21e60fd3ed
Allow user to control Z-Height correction for off mesh movements ( #9661 )
2018-02-15 15:07:42 -06:00
Petr Zahradník
5d9e16ea49
Update Czech advanced pause
2018-02-15 20:22:22 +01:00
Roxy-3D
c78e1c0f23
Fix G26 Circles... ( #9641 )
...
* Fix G26 Circles...
2018-02-15 11:15:15 -06:00
Bob-the-Kuhn
b648999528
Merge pull request #9624 from Bob-the-Kuhn/RRD-8-bit-code-to-2.0.x
...
[2.0.x] Add delays to AVR driver for RRD Full Graphic Smart Controller
2018-02-14 22:43:17 -06:00
Marcio Teixeira
8db67d1647
Fixed compilation when using avr-gcc
...
- avr-gcc is more strict than the Arduino IDE, it seems.
2018-02-14 15:51:25 -07:00
Marcio Teixeira
f05bd7f082
Added files missing from earlier commit.
2018-02-14 14:51:35 -07:00
Marcio Teixeira
4880ac6533
Added a light-weight status screen for the ST7920
...
- The status screen uses the ST7920 character generator to greatly
reduce SPI traffic and MCU load when updating the status screen.
- Has been tested with the RepRapDiscount Full Graphics Smart Controller
but should work with any LCD that uses an ST7920 or fully compatible
controller.
2018-02-14 14:43:54 -07:00
Roxy-3D
3d74ff3c87
Cartesian UBL systems should not use SEGMENT_LEVELED_MOVES
...
There is significant downside to breaking up the long line segments on UBL Cartesian machines. It adds a lot of extra computation but worse... It cuts out all of UBL's off mesh Z-Height correction checks. There have been a large number of people complaining about the nozzle going to infinity or crashing into the bed lately. They are being caused by
```
void unified_bed_leveling::line_to_destination_cartesian()
```
not watching over the segments being queued up for movement.
2018-02-14 14:16:12 -06:00
Scott Lahteine
5dc04c5201
Fix #9361
2018-02-14 07:48:20 -06:00
AnHardt
133b38b93b
Complete M48 description ( #9631 )
2018-02-14 05:17:58 -06:00
Scott Lahteine
93c0198b2d
Init LCD welcome message programmatically
2018-02-14 05:09:44 -06:00
Scott Lahteine
67a4cc610b
French update
...
Based on #9610
2018-02-14 04:15:47 -06:00
Scott Lahteine
e7b50c89b0
Fix #9201
...
FILAMENT_LCD_DISPLAY can work with SDSUPPORT
2018-02-14 03:29:47 -06:00
Scott Lahteine
8d71ad37cb
flush comment to match 1.1.x
2018-02-14 02:56:18 -06:00
Scott Lahteine
272f132b82
Remove stray ` from STM32F1 HAL
...
As noted in #8585
2018-02-14 01:06:37 -06:00
Scott Lahteine
5b70d3da1c
Update DIGIPOT_I2C_MOTOR_CURRENTS comments
2018-02-13 22:54:12 -06:00
Scott Lahteine
2ec65051fd
Fix serial comment sp.
2018-02-13 22:40:56 -06:00
Bob-the-Kuhn
9a423e9a89
tested
2018-02-13 21:59:18 -06:00
Scott Lahteine
d741bcf8a9
Tweak boards spacing
2018-02-13 03:49:28 -06:00
Scott Lahteine
f8912bb19f
French update
...
Based on #9590 by @studiodyne
2018-02-12 01:07:47 -06:00
Scott Lahteine
e6b8207b03
Restore welcome message
2018-02-12 01:02:30 -06:00
Scott Lahteine
89165326b4
Cleanup after vim and vigor
2018-02-11 06:07:30 -06:00
Scott Lahteine
423bf9955e
Set Megatronics baud rate to 115200
...
Fix #9092
2018-02-11 03:43:36 -06:00
Scott Lahteine
377108619b
Fix plan_arc clockwise (G2)
...
Fix #9482
2018-02-11 03:34:25 -06:00
Scott Lahteine
378867d894
Update PB Rev.F pins
2018-02-11 01:45:37 -06:00
Scott Lahteine
8e0c107545
Have Kossel Pro use Z_MIN_PROBE_ENDSTOP ( #9586 )
2018-02-11 01:41:40 -06:00
Scott Lahteine
03d790451f
[2.0.x] HAL timer set/get count => set/get compare ( #9581 )
...
To reduce confusion over the current timer count vs. the compare (aka "top") value. Caution: this re-uses the function name, changing its meaning.
2018-02-10 20:42:00 -06:00
Scott Lahteine
7a4029d1b1
Correct MOTHERBOARD for Geeetech i3 Pro X
2018-02-10 20:29:29 -06:00
Scott Lahteine
451fb16f9b
Fix CYCLES_PER_MICROSECOND conflict
2018-02-10 20:08:48 -06:00
Scott Lahteine
3e384b60ce
Malyan M200 fix E0_AUTO_FAN_PIN ( #9580 )
...
Fixes #8794
2018-02-10 20:04:09 -06:00
Scott Lahteine
33752de12d
Update some outdated configs
2018-02-10 19:48:16 -06:00
Scott Lahteine
38c7d53bf7
Repair some spacing
2018-02-10 19:33:26 -06:00
Scott Lahteine
e3043d7ac7
Fix #8744
2018-02-10 16:54:42 -06:00
Scott Lahteine
d3ddd5ffaa
Merge pull request #9576 from thinkyhead/bf2_more_tests
...
[2.0.x] Fix Power class
2018-02-10 16:43:55 -06:00
Scott Lahteine
7280fa1e31
Patch Power class
2018-02-10 15:41:18 -06:00
Scott Lahteine
4aff6c1c32
Tronxy X5S pins and configuration
2018-02-10 15:07:04 -06:00
Scott Lahteine
05aa75cecf
Melzi boards use melzi pins
2018-02-10 14:44:14 -06:00
gege2b
5785bbb491
Updated french translation ( #9556 )
2018-02-10 14:15:41 -06:00
GMagician
299606e4ae
[2.0.x] Memory overflow protection ( #9562 )
2018-02-10 14:14:34 -06:00
teemuatlut
5990266724
Init CS pins before loading settings ( #9566 )
2018-02-10 14:08:53 -06:00
teemuatlut
d3fdb44ad8
Update TMC section with SW SPI pins ( #9554 )
2018-02-09 22:54:34 -06:00
Scott Lahteine
3168f0e646
Merge pull request #9549 from thinkyhead/bf2_prevent_comments_resetting
...
[2.0.x] Prevent watchdog reset due to many comments
2018-02-09 07:13:26 -06:00
Scott Lahteine
9be6aa3f79
Merge pull request #9544 from thinkyhead/bf2_reliable_probe_heaters_off
...
[2.0.x] More reliable PROBING_HEATERS_OFF with BED_LIMIT_SWITCHING
2018-02-09 07:12:29 -06:00
Scott Lahteine
c0dd9ef9f2
Support for AnyCubic TriGorilla board ( #9551 )
2018-02-09 05:41:52 -06:00
Scott Lahteine
da693a636e
Fix handling of escapes in serial input
2018-02-09 05:19:33 -06:00
Scott Lahteine
cc9cef7f7a
Fix HAS_CONTROLLER_FAN in is_power_needed
2018-02-09 05:19:33 -06:00
Scott Lahteine
112917cfef
No EXTRUDER_RUNOUT_PREVENT during print
2018-02-09 05:19:33 -06:00
Scott Lahteine
c30a8067ab
Prevent watchdog reset due to many comments
...
Addressing #7449
2018-02-09 05:19:33 -06:00
Scott Lahteine
b7053156fe
Minor comment/condition cleanup
2018-02-09 01:53:35 -06:00
Scott Lahteine
f64d300cfd
Sanity check SERIAL_PORT
...
Addressing #7400
2018-02-09 00:44:15 -06:00
Scott Lahteine
5a70887467
Size lcd_status_message based on language ( #9545 )
2018-02-08 23:03:47 -06:00
Scott Lahteine
545cd8fa60
Tweak malyanlcd.cpp
2018-02-08 22:00:23 -06:00
Scott Lahteine
e698998343
More reliable PROBING_HEATERS_OFF with BED_LIMIT_SWITCHING
2018-02-08 21:10:11 -06:00
shaktee
27faeafc1b
[2.0.x] BIBO Cyclops ( #9541 )
2018-02-08 21:01:31 -06:00
Scott Lahteine
2014d38e10
NEOPIXEL_BRIGHTNESS parity
2018-02-08 18:55:19 -06:00
Scott Lahteine
694d2ebec0
TMC SW SPI pins in Configuration_adv.h
...
Counterpart to #9632
2018-02-08 18:49:38 -06:00
GMagician
9854262334
[2.0.x] Fix compile warning ( #9539 )
2018-02-08 17:59:03 -06:00
Scott Lahteine
b639f1ad4b
Correct some retract() comments
2018-02-08 17:57:48 -06:00
Thomas Moore
1541224a81
Enable Z axis and delta sensorless homing ( #9516 )
2018-02-08 04:20:44 -06:00
Scott Lahteine
b2f8b4ada5
I2C position encoders update ( #9533 )
...
Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.
2018-02-08 03:57:11 -06:00
Thomas Moore
93af0365e8
[2.0.x] Add support for Cohesion3D ReMix and Mini ( #9512 )
...
* Add support for Cohesion3D ReMix and Mini
* Two separate pins files for pedantic reasons
2018-02-08 03:14:39 -06:00
Scott Lahteine
23240f7986
Fix sw serial pins for TMC2208
...
From #9518 by @melvinisken
2018-02-08 02:54:49 -06:00
Scott Lahteine
d42a87cb31
Update language Italian
...
From #9508 by @tnw513
2018-02-08 02:10:15 -06:00
Scott Lahteine
2538f019d0
Update language Basque-Euskera
...
From #9514 by @1138-4EB
2018-02-08 02:08:41 -06:00
Scott Lahteine
d168ee9bed
Drop leveling include from steppers.cpp
2018-02-08 01:32:19 -06:00
Scott Lahteine
09c8807a36
Minor formatting in queue.cpp
2018-02-08 01:31:19 -06:00
Scott Lahteine
704d33c374
Special override of LCD_WIDTH
2018-02-08 01:30:56 -06:00
Scott Lahteine
b3f115fa0a
Marlin.ino needs no content ( #9506 )
2018-02-06 02:28:18 -06:00
Scott Lahteine
ca8fdff1af
Comment G26 properly
2018-02-06 00:58:28 -06:00
Scott Lahteine
8558264514
Configs for Prusa i3 Pro B GT2560 Rev.A Plus ( #9505 )
...
One without probe and one with BLTOUCH.
2018-02-06 00:24:21 -06:00
Scott Lahteine
b5e92f4f90
[2.0.x] Enable / disable PSU automatically ( #9503 )
2018-02-06 00:22:30 -06:00
Scott Lahteine
eecb0188c0
Add ULTI_CONTROLLER to example configs
2018-02-05 22:30:03 -06:00
Scott Lahteine
16739264d3
Add UltiController v2.1 support
...
Add compatibility with the original screen bord from Ultimaker 2 printer (UltiController v2.1 with the PG-2864ALBP I2C display)
2018-02-05 22:30:03 -06:00
Scott Lahteine
a8c4174a13
M100 comment
2018-02-05 21:54:50 -06:00
Scott Lahteine
38d62494ef
Adjustment to DOG_CHAR_*_EDIT
2018-02-05 20:25:45 -06:00
Scott Lahteine
8a6feab1c4
Num-to-string functions for DEBUG_LEVELING_FEATURE
2018-02-05 19:08:27 -06:00
Scott Lahteine
766faa05a9
sp
2018-02-05 15:57:29 -06:00
GMagician
f27c89980a
[2.0.x] Simplify bltouch configuration ( #9488 )
2018-02-05 14:38:09 -06:00
GMagician
338dac258b
[2.0.x] Fix compiler error when G26 is enabled ( #9492 )
2018-02-05 14:27:39 -06:00
Scott Lahteine
4ddb6a3a1f
Merge pull request #9470 from thinkyhead/bf2_malyan_clueless
...
[2.0.x] Malyan M200 LCD
2018-02-05 05:03:18 -06:00
Scott Lahteine
03bfc0d7c8
Merge pull request #9439 from thinkyhead/bf2_fix_G26_circle_bumps
...
[2.0.x] Change G26 circle angles
2018-02-04 19:05:18 -06:00
Scott Lahteine
e5ee0b6f6c
Implement MALYAN_LCD
2018-02-04 18:52:44 -06:00
Scott Lahteine
b939a2e88c
Watchdog conditional for LPC
2018-02-04 18:52:44 -06:00
Scott Lahteine
4925f60cff
Add MALYAN_LCD to configs
2018-02-04 18:52:44 -06:00
Scott Lahteine
3a1225e438
Sanity check SENSORLESS_HOMING
2018-02-04 18:52:44 -06:00
Scott Lahteine
2ea4e74ed3
Misc. comments
2018-02-04 17:40:39 -06:00
Scott Lahteine
aecf0c9bb9
Allow override of CS pins generally
2018-02-04 16:36:30 -06:00
Scott Lahteine
0891b58c30
#ifdef tweaks
2018-02-04 16:36:30 -06:00
Bob-the-Kuhn
428f164d02
[2.0.x] Bug fix - "M114 D" and Due (dtostrf C linkage) ( #9481 )
2018-02-04 16:11:27 -06:00
Scott Lahteine
693843f1fa
Allow override of RAMPS CS Pins ( #9472 )
2018-02-04 16:00:16 -06:00
ABH10
ac6bf7226a
Update of comments in thermistor files. No functional changes. ( #8986 )
2018-02-04 06:06:21 -06:00
Alexey Shvetsov
da3a0d619c
Add Selena Compact board ( #9407 )
...
5-axis, high performance, powerful board with Smoothieware opensource firmware. Designed for 3D printer, Laser cutter or CNC mill. Five changed independent drivers on board. Two extruders 3d printer support.
2018-02-04 03:15:09 -06:00
Thomas Moore
786746404b
[2.0.x] Apply feedrate to nozzle movement for kinematic machines ( #8778 )
2018-02-04 00:26:05 -06:00
Scott Lahteine
5364b92c37
Drop obsolete string
2018-02-03 23:58:31 -06:00
shaktee
34624cf399
[2.0.x] BIBO TouchX configuration ( #9469 )
2018-02-03 23:21:02 -06:00
Bob-the-Kuhn
3d72fe0730
snapshot
2018-02-03 21:28:05 -06:00
Scott Lahteine
33ec599ca0
Tweaky LPC1768 SPI spacing/style
2018-02-03 20:25:57 -06:00
Scott Lahteine
c46de340b7
Clean up trailing whitespace
2018-02-03 20:05:23 -06:00
Thomas Moore
e1fd9c08b3
[2.0.x] Add support for LPC1769 at 120 MHz ( #9423 )
2018-02-03 19:33:26 -06:00
GMagician
6ace57e1b0
[2.0.x] remove duplicated include ( #9445 )
...
This was present in #9357 but lost
2018-02-03 19:32:05 -06:00
GMagician
9e13d1fad5
[2.0.x] Fix temperature out of LCD ( #9461 )
...
Fix bug introduced in #9415
2018-02-03 19:25:04 -06:00
Scott Lahteine
e6cdc438fd
Change G26 circle angles
...
To prevent the nozzle from colliding with the printed pattern.
2018-02-03 19:17:49 -06:00
Scott Lahteine
a8764ac5d5
G26 parity with 1.1.x
2018-02-02 05:19:14 -06:00
Manuel Valentino
374f2a5e16
[2.0.x] Fixed wrong information about TMC2208 wiring ( #9335 )
2018-02-02 04:45:55 -06:00
Bob-the-Kuhn
a0570ff1eb
Fix caselight on Due ( #9364 )
2018-02-02 04:13:33 -06:00
Scott Lahteine
b13099de3f
General cleanup of HAL code
2018-02-02 03:37:15 -06:00
Scott Lahteine
9b9350e010
Fix jerky Z motion between probes
...
Suggested by #9375
2018-02-02 02:32:11 -06:00
Scott Lahteine
d6e29e9597
Update French language
...
Based on #9373 by @nikkoura
2018-02-02 01:56:25 -06:00
GMagician
e1117a8492
[2.0.x] fix compile errors when CNC_COORDINATE_SYSTEMS is enabled ( #9380 )
2018-02-02 01:45:46 -06:00
GMagician
ea9ad4e46d
[2.0.x] Fix compile error on delta when NO_WORKSPACE_OFFSETS ( #9388 )
2018-02-02 01:44:48 -06:00
Scott Lahteine
79796b22ad
Fix up _Bootscreen.h and _Statusscreen.h
2018-02-02 00:57:16 -06:00
Bob-the-Kuhn
21179f8300
Fix the "slow" version of the G-code parser
2018-02-02 00:35:58 -06:00
Scott Lahteine
c251601916
Simplified SET_BIT, moved to endstops.cpp
2018-02-02 00:34:23 -06:00
Scott Lahteine
eb18ae9003
Define LSBFIRST / MSBFIRST for LPC
2018-02-02 00:34:23 -06:00
Scott Lahteine
f8227abf1c
Merge pull request #9384 from tcm0116/2.0.x-retract
...
[2.0.x] Clear retracted status when homing the Z axis
2018-02-01 23:36:36 -06:00
Scott Lahteine
ea5f91737f
Merge pull request #9392 from studiodyne/studiodyne-pause
...
[2.0.x] Pause resuming fix
2018-02-01 23:32:24 -06:00
teemuatlut
5c69d45f5b
[2.0.x] TMC2130 support for LPC platform ( #9114 )
2018-02-01 21:49:40 -06:00
Scott Lahteine
34160806c0
Fix broken G29 W I J
2018-02-01 21:37:35 -06:00
Scott Lahteine
f5cfdf6efe
Use _BV32 to avoid name conflict
2018-02-01 21:37:35 -06:00
Scott Lahteine
6339b506c0
Make sure binary.h is included as needed
2018-02-01 21:37:35 -06:00
studiodyne
51d080d2c1
Update Pause
2018-01-29 21:57:37 +01:00
Thomas Moore
7035471982
Clear retracted status when homing the Z axis
2018-01-29 19:40:04 +00:00
GMagician
6d4bc9a1f8
[2.0.x] Fix SD wrong filename list ( #9342 )
...
If last file in directory has short filename and is preceded by a deleted long file name. SD menu will wrongly report long deleted file name as last entry
2018-01-26 14:03:51 -06:00
Bob-the-Kuhn
c6e01ebd52
never mind ...
2018-01-25 22:13:32 -06:00
Bob-the-Kuhn
ab709ccac1
add USEABLE_HARDWARE_PWM & clear up some compiler warnings
2018-01-24 21:42:36 -06:00
Scott Lahteine
fc5c1a28d8
Fix M118 parameter parsing
2018-01-24 00:30:13 -06:00
Scott Lahteine
399bca316a
Fix has_value with FASTER_GCODE_PARSER
2018-01-24 00:30:13 -06:00
Scott Lahteine
80d3ded895
Change parser codebits from array to int32_t
2018-01-24 00:30:13 -06:00
Scott Lahteine
053b1371c7
Simplify G-code debug option
2018-01-24 00:06:07 -06:00
Scott Lahteine
608f8b10da
Parser val method parity with 1.1.x
2018-01-24 00:06:07 -06:00
Scott Lahteine
2bea1bda56
Move more strings to PROGMEM
2018-01-24 00:06:06 -06:00
Scott Lahteine
58671e1bc1
Marlin must override _BV for 32-bit masks!
2018-01-23 23:52:35 -06:00
Scott Lahteine
45cfb16424
Merge pull request #8355 from tcm0116/2.0.x-TwoWire
...
[2.0.x] Master-only TwoWire (I2C) class for LPC1768
2018-01-23 20:14:02 -06:00
Scott Lahteine
1dcfe193ac
Optimize some serial strings
2018-01-23 19:14:00 -06:00
Scott Lahteine
9644fe1839
Lightly optimize arc length calculation
2018-01-23 19:13:59 -06:00
Scott Lahteine
c9bda932fe
Patch M114 D logical output
2018-01-23 18:50:37 -06:00
Scott Lahteine
e5ca60acf5
Patch G29 no_action for A and Q
2018-01-23 14:00:06 -06:00
Scott Lahteine
696f8eb4c6
Include Z Fade in log_machine_info
2018-01-23 14:00:06 -06:00
Scott Lahteine
3217da6fa5
Followup patch for TMC stepper init
2018-01-23 14:00:06 -06:00
Scott Lahteine
db031d5d76
Add missing SoftwareSerial begin for TMC2208
...
Based on #9299
2018-01-22 10:43:24 -06:00
Thomas Moore
3db35ba9be
[2.0.x] Fix change filament for delta machines ( #9295 )
2018-01-22 10:21:42 -06:00
Scott Lahteine
2ebf52e57d
Fix Skew Correction pre-calculation overflow error
2018-01-22 08:20:21 -06:00
Scott Lahteine
adb2ac4747
Fix skew settings report precision
2018-01-22 08:09:36 -06:00
Scott Lahteine
205c5fa078
Merge pull request #9277 from oysteinkrog/fix/DualX_Endstops
...
[2.0.x] Fix DUAL_X_CARRIAGE endstop tests
2018-01-22 07:42:49 -06:00
Scott Lahteine
90d011cc48
Use ADD_PORT_ARG for all cases
2018-01-22 06:27:22 -06:00
Scott Lahteine
51c7b5d46f
Fix set_home_offset bug from bad porting
2018-01-22 06:16:21 -06:00
Scott Lahteine
b1cd012aa6
Clean up and document load/unload/pause/resume
2018-01-22 05:45:46 -06:00
Scott Lahteine
266086670b
Better LCD message when heating needed
2018-01-22 04:38:37 -06:00
Scott Lahteine
a718f5bdf3
Don't run M600 on filament runout if the nozzle is cold
2018-01-22 04:38:37 -06:00
Scott Lahteine
61bf8478a2
Add hotEnough methods
2018-01-22 04:38:37 -06:00
Scott Lahteine
7a52dfad55
Merge pull request #9283 from thinkyhead/bf2_jgaurora_configs
...
[2.0.x] Add JGAurora A5 support
2018-01-22 02:21:56 -06:00
Chris Pepper
f875f49caa
[2.0.x] LPC1768: Fix: Serial pins disabled correctly when in use ( #9193 )
2018-01-22 01:54:41 -06:00
Scott Lahteine
c63cffca7f
Add example configs for JGAurora A5
2018-01-22 01:27:11 -06:00
Scott Lahteine
7d6c009104
Add thermistor 15 tuned for JGAurora A5
2018-01-22 01:27:11 -06:00
Scott Lahteine
582d073de1
Patch up digital microstepping and SPI CS pins
2018-01-22 01:27:11 -06:00
Scott Lahteine
ab8a1a2a0d
Sync gCreate gMax1.5+ config with 1.1.x
2018-01-22 01:05:12 -06:00
Scott Lahteine
f9dbd4d9f4
Updated FolgerTech i3-2020 config
2018-01-22 01:05:12 -06:00
Scott Lahteine
348b454401
Probe bounds based on bed size
2018-01-22 01:05:11 -06:00
Bob-the-Kuhn
a440522f84
Merge pull request #9284 from Bob-the-Kuhn/DUE-pins-debug
...
[2.0.x] PINS_DEBUGGING maintenance
2018-01-21 18:40:39 -06:00
Scott Lahteine
58ed9901d7
Consistent NEOPIXEL_TYPE options
2018-01-21 17:19:38 -06:00
Scott Lahteine
382a5e3318
Clean up trailing whitespace
2018-01-21 17:19:38 -06:00
Øystein Krog
441517bbe1
Fix DUAL_X_CARRIAGE endstops
...
\#8170 fixed
2018-01-21 15:32:19 +01:00
Scott Lahteine
b46932f0c0
Merge pull request #9273 from thinkyhead/bf2_creality_tuneup
...
[2.0.x] Fix and improve Creality configs
2018-01-21 02:53:16 -06:00
Scott Lahteine
49bcb5ce2d
Merge pull request #9220 from benlye/lcd-timer
...
[2.0.x] Fix LCD timer string length
2018-01-21 02:47:59 -06:00
Scott Lahteine
07db5638e2
Add a heating indicator X offset
2018-01-21 02:04:14 -06:00
Scott Lahteine
c68ce8667d
Fix and improve Creality configs
2018-01-21 02:04:14 -06:00
Scott Lahteine
8190fdb260
[2.0.x] Option to use Neopixel as case light ( #9270 )
...
* Add option to use Neopixel as case light
* Apply CASE_LIGHT_USE_NEOPIXEL to example configs
2018-01-20 16:58:41 -06:00
GMagician
9b519864bf
[2.0.x] Relative movements fix ( #9259 )
2018-01-20 15:22:03 -06:00
Scott Lahteine
887664aa61
Restore broken Dual X Carriage
2018-01-20 15:08:50 -06:00
Scott Lahteine
fb044b6a64
Fix HAL_timer_set_current_count for STM32F1
2018-01-20 14:57:17 -06:00
Scott Lahteine
a8638aa20d
Update STM32F1 timer code to use libmaple bb_perip
2018-01-20 14:56:57 -06:00
Scott Lahteine
2e2fd8fd79
Merge pull request #9261 from tcm0116/2.0.x-delta_softstops
...
[2.0.x] Allow DELTA to compile with soft endstops disabled
2018-01-20 14:16:30 -06:00
Scott Lahteine
750cc02b3a
Use delay() in serial temp report
2018-01-20 14:13:17 -06:00
Scott Lahteine
9de8c04945
Allow FIL_RUNOUT_PIN override on RAMPS-based boards
2018-01-20 12:00:59 -06:00
Scott Lahteine
57b61491d3
Set FIL_RUNOUT_PIN for Creality CR10-S
...
Tested with M43 and found to be connected to DIO 2
2018-01-20 11:56:57 -06:00
Scott Lahteine
4a4d832344
Use standard encoder pulses/steps for CR-10S
2018-01-20 11:35:52 -06:00
Thomas Moore
44239b1062
Allow DELTA to compile with soft endstops disabled
2018-01-20 09:40:36 -06:00
Scott Lahteine
4bc4351250
Date refresh
2018-01-20 09:17:57 -06:00
Scott Lahteine
303d792b9f
Merge pull request #9253 from tcm0116/2.0.x-mks_sbase
...
[2.0.x] Cleanup MKS-SBASE compile warnings
2018-01-19 22:37:38 -06:00
Scott Lahteine
afec16e644
Merge pull request #9240 from tcm0116/2.0.x-eeprom
...
[2.0.x] Follow-on to #9161
2018-01-19 22:36:24 -06:00
Scott Lahteine
f2ea8a0529
Merge pull request #9197 from p3p/pr_bf2_operation_freemem
...
[2.0.x] LPC1768: Free up some RAM
2018-01-19 22:35:45 -06:00
Scott Lahteine
0c176c677e
Merge pull request #9231 from GMagician/2.0.x-ramps-pins-fixup
...
[2.0.x] Expand RAMP case light possibilities
2018-01-19 22:29:32 -06:00
Scott Lahteine
f2d09f27bb
Merge pull request #9246 from GMagician/2.0.x-bed-temp-limit-fix
...
[2.0.x] Standardized max temp values
2018-01-19 22:27:19 -06:00
Bob-the-Kuhn
16eb966ee3
PINS_DEBUGGING cleanup for DUE
2018-01-19 21:12:24 -06:00
Thomas Moore
63fd23ab1c
Cleanup MKS-SBASE compile warnings
2018-01-19 15:46:34 -06:00
Bob-the-Kuhn
11e68541b0
Merge pull request #9245 from Bob-the-Kuhn/TMC2208-sanity-check-2.0.x
...
[2.0.x] add TMC2208 sanity check to AVR
2018-01-19 15:42:53 -06:00
Thomas Moore
429e6ba8a6
Fix lcd_preheat dummy variable types
2018-01-19 15:24:13 -06:00
GMagician
719cd53e09
Standardized max temp values
...
Everywhere in menu items temperatures are "defined value" subtracted by 15.
In one place is subtracted by 5
2018-01-19 19:32:46 +01:00
Bob-the-Kuhn
0ea9cdf4f2
TMC2208 sanity check
2018-01-19 12:19:34 -06:00
Roxy-3D
7c469c0712
Suggested change to fix Due compile problem
2018-01-18 23:00:03 -06:00
Roxy-3D
bfd9728cf4
Serial buffer over run work around for v2.0.0 ( #9236 )
...
* Work around for serial buffer over run
PronterFace sends a lot of M105 commands. During long operations such
as UBL's G29 P1, G29 P2, G29 P4 and G26 this can over run the serial
buffer. This results (very often) in a M1 (actually a M1M105) ending
up in the command queue.
Until we figure out a better way to resolve this issue, this will keep
the UBL commands from experiencing bogus commands at thier completion.
2018-01-18 19:57:18 -06:00
GMagician
c371bdc499
Expand RAMP case light possibilities
...
Pin 6 is only used by servos when 2 or more of them are used
2018-01-18 18:31:08 +01:00
blye
7c18c2ea5f
Fix LCD timer string length
2018-01-17 21:10:45 +00:00
Roxy-3D
9d0cf02fef
Correct mesh size calculations
2018-01-17 09:36:12 -06:00
Scott Lahteine
c7bad74d8f
Merge pull request #9202 from benlye/m73-bugfix
...
[2.0.x] Fix progress bar duration when time is exactly 86400s
2018-01-16 21:14:58 -06:00
Roxy-3D
af9b32e3b9
Give PronterFace time to print the UBL What information...
...
Give PronterFace time to print the UBL What information...
2018-01-16 18:00:57 -06:00
Roxy-3D
acb1e31374
Fix UBL Mesh Size regression
2018-01-16 17:58:15 -06:00
Roxy-3D
f5f1b069ad
Convert UBL mesh tilting to all use the same algorithm ( #9204 )
...
A number of regressions were patched also. The UBL G29 P2 and P4 Press and Hold had stopped working. It is very possible this is broken in the bugfix_v1.1.x branch also.
The main purpose of the Pull Request is to get the 3-Point mesh tilting to use the LSF algorithm just like the grid based mesh tilt. This simplifies the logic and reduces the code size some what. But the real reason to do it is the 3-Point case can be solved exactly. And by feeding these numbers into the LSF algorithm it provides a way to check all that code for 'correctness'.
2018-01-16 11:08:00 -06:00
blye
554d849827
Fix duration when time is exactly 86400s
2018-01-16 08:12:00 +00:00
Christopher Pepper
6f1bf5d212
LPC1768: Config: default to SDSORT_LIMIT = 64 instead of 256
2018-01-15 22:02:21 +00:00
Christopher Pepper
1e65562d55
LPC1768: HAL: only initialise used HardwareSerial ports
...
Misc formatting
2018-01-15 22:00:59 +00:00
Roxy-3D
9dacd54a50
Get FT-i3-2020 configuration files into compliance with ?_BED_SIZE
2018-01-15 15:33:51 -06:00
Scott Lahteine
d178d6e921
M503 patch for EEPROM_CHITCHAT off
...
Fix #9155
2018-01-15 06:09:25 -06:00
Scott Lahteine
fa432508b0
Followup to Ender config
2018-01-15 06:00:21 -06:00
Thomas Moore
6856eccc77
Master-only TwoWire class for LPC1768
2018-01-15 05:22:03 -06:00
Scott Lahteine
d5bf9e74c4
Merge pull request #8996 from p3p/pr_bf2_more_adc_filter
...
[2.0.x] PID control fix and more LPC1768 ADC filtering
2018-01-15 05:14:25 -06:00
Scott Lahteine
4d2f277d43
Merge pull request #9189 from psavva/tmc_debug_compile_fix
...
[2.0.x] Fixes TMC_DEBUG compilation error
2018-01-15 04:52:21 -06:00
Scott Lahteine
43d3d024ac
Update tmc_util.cpp
2018-01-15 04:51:59 -06:00
Panayiotis Savva
ad500b01e0
Fixes TMC compilation error
2018-01-15 12:43:22 +02:00
Scott Lahteine
f4e4c7a7c8
Merge pull request #9188 from thinkyhead/bf2_creality_ender
...
[2.0.x] Add Creality Ender config/board
2018-01-15 04:33:09 -06:00
Scott Lahteine
2038722c52
LARGE_FLASH obsolete
2018-01-15 03:42:24 -06:00
