11289 commits

Author	SHA1	Message	Date
InsanityAutomation	5108e4b6aa	Cleaner EEPROM auto init (#13975)	2019-05-11 16:54:03 -05:00
Bob Kuhn	456a0ee76b	Improve Due SW SPI, Fysetc sanity checks, &c. (#13939)	2019-05-11 16:51:39 -05:00
Robby Candra	7b78a20fb7	Fix: Debug Memory Dump size (#13957) ... * Fix Memory Dump size * Fix Compile error on Memory Dump	2019-05-11 11:44:39 -05:00
Scott Lahteine	a613bcad2d	Fix some spelling	2019-05-10 20:39:19 -05:00
Tanguy Pruvot	62b36d1b98	Fix STM32 timer warnings (#13946)	2019-05-10 20:00:21 -05:00
Giuliano Zaro	f22c9a1ae1	Fix G-code parser with MMU2 (#13951)	2019-05-10 19:57:15 -05:00
Marcio Teixeira	746c38f4be	Fix HAL_DUE multiple define error with graphical LCD (#13971)	2019-05-10 19:52:43 -05:00
Bob Kuhn	75eca5c4f8	Fysetc pins updates for RAMPS and SKR 1.3 (#13963)	2019-05-10 19:29:28 -05:00
Marcio Teixeira	227f29090d	Add heater timeouts to ExtUI (#13970) ... - Add local UI methods to get heater timeout state. - Add methods to resume timed-out heaters. - Re-enable heaters on UI temperature request. - Make `ExtUI` show a dialog box if pause needs a button press after reheat.	2019-05-10 15:56:13 -05:00
Bob Kuhn	fa3739aa23	M100: LPC1768 and DUE compatibility (#13962)	2019-05-09 21:57:44 -05:00
InsanityAutomation	3f758d9e00	Fix some edit items for 16-bit encoder (#13948)	2019-05-09 18:28:47 -05:00
ManuelMcLure	51acbb2201	Prevent HOST_PROMPT_SUPPORT compile error (#13943)	2019-05-09 11:48:31 -05:00
Scott Lahteine	ad4ffa1d2f	Use C++ language supported 'nullptr' (#13944)	2019-05-09 11:45:55 -05:00
Tanguy Pruvot	e53d7e5517	STM32: ADC warning fix (#13933)	2019-05-09 00:33:38 -05:00
Scott Lahteine	23ec650410	Consolidate Malyan LCD and ExtUI	2019-05-07 21:31:30 -05:00
InsanityAutomation	6811e2921b	BLTouch v3 / 3DTouch Interoperability & performance (#13814)	2019-05-07 21:25:54 -05:00
Giuliano Zaro	40aff7e1f2	Remove extra MMU (non-12V) code (#13938) ... `check_version` in state -5 should not be needed since it has already been called in state -4 and the tested build nr is only updated in state -4.	2019-05-07 21:02:08 -05:00
Tanguy Pruvot	11adcf1ce3	Add'l PLR options, AVR strstr_P compat (#13880)	2019-05-07 20:38:40 -05:00
InsanityAutomation	5dcb25664f	Option to Auto-Initialize EEPROM (#13935)	2019-05-07 16:30:31 -05:00
Ludy	a504366138	Fix probe fan compiling error (#13930)	2019-05-07 14:14:12 -05:00
Tanguy Pruvot	24e956d168	Avoid int8_t underflow on filament runout (#13895)	2019-05-07 13:58:10 -05:00
Stephan	483822f3aa	Fix some THERMAL_PROTECTION_CHAMBER issues (#13678)	2019-05-06 19:55:01 -05:00
doggyfan	23a8707ef1	Configurable Thermistor (#13888)	2019-05-06 18:51:06 -05:00
J.C. Nelson	172abc305b	Malyan M200 core fixes (#13927)	2019-05-06 18:07:13 -05:00
Scott Lahteine	a36782ac1d	Define more u8g command macros	2019-05-06 17:26:34 -05:00
Scott Lahteine	f9a50f451d	Serial out cleanup	2019-05-06 17:26:34 -05:00
Scott Lahteine	9853331b34	Fix temp init, loosen ADC grace period	2019-05-05 22:55:03 -05:00
Tanguy Pruvot	a4c24511f7	STM32: Fix Marduino SBI/CBI redefine (#13912)	2019-05-05 22:06:30 -05:00
Ludy	c837e9250c	Define tmc variables where needed (#13918)	2019-05-05 22:04:47 -05:00
Ludy	f96eaad1ea	Unused variable cleanup (#13917)	2019-05-05 22:01:04 -05:00
Ludy	421d526ba7	Update German language (#13915)	2019-05-05 22:00:19 -05:00
Giuliano Zaro	b07360f32a	Update Italian language (#13916)	2019-05-05 21:59:34 -05:00
Robby Candra	79955f0c89	Fix PLR file delete bug (#13860)	2019-05-04 23:30:47 -05:00
ManuelMcLure	09f1b58146	Fix HOST_PROMPT_SUPPORT compile issue (#13847)	2019-05-04 22:55:51 -05:00
Giuliano Zaro	e2a77ed881	Bring chamber temp to completion (#13837)	2019-05-04 22:51:47 -05:00
Robert Mendon	24177954dd	Add missing AZSMZ Mini SPI pins (#13824)	2019-05-04 22:04:01 -05:00
kAdonis	ee73e17c9b	Hide 'vsense' report row if not used (#13884)	2019-05-04 22:00:24 -05:00
jmdearras	68004174d9	Fix thermistor 501 name (#13839)	2019-05-04 21:40:41 -05:00
Bob Kuhn	c48e6be366	Fysetc panel, RUMBA and ReARM pins, SPI mode 3 (#13900)	2019-05-04 17:59:36 -05:00
Chris	fd9d3ae181	Re-Arm 4x TMC2208 stepper improvement (#13819)	2019-05-04 17:26:13 -05:00
Tanguy Pruvot	e7b3720b81	Menu edit accel in increments of 25 (#13850)	2019-05-04 17:21:58 -05:00
Tanguy Pruvot	7da63fa03f	Fix NOMORE() sign warning in stepper (#13894)	2019-05-04 15:59:38 -05:00
Roman Moravčík	6d0ce033c2	Update Slovak language. (#13840)	2019-05-04 15:58:01 -05:00
InsanityAutomation	3fcab8dbf1	Option to disable fans during pause (#13820)	2019-05-04 15:50:44 -05:00
Chris Pepper	66f7065248	[LPC176x] Update extra script to support Python3 (#13908)	2019-05-04 20:52:28 +01:00
Scott Lahteine	2f32a6612d	Clean up Temperature::set_fans_paused	2019-05-04 14:36:59 -05:00
Marcio Teixeira	15357af67c	Backlash cleanup (#13659) ... …And save backlash, fil. sensor, ExtUI userdata to EEPROM.	2019-05-03 23:53:15 -05:00
Robby Candra	0181e57417	Add a minimum Z change option to power-loss recovery (#13859)	2019-05-02 22:29:05 -05:00
Robby Candra	c369477cb0	Fix bug: diveToFile breaks M23 (#13865)	2019-05-02 15:54:24 -05:00
Tanguy Pruvot	e5438a9a03	settings: store runout sensor on/off (#13876)	2019-05-02 00:47:26 -05:00
Scott Lahteine	e7682eea42	Use Arduino.h include wrapper (#13877)	2019-05-02 00:45:50 -05:00
Tanguy Pruvot	51d1e0f1dd	Auto-mount the SDIO SD card (#13879)	2019-05-02 00:45:21 -05:00
Thomas Moore	ee243e4edf	Fix mixing extruder filament change (#13803)	2019-05-01 21:55:58 -05:00
Scott Lahteine	bf54251a10	Finish, improve, clean up FYSETC_MINI_12864 revisions (#13871)	2019-05-01 20:05:29 -05:00
Scott Lahteine	9372e2603c	Simpler neopixel comment	2019-05-01 13:55:51 -05:00
Tanguy Pruvot	3272d0db01	Update French language (#13866)	2019-05-01 13:00:07 -05:00
Chris Pepper	95beafa9a2	Fix typo	2019-05-01 16:30:21 +01:00
Ludy	408a5f08dc	Update German language (#13853)	2019-05-01 01:25:57 -05:00
Tanguy Pruvot	cf3c746029	Improve French language (#13851)	2019-05-01 01:12:25 -05:00
Clinton James	2740cc64d8	Add SD Release when no SD_DETECT_PIN exists (#13857)	2019-05-01 01:00:21 -05:00
Luu Lac	39ebca6b5f	Fix FYSETC, MINIPANEL, MKS_MINI_12864 display (#13864)	2019-05-01 00:37:52 -05:00
Giuliano Zaro	93dcb537ef	Update Italian language (#13809)	2019-04-30 20:31:40 -05:00
Roxy-3D	142c8e2fed	Remove redundant Frivolous Game Options	2019-04-28 14:03:53 -05:00
Scott Lahteine	e43afb1a58	Clean up SKR pins	2019-04-27 14:56:12 +02:00
Scott Lahteine	9ccbd382e7	Update Watchdog description	2019-04-27 14:56:12 +02:00
Scott Lahteine	b6279abd30	Better THERMAL_PROTECTION_GRACE_PERIOD ... See #13783	2019-04-27 14:40:09 +02:00
chai-md	ed9eaa1942	Fix a comment in fwretract.cpp (#13802)	2019-04-26 09:36:29 +02:00
InsanityAutomation	610fb46683	Fix some ExtUI issues (#13799)	2019-04-26 09:32:01 +02:00
Bob-the-Kuhn	db89fc0304	Revert "bring my copy up to date" ... This reverts commit 503905c628.	2019-04-25 17:38:41 -05:00
Bob-the-Kuhn	503905c628	bring my copy up to date	2019-04-25 12:08:49 -05:00
Bob-the-Kuhn	73726d56b3	Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x	2019-04-25 12:06:01 -05:00
Scott Lahteine	5051909c3c	Update do_select_screen for general use (#13800)	2019-04-24 10:13:44 -05:00
Scott Lahteine	63f6ad3fd2	Basic RAMPS SD_DETECT_PIN override	2019-04-23 18:10:21 -05:00
InsanityAutomation	c6632925e3	Force no move on IDEX full control mode (#13797)	2019-04-23 15:20:59 -05:00
Giuliano Zaro	e2dd2268e8	Add a Z raise-between-probes to G34 (#13791)	2019-04-23 13:40:55 -05:00
Giuliano Zaro	0f9c49ccba	Update Italian language (#13790)	2019-04-23 13:36:05 -05:00
Giuliano Zaro	d77ef437db	Fix warning for redefined DEBUG_PRINT_P (#13789)	2019-04-23 13:35:02 -05:00
Marcio Teixeira	ca7f6ff287	Fix MSG_En messages for consistency (#13788)	2019-04-23 13:31:51 -05:00
Scott Lahteine	6ff81a33c1	Provide JSON values for SOFT_PWM_SCALE	2019-04-22 14:06:14 -05:00
Scott Lahteine	0c4d3e6622	Improve M906 description	2019-04-22 13:48:02 -05:00
Tanguy Pruvot	04ae3ba1fd	Major update to French language (#13784)	2019-04-22 13:31:04 -05:00
chai-md	78d7349fd7	Remove extra Z raises in tool change (#13782)	2019-04-21 21:06:46 -05:00
Kajetan Rzepecki	875e673a8c	Add HAL-based thermal protection grace period for all heaters (#13778)	2019-04-21 20:50:32 -05:00
Bob Kuhn	81ca5a4cd4	Fix and improve FYSETC LCD support (#13767)	2019-04-21 20:48:53 -05:00
felixstorm	4e35e6c705	Fix SS pin in ESP32 HW SPI (#13781)	2019-04-21 17:15:15 -05:00
felixstorm	4a48b70c0b	Fix (re-)defines in HAL_ESP32 (#13780)	2019-04-21 17:14:38 -05:00
Ludy	4228fd3e03	Update German language (#13769)	2019-04-20 15:01:56 -05:00
Kajetan Rzepecki	5f70c876ae	Fix _temp_error-related compile error (#13768)	2019-04-20 13:57:38 -05:00
Kajetan Rzepecki	ea1ee02b53	Disable hardware PWM on ESP32 I2S expander (#13762)	2019-04-20 13:41:17 -05:00
Scott Lahteine	bddb776ddb	Add chamber max-temp check ... Followup to #13756	2019-04-19 22:18:55 -05:00
Marcio Teixeira	d0c1eee53b	Add extra max-temp safety checks (#13756)	2019-04-19 21:37:12 -05:00
Marcio Teixeira	4ac28ba6b3	Add missing file (#13754)	2019-04-19 20:20:45 -05:00
jmdearras	b65cb5704d	Fix, improve FYSETC_MINI_12864 support (#13730)	2019-04-19 20:11:51 -05:00
Scott Lahteine	69c333ead9	More universal Formbot pins ... Replace `ROXYs_TRex` with pre-defines of the relevant pins at the configuration level.	2019-04-18 21:09:34 -05:00
Scott Lahteine	0a6835fbea	More robust HAS_LCD_CONTRAST	2019-04-18 21:09:34 -05:00
Marcio Teixeira	2e3d121ac4	Squelch compiler warning (#13739)	2019-04-18 13:18:49 -05:00
Kajetan Rzepecki	d83a7924e6	Fix ESP32 TOGGLE() with I2S expander (#13743)	2019-04-18 13:15:35 -05:00
Jimmy Wennlund	e6f6ed76c8	Show UBL Activate/Deactivate menu for current state (#13744)	2019-04-18 13:13:05 -05:00
Marcio Teixeira	08f21335a6	Fix bad opcode in LIGHTWEIGHT_UI; add 32-bit HAL and Due compatibility (#13751)	2019-04-18 13:10:58 -05:00
Kajetan Rzepecki	7c8ee0cd5b	Enable more ADC1 channels (pins 32-39) (#13742)	2019-04-18 13:01:24 -05:00
Bob-the-Kuhn	520585c5ed	Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x	2019-04-17 15:34:29 -05:00
Kajetan Rzepecki	e1acc09c6e	Fix LPC1768 HAL SSD* screen init (#13741)	2019-04-17 14:57:50 -05:00
Marcio Teixeira	836435c5ef	Fix action_edit int range bug (#13737)	2019-04-17 14:55:31 -05:00
Antonio Pérez	bf28ad4b6c	Fix clear of Z position last digit (#13731)	2019-04-17 14:52:20 -05:00
Marcio Teixeira	866e2d41dc	Correct range of LCD axis step editing (#13727)	2019-04-16 15:45:31 -05:00
Scott Lahteine	ab8052887f	Add missing MSG_PAUSE_PRINT_INIT_1 for en	2019-04-16 13:54:20 -05:00
petrzjunior	12d340cf2a	Update Czech language (#13729)	2019-04-16 13:53:14 -05:00
Robby Candra	e8dc87a2b7	Fix updated Allen Key pause probe logic (#13723)	2019-04-16 12:35:58 -05:00
Robby Candra	7ca1fea22b	Option to pause probe deployment only when triggered, for manually-deployed allen-key probe (#13698)	2019-04-16 01:32:43 -05:00
Robby Candra	35160dfb7a	Simplify PLR homing when Z homes to max (#13718)	2019-04-16 00:17:27 -05:00
Scott Lahteine	92ed9a2bb6	Fix is_M29 ... Followup for #13013	2019-04-15 23:47:06 -05:00
jmdearras	5f49b65c1f	Move LPC SD options to configs, add MKS_MINI_DISPLAY to SKR boards (#13712)	2019-04-15 22:55:33 -05:00
Bob Kuhn	9b578ca343	Support FYSETC_MINI_12864 on Re-ARM, RAMPS_FD, MKS SBASE (#13717)	2019-04-15 22:54:11 -05:00
Scott Lahteine	9992c424f5	Patch G92.9 flags ... Followup to #13703	2019-04-15 20:26:40 -05:00
ManuelMcLure	b1c13bce58	Fix EEPROM_CHITCHAT (and debug_out.h) (#13716)	2019-04-15 20:21:26 -05:00
Msq001	455ee23499	Fix, improve Power Loss Recovery (#13703) ... - Save and restore workspace offsets - Add retract and purge (hidden) options - Always restore axis relative modes - Use added `G92.9` to do position restores	2019-04-15 18:53:39 -05:00
Laurent	df75a606ff	Support MKS SGen board (#13694)	2019-04-15 17:03:10 -05:00
Kajetan Rzepecki	20dc45bca7	Refactor, fix ESP32 WebSocketSerial (#13689)	2019-04-15 16:32:20 -05:00
Roman Moravčík	db373f130c	Update Slovak language (#13692)	2019-04-15 16:14:49 -05:00
Kajetan Rzepecki	6fe90f0324	Define I2S pins for ESP32 (#13714)	2019-04-15 16:13:59 -05:00
InsanityAutomation	aa0f7afbe6	Fix call to uninitialized PWM pin, heater 2 overlap (#13674)	2019-04-15 15:57:34 -05:00
Bob-the-Kuhn	57aaa9110b	Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x	2019-04-13 21:14:52 -05:00
Scott Lahteine	6a71df2925	Tweak babystep add_steps	2019-04-13 14:14:26 -05:00
Bob-the-Kuhn	9dd4252b39	Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x	2019-04-12 22:07:12 -05:00
Marcio Teixeira	bdfffee037	Modify Z-offset overlay for clarity (#13660)	2019-04-12 15:43:29 -05:00
Stephan	84273557f9	Move and update heated chamber settings (#13671) ... Co-Authored-By: the-real-orca <stephan.veigl@gmail.com>	2019-04-12 15:38:10 -05:00
Ludy	62b4265410	Update German language (#13665)	2019-04-12 14:48:13 -05:00
Scott Lahteine	b18316dd37	Fix some spacing	2019-04-12 13:35:42 -05:00
Scott Lahteine	f2ba0a5ae7	Tweak some formatting	2019-04-12 13:15:37 -05:00
Scott Lahteine	7e58d33a2e	Update some headers	2019-04-12 13:04:04 -05:00
Giuliano Zaro	64ee064ded	Update Italian language (#13661)	2019-04-12 12:22:43 -05:00
Scott Lahteine	14b561f182	Extra AxisEnum values for E0-E5	2019-04-12 12:13:48 -05:00
Robby Candra	9e86fc3831	Require homing to toggle leveling (#13652)	2019-04-11 14:09:41 -05:00
Ludy	9fd3e64ba8	Fix compile error with EXTRUDER>1 (#13651)	2019-04-11 13:58:50 -05:00
Jamie	509dc283f2	Restore declarations of G53-G59 (#13654)	2019-04-11 13:51:05 -05:00
chai-md	2adc37becc	MAGNETIC_SWITCHING_TOOLHEAD (#13629)	2019-04-11 13:29:17 -05:00
ManuelMcLure	492883859e	Don't protect unused CS pins (#13647)	2019-04-10 21:57:57 -05:00
Scott Lahteine	9898f53361	Fix missing IS_SD_PRINTING	2019-04-10 21:48:16 -05:00
Scott Lahteine	1e59a2ac73	Hide pause/stop unless active printing	2019-04-10 19:46:59 -05:00
Scott Lahteine	ae42206500	Fix SD_REPRINT_LAST_SELECTED_FILE	2019-04-10 17:43:08 -05:00
Scott Lahteine	d72946a8d7	Fix LPC1768 build with no watchdog ... Fix issue mentioned at https://github.com/MarlinFirmware/Marlin/pull/13587#issuecomment-481737509	2019-04-10 17:34:15 -05:00
Scott Lahteine	cee3b172b9	Fix Marlin splash screen logic (#13646)	2019-04-10 17:14:57 -05:00
ANMay-ru	052f2ac352	Fix RURAMPS4D baud rate (#13644)	2019-04-10 15:53:21 -05:00
Marcio Teixeira	e6ebd30f60	Fix LCD issue on stepper timeout (#13630) ... - Remove a re-paint of the status screen on stepper timeout, which would cause a garbled LCD with `LIGHTWEIGHT_UI` and could interrupt whatever else the user might be doing in a submenu (such as playing games!) - Use the helper function to reset stepper timeout.	2019-04-10 15:51:48 -05:00
klcjr89	a8edd4f6d4	Fix Azteeg X5 MINI BOARD_NAME (#13632) ... Co-Authored-By: klcjr89 <klcjr89@users.noreply.github.com>	2019-04-10 15:46:12 -05:00
Scott Lahteine	5018fdacbe	Support FYSETC_MINI_12864_PANEL (#13365)	2019-04-09 18:34:29 -05:00
InsanityAutomation	4900c28bf6	Fix IDEX tool-change, and more (#13614)	2019-04-09 18:33:40 -05:00
InsanityAutomation	ba31d39f6d	Azteeg X5 Mini support (#13425)	2019-04-08 23:10:45 -05:00
Scott Lahteine	9cb5c57b84	Adjustments to ui8tostr_percent	2019-04-08 21:47:50 -05:00
Scott Lahteine	321a5e6580	Fix SD card reselect when scrolled (#13624) ... - Change encoder position to 16-bit integer. - Fix `SD_REPRINT_LAST_SELECTED_FILE` when the screen is scrolled.	2019-04-08 21:10:41 -05:00
Scott Lahteine	0e3c9e726d	Set default Raptor runout/caselight pins	2019-04-08 18:18:08 -05:00
Scott Lahteine	5e38d70697	Fix M217 report label, general cleanup	2019-04-08 18:18:08 -05:00
Scott Lahteine	fae2b7edc3	Update MMU2 code style	2019-04-08 18:13:42 -05:00
Scott Lahteine	c8a83fb122	SPINDLE_LASER_ENABLE => SPINDLE_LASER_ENA	2019-04-08 18:13:41 -05:00
Scott Lahteine	9abe9aff56	Confirm before starting SD print (#13616)	2019-04-08 13:44:35 -05:00
Scott Lahteine	7e0008f5b3	Fix SETCURSOR_RJ	2019-04-07 20:25:54 -05:00
Robby Candra	81c2c3ec11	Continuous filename scrolling (#13609)	2019-04-07 16:58:32 -05:00
Ludy	c29820f649	Suppress compile warning (#13612)	2019-04-07 16:53:30 -05:00
Scott Lahteine	a2b3ad6d0a	Don't override RGB LED pins, by default	2019-04-07 16:42:26 -05:00
Bob Kuhn	9a56d90150	Fix M43 on LPC176x (#13587) ... The real fix. PR #13568 was wrong.	2019-04-06 18:06:07 -05:00
Roxy-3D	9cee81d47e	Option to show babysteps total since G28 (#13580)	2019-04-06 18:04:34 -05:00
Scott Lahteine	3221658a78	Adjust park position description	2019-04-05 20:40:50 -05:00
Scott Lahteine	028b78f623	Suppress a compile warning	2019-04-05 20:06:19 -05:00
Scott Lahteine	cf12fc8366	Expand on serial debugging (#13577)	2019-04-05 20:02:46 -05:00
Marcio Teixeira	bf7b28b456	Fix incorrect variable name (#13585)	2019-04-05 19:04:46 -05:00
Kajetan Rzepecki	27693cec29	Extend ESP32 HardwareSerial with flushTX. (#13588)	2019-04-05 19:04:02 -05:00
Alexander Gavrilenko	3c47e1b4d1	Support Black STM32F407VET6 with RAMPS-like shield (#13524)	2019-04-05 15:30:19 -05:00
VBen	0dfd76ba55	Fix Z hotend offset broken by parking extruder tool change (#13582)	2019-04-05 15:28:32 -05:00
Scott Lahteine	027a901bec	Trim whitespace	2019-04-05 15:04:23 -05:00
Kajetan Rzepecki	692a0198f9	Fix SPISettings frequency parameters in ESP32 HW SPI (#13573)	2019-04-04 23:17:14 -05:00
Kajetan Rzepecki	63d95862fa	Add FastIO TOGGLE for ESP32 (#13574)	2019-04-04 23:15:17 -05:00
drzejkopf	0992d1a4c8	Fix Invaders game compile error (#13575)	2019-04-04 23:13:11 -05:00
Robby Candra	cd1ef33c8c	Drop extra PLR save test (#13554)	2019-04-04 22:47:00 -05:00
Scott Lahteine	72c7751768	Fix SERIAL_POS in use with DEBUG_OUT	2019-04-04 22:12:03 -05:00
Scott Lahteine	cacec5764a	Clean up whitespace	2019-04-04 22:12:02 -05:00
Scott Lahteine	83e214478e	Click-hold to exit Invaders, fix Brickout compile	2019-04-04 17:07:50 -05:00
Scott Lahteine	240ea1bbb3	Split up games into separate files	2019-04-04 03:06:19 -05:00
Marcio Teixeira	27a4927ed1	Add option to move away from endstop after homing. (#13557) ... Add option to move away from endstop after homing. - Add `ENDSTOP_BACKOFF` for printers with a recessed Z home button (Lulzbot TAZ 6). - Also prevents chattering when sensorless homing with axes against bumpers.	2019-04-04 02:47:19 -05:00
InsanityAutomation	d44e5b1fde	Fix stepper direction macros, multi-nozzle scope (#13569)	2019-04-04 02:44:07 -05:00
Scott Lahteine	10b9632bed	Fix menu history item selection	2019-04-04 02:41:23 -05:00
Scott Lahteine	f1810689ff	Fix bootscreen condition	2019-04-04 00:19:47 -05:00
Kajetan Rzepecki	b21ca53dfc	SPIFFS-backed PersistentStore for ESP32 (#13566)	2019-04-03 20:28:26 -05:00
Scott Lahteine	af92ee9dd6	No PLR include needed in queue.cpp	2019-04-03 18:26:31 -05:00
Scott Lahteine	5d2c5877f7	DOGM bootscreen cleanup	2019-04-03 18:10:50 -05:00
Scott Lahteine	2aa35e95af	More G26 arc cleanup ... Followup to #13531	2019-04-03 16:03:21 -05:00
Scott Lahteine	20a41e2f7b	SDCARD_RATHERRECENTFIRST with SDCARD_SORT_ALPHA	2019-04-02 22:25:18 -05:00
Robby Candra	46445a5a16	Event G-code for Stop SD Print (#13547) ... Co-Authored-By: 7eggert <7eggert@gmx.de> Co-Authored-By: robbycandra <robbycandra.mail@gmail.com>	2019-04-02 22:09:30 -05:00
Kajetan Rzepecki	2cfa9e9008	Fixed chamber-related compile error (#13552)	2019-04-01 17:53:56 -05:00
Scott Lahteine	a0a5c31c05	Power-Loss initialization fix (#13553) ... - Only save to PLR file on moves with E and X or Y - Save to PLR after any long-ish Z downward move	2019-04-01 17:52:45 -05:00
Scott Lahteine	8b7c3eec83	Games, for fun (and stress-testing) (#13464)	2019-04-01 17:48:54 -05:00
InsanityAutomation	fbc7b51a24	Use NO_FETCH for Dual X G28 (#13539)	2019-04-01 17:48:21 -05:00
Scott Lahteine	5de7b5b35e	Games, for fun (and stress-testing) (#13464)	2019-04-01 15:43:48 -05:00
InsanityAutomation	4961d8aa3e	Update G28.cpp (#13539)	2019-03-31 19:50:40 -05:00
Scott Lahteine	de0046fc8b	Fix empty HAS_TIMER macros	2019-03-30 23:04:40 -05:00
Kajetan Rzepecki	c9079165ee	Fix MAX6675 readout with Hardware SPI (#13530)	2019-03-30 22:31:49 -05:00
ManuelMcLure	04086fc455	Minor optimization to ARC_SUPPORT code (#13531)	2019-03-30 22:29:37 -05:00
Robby Candra	a3f67acd6d	Fix Power Loss Recovery file delete (#13522)	2019-03-30 13:14:58 -05:00
Marcio Teixeira	d992dfe7d5	Use the percent util func in the string func. (#13523)	2019-03-30 13:00:31 -05:00
drzejkopf	b1f739e27b	CR10_STOCKDISPLAY support in Bigtreetech SKR (#13516)	2019-03-29 14:19:18 -05:00
Marcio Teixeira	5679fae11e	UltraLCD enhancements (lower fan resolution, backlash menu) (#13519)	2019-03-29 14:07:43 -05:00
Msq001	f0d14b83bc	Save/restore Relative modes in Power-Loss Recovery (#13501)	2019-03-29 13:40:42 -05:00
Marcio Teixeira	c6466c23fe	Silence signed/unsigned comparison warning. (#13508)	2019-03-29 13:33:45 -05:00
InsanityAutomation	7240e3a68f	Allow G26 with no heated bed (#13511)	2019-03-29 13:32:43 -05:00
Alexander Gavrilenko	6d9aaca082	Fix compilation error for MKS Robin (#13506)	2019-03-29 12:40:24 -05:00
Scott Alfter	c6dbe6e9d6	Fix Teensy 3.5/3.6 __get_primask (#13514)	2019-03-29 12:23:09 -05:00
Alexander Amelkin	e40636a7c1	Replace digitalPinHasPWM with HAS_TIMER (#13520)	2019-03-29 12:21:14 -05:00
Scott Lahteine	b46ca9aa94	Less timely comment, tweak conditions	2019-03-26 19:20:13 -05:00
InsanityAutomation	eb91f08725	Update descriptions and dont call unneeded functions	2019-03-26 11:24:52 -04:00
Ludy	fe346cd4d1	Fix DEBUG_EEPROM_READWRITE compile error (#13492)	2019-03-26 04:12:22 -05:00
Sam Lane	e3ab54753b	Add extra Linear Advance factors (#13490)	2019-03-26 04:02:27 -05:00
Chris Pepper	ffc2c2d7c5	Move FAST_PWM_FAN code to HALs (#13491)	2019-03-26 01:03:23 -05:00
Thomas Moore	263f8edff8	Disable volumetric extrusion during G26 (#13479)	2019-03-25 22:41:52 -05:00
Bob Kuhn	6bd0a0be97	Relocate DUE Stepper ISR to TC0,2 (#13481)	2019-03-25 22:39:51 -05:00
Thomas Moore	13a12f8a87	Fix UBL mesh editor on delta (#13478)	2019-03-25 22:04:57 -05:00
Scott Lahteine	d2e0c03afb	Remove trailing whitespace	2019-03-25 20:51:38 -05:00
Marcio Teixeira	7462fe3068	Fix compile error, squelch warnings (#13487) ... - Fix path to `bedlevel.h` include file - Add default to `case` statements to suppress warnings	2019-03-25 20:41:38 -05:00
Yannik Sembritzki	0d3ea59bcf	Add pins for Dual Z UART on SKR 1.3 (#13474) ... Fix #13470	2019-03-24 20:09:00 -05:00
pinchies	ef3b93daa1	Fix STM32F1 SD-based EEPROM emulation (#13475) ... If `openFile` is given `true`, then it has read-only access. Because all the writing occurs on the next line, this breaks SD card as EEPROM.	2019-03-24 20:07:31 -05:00
Chris Pepper	aacc1148b0	Fix M106 for index > extruders (#13473)	2019-03-24 20:03:53 -05:00
Thomas Moore	c5e96544b5	Fix vtool compiler warning (#13476)	2019-03-24 20:02:28 -05:00
Thomas Moore	02dc72acb6	Disable ABL when leveling corners (#13471)	2019-03-24 20:01:18 -05:00
7eggert	d96f7d6068	Minimum segments for G2/G3. Better for small arcs. (#13466)	2019-03-24 19:53:47 -05:00
Scott Lahteine	380c771988	Handle word-padded flash-based eeprom (STM32F1) ... Fix #13445	2019-03-24 19:14:04 -05:00
Scott Alfter	32332bcd03	Proceed with Teensy 3.5/3.6 HAL (#13450)	2019-03-24 00:08:32 -05:00
Scott Alfter	407202cc0f	Fix BLTouch pre-3.0 compatibility (#13454)	2019-03-23 23:28:15 -05:00
Marcio Teixeira	a0ca98f699	Additional ExtUI features (#13449)	2019-03-23 23:09:18 -05:00
Sam Lane	a8fa275dc6	Fix Fan 0 responding to all fan speeds (#13444)	2019-03-23 23:00:31 -05:00
InsanityAutomation	5eeffab5e5	Fix BLTouch Menus (#13441)	2019-03-23 22:58:34 -05:00
Scott Lahteine	d8329d858d	Default argument to defer_status_screen	2019-03-23 16:33:37 -05:00
Giuliano Zaro	9562a02c5a	Update Italian language (#13440)	2019-03-20 18:26:55 -05:00
drzejkopf	70e6a3db8a	Add LEVEL_CORNERS_HEIGHT to LEVEL_BED_CORNERS (#13439)	2019-03-20 18:26:12 -05:00
Roman Moravčík	f3cf95a937	Update Slovak language. (#13435)	2019-03-20 16:37:34 -05:00
Scott Lahteine	144018736a	Use USES_Z_MIN_PROBE_ENDSTOP	2019-03-18 16:58:31 -05:00
InsanityAutomation	5b2c37d6c1	Followup to BLTouch (#13422)	2019-03-18 16:31:11 -05:00
InsanityAutomation	3fb8489ae3	EXTUI and UBL compilation fixes (#13420)	2019-03-17 07:57:54 -05:00
Scott Lahteine	b376c7e374	Group DISABLED items	2019-03-17 07:56:35 -05:00
Scott Lahteine	58bca67883	Unify status scrolling further	2019-03-17 07:56:35 -05:00
Scott Lahteine	c4443f885e	finishstatus => finish_status	2019-03-17 07:56:35 -05:00
InsanityAutomation	691e5c3bb8	BLTouch V3.0 support (#13406)	2019-03-17 05:57:25 -05:00
Scott Lahteine	49cf92dc36	Extended condition macros (#13419) ... Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`	2019-03-16 23:43:06 -05:00
Tobias Frost	d20eab4f83	Fix macro in set_color() (#13417)	2019-03-16 19:05:59 -05:00
Ludy	59353546e8	Fix BUTTON_EXISTS and misplaced comma (#13411) ... Fixes #13410 and redeclaration of `BUTTON_EXISTS`	2019-03-16 11:59:12 -05:00
InsanityAutomation	09eb30dc05	IDEX Mirror mode based on Formbot / Vivedino Symmetric mode (#13404)	2019-03-15 22:46:27 -05:00
Scott Lahteine	5c1aa5162d	Adjust M206 output in M503 for DELTA	2019-03-15 19:20:40 -05:00
Scott Lahteine	ad8b82d054	Fix KILL_PIN assignment for MKS_MINI_12864 ... According to #13397	2019-03-15 19:20:40 -05:00
Scott Lahteine	3a916b4ef2	Create bresenham.h	2019-03-15 19:20:39 -05:00
Karl Andersson	5d3928cb01	PWM is not defined on Arduino Core STM32 (#13405)	2019-03-15 19:14:06 -05:00
Scott Lahteine	9a515cbd32	Fix Pause Print message and behavior (#13394)	2019-03-14 02:26:07 -05:00
Scott Lahteine	f5bcc00570	Unify debugging output with debug_out.h (#13388)	2019-03-14 02:25:42 -05:00
Andrei Pozolotin	cc8a871705	Add capability string CHAMBER_TEMPERATURE (#13391) ... Reference: #13380	2019-03-13 18:09:22 -05:00
Scott Lahteine	67bee06e43	No patch needed for non-libmaple analogWrite ... See https://github.com/pinchies/Marlin/pull/1#issuecomment-471388743	2019-03-13 07:21:10 -05:00
Scott Lahteine	f89b375fb9	Fixes and improvements for PWM pins (#13383)	2019-03-13 06:51:15 -05:00
Scott Lahteine	87162658c4	Fix and improve software endstops (#13386)	2019-03-13 05:48:36 -05:00
Scott Lahteine	6214c997c0	Remove includes of <binary.h>	2019-03-13 05:32:33 -05:00
Scott Lahteine	4555ae448f	Fixups for ESP32	2019-03-13 05:32:33 -05:00
Scott Lahteine	a5ea3e2f15	Fix hotend offset on switching toolhead change ... See commentary at #11623	2019-03-13 05:32:21 -05:00
jmz52	8e0ac93d60	Fix 'UNUSED redefined' compiler warning (#13387)	2019-03-13 04:34:02 -05:00
Hadrien Jouet	0278ad0a6d	Add ESP32 WiFi interface (#11209)	2019-03-13 00:48:08 -05:00
InsanityAutomation	c03df89921	ExtUI Mesh Leveling Extensions (#13363)	2019-03-13 00:45:52 -05:00
InsanityAutomation	050eac03af	Single X Duplication Extension (#13373) ... * Multi-nozzle selective duplication * Use a bit-mask, reduce stepper_indirection.h size * Tweak the multi-nozzle duplication description * Use 'S' as a bool in M605 * Add HAS_DUPLICATION_MODE conditional * Remove '_MODE' from the option name * M605 in the style of Stacker M280 * Also include direct mask style (P)	2019-03-13 00:42:50 -05:00
Scott Lahteine	ad91476d26	Fix USEABLE_HARDWARE_PWM	2019-03-13 00:12:46 -05:00
Scott Lahteine	d63da4592d	Tweak to SCARA_move_to_cal	2019-03-12 22:06:50 -05:00
Scott Lahteine	51ff5b68fa	Clean up fastIO ahead of PWM patch	2019-03-12 20:39:55 -05:00
Scott Lahteine	388babbcea	Tweak SERIAL_PRINTF	2019-03-11 20:58:27 -05:00
Scott Lahteine	d94e077901	Apply HAS_HOTEND_OFFSET where needed	2019-03-11 20:58:27 -05:00
Scott Lahteine	11d6a939df	Always define axis_unhomed_err	2019-03-11 20:58:27 -05:00
7eggert	10c8c034bd	Allow both encoder and ADC keypad (#13355)	2019-03-11 18:10:56 -05:00
Andrei Pozolotin	31ff7da7ac	Add missing CHAMBER options (for M141) (#13371)	2019-03-11 16:50:07 -05:00
Scott Lahteine	0375e92847	Followup to serial rework ... As mentioned in #13370	2019-03-11 16:46:04 -05:00
jmz52	013bb469ca	Fix compilation for STM32F1 with no SDIO (#13366)	2019-03-11 16:40:51 -05:00
Scott Lahteine	e52bcc9408	Limit top bed temp to BED_MAXTEMP - 10 ... The chances of a 10° overshoot is pretty minimal.	2019-03-11 16:32:34 -05:00
Scott Lahteine	98b55421a5	Clean up some temp config	2019-03-11 16:31:23 -05:00
InsanityAutomation	785a7028bf	Followup to 'volatile' patch (#13369) ... Originally #13344	2019-03-11 15:01:57 -05:00
Scott Lahteine	aa1d587128	Some LCD code cleanup	2019-03-11 05:07:31 -05:00
Scott Lahteine	fa11427ec6	Remove obsolete LCD_CONTRAST	2019-03-11 03:33:07 -05:00
pinchies	4df9509ead	Add support for printers with inverted fan pins (#13362) ... Add support for printers with inverted fan pins by adding `#define FAN_INVERTING 1` to `Configuration_adv.h` and modifying the fan write macros.	2019-03-10 20:51:21 -05:00
Scott Lahteine	1f7e220387	Make HAL ISR macros function-like	2019-03-10 20:44:27 -05:00
Scott Lahteine	e3ce346f24	Report position to host in Nozzle::park	2019-03-10 19:09:28 -05:00
Scott Lahteine	77b4176152	Use lib include for bit_constants.h	2019-03-10 19:09:28 -05:00
Scott Lahteine	3419099f0a	Clean up whitespace	2019-03-10 19:09:28 -05:00
pinchies	4c43e6c48b	Fix "spontaneous heating" issue (WRITE bug) on STM32 (#13356) ... Should fix "spontanous heating" problems due to order of operations error. Error occurs at least with ststm32 v5.1.0 in PlatformIO.	2019-03-10 17:25:54 -05:00
Michiel Baird	b824a517aa	Add G38.4 and G38.5 (#13348)	2019-03-10 17:22:09 -05:00
Bruce j Beare	e4d080e63c	Reset after kill with a button on the KILL_PIN (#13091)	2019-03-10 09:57:38 -05:00
MoellerDi	c36989c39e	Fix chamber temperature measurement (#13350)	2019-03-10 09:51:13 -05:00
Scott Lahteine	12503fce06	Followup to wait_for_user fix	2019-03-10 09:14:02 -05:00
Scott Lahteine	33a08fc6f7	Fix typos from temperature rework ... Followup to #12201	2019-03-10 08:28:16 -05:00
Tobias Frost	2efbcc90c5	Fix wait_for_user compile error (#13352)	2019-03-10 08:07:41 -05:00
Tobias Frost	60e82e3929	Send notifications to ExtUI for M0/M1 (#13344) ... - Send notifications to ExtUI for M0/M1 - wait_for_user can be non-volatile (not changed by interrupt) C / C++ compilers don't optimize away reads of non-volatile variables when a function call is used between accesses, because *any* variable could be changed by the function call. Since `wait_for_user` can't be changed without a function call, it should be non-volatile so the compiler can optimize away cases where it is read more than once without an intervening function call.	2019-03-09 14:20:37 -06:00
Marcio Teixeira	00fc43144a	Follow up fixes to various PRs. (#13334) ... - Ensure `MarlinUI:get_progress` is defined for `ExtUI`. - Fix for `BACKLASH_SMOOTHING` with small segments. `BACKLASH_SMOOTHING` with extremely small segments failed to fully correct due to the correction factor being rounded down. Rounding up ensures the entire backlash will converge to zero even for small segments. - Add pinout for the beta revision `EINSY_RETRO`. - Update soft endstops with tool offsets (for toolchange et. al. move clamping) (#12568)	2019-03-09 14:20:37 -06:00
Scott Lahteine	c7d618b4d9	Fix SERIAL_ECHOLNPAIR ... Fix #13333	2019-03-09 14:20:37 -06:00
InsanityAutomation	d54741eda8	Update some G26 plausible values. Add speed control. (#13330)	2019-03-08 03:13:44 -06:00
Msq001	fb3302feda	Fix STM32F1 Serial and ADC pins (#13331)	2019-03-08 02:21:32 -06:00
Reece Kibble	dbead66988	Allows user to set (almost) any PWM frequency (#12638)	2019-03-08 02:15:42 -06:00
Tobias Frost	afbec5ff7e	Have ExtUI::getProgress use ui.get_progress (#13328)	2019-03-07 18:00:38 -06:00
3dlabsio	645ca7af7a	M141 Heated Chamber, Temperature rework (#12201)	2019-03-07 02:09:39 -06:00
Scott Lahteine	44571775bd	Further support for 6 extruders	2019-03-07 01:00:56 -06:00
Scott Lahteine	893ee68b52	Clean up trailing whitespace	2019-03-06 01:02:43 -06:00
Scott Lahteine	39f1222060	One fewer G29 error string	2019-03-05 23:04:52 -06:00
Scott Lahteine	cfdb38eda4	Allow SERIAL_ECHOPAIR to take up to 12 pairs (#13311)	2019-03-05 06:46:19 -06:00
Scott Lahteine	4771e372a1	Update criteria for PAUSE/RESUME/STOP menu items (#13294)	2019-03-05 06:46:06 -06:00
Tobias Frost	56fdcf93d1	Disallow SD_DETECT_INVERTED with FYSETC F6. (#13307)	2019-03-05 06:45:28 -06:00
Tobias Frost	7ce13a6ec1	Fix a print_job_timer compile error (#13304)	2019-03-05 06:39:15 -06:00
Tobias Frost	6df51201ae	Include EXTENSIBLE_UI in single LCD sanity check (#13306)	2019-03-05 06:33:36 -06:00
Scott Lahteine	2e5a3b01fd	Save Power Loss Recovery only on move commands	2019-03-05 02:43:29 -06:00
Scott Lahteine	15738ea506	Update a motion comment	2019-03-05 00:50:29 -06:00
Scott Lahteine	bc87e97357	Prevent a tool change move out of bounds	2019-03-05 00:50:29 -06:00
Scott Lahteine	2212da453a	Distinguish between analog/digital auto fans (#13298)	2019-03-05 00:41:31 -06:00
Chris Pepper	2513f6b550	Fix multiport G28 with Binary Transfer (#13308)	2019-03-04 16:44:54 +00:00
Chris Pepper	38bef9da91	Report auto temp to both serial ports, if available (#13301)	2019-03-03 21:03:48 -06:00
Robert Mendon	367d392880	Init stepper current after stepper pins are set up (#13302)	2019-03-03 20:58:02 -06:00
InsanityAutomation	bf8b38e0f7	Relocate configs above Marlin/src folder (#13299)	2019-03-03 16:50:56 -06:00
Scott Lahteine	d71dc5cf42	Fix for Ender 4 fan/case light pin ... See #12731	2019-03-03 07:43:27 -06:00
Anthony Rich	7640b328df	Support for Tronxy X5S 2e (#13297)	2019-03-03 07:41:05 -06:00
Scott Lahteine	599cdc3f0f	Remove dead code from get_pid_output ... See #12981	2019-03-03 05:45:20 -06:00
Scott Lahteine	35ae5daf2d	Split up sdcard G-codes	2019-03-03 01:52:15 -06:00
Scott Lahteine	3f36a38512	Clean up some pre-serial-redirect includes	2019-03-03 01:52:15 -06:00
Scott Lahteine	fa0d909dd3	Add FIL_RUNOUT_PIN for BIGTREE_SKR_V1.3 ... See #13267	2019-03-03 00:27:47 -06:00
Ludy	bd4160dbaf	Unused CS_ACTUAL_sb (#13282)	2019-03-02 17:30:30 -06:00
Vasily Evseenko	71773b128d	Fix stepper use before init. Add Ultimaker2+ Extended clone config (#13284)	2019-03-02 17:29:02 -06:00
Scott Lahteine	edc4e037c4	Add a note to G10	2019-03-02 17:19:36 -06:00
Tobias Frost	57afd0ab37	Fix range check bug in FileList::seek() (#13286) ... When `count()` returns 0, `pos > (count()-1)` will always yield `true` due to integer underflow.	2019-03-02 16:43:08 -06:00
kAdonis	05c2f80826	Fix bug in wait-for-heatup (#13290)	2019-03-02 16:29:10 -06:00
Chris Pepper	b0553d2d97	Add M997 support and simple implementation for LPC176x (#13281)	2019-03-01 20:11:50 -06:00
Scott Lahteine	fa236e9718	General cleanup ahead of L64XX	2019-03-01 19:58:07 -06:00
Scott Lahteine	2f1e1dcb42	Gradual step towards EXTRUDERS 0 support	2019-03-01 01:51:24 -06:00
Scott Lahteine	99d0022fae	Drop the Z_MIN_PROBE_ENDSTOP option (#13276)	2019-03-01 00:27:45 -06:00
Scott Lahteine	9a6b90f47d	TMC2660.h comment tweaks	2019-03-01 00:25:22 -06:00
Scott Lahteine	a2e3226597	Init XYZ to configured home position	2019-02-28 22:10:26 -06:00
Scott Lahteine	4fbbce9a35	Marlin Dev Mode for DOGM status screen	2019-02-28 22:10:26 -06:00
Scott Lahteine	998ce55be0	Alternative fan bitmap	2019-02-28 22:08:20 -06:00
InsanityAutomation	e2e2a55d9b	Add thermistor type 67 SliceEng (#13275)	2019-02-28 19:44:17 -06:00
Msq001	5b7ad3a5a0	Fix SKR onboard TF card CS pin (#13272)	2019-02-28 19:41:19 -06:00
Scott Lahteine	7fde3ed915	Skip hysteresis check when temp is already close to target ... To eliminate a long delay during pause, park, and filament change	2019-02-28 14:35:19 -06:00
Chris Pepper	7de6476b3d	Fix binary protocol error	2019-02-28 02:31:42 +00:00
Scott Lahteine	2c10222e87	card.transfer_port => transfer_port_index	2019-02-27 20:14:17 -06:00
Chris Pepper	4ab433d391	Fix binary protocol with one serial port (#13270) ... - The `sdcard.transfer_port` variable is Marlin's internal serial port index, not the physical serial port number. - Added packet number to "ok" response so hosts don't need to wait for the ACK. - Renamed feature to `BINARY_FILE_TRANSFER`, as the speed up is only consequential to the ability to transfer binaries over serial.	2019-02-27 19:57:48 -06:00
InsanityAutomation	eb4bf93ea4	Add more Babystep options (#13262)	2019-02-27 04:38:56 -06:00
Scott Lahteine	f37df28d17	UBL G29 T current position fix ... Counterpart to #12845	2019-02-26 22:25:53 -06:00
Msq001	f8a39919fa	Add Bigtree SKR 1.3 board (#13267) ... Co-Authored-By: Msq001 <msq001@users.noreply.github.com>	2019-02-26 21:30:00 -06:00
Bob Kuhn	ddbe4cfa20	Printrboard G2 support (#13116)	2019-02-26 21:03:13 -06:00
Scott Lahteine	4200f9ed62	Hide freeMemory et.al. warnings	2019-02-26 18:03:00 -06:00
Scott Lahteine	dc88747770	Fix Due GET_ARRAY_IS_DIGITAL ... Co-Authored-By: bob-the-kuhn <bob.kuhn@att.net>	2019-02-26 17:49:14 -06:00
Scott Lahteine	a79b9bbe6b	Cleanup whitespace, add a const	2019-02-26 17:49:14 -06:00
Giuliano Zaro	2616e4d4d9	Remove duplicated 'chitchat' defines (#13258)	2019-02-25 16:13:01 -06:00
Scott Lahteine	5d28575d4d	Clean up some motion code	2019-02-25 16:01:42 -06:00
Scott Lahteine	808b076000	Update some ABL/UBL conditionals	2019-02-25 16:01:42 -06:00
Scott Lahteine	833c2e54a1	Add an empty flushTX to MarlinSerialUSB_Due	2019-02-25 13:48:14 -06:00
Scott Lahteine	38363902c7	Fix sanity checks for distinct E factor settings ... Reference #13156	2019-02-25 00:20:36 -06:00
Scott Lahteine	64253e1a58	Followup to serial reform ... Reference #13250	2019-02-25 00:20:36 -06:00
Minims	92a4984066	Fix G34 probe position (#13251)	2019-02-24 13:57:30 -06:00
Scott Lahteine	e15354e387	Simplify serial port redirect (#13234)	2019-02-23 22:53:01 -06:00
Chris Pepper	88cc1d1a31	Fix Preprocessor syntax in Re-ARM pins file (#13247)	2019-02-24 01:36:58 +00:00
Karl Andersson	76e9ee33aa	Fix include order to make SERIAL_PORT_2 work (#13241)	2019-02-23 16:56:09 -06:00
Bruce j Beare	562f2321d2	Fix a G34 bug, allow negative Z corrections (#13240)	2019-02-23 02:41:52 -06:00
FernandoVelcic	edf025ed8d	Update Spanish language (#13236)	2019-02-23 00:41:02 -06:00
Scott Lahteine	02fec89a0d	Turn fans off in zero_fan_speeds ... Addressing #13231	2019-02-22 21:00:44 -06:00
Scott Lahteine	15aa932aa6	HAL for Linux (#13146)	2019-02-22 19:09:10 -06:00
kwalters3	5eb82ca6a8	Change SSD1306_OLED_I2C_CONTROLLER to HAS_SSD1306_OLED_I2C (#13223)	2019-02-22 19:08:36 -06:00
Marcio Teixeira	109e67169c	Define G21 as NOOP w/o INCH_MODE_SUPPORT (#13229) ... Ticket #13228 If `INCH_MODE_SUPPORT` is undefined, G20 is an unknown command as it should be (Marlin is, by default, operating in metric mode). G21, however, is found in many slicers and printer start gcode sections and should be accepted (as a NOOP) to avoid the unknown commands.	2019-02-22 15:35:32 -06:00
AnHardt	31b0be74af	Fix autotemp_factor menu setting (#13226) ... Fix #12643 Only factors above 1 can have a 'positive' effect.	2019-02-22 15:30:17 -06:00
Evgeny-SPB	f6ab62bc13	Fix Creality CR-10 S5 filament change (#13219)	2019-02-21 05:40:49 -06:00
Thomas Moore	9f5e4e5ad8	Update LPC1769 Pins Files (#13183)	2019-02-21 00:54:05 -06:00
Greg Nutt	608a6810e7	Fix DOGLCD_A0 pin in pins_Smoothieboard.h (#13217)	2019-02-20 18:08:49 -06:00
Scott Lahteine	80359c9937	Add more parameters to M240 ... Co-Authored-By: shitcreek <45380455+shitcreek@users.noreply.github.com>	2019-02-20 14:51:36 -06:00
Scott Lahteine	a43e892fb5	Use 8-bit i2c address on LPC platform ... Fix #9799 — hopefully not a unicorn	2019-02-20 06:27:26 -06:00
Scott Lahteine	631d867dc9	HAL cleanups	2019-02-20 06:27:26 -06:00
Scott Lahteine	89bbc30a09	Fix init of power supply pin ... Fix #13184	2019-02-20 05:29:05 -06:00
Scott Lahteine	44c22e3935	Provide a default MAX6675_SS_PIN for ReARM ... See #8010	2019-02-20 05:06:06 -06:00
Scott Lahteine	3c9a7926c2	Fix compile error with JUNCTION_DEVIATION ... See #13000	2019-02-20 04:54:26 -06:00
Scott Lahteine	758c6c9464	Very minor SPI speedup	2019-02-20 04:36:23 -06:00
Scott Lahteine	422dd6666e	Fix Due EEPROM write bug ... See #13065	2019-02-20 04:36:23 -06:00
Scott Lahteine	03e109c4a3	FLASH_EEPROM => FLASH_EEPROM_EMULATION	2019-02-20 04:36:23 -06:00
Scott Lahteine	50917ccda6	Tweak some u8g interface code	2019-02-20 04:26:34 -06:00
LinFor	ba39186364	TMC_DEBUG optimization and improvements (#13135)	2019-02-20 02:22:42 -06:00
Scott Lahteine	1424b368cf	Tweak M122 comment in configs	2019-02-19 16:20:18 -06:00
Scott Lahteine	3a1b6fe8c1	Coding standards	2019-02-19 14:58:39 -06:00
InsanityAutomation	19af90face	Fix a host action compile error (#13208)	2019-02-19 14:47:31 -06:00
Marcio Teixeira	992cdc8d14	Fix host action / G-code ordering in event_probe_failure (#13207) ... Observing from the console, it makes the most sense to do `//action:probe_retry` before executing commands.	2019-02-19 14:45:03 -06:00
InsanityAutomation	33a6d52965	Fix a RAPTOR2 pin conflict (#13205)	2019-02-19 14:42:02 -06:00
InsanityAutomation	52665f54ad	Fix bad Purge More logic (#13193)	2019-02-19 14:37:18 -06:00
Scott Lahteine	18458ec42b	Error in Smoothieboard for unsupported display	2019-02-19 14:17:33 -06:00
InsanityAutomation	d4ed9b3ef1	Babystep also requires homing (#13191)	2019-02-17 14:35:45 -06:00
InsanityAutomation	ca7b2f574f	Fix condition on tool change filament swap menu (#13190)	2019-02-17 12:33:46 -06:00
Roman Moravčík	208ab8b366	Fix compilation with one service interval (#13185)	2019-02-17 12:32:47 -06:00
Roman Moravčík	567d03a269	Update Slovak language (#13187)	2019-02-17 12:29:49 -06:00
Alain Martel	27203c62b8	Enable M240, set photo pins for 3DFabXYZ i3 (#13174)	2019-02-15 21:16:39 -06:00
Evgeny-SPB	3025ddf179	Support for Creality CR-10 5S (#13173)	2019-02-15 21:09:44 -06:00
Scott Lahteine	e00aad84af	Add M240 parameters D I J R S	2019-02-14 20:00:40 -06:00
Marcio Teixeira	31c240a8db	Enhancements to G425 (#13159) ... - Turn off bed leveling prior to calibrating. - This prevents lateral probes from having a Z component that triggers the Z endstop and causes the motion to be aborted. - Got rid of static const float arrays "dimension" and "true_center" - Frees up 24 bytes of SRAM - Changed incorrect use of "bool" for float in backlash macros. - Replaced arguments with 0.0f and 1.0f for clarity. - Now only disables soft endstops (since calibration cube is outside of bed) - Not necessary to disable global endstops	2019-02-14 16:45:31 -06:00
Andy Shaw	84fc400aba	Update BIQU SKR V1.1 pins, add TMC2130 settings (#13166) ... * Remove untested displays add TMC2130 configs. * Remove references to the ReARM, delete untested displays. Add TMC2130 settings. Cleanup spacing, etc.	2019-02-14 16:43:56 -06:00
Scott Lahteine	ab2816c870	Patch for M240	2019-02-14 15:13:57 -06:00
Scott Lahteine	d2bdb71c13	Add PHOTO_GCODE option, photo trigger physical move (#13168)	2019-02-14 15:09:35 -06:00
Scott Lahteine	be9a409980	Fix M125 XY parameters, export get_homing_bump_feedrate	2019-02-14 05:25:46 -06:00
Scott Lahteine	ce40c2e87c	Use do_blocking_move_to(ref, fr)	2019-02-14 02:22:08 -06:00
Giuliano Zaro	bdc2f10b90	Update Italian language, fix unused var warning (#13164)	2019-02-13 21:05:18 -06:00
Marcio Teixeira	9f0e1834ec	Followup to #13039 (#13163) ... - Fix compile error when accessing `process_subcommands_now_P`. - Use `const` var eliminating double-negative (to make code more understandable).	2019-02-13 20:39:38 -06:00
Ludy	1ace97e946	[2.0.x] Update German language (#13150)	2019-02-13 20:31:50 -06:00
Scott Lahteine	7cf9b93f26	Add HAS_FILAMENT_SENSOR ahead of 12962	2019-02-12 20:13:20 -06:00
Giuliano Zaro	2c8d12d3ec	Update Italian language (#13148)	2019-02-12 18:40:34 -06:00
Scott Lahteine	c2b90c44e4	Prettify some code comments	2019-02-12 17:43:37 -06:00
Scott Lahteine	a0dadc8c62	Smaller I2CPositionEncoder strings	2019-02-12 16:21:56 -06:00
Scott Lahteine	18996d2595	Fix some spelling	2019-02-12 16:21:56 -06:00
revilor	e56c13670d	Service interval watchdog (#13105)	2019-02-12 15:58:56 -06:00
InsanityAutomation	7f1b69b0c8	Add HOST_PROMPT_SUPPORT (#13039)	2019-02-12 15:55:47 -06:00
Scott Lahteine	0feeef2604	Update copyright in headers	2019-02-12 15:30:11 -06:00
Scott Lahteine	894f5c24a8	Fix trailing whitespace	2019-02-12 14:25:57 -06:00
Roman Moravčík	bace52afd7	Fixed compilation with MMU2_MENUS disabled (#13140)	2019-02-12 12:55:49 -06:00
Ludy	584f9cd449	Update German language (#13137)	2019-02-12 12:54:57 -06:00
Scott Lahteine	d9a3fea022	Comments in HAL_spi_STM32F1.cpp	2019-02-11 18:06:33 -06:00
Giuliano Zaro	773fa5c40f	Fix define used when PID is off (#13119) ... Replaced `PID_MAX` with `BANG_MAX` since it should be the correct define to be used when PID is not enabled.	2019-02-11 17:29:17 -06:00
Giuliano Zaro	f7efe6f6c5	[2.0.x] Fix TEMP_STAT_LED startup init (#13120)	2019-02-11 17:27:59 -06:00
Ludy	2bd6ce4b62	Update German language (#13125)	2019-02-11 17:08:21 -06:00
Giuliano Zaro	27115ff7eb	Update Italian language (#13123) ... Incomplete.	2019-02-11 17:07:21 -06:00
Roman Moravčík	08a8bd10ca	Updated Slovak translation (#13122)	2019-02-11 17:06:10 -06:00
Scott Lahteine	3e2a4c3b26	Show mixer and temperature menus while printing	2019-02-11 16:52:47 -06:00
Scott Lahteine	8d271f20fe	C10mini E steps of 95 ... See https://www.patreon.com/posts/creality-cr10-24602624	2019-02-10 14:23:05 -06:00
Scott Lahteine	9737608f0a	Enable gradient when alias is cleared	2019-02-10 06:39:12 -06:00
Simon Jouet	5cd0fa3ce1	Basic GPIO expander using the ESP32 I2S peripheral (#12959)	2019-02-10 05:40:31 -06:00
Scott Lahteine	3983cacbcf	No extern needed for func decl	2019-02-10 05:38:27 -06:00
Scott Lahteine	43b29c093b	Update pinsDebug_list.h with XY PWM pins	2019-02-10 05:13:05 -06:00
Scott Lahteine	166e567ab8	Fix HAS_MOTOR_CURRENT_PWM	2019-02-10 05:06:46 -06:00
Scott Lahteine	6de3d34378	M166 Gradients, LCD Menu for 2-channel Mixer (Geeetech A10M/A20M) (#13022)	2019-02-10 04:54:23 -06:00
LinFor	7ee35c2611	PID_MENU option to save PROGMEM in LCD menus (#13095)	2019-02-10 04:03:18 -06:00
Ludy	936f982392	Update German Language (#13110)	2019-02-10 03:55:08 -06:00
AnHardt	0e37fe8776	Apply minimum C in M303 (#13113) ... Apply minimum `C` in `M303`. `PID_autotune()` needs to be called with a 'C'ycles-parameter >2 to give meaningful (different from 0) PID-factors. Therefore silently raise C to 3. Fixing one aspect of #13104	2019-02-10 03:54:45 -06:00
Scott Lahteine	5a316664e5	Update chopper timing	2019-02-10 03:12:20 -06:00
Scott Lahteine	fcb16ceb29	Update default config	2019-02-10 00:20:11 -06:00
Alain Martel	9ae7cca5e9	Disable RGB_LED for 3DFabXYZ (#13097)	2019-02-08 15:18:20 -06:00
Scott Lahteine	f3b6cb4d34	Clean up, update config comments	2019-02-08 15:13:52 -06:00
Scott Lahteine	ae03753ef1	Fix PCA9533 with PRINTER_EVENT_LEDS	2019-02-08 15:13:52 -06:00
Scott Lahteine	95d3f3953a	DEFAULT_WEBSITE_URL => BOARD_WEBSITE_URL	2019-02-08 14:54:34 -06:00
Scott Lahteine	6ddd81c178	[2.0.x] Update German Language (#13100) ... add MMU2	2019-02-08 14:25:24 -06:00
Giuliano Zaro	7c9ff322f3	Update Italian language (#13099)	2019-02-08 14:23:37 -06:00
Ludy	ce8cb6a5d9	[2.0.x] Update German Language ... add MMU2	2019-02-07 20:04:34 +01:00
Scott Lahteine	f269766408	Put the MMU2 menu with the others	2019-02-06 17:38:46 -06:00
Marcio Teixeira	e1604198ff	G425 — Auto-calibrate Backlash and Nozzle Offsets (#13050)	2019-02-06 17:20:17 -06:00
Marcio Teixeira	113af46a1b	Add ExtUI methods to babystep probe/nozzle offsets (#12590)	2019-02-06 07:16:54 -06:00
InsanityAutomation	413e303ad5	More Advanced Pause options (#12984)	2019-02-06 06:39:42 -06:00
Mark Zachmann	19cf72e057	Support individual solenoid disable with M381 (#13008)	2019-02-06 06:34:53 -06:00
teemuatlut	d81342254a	Support new TMC drivers (#13026)	2019-02-06 06:33:14 -06:00
Scott Lahteine	e1587da228	Clean up HAL_spi_Due.cpp (#13087)	2019-02-06 06:31:31 -06:00
Rolf Werum	524c6c10bf	MAGNETIC_PARKING_EXTRUDER (#12351)	2019-02-06 06:30:53 -06:00
Scott Lahteine	1bd9a63049	Add HAS_EXTRA_ENDSTOPS macro	2019-02-06 05:10:05 -06:00
Scott Lahteine	3c49396370	Fix compile error with DUE + MAX6675 (#13086)	2019-02-05 22:56:13 -06:00
Roxy-3D	ab6908a513	Fix Probe Offset bug...	2019-02-05 20:30:20 -07:00
revilor	69aaf5d096	MMU2 fixes (#13082)	2019-02-05 20:56:22 -06:00
Scott Lahteine	2f8e89adc3	Remove extraneous ui. prefixes	2019-02-05 19:04:37 -06:00
Scott Lahteine	870757aa17	Tweaks to pins_GT2560_V3.h	2019-02-04 22:52:50 -06:00
Scott Lahteine	b96cc30cd0	HAL spacing tweak	2019-02-04 21:51:06 -06:00
Scott Lahteine	9e394139e5	Followup to 90911104	2019-02-04 10:46:52 -06:00
Sam Lane	b35a7c2c87	Fixed closed-loop planner stall (#13005)	2019-02-04 07:43:09 -06:00
Ludy	691e925adc	Update German language (#13012)	2019-02-04 07:25:07 -06:00
Scott Lahteine	1497fb388a	M29 match logic was reversed (#13013) ... * M29 logic was reversed If in card-saving mode generate errors line errors for anything that's *NOT* "M29 ?" * Update queue.cpp * Update queue.cpp	2019-02-04 07:23:42 -06:00
Scott Lahteine	b5fd2fb58b	Allow M29 to be processed late	2019-02-04 07:23:02 -06:00
Scott Lahteine	c03bac9ad4	Update queue.cpp	2019-02-04 07:17:40 -06:00
Scott Lahteine	a49f0205ea	Update queue.cpp	2019-02-04 07:11:08 -06:00
Andy Shaw	9091110460	LPC1768 - Don't change CS pin state (#13015)	2019-02-04 07:08:39 -06:00
Scott Lahteine	10d855cb21	Sanity check USER_GCODE formatting	2019-02-04 06:36:41 -06:00
Scott Lahteine	d97bb4c41c	Followup to e10943d0	2019-02-04 06:11:31 -06:00
jeffstaley	2f176d6fb8	Flush RX buffer on G-code line errors to prevent hang (#13018)	2019-02-04 06:03:49 -06:00
Scott Lahteine	ca73b2f465	Add static assert to catch errors in COPY(a,b)	2019-02-04 05:52:32 -06:00
Nathan	df1043516e	Fix the delta homing issue (#12974)	2019-02-04 05:25:50 -06:00
Scott Lahteine	4200bd2fc1	Report on M92 with no arguments (#12833)	2019-02-04 05:24:15 -06:00
Scott Lahteine	e10943d0d8	Minor tweak to main menu	2019-02-04 04:58:31 -06:00
Scott Lahteine	d4d1b28a06	Fix some include paths	2019-02-04 03:57:15 -06:00
Scott Lahteine	0d720a6ff4	Tweak to emergency_parser.h	2019-02-04 03:56:56 -06:00
Scott Lahteine	0a7ea7063f	Hide Resume Print when not relevant	2019-02-04 03:02:44 -06:00
Scott Lahteine	afe79ba22b	Minor code cleanup	2019-02-04 02:23:06 -06:00
Scott Lahteine	fdb97a3e9c	Add class and macro to save and auto-restore a variable	2019-02-04 02:23:06 -06:00
Scott Lahteine	433518de74	Prevent M420 error from disconnecting OctoPrint ... Just echo the error instead of labeling it `Error:`.	2019-02-04 01:54:43 -06:00
Marcio Teixeira	5cfc1cdacc	Support SWITCHING_NOZZLE with 2 servos (#13054)	2019-02-04 00:19:56 -06:00
Psycho	3c88cac2e9	Velleman Vertex Delta pins (#13072)	2019-02-04 00:15:08 -06:00
Nicolas G	6fb4001b58	Add option to disable fan speed slowing in M303 (#13066)	2019-02-04 00:12:41 -06:00
Scott Lahteine	ca1be02bf0	Tweak some pins formatting	2019-02-04 00:06:41 -06:00
Scott Lahteine	38c2ca9281	Clean up trailing whitespace	2019-02-03 23:00:57 -06:00
Mark Zachmann	4d1093b386	Fix init of last_direction_bits (#13067)	2019-02-03 01:29:00 -06:00
Scott Lahteine	4fa1c52688	Tweak serial output code	2019-02-03 01:09:14 -06:00
Scott Lahteine	a5e3384691	Pre-apply cosmetic changes to mixing	2019-02-03 01:09:14 -06:00
Scott Lahteine	0358ffcd4c	Drop E element from homing_feedrate_mm_s	2019-02-02 15:55:00 -06:00
Scott Lahteine	95223cb28e	Remove dead code from stepper.h ... These values are always supplied by `Conditionals_post.h`.	2019-02-02 15:35:05 -06:00
mattfredwill	c3cb449990	TMC2130 dual-stepper Sensorless Homing (#13061)	2019-02-01 18:09:01 -06:00
Marcio Teixeira	f6edd2c472	Move stepper settings to "Advanced Settings" menu (#13063)	2019-02-01 18:07:04 -06:00
InsanityAutomation	68bbac207e	Update pins_FORMBOT_TREX3.h (#13058)	2019-02-01 18:06:02 -06:00
revilor	6a57d0b381	Prusa MMU2 (#12967)	2019-01-31 19:10:52 -06:00
Scott Lahteine	996f7d1642	Fix I2C_POSITION_ENCODERS commentary	2019-01-30 22:17:17 -06:00
raTmole	988b5aa4e6	Update GT2560 V3 pins (#13036)	2019-01-30 21:10:56 -06:00
InsanityAutomation	7d927b6691	Move Z Probe Z Offset from Advanced to basic Configuration (#13056)	2019-01-30 21:08:36 -06:00
Giuliano Zaro	31e213e427	Always show Tune sub-menu (#13049)	2019-01-30 21:05:55 -06:00
teemuatlut	f0503372d9	Revert E_AXIS_N cast (#13055)	2019-01-30 20:55:05 -06:00
InsanityAutomation	a1d03fe7ba	Fix single nozzle fan (#13038)	2019-01-30 20:54:04 -06:00
Scott Lahteine	159d7eefda	New boards entry for the A20M	2019-01-28 21:08:20 -06:00
Scott Lahteine	97da6c1da5	Use MIN/MAX for min/max	2019-01-28 20:36:13 -06:00
Scott Lahteine	17a8c37148	Label menu edit items	2019-01-28 20:20:46 -06:00
raTmole	ddeca7a358	Fix resume from power loss G-Code. (#13035)	2019-01-28 13:19:26 -06:00
Thomas Moore	02ab66fca3	Update Cohesion3D Pins Files (#13027)	2019-01-27 23:11:33 -06:00
Giuliano Zaro	a79d80c78e	Minor cleanup of pause code (#13030)	2019-01-27 23:10:25 -06:00
jeffstaley	0da636e1a3	Set correct stepper direction on reset (#13032) ... On a reset steppers were being initialized to incorrect direction. Original code wasn't respecting `INVERT_Z_DIR` define.	2019-01-27 23:02:38 -06:00
Scott Lahteine	3845baf398	Followup to #12982	2019-01-27 22:53:46 -06:00
InsanityAutomation	48a3502656	Remote streamer improvements (#12982)	2019-01-27 22:43:13 -06:00
Scott Lahteine	621fbe99de	Followup to #12817	2019-01-27 20:48:58 -06:00
Marcio Teixeira	f214118e45	Action to notify host of filament runout. (#12817)	2019-01-27 20:18:05 -06:00
Scott Lahteine	aad770bce8	Bring default configs in sync	2019-01-26 16:44:42 -06:00
jeffstaley	3f91233f6d	M29 logic was reversed ... If in card-saving mode generate errors line errors for anything that's *NOT* "M29 ?"	2019-01-25 07:36:52 -08:00
jeffstaley	0e0cc13650	Fix M29 for Pronterface SD card upload (#13010)	2019-01-24 21:10:59 -06:00
Jiri	24fffb8d93	Fix undefined lcd_tmpfan_speed on NO_LCD_MENUS (#13006)	2019-01-24 16:34:40 -06:00
Scott Lahteine	8f9b246d0e	Tweak some formatting, replace tabs	2019-01-24 13:18:56 -06:00
Bo Herrmannsen	808df82b36	Support for Anycubic I3 (#12972)	2019-01-24 12:40:49 -06:00
Scott Lahteine	ae91914260	Prevent name conflicts with mixed stepper drivers	2019-01-24 01:25:28 -06:00
Scott Lahteine	0eca236dcd	Fix L6470 config comments	2019-01-24 00:58:16 -06:00
InsanityAutomation	f4d1f13358	Warn on cold extrusion, dont error	2019-01-24 00:16:14 -06:00
Scott Lahteine	aa74a900f5	Bring Rostock 301 and ArmEd configs up to date	2019-01-23 23:37:37 -06:00
Scott Lahteine	0f07ba4f09	Tweak some comments	2019-01-23 20:18:13 -06:00
Scott Lahteine	00cdd41b5f	Clean up for recent changes	2019-01-23 20:08:58 -06:00
Roman Moravčík	7d53b79596	Update Slovak translation (#12991)	2019-01-23 19:48:16 -06:00
Giuliano Zaro	18c32996c1	[2.0.x] Updated Italian language (#12997)	2019-01-23 19:35:42 -06:00
Bob Kuhn	7c1a5e3c47	Fix TEMP_TIMER in pins_STEVAL.h (#12994)	2019-01-23 19:34:39 -06:00
Scott Lahteine	b4994ad12e	Update language_it.h	2019-01-23 19:28:57 -06:00
Bob Kuhn	2f35747f29	L6470 SPI daisy chain support (#12895)	2019-01-23 19:06:54 -06:00
Scott Lahteine	6453b82a5e	Clean up trailing whitespace	2019-01-23 15:57:01 -06:00
Scott Lahteine	48a581ba2e	Tweak some HAL Due code	2019-01-23 00:53:20 -06:00
Marcio Teixeira	54fdf57b8c	ExtUI: Fix fan wrapping around from 0 to 100 (#12987)	2019-01-22 23:33:10 -06:00
InsanityAutomation	dbe4126e07	Update language_en.h (#12988)	2019-01-22 23:32:01 -06:00
teemuatlut	e5801b75f8	Fix TMC-related compile issues. (#12971) ... - `STEALTHOP_[XYZE]` configuration options now set the default state.	2019-01-20 23:54:57 -06:00
Gert-Jan Rodenburg	bb30927549	Fix pins for ZONESTAR_LCD with Zonestar ZRIB (#12956)	2019-01-20 23:52:51 -06:00
Ludy	dc65d96aca	Fix TMC compile error (#12965)	2019-01-20 23:47:28 -06:00
InsanityAutomation	a1cf49935d	Add laser control menu (#12883)	2019-01-20 23:41:47 -06:00
InsanityAutomation	75f2665f2e	LCD SD Card items near top when not using wheel (#12926)	2019-01-20 23:24:53 -06:00
Scott Lahteine	e1f951813a	Remove old block end comment	2019-01-20 02:30:03 -06:00
Scott Lahteine	52108192d1	Prevent L6470 class name conflict with drivers.h define ... Fix #12824	2019-01-20 00:32:56 -06:00
Scott Lahteine	0495fcd475	Minor spacing fix	2019-01-20 00:10:50 -06:00
lanserge	c2cf8ffa82	Add support for Arduino DUE Shield Kit (#12950)	2019-01-19 23:43:32 -06:00
Scott Lahteine	4e5a915ef8	Fix some Makefile comments	2019-01-19 23:41:30 -06:00
Scott Lahteine	a5911765c3	Tweak some spacing	2019-01-19 20:27:57 -06:00
chrisly42	99e5e8362f	Rapide Lite 200 config, pins_RL200 RUMBA clone (#12848)	2019-01-19 20:19:14 -06:00
Scott Lahteine	6411680364	Update some pins spacing	2019-01-19 19:21:52 -06:00
teemuatlut	8a3f1d6932	Fix chopper timing struct and initialization (#12943)	2019-01-19 18:57:02 -06:00
Ludy	c6991109b7	Update German language (#12953)	2019-01-19 18:50:24 -06:00
Giuliano Zaro	ca9eb14f6a	Update Italian language (#12951)	2019-01-19 18:48:13 -06:00
Ludy	acf266fe78	Fix a compile warning, etc. (#12955)	2019-01-19 18:47:29 -06:00
Scott Lahteine	424aa05cc2	Fix some file endings	2019-01-19 18:19:12 -06:00
Scott Lahteine	ce563d7c2e	Various general cleanups ... Mostly from the L6470-oriented PR	2019-01-19 16:56:12 -06:00
Scott Lahteine	02cc63d6d4	Update CreatorPro Configuration_adv.h	2019-01-19 16:37:50 -06:00
Marcio Teixeira	f4c16e683b	Follow up fixes to #12884 (#12940)	2019-01-17 18:48:29 -06:00
Scott Lahteine	712e23c383	Fix up some whitespace	2019-01-17 18:05:36 -06:00
Ziemowit	20c20dacb7	MKS SBASE needs DRV8825 (#12911)	2019-01-17 13:21:53 -06:00
Giuliano Zaro	7bb5d4bfe8	Small LED code reorganization (#12929)	2019-01-17 13:20:26 -06:00
teemuatlut	e6805582a6	M569 to change stepping mode. Add new TMC section to LCD. (#12884)	2019-01-17 13:17:16 -06:00
Bob Kuhn	d08f27e27b	Add support for STEVAL 3DP001V1 (#12894)	2019-01-15 18:59:36 -06:00
Alain Martel	cdb562d558	Bring Migbot config up to date (#12916)	2019-01-15 18:53:07 -06:00
Giuliano Zaro	8f4c6e6d1a	Fix case light on boot (#12919)	2019-01-15 18:50:56 -06:00
Marcio Teixeira	f11c6d5d02	Fix M107 when dual-nozzles share fan (#12819) (#12909)	2019-01-15 18:45:18 -06:00
Karl Andersson	64a4649290	STM32 - Fix SD write (#12897)	2019-01-15 18:44:22 -06:00
Ludy	294521439e	Clean up Configuration_adv.h (#12900)	2019-01-15 18:42:10 -06:00
InsanityAutomation	59b18aaeef	Allow resume from pause with parking enabled (#12893) ... Currently, Pause of an SD-Memory card print does not work. This has been verified to resolve the issue by multiple people. I understand more work needs to be done to resolve some of the concerns...	2019-01-15 07:58:54 -07:00
Giuliano Zaro	85f149befe	Save some progmem (#12913)	2019-01-14 20:56:30 -06:00
mikeshub	7fde8d9d1e	Add CreatorPro / Makerbot / QIDI / etc and Mightboard RevE support (#12855) ... - Fix a bug in MAXxxxx thermocouple temp reporting. - Add support for 3-wire HD44780. - Add support for PCA9533 RGB driver. - Add configuration examples for FlashForge CreatorPro.	2019-01-14 14:29:55 -06:00
Scott Lahteine	3644c940bf	Tweak SD section of Main Menu	2019-01-13 18:00:07 -06:00
teemuatlut	1a79878dff	Remove TMC_Z_CALIBRATION in favor of Z_STEPPER_AUTO_ALIGN	2019-01-12 18:07:28 -06:00
Scott Lahteine	7cfce20cd3	Update comments on M125	2019-01-12 17:52:44 -06:00
Jason	dc4786a504	Config files for PowerWASP Printer (#12889)	2019-01-12 16:57:45 -06:00
Scott Lahteine	3e867008f0	Fix some HAL_STM32F1 type declarations	2019-01-12 16:21:11 -06:00
Scott Lahteine	eb78aed863	Rename LCD menus according to variable types (#12892)	2019-01-12 16:01:04 -06:00
InsanityAutomation	ed3ab5e212	Fix M24 not starting new job (#12887)	2019-01-12 15:30:44 -06:00
Nils Hasenbanck	f9299c4461	Make timer definition in pin files for STM32 possible (#12874) ... RemRam needs to redefine a particular timer to work correctly. The HAL did foresee this possibility and checks if the timer was already defined for either the stepper or temperature timer. Prior to this commit the header file for the timers couldn't see those definitions in the pin file, but this commit will fix this. Tested on an actual hardware to verify. (It wouldn't boot without it.)	2019-01-12 14:40:49 -06:00
InsanityAutomation	082f6a27de	ADAPTIVE_FAN_SLOWING extension to hotend thermal protection (#12853)	2019-01-12 00:41:48 -06:00
Scott Lahteine	459f4fef60	Fix Temperature::init bug with HEATER_4_PIN	2019-01-11 22:54:26 -06:00
InsanityAutomation	a403d9a50c	Improve menu pause / resume (#12876)	2019-01-11 20:42:11 -06:00
Alain Martel	432c21456f	Add 3DFabXYZ Migbot example config (#12775) ... Co-Authored-By: Alain Martel <alain74martel@gmail.com>	2019-01-11 20:41:20 -06:00
Scott Lahteine	fb8111553e	getStatus => report_status	2019-01-11 19:51:00 -06:00
Chris Pepper	2919f3045d	[LPC176x] Update PIO extrascript (#12878)	2019-01-11 19:45:33 -06:00
Scott Lahteine	19fea772e5	Use E_AXIS_N where it makes sense	2019-01-11 19:42:34 -06:00
Scott Lahteine	0d30ccf767	Tweaks to TMC26XStepper	2019-01-11 19:42:34 -06:00
HackingGulliver	1fd8e2c649	Fix: Junction Deviation calculates wrong cos(theta) on CoreXY (#12879)	2019-01-11 19:25:48 -06:00
Scott Lahteine	b402040059	Split bed size sanity check into two	2019-01-11 15:49:57 -06:00
Chris Barr	1d33784bf9	Add RUMBA32 Board (#12856)	2019-01-10 19:34:31 -06:00
Ondřej Nový	a0ef6198ff	Level bed corners Z-hop height option (#12858)	2019-01-10 19:15:17 -06:00
Karl Andersson	8ae6f1e556	Fix errors and some compiler warnings with HAL_STM32 PlatformIO build (#12869)	2019-01-10 19:01:31 -06:00
Scott Lahteine	e6484d9dab	Return to status when SD card is removed	2019-01-10 15:43:31 -06:00
Scott Lahteine	5f2d75f45b	Move PINS_DEBUGGING to @section develop	2019-01-08 20:05:05 -06:00
Scott Lahteine	da42f27c9e	Use maths macros for ceil/floor	2019-01-05 21:21:02 -06:00
Ludy	de4561c980	VORON Add LCD option BEEP_ON_FEEDRATE_CHANGE (#12822)	2019-01-05 14:12:05 -06:00
Giuliano Zaro	709a6356f7	Remove obsolete test conditions (#12829)	2019-01-05 14:02:45 -06:00
Luu Lac	bcf347403b	Fix M106 extruder & fan count (#12820)	2019-01-05 14:01:35 -06:00
Kaushik Vemparala	ba7e35cbab	Add LCD option BEEP_ON_FEEDRATE_CHANGE (#12774)	2019-01-04 19:30:08 -06:00
jmz52	d372e7e477	SDIO support for STM32F1 (#12782)	2019-01-04 13:38:07 -06:00
Marcio Teixeira	6a8fb0f25f	Simplify backlash compensation code. (#12813) ... - Use `TEST(dm,axis)` to determine directions instead of doing comparisons. - Remove recomputation of `millimeters` and `delta_mm` since backlash compensation should not affect the distance over which material is extruded.	2019-01-04 13:30:56 -06:00
luxflow	7f244f9b9c	Update LPC SD pins for BIQU SKR (#12767) ... (Exactly matching the Azteeg X5 MINI Wifi)	2019-01-03 10:44:00 -06:00
jmz52	813a4ea107	Add support for Mks Robin TFT display (#12706) ... * Add support for MKS Robin TFT display - Add support for MKS Robin TFT display and encoder for MKS Robin board. - Generic 128x64 UI with x2 upscale is used (for now). - Tested on MKS Robin TFT V2.0 with ST7789V controller.	2019-01-03 10:38:39 -06:00
jmz52	c4237b529f	Fix MKS Mini and SD card conflct over SPI mode (#12783)	2019-01-03 10:27:53 -06:00
Phr3d13	01f75591c6	Fix GTM32_PRO_VB Serial and HAL via watchdog (#12753) ... Move `watchdog_reset` from `.h` to `.cpp` to eliminate the need to include `MarlinConfig.h` in a HAL-related file.	2019-01-03 09:46:49 -06:00
Scott Lahteine	288340cb6c	Followup to VORON	2019-01-03 09:14:14 -06:00
Scott Lahteine	2aaa681dea	Remove unused Cheaptronic pins	2019-01-03 08:58:55 -06:00
Marcio Teixeira	81e753064a	Fix ExtUI compile warnings and error (#12799)	2019-01-03 08:36:43 -06:00
Ludy	74c47803f7	Add VORON printer (#12705)	2019-01-03 06:27:03 -06:00
kAdonis	637fb20c75	Allow 4 fan animation frames (#12772)	2019-01-03 06:03:06 -06:00
petieken	d9cf5e4883	Update pins_BIQU_SKR_V1.1.h (#12758)	2019-01-02 13:50:05 -06:00
TheLongAndOnly	cb643d87df	Adding missing code for triple Z-stepper auto-align (#12786)	2019-01-01 18:22:04 -06:00
Ludy	14a7faf087	Fix compile warning comparison uint and int (#12788)	2019-01-01 18:20:12 -06:00
Marcio Teixeira	60cb36bef3	Misc. improvements (#12747) ... * Make ExtUI respect MAXTEMP limits - Temperatures are now clamped by MAXTEMP limits rather than arbitrary values. * Speed up USB init, add status - Speed up USB initialization - Show status message if init failed * Enable status messages for EXTENSIBLE_UI * Adjust max limit to MAX_TEMP - 15 * Misc. tweaks to formatting, const, etc.	2019-01-01 15:17:48 -06:00
InsanityAutomation	4f2473053c	Fix M106 with SINGLENOZZLE	2018-12-31 20:10:18 -06:00
Reece Kibble	7557f8d68c	Rename all Stm32f1 to STM32F1 (#12639)	2018-12-31 16:36:49 -06:00
Scott Lahteine	371d9a1acf	Fix line-endings, formatting, whitespace ... Followup to #12770	2018-12-30 15:38:20 -06:00
Ludy	135c74017c	Fix compile DEBUG_EEPROM_READWRITE error (#12746)	2018-12-30 11:37:20 -06:00
Giuliano Zaro	54ba44ee37	Fix bad sanitycheck (#12748)	2018-12-30 10:44:15 -06:00
swilkens	b01a630bd0	[2.0.x] Correct Ender 3 bed size (#12769)	2018-12-30 10:42:47 -06:00
Alain Martel	44ed34475b	Add MKS BASE 1.4 pins (#12770)	2018-12-30 10:40:22 -06:00
Roxy-3D	3a16cb6d7f	Slightly Slower Max X Axis speed ... On some T-Rex 2+ machines the previous max step rate could lose steps....	2018-12-28 09:14:48 -06:00
Ludy	814d93c7cf	Fix G33 sprintf output warning (#12738)	2018-12-27 18:05:42 -06:00
Ludy	3877bf9704	Fix compile error with delta and sensorless homing (#12740)	2018-12-27 17:51:22 -06:00
Ludy	cfc5e96b4b	Move JD to Config.h (and fix jerk->eeprom bug) (#12720)	2018-12-27 15:29:39 -06:00
Roman Moravčík	594898aea7	Limit hotend / bed temperature to maxtemp-15 (#12713)	2018-12-27 11:46:05 -06:00
InsanityAutomation	530ef5846f	Make nomove=false for toolchange on filament swap (#12739)	2018-12-27 11:38:35 -06:00
InsanityAutomation	14ddda285c	Confirmation on Abort SD print (#12717)	2018-12-27 11:36:39 -06:00
Msq001	f8c5d31864	Bugfix 2.0.x add motherboard pins define (#12689) ... - `pins_BIQU_B300_V1.0.h` defines pins for B300, as found in the BIQU Thunder 3D printer. - `pins_BIQU_SKR_V1.1.h` defines pins for bigtree/BIQU SKR V1.1 motherboard.	2018-12-27 10:52:35 -06:00
InsanityAutomation	b7a8dcc35d	Update Formbot T-Rex 3 pins (#12662)	2018-12-20 17:32:39 -06:00
Ludy	f7127c44f8	Wanhao Duplicator i3 Plus pins create (#12701)	2018-12-20 17:30:36 -06:00
jmz52	33abb86b7e	Add support for MKS Robin board (#12650) ... Implement initial support for MKS Robin (STM32F103ZET6) board. Custom build script is used to generate encrypted firmware compatible with original MSK Robin bootloader (i.e. safe firmware update from SD card and possibility to go back to original close-source firmware).	2018-12-20 17:23:27 -06:00
InsanityAutomation	367a9f65aa	Add Formbot 350c Thermistor (#12661)	2018-12-20 17:04:17 -06:00
Ludy	33f3c75213	GTM32 Pro VB FAN-PIN correction (#12666)	2018-12-20 16:42:15 -06:00
Scott Lahteine	9d59a9c840	Followup to #12691 (typo)	2018-12-20 16:38:32 -06:00
Ludy	3829d6ccf8	FYSETC F6 13 - E2_SERIAL_TX_PIN correction (#12667)	2018-12-20 16:11:33 -06:00
Kadah	d35dcafa3d	Added MKS MINI 12864 support to FYSETC F6 V1.3 (#12656)	2018-12-20 16:10:49 -06:00
Roman Moravčík	98cf546771	Limit set hotend temperature to maxtemp. (#12690)	2018-12-20 15:56:37 -06:00
Roman Moravčík	4dad489a50	[2.0.x] Limit PID autotune target to maxtemp-15 (#12691)	2018-12-20 15:55:30 -06:00
Marcio Teixeira	8dcc28c9ae	Squelch warning mentioned in #11061 (#12676)	2018-12-20 15:34:24 -06:00
Ondřej Nový	4c8a6eee7b	[2.0.x] Update Czech translation (#12683)	2018-12-20 15:28:46 -06:00
Ondřej Nový	fcaed685b2	[2.0.x] Set DEFAULT_NOMINAL_FILAMENT_DIA to 1.75 in Anet A6 config (#12664)	2018-12-18 13:35:59 -06:00
Ondřej Nový	0572be9439	[2.0.x] Enable PIDTEMPBED in Anet A8 example config (#12655)	2018-12-18 13:34:46 -06:00
Luc Van Daele	c6e09c2689	[2.0.x] G33 clean up (#12648) ... Remove obsolete workarounds in G33 for the now fixed zprobe_zoffset bug	2018-12-18 12:43:38 -06:00
teemuatlut	7a5e637a37	Add spreadCycle parameter sets (#12645)	2018-12-18 12:42:14 -06:00
Marcio Teixeira	902d5b0f8b	Allow ExtUI to use LCD_SET_PROGRESS_MANUALLY (#12628)	2018-12-12 17:21:37 -06:00
Dave Johnson	9a4a463ec4	Sanity-check LIGHTWEIGHT_UI, move comment up (#12630)	2018-12-12 16:59:20 -06:00
teemuatlut	55144284c2	TMC connection test, spreadCycle parameters, improved debugging (#12616)	2018-12-09 20:54:48 -06:00
Ludy	97de9d54a5	Fix broken pins file include (#12617)	2018-12-09 19:06:03 -06:00
Ludy	a7b3a61424	Improve some config comments readability (#12615)	2018-12-09 19:02:42 -06:00
Scott Lahteine	daf07e4200	Align classic bed icon consistently	2018-12-09 12:00:10 -06:00
MasterPIC	3bb8b3529a	Center ABL grid on bed with H parameter. (#12610)	2018-12-09 11:24:48 -06:00
Scott Lahteine	6cf8d40f41	Fix some serial echos of pin states	2018-12-09 02:38:32 -06:00
Scott Lahteine	f6321f878a	Simpler AVR + Trinamic + Soft Serial sanity-check (#12606)	2018-12-08 23:34:26 -06:00
Scott Lahteine	7d15854514	Add Z_MIN_PROBE_PIN to MKS SBASE pins	2018-12-08 15:31:59 -06:00
Scott Lahteine	e8bda62d2a	Followup to servo angles patch ... Fix #12594	2018-12-08 15:31:59 -06:00
Scott Lahteine	18fedafbc5	Refresh screen on SD Init	2018-12-08 15:31:59 -06:00
Marcio Teixeira	b22716e938	M425 Backlash Correction (#11061)	2018-12-08 14:36:46 -06:00
Scott Lahteine	fa47ce369a	Sanity-check for negative steps, feedrate, accel	2018-12-07 19:38:15 -06:00
Scott Lahteine	ef81b5f03e	Link to font docs in ultralcd_DOGM.cpp	2018-12-07 19:10:55 -06:00
Scott Lahteine	4388015f1a	Tweak config formatting	2018-12-07 16:57:14 -06:00
Scott Lahteine	b7e38ea249	Signal an invalid mesh for M420 enable / load	2018-12-07 16:14:11 -06:00
teemuatlut	50b2fbd031	Trinamic: Split stealthChop, improve driver monitoring, etc. (#12582)	2018-12-07 15:34:21 -06:00
Scott Lahteine	9fbd73d931	Fix up some delta settings	2018-12-05 18:57:47 -06:00
Dave Johnson	0947b92734	Build and CI fixes and optimizations (#12584) ... -Disable LDF "deep+" mode on AT90USB platforms. Appears not needed any longer (likely due to fix 7322df26ad). Results in identical binary output and cuts compile time in half -Disable Cartesio config from CircleCI (compile failure) -Disable Geetech I3 Pro X GT2560 from CircleCI (compile failure) -Enable EEPROM on Micromake example config (fix compile failure) -Move FolgerTech/i3-2020 to AVR platform in CircleCI (fix CirculeCI build failure) -Disable various examples failing to build in CircleCI -Enable various examples no longer failing to build in CircleCI	2018-12-05 17:21:40 -06:00
mr-miky	11c7945365	Don't include STM32 Core code when compiling STM32 Generic (#12575)	2018-12-03 06:55:49 -06:00
Scott Lahteine	64389acdf1	Print a space after scrolling status	2018-12-03 06:17:09 -06:00
Scott Lahteine	7a361ad36a	Alternative fan image option (#12579) ... * Alternative fan bitmap * Move bed over by 3px	2018-12-03 05:55:33 -06:00
Scott Lahteine	261c6f4b96	Fix pause/resume SD print ... Followup to #12551, addressing #12566	2018-11-30 19:23:08 -06:00
Scott Lahteine	2224a4d61a	Remove AVR-only MARLIN_DEV_MODE code	2018-11-30 17:54:24 -06:00
Scott Lahteine	e874f9664c	Tweaks to endstops code	2018-11-30 14:25:55 -06:00
Scott Lahteine	3c58b16c9f	Move stepper enable/disable to stepper_indirection.h (#12562)	2018-11-30 12:48:46 -06:00
Scott Lahteine	aaf862aef2	Fix angles for disabled EDITABLE_SERVO_ANGLES (#12559)	2018-11-30 12:31:42 -06:00
Scott Lahteine	c986239837	A single SERIAL_ECHO macro type (#12557)	2018-11-29 16:58:58 -06:00
Scott Lahteine	69d869c3d9	Tweak FR icon. Update font data.	2018-11-29 12:59:30 -06:00
Scott Lahteine	0c1cd9f590	Fix "No SD Card" indicator	2018-11-29 12:35:31 -06:00
Jacob Jordan	8be91677df	Fix Skew factors (#12555) ... - Ensure Skew factors are calculated from test square measurements	2018-11-29 11:39:31 -06:00
Scott Lahteine	03ef2d6c82	Fix "paused" message and M125 called by M25 (#12551)	2018-11-28 19:28:31 -06:00
Scott Lahteine	95d154a91f	Fans loop macro	2018-11-28 16:45:08 -06:00
Scott Lahteine	61db0b65b6	Followup to heating progress	2018-11-28 14:47:43 -06:00
Scott Lahteine	4f9ec9ab45	Add heating progress bars (#12543)	2018-11-27 21:15:52 -06:00
Scott Lahteine	929a513a6b	Add poll_runout_states, which returns 1 for runouts (#12547)	2018-11-27 20:13:24 -06:00
Scott Lahteine	01b5c810d5	Space out multiple edit lines a bit	2018-11-27 18:10:19 -06:00
Scott Lahteine	cd88ea2106	Fix runout debug output ... Followup to #12544	2018-11-27 18:10:19 -06:00
Scott Lahteine	cecc238f68	Save recovery info on SD pause	2018-11-27 14:42:19 -06:00
Marcio Teixeira	439a3e8463	Improve runout sensor, fix LIGHTWEIGHT_UI screen size (#12544)	2018-11-27 13:45:25 -06:00
Scott Lahteine	5b24ce9024	Hide M217 compile warning	2018-11-26 16:52:16 -06:00
David Bates	d94b50a3d8	Add sample config for Delta with MKS SBASE (#10819)	2018-11-25 21:23:02 -06:00
InsanityAutomation	dec721c52b	Add Formbot Raptor2 and Raise3D pins (#12532) ... * Add Formbot Raptor2 board * Add Raise3D Rumba board	2018-11-25 19:56:06 -06:00
Scott Lahteine	6aae199572	Add missing boards to Makefile	2018-11-25 19:11:09 -06:00
Scott Lahteine	0a638cc022	Adjust Formbot Raptor pins	2018-11-25 18:35:45 -06:00
Ludy	e5019a0481	Fix English special symbols (#12529)	2018-11-25 18:19:12 -06:00
Scott Lahteine	09d6db491a	Fix wait_for_bed compile error	2018-11-25 18:05:41 -06:00
Roman Moravčík	d545f984b0	Update Slovak translation (#12523)	2018-11-25 17:44:51 -06:00
Ludy	730f223100	Correct FANMUX2_PIN (#12538)	2018-11-25 17:27:41 -06:00
Yücel Temel	d857cdfb27	Update Turkish language (#12524)	2018-11-25 17:26:26 -06:00
Scott Lahteine	4a7c6f7241	NUM_ARRAY => COUNT	2018-11-24 00:27:45 -06:00
Giuliano Zaro	31113c5adf	Update Italian language (#12512)	2018-11-24 00:26:54 -06:00
Scott Lahteine	b57343c255	Put status screen options in Configuration_adv.h	2018-11-23 23:15:07 -06:00
Scott Lahteine	1fcc13b011	Allow Serial Overrun Protection to be disabled	2018-11-23 21:07:38 -06:00
Scott Lahteine	29c53f2402	Hide some compile warnings	2018-11-23 21:07:38 -06:00
Scott Lahteine	caca3c8503	Use wait_for_bed with WAIT_FOR_BED_HEATER ... Addressing #12517	2018-11-23 20:39:23 -06:00
Scott Lahteine	f1efcfed14	Fix backslash in language_test.h	2018-11-23 20:39:23 -06:00
Yücel Temel	3b186a55ac	Don't show superscript ³ with NOT_EXTENDED_ISO10646_1_5X7 (#12513)	2018-11-23 20:16:51 -06:00
Scott Lahteine	82c96c971e	Bring superscripts slightly lower in BDF fonts	2018-11-23 20:02:34 -06:00
Sinisa Culic	8a0992d921	Fast PWM for controller fan (#12485)	2018-11-23 16:03:39 -06:00
Ludy	e98d195901	Remove extra declarations in cardreader.cpp (#12520)	2018-11-23 15:58:20 -06:00
Scott Lahteine	fd2998efd5	Revert ADC_KEYPAD direction behavior (#12508)	2018-11-22 06:00:00 -06:00
Scott Lahteine	d29cb09b3e	Fix a minor compile warning	2018-11-22 05:35:38 -06:00
Yücel Temel	5b1d52671c	Use superscript 3 in language_en.h (#12504)	2018-11-22 02:27:28 -06:00
Marcio Teixeira	7109dadd21	Additional pin definitions for Archim 2 (#12500) ... - Added GPIO pins to Archim 2 - Added new 108 pin to `fastio_Due.h`	2018-11-22 01:07:02 -06:00
Andy Shaw	4975b13b74	Fix problems with LPC1768 EEPROM flash emulation (#12503) ... * Remove duplicate calls to PrepareSector Some flash memory API calls require that a call to `PrepareSector` is done before use. However this call is already made by the LPC1768 framework so the calls in this code are not required. * Ensure correct alignment of RAM buffer The LPC176X flash API requires that the RAM buffer used for write operations must be word-aligned. This change ensures that this is the case.	2018-11-22 01:03:32 -06:00
Scott Lahteine	b738972e69	General cleanup of Re-ARM pins	2018-11-21 19:00:49 -06:00
Scott Lahteine	ee423dcdd0	Invert hotend bitmaps, by default	2018-11-21 01:02:06 -06:00
Scott Lahteine	c5642a894f	Fix ADC_KEYPAD middle button (#12493)	2018-11-20 21:39:30 -06:00
Scott Lahteine	0946cbcdca	Revert some const changes (for now)	2018-11-20 08:19:48 -06:00
Scott Lahteine	4def8b3b5e	Expanded options for _Statusscreen.h (#12455) ... See the PR for full details. The updated system will be documented on the website in the near future.	2018-11-20 07:50:37 -06:00
Scott Lahteine	d51e5690f4	Don't show updir with no card present	2018-11-20 07:01:46 -06:00
Scott Lahteine	ec9d21a234	Shift YZ on graphical display to fit Z+123.45	2018-11-20 06:58:18 -06:00
Scott Lahteine	817a37169a	Apply/unapply const here and there	2018-11-20 06:44:21 -06:00
Scott Lahteine	643e0066a0	Followup to #12451	2018-11-20 06:27:19 -06:00
Marcio Teixeira	4bcb63b705	Fix for #12482 (#12483) ... Fix Z-move to uninitialized position in SWITCHING_EXTRUDERS tool_change (no_move=true)	2018-11-20 00:04:11 -06:00
Marcio Teixeira	50ee747787	Fix compilation errors. Followup to #12439 (#12481)	2018-11-20 00:02:13 -06:00
Ludy	90a58488b5	Corrected unused var, default switch, Travis tests (#12477)	2018-11-19 23:59:48 -06:00
Scott Lahteine	a4c15dc54f	Modify MBL to use IJ instead of XY (#12478)	2018-11-19 09:08:15 -06:00
Scott Lahteine	fc3f1c4572	Get u8g reference for lcdprint	2018-11-19 06:23:15 -06:00
Scott Lahteine	88c57eaf55	Clean up some u8g code (#12476)	2018-11-19 01:33:59 -06:00
Ludy	1f93d2bcf7	Fix LCD compile error, etc. (#12472)	2018-11-18 20:39:49 -06:00
Scott Lahteine	826d570162	Combine Travis CI option-setting commands (#12474)	2018-11-18 19:58:02 -06:00
Scott Lahteine	9d13f07d09	GTM32 Pro VB changes from Markku Sinisalo	2018-11-18 19:56:38 -06:00
Roman Moravčík	5fbe5cabc8	Fixed displaying of kill MSG_OUTAGE_RECOVERY string. (#12470)	2018-11-18 18:05:29 -06:00
kAdonis	4ae9a06c60	Update M303.cpp (#12471)	2018-11-18 18:04:51 -06:00
Ludy	c0b75f49b6	Fix "no effect" and "unused variable" compile warnings (#12473)	2018-11-18 17:54:00 -06:00
Nils Hasenbanck	5a4fd8e0a6	Fix access to the DWT peripheral for STM32 HAL (#12434) ... Access to the DWT peripheral for the `CYCCNT` register needs to happen before `main()`. The code needs to be called after the setup of the system clocks, so the right place is between the `premain()` and `main()` function of the STM32 Arduino core. This patch moves the DWT access code to a new function, which is then placed between `premain()` and `main()`.	2018-11-18 01:30:46 -06:00
Scott Lahteine	7f225b9421	Fix MAX_MESSAGE_LENGTH	2018-11-18 01:11:26 -06:00
Scott Lahteine	06674a321a	Remove extra include	2018-11-18 00:34:07 -06:00
Marcio Teixeira	c1e17037e5	Various fixes for MarlinUI and ExtUI (#12439)	2018-11-17 22:21:44 -06:00
Giuliano Zaro	d3605cfc26	Don't start watching heaters when target is 0 (#12453)	2018-11-17 21:53:52 -06:00
Ludy	93e958f695	Fix compile error with ZONESTAR_LCD+NO_LCD_MENUS (#12466)	2018-11-17 21:21:30 -06:00
Ludy	22d7fed60a	Fix compile error with SD_FIRMWARE_UPDATE (#12462)	2018-11-17 21:13:36 -06:00
Nils Hasenbanck	779b2709ec	Change temperature pin order for RemRam V1 (#12458) ... Beta testers suggested to adopt the RAMPS order of temperature probe connectors. This commit fixes the order to the RAMPS order.	2018-11-17 16:51:06 -06:00
Scott Lahteine	8ebb4dc294	Followup to static CardReader	2018-11-17 07:52:35 -06:00
Scott Lahteine	7ee5894360	Allow float XY probe offsets ... Responding to #12383 XY probe offsets should be integers because adding decimal points makes the code larger. But if decimals are very much wanted, this commit removes the old restriction.	2018-11-17 07:44:47 -06:00
Giuliano Zaro	43ecdb606f	Fix a compile warning (#12452)	2018-11-17 07:08:25 -06:00
Ph0non	984c4ba8c7	Enable SD Card on RepRap Display and RADDS (#12446) ... * Enable SD Card on RepRap Display and RADDS Define the necessary pins in `pins_RADDS.h` (copied from the `RADDS_DISPLAY` section) for the use of the SD card slot on RRD.	2018-11-17 06:59:40 -06:00
Ludy	56a94c2a26	Use 'target_extruder' in M104 as with M109 (#12448)	2018-11-17 06:55:25 -06:00
Scott Lahteine	66580f32c2	Make CardReader class static (#12451) ... * Make CardReader a static class * Make CardReader flags into bitfields	2018-11-16 22:39:16 -06:00
Scott Lahteine	3e9ffaddb6	Consolidate, optimize some LCD menu code (#12450)	2018-11-16 21:44:48 -06:00
Scott Lahteine	d97e31db4c	Optimize Power-Loss Recovery (#12440)	2018-11-16 20:47:07 -06:00
Mateusz Krawczuk	ca21ac6b9b	Support two MAX6675 thermocouples (#8686)	2018-11-16 18:20:33 -06:00
Scott Lahteine	0e610815e4	No need for Cap:PAREN_COMMENTS	2018-11-16 04:28:40 -06:00
Scott Lahteine	7a075a5dc9	Tweak extruder errors	2018-11-16 01:32:21 -06:00
Scott Lahteine	2d92f333f5	Fix GcodeSuite::T active_extruder reference	2018-11-15 14:07:24 -06:00
Scott Lahteine	d2bb53702a	Optimize target_extruder, ignore T with mixing (#12432) ... * Optimize target_extruder, ignore T with mixing * Give G-code Tn parity with tool_change	2018-11-14 17:33:04 -06:00
Marcio Teixeira	5e586a6b39	Fix to runout sensor code. (#12431) ... - "old_state" is no longer a class static variable.	2018-11-14 16:54:05 -06:00
Scott Lahteine	d82c350de7	Miscellaneous LCD code renaming, reordering (#12430) ... * Move special characters to language.h * Apply some naming standards * Clean up menu item draw functions * Rename some Temperature methods * UI => ExtUI	2018-11-14 13:13:51 -06:00
Scott Lahteine	edfd106bc5	Rejigger Filament Runout class (#12428)	2018-11-14 11:45:57 -06:00
Scott Lahteine	f4c128ecaa	Move RRW keypad code to a common method (#12429)	2018-11-14 06:00:21 -06:00
Scott Lahteine	54ec5528a0	hasstatus => has_status	2018-11-14 01:34:28 -06:00
Scott Lahteine	ebf585b673	Fix an old sanity check	2018-11-14 01:15:35 -06:00
Ryan	052d102ded	UltiMachine Archim 1 support (#12404)	2018-11-14 00:27:39 -06:00
Scott Lahteine	664e20754d	Clean up pins files	2018-11-14 00:23:33 -06:00
Scott Lahteine	1eb5249598	Fix Formbot Trex-2+ configs ... Followup to #12422	2018-11-13 21:53:54 -06:00
thiagodesacosta	075a22ed65	Update Portuguese-Brazilian translation (#12402)	2018-11-13 19:42:25 -06:00
Marcio Teixeira	3ceab8474c	Add required "cardreader.h" include (#12419)	2018-11-13 17:12:44 -06:00
Giuliano Zaro	98c2fc4e42	Endstops fix followup (#12423) ... Followup to #12413	2018-11-13 17:10:07 -06:00
Roxy-3D	f19fd642ce	Updates to Formbot T-Rex 2+ configuration files (#12422) ... Updates to Formbot T-Rex 2+ configuration files	2018-11-13 13:48:35 -06:00
Roxy-3D	cda5ef08fa	Debug of G2-G3 for UBL (#12386) ... Changes only affect UBL. Everything else is left alone.	2018-11-13 11:20:21 -06:00
AnHardt	9ad3aed0ef	Fix tool-change for MIXING_EXTRUDER with < 2 virtual tools (#12417) ... Fix #12416 Better handling of `ENABLED(MIXING_EXTRUDER) && !MIXING_VIRTUAL_TOOLS > 1` - to not fall through to the general case. Fix compiler warnings for `#elif EXTRUDERS < 2`.	2018-11-13 04:56:10 -06:00
Giuliano Zaro	d631267548	Refine endstops fixes (#12413) ... When endstops/probe are enabled `ENDSTOP_NOISE_THRESHOLD` calls to `update` are required to properly re-sync endstops/probe status.	2018-11-13 04:31:58 -06:00
Scott Lahteine	0ee1a92971	Group status methods, share reset_status with Extensible UI (#12414) ... * Group status methods, share reset_status with Extensible UI * Move common DOGM code to headers	2018-11-13 01:47:45 -06:00
Scott Lahteine	690c4e8457	Clean TLM trailing whitespace	2018-11-13 00:03:34 -06:00
Scott Lahteine	143b2896e0	Add M412 to enable/disable filament runout detection (#12406)	2018-11-12 21:29:46 -06:00
Scott Lahteine	a163c89c6a	Followup to 50af1d1	2018-11-12 20:31:53 -06:00
AnHardt	be6271767f	Fix BABYSTEP_ZPROBE_OFFSET (#12408) ... Fix #12399 Did not compile without `WATCH_HOTENDS || WATCH_THE_BED`. Add condition to include "../../module/temperature.h".	2018-11-12 17:44:21 -06:00
Scott Lahteine	50af1d1e08	Differentiate translated On/Off from Serial ON/OFF	2018-11-12 17:23:08 -06:00
Scott Lahteine	df907a905f	Update UBL comments for debug change	2018-11-12 03:46:48 -06:00
Scott Lahteine	da17f8ad37	For now (!) don't synchronize in M204 and M205 ... See if this has any deleterious effect on motion planning by slicers that inser their own jerk and acceleration controls. The problem I see is that these settings can take effect on blocks already in the planner, and the only way around this would be to shadow these settings in planner blocks and use the shadowed settings in the planner.	2018-11-12 02:43:24 -06:00
Scott Lahteine	a3923424c7	Clean up LCD width/height determination	2018-11-12 02:37:40 -06:00
Scott Lahteine	a0c795b097	Encapsulate common display code in a singleton (#12395) ... * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.	2018-11-11 12:16:24 -06:00
Scott Lahteine	9da6809ac3	Adjust some comment spacing	2018-11-11 11:28:50 -06:00
Scott Lahteine	471f403a67	Reduce code size with plain inlines	2018-11-11 08:36:10 -06:00
Scott Lahteine	30a49f5ee2	Apply extra condition to LCD_PROGRESS_BAR	2018-11-11 08:36:10 -06:00
Scott Lahteine	4e0c935959	Update HAL and libs formatting	2018-11-10 19:43:23 -06:00
Scott Lahteine	47483e8c17	Update Raptor config	2018-11-10 19:42:46 -06:00
Scott Lahteine	6093df11dc	Allow G26 to use the active extruder (#12387) ... * Make lcd_quick_feedback argument optional * Add click_to_cancel option to wait_for_hotend/bed * Have G26 use the active nozzle and wait_for_hotend/bed * Use wait_for_release in UBL G29 * Add 'T' parameter to G26 for an initial tool-change	2018-11-10 18:07:38 -06:00
articide	4260282df7	Tevo Little Monster example configuration (#12370)	2018-11-10 03:36:01 -06:00
Scott Lahteine	bed15fcd81	Tweak 'echo_not_entered' used by MBL's G29	2018-11-10 01:32:51 -06:00
Scott Lahteine	c239131ff5	Use 'serial_spaces' in 'print_2d_array'	2018-11-10 01:32:51 -06:00
Scott Lahteine	56150ec030	Add reference comments to MeshLevelingState	2018-11-09 21:31:20 -06:00
Ludy	24c5e57bb6	Update German language (#12379)	2018-11-09 15:25:29 -06:00
Giuliano Zaro	fd7fd55662	Solve endstops issues (#12382) ... - Partially reverts #11900 and tries to solve #12336	2018-11-09 14:58:04 -06:00
Scott Lahteine	78ccedd6a8	Fix M91x sanity-check to permit TMC2660 ... Fix #12362	2018-11-09 05:48:15 -06:00
revilor	b60abc7c37	[2.0.x] Macro G-codes (#9365)	2018-11-09 05:25:08 -06:00
Giuliano Zaro	ccdbf20f60	Update Italian language (#12368)	2018-11-09 04:04:02 -06:00
Roman Moravčík	d08847b1a6	Update Slovak translation (#12376)	2018-11-09 04:03:07 -06:00
InsanityAutomation	7665dff58b	No error on T0 with single-extruder and fix MIXING_EXTRUDER virtual tools (#12375)	2018-11-09 00:15:07 -06:00
Scott Lahteine	4ed6397e5d	More comprehensive NO_LCD_MENUS (#12367)	2018-11-09 00:07:16 -06:00
Scott Lahteine	9c8f083d6c	Extend pins errors to include the processor	2018-11-08 22:25:59 -06:00
Scott Lahteine	525ea554a1	Remove obsolete comments	2018-11-08 10:55:18 -06:00
Scott Lahteine	ef724edd80	Apply HAS_LCD_MENU in EEPROM code	2018-11-08 10:03:05 -06:00
Scott Lahteine	b169320a03	Clean trailing whitespace	2018-11-07 02:40:18 -06:00
Scott Lahteine	81b1e9d272	Fix up xdiff, ydiff, zdiff in tool change ... Followup to #12137	2018-11-06 22:56:33 -06:00
InsanityAutomation	6471a75a22	Combine more tool-change variables (#12137)	2018-11-06 22:22:20 -06:00
Scott Lahteine	147e270208	Restore GTM32_PRO_VB temp and heater pins ... Undo #12345	2018-11-06 21:41:30 -06:00
Scott Lahteine	8def25e475	Set CUSTOM_MACHINE_NAME for some configs	2018-11-06 21:41:30 -06:00
Scott Lahteine	812f6a7dd7	Fix Resume from SD Pause ... In reference to https://github.com/MarlinFirmware/Marlin/pull/12098#issuecomment-436231690	2018-11-06 21:09:37 -06:00
Scott Lahteine	4f72e041f2	Use card.stopSDPrint() for completeness	2018-11-06 20:55:17 -06:00
Scott Lahteine	488a17b3f5	Use IS_SD_PRINTING() more	2018-11-06 20:55:17 -06:00
Marcio Teixeira	4dbaa6369f	Fix const pointer assignment compile error (#12350)	2018-11-06 19:49:39 -06:00
Giuliano Zaro	959ed32636	Update Italian language (#12352)	2018-11-06 19:30:24 -06:00
Roman Moravčík	812bfec65e	Update Slovak translation (#12354)	2018-11-06 19:29:28 -06:00
Ludy	1624722566	Update German translation (#12355)	2018-11-06 19:28:40 -06:00
Scott Lahteine	e574f01568	More advanced pause tweaks (#12356) ... * Followup to LCD_TIMEOUT_TO_STATUS=0 * Make continuous purge screen fit 20x4 * Unify purge message modes * Preserve last-set pause header mode	2018-11-06 19:25:57 -06:00
Scott Lahteine	5a470d4a49	Apply some tool-change cleanup	2018-11-06 18:20:01 -06:00
Roman Moravčík	34ea458667	Fixed advanced pause messages (#12353)	2018-11-06 15:27:19 -06:00
Scott Lahteine	4c5ca89d8c	Show the appropriate pause message (#12348)	2018-11-06 04:13:48 -06:00
Marcio Teixeira	8517d5f915	LCD menu code refactoring and cleanup (#12308)	2018-11-05 22:51:10 -06:00
Scott Lahteine	b3b4e6dc45	Change Marlin debug flag names to fix conflicts (#12340) ... In reference to #11000	2018-11-05 22:48:28 -06:00
Giuliano Zaro	f7e682eeee	Update Italian language (#12344)	2018-11-05 22:46:59 -06:00
Phr3d13	a813900fce	Add Geeetech Rostock 301 config, update GTM32 Pro VB pins (#12345)	2018-11-05 22:42:06 -06:00
Scott Lahteine	04f173790f	Remove trailing whitespace	2018-11-05 22:38:20 -06:00
Scott Lahteine	c536ee1122	Clean up bq Zum Mega 3D pins	2018-11-05 22:38:20 -06:00
Scott Lahteine	c31e1735dd	Restore LPC1768_PIN_INTERRUPT_M, apply to Z3 ... - In reference to #12166	2018-11-05 06:28:49 -06:00
Scott Lahteine	93d5b945dd	Hide mesh editing until a valid mesh exists	2018-11-05 05:13:34 -06:00
Ludy	f34f09c821	Update German language (#12336)	2018-11-05 04:33:31 -06:00
Roman Moravčík	eefd7676a3	Updated slovak translation (#12338)	2018-11-05 04:31:12 -06:00
Scott Lahteine	486f2a66a9	Fix MBL XY parameter error messages ... Fix #11522	2018-11-05 04:17:37 -06:00
Scott Lahteine	2613ddf61c	Fix "circle"	2018-11-05 04:17:37 -06:00
Scott Lahteine	b779b42ffd	Prevent current step-down going negative ... Addressing #11348	2018-11-05 04:17:37 -06:00
Scott Lahteine	427bc64ba1	G28 O respects HOME_AFTER_DEACTIVATE ... Addressing #11271	2018-11-05 04:17:37 -06:00
Scott Lahteine	3866aeac52	Clean up ENCODER_RATE_MULTIPLIER config	2018-11-05 04:17:37 -06:00
Scott Lahteine	498dfa291e	Update and fix CHDK	2018-11-05 04:17:37 -06:00
Scott Lahteine	fed84f2961	Use multiplier edit item for mesh point editing	2018-11-05 04:17:37 -06:00
Scott Lahteine	d5ab4cd22a	Provide a default for Z_PROBE_LOW_POINT	2018-11-05 04:17:37 -06:00
Scott Lahteine	3cbc3ecdd7	Fix 'M43 T' to use 'L' as last pin ... - The documentation is correct. The code was wrong.	2018-11-05 04:17:37 -06:00
Scott Lahteine	1769249876	Recommend keeping endstops off	2018-11-05 04:17:37 -06:00
Scott Lahteine	5182eaf661	Fix endstops enable behavior during probing ... Fix a bug introduced in #9582	2018-11-05 04:17:37 -06:00
Scott Lahteine	07a0822ebe	M420 support in MARLIN_DEV_MODE	2018-11-04 20:54:38 -06:00
Scott Lahteine	63be48ada6	Add MESH_EDIT_MENU to example configs	2018-11-04 19:07:47 -06:00
KangDroid	82ff7c6542	Add a mesh edit menu for MBL / ABL-Bilinear	2018-11-04 19:07:47 -06:00
Scott Lahteine	44fa7fb18c	Cleanups for leveling-related code	2018-11-04 19:07:47 -06:00
Scott Lahteine	cc2bc67440	ENABLED(NEWPANEL) => HAS_LCD_MENU	2018-11-04 19:06:10 -06:00
Scott Lahteine	fc84878cba	MSG_UBL_EDIT_MESH_MENU => MSG_EDIT_MESH	2018-11-04 19:06:10 -06:00
Scott Lahteine	cd066bfeba	Extend error messages for E factors sanity-checks	2018-11-04 18:42:56 -06:00
Ludy	c10edb0998	Update, correct sanity-checks for up to 6 extruders (#12333)	2018-11-04 18:36:45 -06:00
Scott Lahteine	0c85869c26	Clean up file endings	2018-11-04 18:30:10 -06:00
Scott Lahteine	b99f0776d6	Clean up some U8G files	2018-11-04 18:30:10 -06:00
Scott Lahteine	8014e1cc9d	Allow disable of LCD_TIMEOUT_TO_STATUS (when 0)	2018-11-04 18:30:10 -06:00
Giuliano Zaro	bd05816fd8	Update Italian language (#12327)	2018-11-04 16:43:02 -06:00
Scott Lahteine	3c21483c88	Provide DOGLCD SPI pins for MKS SBASE + VIKI	2018-11-04 16:20:22 -06:00
Scott Lahteine	e0956bb572	Drop 'register' storage specifier	2018-11-04 16:17:13 -06:00
Scott Lahteine	c04cf127f7	Fix EEPROM servo angles init, section grouping	2018-11-04 16:14:54 -06:00
Scott Lahteine	9c0e05552e	Suppress some compile warnings	2018-11-04 15:25:31 -06:00
Karl Andersson	176654791e	Use board-specific or platform SPI pins in HAL_STM32 (#12323)	2018-11-04 15:03:45 -06:00
Scott Lahteine	60dbd8161c	Fix VMAX editing ... Fix #12326	2018-11-04 07:06:14 -06:00
Scott Lahteine	b7ca93ba37	Remove dead comment	2018-11-04 06:10:35 -06:00
Scott Lahteine	608be966d7	Add servos to pins_FYSTEC_F6_13.h	2018-11-04 06:10:35 -06:00
Hannes Brandstätter-Müller	67b22760d9	Return to status to show manual deploy/stow messages (#12324)	2018-11-04 04:51:26 -06:00
tharts	f5e8e8b53d	Fix broken LPC176x build (#12317) ... * Fix broken LPC176x build * Add UBL+HD44780 test for LPC1768	2018-11-04 04:25:03 -06:00
Scott Lahteine	f5eab912ed	Apply #pragma once, misc cleanup (#12322) ... * Apply #pragma once in headers * Adjust some thermistors formatting * Misc cleanup and formatting	2018-11-04 02:25:55 -06:00
Scott Lahteine	8696f882a9	Merge pull request #12313 from thinkyhead/bf2_scara_home_offset ... Revive SCARA home offset (not fully implemented)	2018-11-03 07:05:24 -05:00
Scott Lahteine	56d2dcb184	Use first_page flag in place of page.page == 0	2018-11-03 06:59:21 -05:00
Scott Lahteine	d1ff22b983	Revive SCARA's home offset (unimplemented)	2018-11-03 06:24:41 -05:00
Scott Lahteine	2c9586be0c	Clear up HAS_WORKSPACE_OFFSET meaning	2018-11-03 04:06:37 -05:00
Scott Lahteine	6e3caf23b6	IS_DELTA => ENABLED(DELTA)	2018-11-03 03:57:11 -05:00
Scott Lahteine	19f49db96f	Tweak / reduce menu items	2018-11-03 01:18:59 -05:00
Scott Lahteine	e4cf175163	Synchronize on M204, M205 (#12302) ... * Add parser.seen for multiple parameters * Fix M666, use !seen for report * Synchronize on M204, M205	2018-11-03 01:16:37 -05:00
Ludy	5ba6607181	Fix keypad-related compile error (#12306)	2018-11-02 22:29:32 -05:00
Scott Lahteine	2fb2e286ee	Followup to #12256	2018-11-02 01:32:24 -05:00
Scott Lahteine	3eb9838dca	Simplify TMC sanity-checks	2018-11-02 01:15:49 -05:00
Scott Lahteine	f5b31e218d	Followup to #12082	2018-11-02 01:15:27 -05:00
Scott Lahteine	31c28d0dd2	Drop pgm_read_*_near and let headers choose (#12301) ... - Drop `pgm_read_*_near` and let headers choose. - Define `USE_EXECUTE_COMMANDS_IMMEDIATE` as a conditional. - Add `process_subcommands_now` for SRAM-based commands.	2018-11-02 00:42:16 -05:00
Scott Lahteine	fce150f094	inline static => static inline	2018-11-01 23:15:17 -05:00
Giuliano Zaro	323c088356	Restore LED light color after pid tuning (#12082)	2018-11-01 22:04:19 -05:00
Ludy	9f77df2590	Followup to menu refactor. TMC warnings, sanity. (#12288) ... - Followup fixes for menu refactor - Fix TMC sanity checks, unused var warnings	2018-11-01 16:13:33 -05:00
Nils Hasenbanck	cafabf2055	Implement DELAY_NS with CYCCNT on Cortex-M7 (#12283)	2018-11-01 16:11:51 -05:00
Scott Lahteine	f5498168ae	Ensure PENDING/ELAPSED use a 32-bit integer	2018-11-01 16:08:23 -05:00
MasterPIC	6e041b9c61	Use blink to show more info on LCD (#12256)	2018-11-01 15:56:12 -05:00
Scott Lahteine	eb5600acd2	Add parentheses to LCD_CLICKED	2018-11-01 15:06:14 -05:00
Scott Lahteine	42f8b6c530	Make M125 work with SDSUPPORT (#12289)	2018-11-01 15:03:45 -05:00
Scott Lahteine	f319087372	Followup to #12293	2018-11-01 14:41:03 -05:00
AnHardt	74bbb13008	Fix Mixer calculations for 32-bit processors (#12293)	2018-11-01 14:38:45 -05:00
Scott Lahteine	549d11225a	Add to description of Z_STEPPER_AUTO_ALIGN ... In response to #12272	2018-10-31 18:07:20 -05:00
Scott Lahteine	2cff0d1f39	Move menu_level_bed_corners to its own file	2018-10-31 17:44:42 -05:00
Scott Lahteine	44f2a82a56	Move axis_homed, axis_known_position to motion.*	2018-10-31 17:44:42 -05:00
Scott Lahteine	946cf8b453	EEPROM read code grouping	2018-10-31 16:43:46 -05:00
Ludy	f2adb4b9cc	Update German language (#12280)	2018-10-31 16:40:41 -05:00
Karl Andersson	484ca68228	Fix misplaced parentheses (#12284)	2018-10-31 15:34:37 -05:00
Scott Lahteine	1d366db764	Tweaks to CR-10S configuration	2018-10-30 23:36:32 -05:00
Scott Lahteine	b5d7f69b51	Followup to #12249	2018-10-30 22:51:45 -05:00
N95JPL	b780b69c62	Use font ascent and descent for line positioning (#12224)	2018-10-30 22:39:44 -05:00
Scott Lahteine	9cd3529108	Organize language data, fix Korean and Danish	2018-10-30 20:41:16 -05:00
Chris Pepper	66d44c72c3	Add fast binary file transfer to SD card option (#12249)	2018-10-30 19:44:12 -05:00
Marcio Teixeira	72d8adfd1e	Cleanup and refactor EXTENSIBLE_UI (#12227) ... - Add `axis_t`, `extruder_t`, `heater_t`, and `fan_t` to eliminate ambiguity, improve type safety. - Regularized getter/setter argument order and naming. - `setAxisPosition` no longer stacks moves in the buffer, allowing it to be called repeatedly on each touch ui tap. - Implement better manual moves for `EXTENSIBLE_UI` (#12205) - Calling `setAxisPosition_mm` no longer buffers the entire move to the new position, but instead causes small moves towards it to be made during the idle loop. This allows the user to adjust the destination even after the move has started and makes the UI feel much more responsive. - As suggested by @ejtagle, the new code keeps the planner buffer full to ensure smooth motion without stops and starts. - Change `En`, `Hn` and `FANn` to zero-based indices. - Labels consistent with the rest of Marlin code.	2018-10-30 19:42:26 -05:00
Karl Andersson	1946f729fd	STM32 FastIO using register access (#12276)	2018-10-30 19:25:44 -05:00
Scott Lahteine	56057bcecd	Fix lcd_impl_status_screen_1	2018-10-30 19:24:16 -05:00
Scott Lahteine	4ed579cafc	Americanized English spelling	2018-10-30 18:55:38 -05:00
Scott Lahteine	9e663a624b	Apply #pragma once to configuration files	2018-10-30 18:35:12 -05:00
Scott Lahteine	98c32d8df1	Fix a config endif label	2018-10-30 18:28:16 -05:00
Scott Lahteine	3583e2b449	Followup to Menu Refactor (#12275)	2018-10-30 16:34:45 -05:00
TheLongAndOnly	5536228359	G34 Auto-align multi-stepper Z axis (#11302)	2018-10-29 14:01:36 -05:00
Scott Lahteine	f9b80e7217	Make getfilename_sorted standard for listings	2018-10-29 13:54:21 -05:00
Scott Lahteine	5ead026967	Fix menu_temp_xx_filament_change menu items	2018-10-28 20:43:33 -05:00
Scott Lahteine	d632e44c8c	[Merge] Refactor LCD menus / screens (#12199)	2018-10-28 18:18:22 -05:00
Ludy	1f9806875c	Update German language (#12261)	2018-10-28 18:11:55 -05:00
mholeys	63ce8baa55	Fix Teensy 3.5/3.6 ADC access for ADC1 (#12258)	2018-10-28 15:51:49 -05:00
Scott Lahteine	3a935fd72b	Reduce repetition in menu edit items	2018-10-28 15:46:45 -05:00
Scott Lahteine	b063b1b722	Reorganize includes and declarations	2018-10-28 15:46:45 -05:00
Scott Lahteine	43cf913048	Move SD Card Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	0161d3f733	Move Custom User Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	3b0d2330b6	Move Delta Calibrate Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	6896847210	Move LED Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	9cd5471202	Move Job Recovery Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	9f11e0284c	Move Filament Change Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	d87ab3ed20	Move Advanced Settings Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	587a64d80c	Move Bed Leveling Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	96f313fb41	Move Info Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	423ab029b2	Move Temperature Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	489017995e	Move UBL Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	a489c9fa52	Move Motion Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	3a9ad9f2b1	Move Configuration Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	143d4ec043	Move Tune Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	829effc1fe	Move Main Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	37ff663b02	Convert LIGHTWEIGHT_UI to CPP	2018-10-28 15:46:45 -05:00
Scott Lahteine	a964f098b3	Make dogm status screen a CPP	2018-10-28 15:46:45 -05:00
Scott Lahteine	8055ed24ff	Move font data to a subfolder	2018-10-28 15:46:45 -05:00
Scott Lahteine	774a6e8199	Drop TALL_FONT_CORRECTION	2018-10-28 15:46:45 -05:00
Scott Lahteine	c825c419d4	Convert DOGM / HD44780 impl to CPP files	2018-10-28 15:46:45 -05:00
Scott Lahteine	182b1405d9	LCD conditionals in configurations	2018-10-28 15:46:45 -05:00
Scott Lahteine	2bf18950ab	Refactor LCD menus	2018-10-28 15:46:45 -05:00
Scott Lahteine	ac5f2762b7	Use E_AXIS_N where possible	2018-10-28 15:46:45 -05:00
MasterPIC	6fbc87301f	'G29 H' to set a centered square probe area (linear, bilinear) (#12242)	2018-10-27 20:30:21 -05:00
Karl Andersson	c1e8bd6add	Remove STM32 board-specific delays (#12243) ... ...and replace with delays for all HAL_STM32 boards.	2018-10-27 17:26:12 -05:00
Scott Lahteine	3c9daf322a	MSG_CNG_SDCARD => MSG_CHANGE_SDCARD	2018-10-27 13:56:29 -05:00
Scott Lahteine	4b7a0a5b39	Require TMCStepper 0.2.2 or newer ... In reference to #12175	2018-10-27 11:15:28 -05:00
Scott Lahteine	ab8425f1b5	Clean up PROBE_TRIGGERED_WHEN_STOWED_TEST (#12232)	2018-10-26 19:18:20 -05:00
Chris Rigter	3028a620af	Add RACK_AND_PINION_PROBE (#12218)	2018-10-26 18:24:24 -05:00
InsanityAutomation	ad60f0691c	Add Creality3D RAMPS pins definitions (#12229)	2018-10-26 16:09:04 -05:00
Scott Lahteine	5580773191	Use FastIO, sanity-check LPC SD options, apply formatting (#12231)	2018-10-26 15:23:02 -05:00
Scott Lahteine	d015f746cc	Fix some compile warnings (#12220)	2018-10-26 03:53:06 -05:00
Scott Lahteine	dacb5324e8	Fix display of Y on Graphical LCD	2018-10-26 01:43:47 -05:00
Scott Lahteine	bf9dd4f4cf	Add helpers for custom text in menu items (#12214) ... For some features it can be useful to write custom text in a menu item. This commit provides helpers to make this easier.	2018-10-25 15:17:53 -05:00
Scott Lahteine	e8031b1152	Add Custom Microstepping options	2018-10-25 11:26:32 -05:00
Scott Lahteine	fbfb48cce0	Indent a block	2018-10-25 10:52:27 -05:00
Marcio Teixeira	1a00d1bdaf	Add pullup to USB interrupt line ... - A pullup on the INT pin is required when the pin is level-active	2018-10-25 10:42:08 -05:00
TheSFReader	a07ac6312f	G0 feedrate may be fixed or variable (#12172)	2018-10-25 10:35:16 -05:00
Scott Lahteine	53c535a0c1	Remove trailing whitespace	2018-10-25 09:46:33 -05:00
Roman Moravčík	55dec02ca1	Allow X, Y, Z manual move when cold. (#12209)	2018-10-25 09:13:52 -05:00
Luc Van Daele	7243101135	z_offset fix for deltas (#12210)	2018-10-25 09:11:26 -05:00
Scott Lahteine	9613f00877	Fix getProgress_seconds_elapsed to return seconds	2018-10-24 18:05:15 -05:00
gjdodd	5d487ef40e	Fix null exception due to duration_t of zero (#12207)	2018-10-24 17:59:33 -05:00
Giuliano Zaro	a9061714f2	Update Italian language (#12196)	2018-10-24 16:40:48 -05:00
InsanityAutomation	aebbb2359d	Fix IDEX homing X0 wrong direction (#12200)	2018-10-24 16:40:06 -05:00
gjdodd	0a549fd1f2	Fix EXTENSIBLE_UI compile errors (#12206)	2018-10-24 16:36:11 -05:00
Roman Moravčík	a80ba8fc6e	Slovak translation update (#12202)	2018-10-24 16:02:38 -05:00
Roman Moravčík	e48cbff10d	Fixed redefinition warnings of MSG_HOTEND_TOO_COLD. (#12203)	2018-10-24 15:00:07 -05:00
Scott Lahteine	7a04eb3a8b	Fix some comment formatting	2018-10-23 22:35:44 -05:00
Scott Lahteine	2f873a119f	Revert some UBL strings	2018-10-23 15:39:59 -05:00
Ludy	a93e9e6e9b	Use preheat labels in place of PLA/ABS (#12194)	2018-10-23 15:38:17 -05:00
Karl Andersson	aa72884a6e	Enable use of SERIAL_PORT_2 on HAL_STM32 (#12197)	2018-10-23 15:24:58 -05:00
Scott Lahteine	46360f18b4	Bring thermistor_75.h up to speed	2018-10-23 14:52:16 -05:00
Scott Lahteine	e229b831fa	Customizable preheat labels	2018-10-23 00:57:50 -05:00
Scott Lahteine	a553ab82e0	Add e index to _lcd_move_distance_menu	2018-10-22 23:35:04 -05:00
Scott Lahteine	3a46212dd8	Better cold extrusion prevention in LCD menu (#12189)	2018-10-22 20:54:38 -05:00
Marcio Teixeira	fc31da1114	Implement custom delay/millis for EXTENSIBLE_UI (#12188)	2018-10-22 19:37:48 -05:00
forkoz	3a3ab3391f	Return set_directions() to stepper.cpp (#12182) ... Initial manual Z move can be negative if your stepper is inverted. Leads to bad situations for crashed or initially booted printers.	2018-10-22 19:30:51 -05:00
Scott Lahteine	e5ae7a07d1	Suppress compiler warning	2018-10-21 13:44:27 -05:00
Hannes Brandstätter-Müller	6ee2af5e2d	Simplify pins_TRIGORILLA_14.h (#12162)	2018-10-21 03:23:20 -05:00
Roman Moravčík	d801f85963	Correct EEPROM read/write disparities. (#12169)	2018-10-21 02:56:31 -05:00
Scott Lahteine	8d3a92fc4a	Followup to millis_t patch	2018-10-20 23:23:58 -05:00
Ludy	44369d536a	Use millis_t where needed (#12152)	2018-10-20 23:21:27 -05:00
Scott Lahteine	b641571098	Replace types.h with millis_t.h	2018-10-20 23:07:12 -05:00
Scott Lahteine	eeef4e630a	Fix compile error in leds.h	2018-10-20 23:07:12 -05:00
Scott Lahteine	9969c06cb5	Fix compiler warning	2018-10-20 17:16:59 -05:00
Farkas Péter	427c80119a	Hide some menu items when busy: fix typo (#12164)	2018-10-20 15:55:31 -05:00
InsanityAutomation	55ac2f4c23	Fix filament runout for idex duplication modes (#12168)	2018-10-20 13:39:33 -05:00
Karl Andersson	b640b3b0d6	Define ST7920 delays for board ARMED (#12161)	2018-10-20 13:12:54 -05:00
Marcio Teixeira	2e5e689a7f	Fix kill() and ExtensibleUI (#12160) ... * Fix to isPrintingFromMedia() - isPrintingFromMedia() will now return true even if SD print is paused. - isPrintingFromMediaPaused() allows UI to determine if the print is paused. * Don't use _delay_us in minkill (#12145) - In HAL_DUE, _delay_us is simply an alias for delay, which causes the board to hang and subsequently reboot due to the watchdog timer. * Shorten code with IFSD macro	2018-10-20 01:44:46 -05:00
Scott Lahteine	b381cad399	Clean up trailing whitespace	2018-10-19 15:27:17 -05:00
Scott Lahteine	9090065e9f	Move EXTRA_FAN_SPEED above FWRETRACT	2018-10-19 15:15:00 -05:00
Karl Andersson	4eb798dbdc	Add support for Arm'ed (STM32F4) board (#12147)	2018-10-19 14:50:52 -05:00
TheSFReader	1fb9b299d4	Add M524 to abort SD printing (#12155)	2018-10-19 14:25:07 -05:00
Scott Lahteine	d26d9d5b81	Tweak IS_SD_INSERTED	2018-10-19 14:00:36 -05:00
Scott Lahteine	c6a5c74208	Add parentheses to SD macros	2018-10-19 13:52:57 -05:00
Giuliano Zaro	aa9202260d	Fix endstop when no interrupt (#12158)	2018-10-19 13:45:39 -05:00
Scott Lahteine	8c02dd971b	Move disable_all_steppers to minkill	2018-10-19 13:42:04 -05:00
Scott Lahteine	3847c08f7e	Disable heaters/steppers before message	2018-10-19 13:30:46 -05:00
Marcio Teixeira	71e19baf69	Fix kill => disable_all_heaters => print_job_timer.stop (#12146) ... - Remove `print_job_timer.stop()` from `disable_all_heaters` - Call `print_job_timer.stop()` for relevant `disable_all_heaters()`. - Split up `kill()` for watchdog interrupt safety	2018-10-18 21:20:56 -05:00
Ludy	4cc1c2627e	Update German language (#12143)	2018-10-18 19:17:37 -05:00
Ludy	75a0d46edf	Fix compile warning re: LCD_INFO_SCREEN_STYLE	2018-10-18 19:16:24 -05:00
Scott Lahteine	a81763c237	Pins E sanity check tweak	2018-10-18 18:48:23 -05:00
Giuliano Zaro	bc22641002	[2.0.x] Updated Italian Language (#12148)	2018-10-18 18:08:39 -05:00
Michael Triffon	eded90bf87	Updated Azteeg X5 Mini Wifi pins for onboard SD (#12133)	2018-10-18 11:52:55 -05:00
nhchiu	27a84fd021	Remove unused option in Anycubic Kossel config (#12138)	2018-10-18 11:47:59 -05:00
Scott Lahteine	67a3c5a16a	Alternative info screen (Prusa-style) (#12132) ... * Fix Z value display * Add HAS_PRINT_PROGRESS * Alternative Info Screen option * Add LCD_INFO_SCREEN_STYLE to example configs	2018-10-18 11:34:52 -05:00
Marcio Teixeira	5b7dd553d3	Fix sd_mmc_spi_mem capacity; clean up USB code (#12134) ... - Fix an error in the return value of `sd_mmc_spi_read_capacity` which was causing the host OS to read beyond the last sector in the card. - Clean up the USB flashdrive code and add better debugging.	2018-10-18 11:34:07 -05:00
Scott Lahteine	df768e7d8f	Followup to #12129	2018-10-18 11:29:49 -05:00
Chris Pepper	3c13c9e3e9	[LPC176x] Fix USEABLE_HARDWARE_PWM macro, cleanup multiple LED support (#12129)	2018-10-18 11:26:50 -05:00
InsanityAutomation	a768df83cb	Remove stale variable (#12136)	2018-10-18 11:26:14 -05:00
Hannes Brandstätter-Müller	c36773bffb	Update the Ender-4 example config (#12131) ... - Enable filament change menu - Enable bed-PID - Enable s-curve acceleration - Enable some menu items - Update from Skorpi's new version - Fix extruder steps, deactivate nozzle clean feature	2018-10-17 15:49:52 -05:00
Ludy	9c71bff5e8	Update German language (#12115)	2018-10-17 11:17:06 -05:00
Nils Hasenbanck	9deb23aa47	Add missing SerialUSB definition for STM32 HAL (#12124)	2018-10-17 11:14:10 -05:00
Nils Hasenbanck	0519ef0802	Update pins for final RemRam v1.3 board (#12125)	2018-10-17 11:13:38 -05:00
InsanityAutomation	3ec3872730	Single Z raise value for all tool-changing / parking (#12090) ... * Universal tool-change Z lift * Add TOOLCHANGE_ZRAISE to example configs * Park/unpark changes to example configs * Implement DEBUG_DXC_MODE	2018-10-17 11:11:41 -05:00
Scott Lahteine	6bdbe3299e	Fix a comment	2018-10-17 10:33:54 -05:00
Scott Lahteine	bc75eb2c64	Cleanup for HAL_spi_Due.cpp	2018-10-17 10:33:54 -05:00
AnHardt	d82bcdeea1	Make PULSE_STOP(E) conditional (#12121)	2018-10-17 09:52:57 -05:00
Chris Pepper	c90e26dfa6	fix normal extruder stepping (#12118)	2018-10-17 02:47:31 -05:00
Hannes Brandstätter-Müller	96bbda5d48	remove confusing comment (#12120)	2018-10-17 02:47:03 -05:00
Marcio Teixeira	f98f4ac7ea	Fix and improve EXTENSIBLE_UI (#12117) ... - Add methods to access print counter data - Clean up some inconsistent method names - Clear lcd status after filament change - Implement `lcd_reset_status` so it works like UltraLCD	2018-10-16 16:58:29 -05:00
Scott Lahteine	8bf596bd4c	RETRACT_ZLIFT => RETRACT_ZRAISE	2018-10-16 16:46:40 -05:00
Marcio Teixeira	056561df93	[2.0.x] Enhancements to FILAMENT_RUNOUT_SENSOR (#12069) ... - Added FILAMENT_RUNOUT_DISTANCE_MM option - Added FILAMENT_MOTION_SENSOR option	2018-10-16 07:28:52 -05:00
Scott Lahteine	cce4931342	Clean up recent contribs	2018-10-16 06:45:44 -05:00
Karl Andersson	8b5e51c9aa	STM32F4xx modifications for HAL_STM32 (#12080)	2018-10-16 06:42:41 -05:00