Luc
9d6b2ebf50
Improve ESP32 HAL (EEPROM, watchdog) ( #16228 )
2019-12-15 11:39:39 -06:00
thisiskeithb
dc8d8cb39c
Fix MKS SGen-L SD detect pin ( #16224 )
2019-12-15 11:25:07 -06:00
Luu Lac
509e1ab053
TOUCH_MI_DEPLOY_XPOS fallback to X_MIN_POS ( #16226 )
2019-12-15 11:21:39 -06:00
Luu Lac
e9dadacf7b
Fix bad #ifdef ( #16227 )
2019-12-15 11:16:36 -06:00
Scott Lahteine
6a514a1e8e
Move status screen defines
2019-12-12 22:20:03 -06:00
Scott Lahteine
303ddb862a
Tweak some config names
2019-12-12 22:18:04 -06:00
Scott Lahteine
f3d64b7115
Cardreader read/write open methods
2019-12-12 18:46:49 -06:00
Bo Herrmannsen
98382fcea5
Include Z in SCARA steps feedrate ( #16193 )
2019-12-12 17:13:49 -06:00
iain MacDonnell
629c039eed
Update M503 MBL G29 report ( #16199 )
2019-12-12 16:54:54 -06:00
randellhodges
2a7f1091ce
Fix compile error (macro substitution typo) ( #16194 )
2019-12-12 16:51:35 -06:00
Anders Sahlman
3d4aa015a8
Add MKS Robin Mini EEPROM defines ( #16203 )
2019-12-12 16:35:46 -06:00
InsanityAutomation
7b512742f4
Tweak ExtUI Probeless Babystepping ( #16177 )
2019-12-12 15:51:56 -06:00
ManuelMcLure
b065a60dd0
Onboard (always-on) pullups support ( #16144 )
2019-12-12 15:49:14 -06:00
thisiskeithb
98814e1c47
MKS 12864 OLED pins for SGEN-L ( #16188 )
2019-12-11 02:18:21 -06:00
André Kjellstrup
c2342c3528
Use error message !! hints ( #16145 )
2019-12-11 01:46:11 -06:00
MangaValk
96cf556139
Fix multiple servos with STM32 ( #16151 )
2019-12-11 01:44:05 -06:00
MS1987
31fdaea269
Add MKS Robin Pro, MKS Robin Lite3 ( #16163 )
2019-12-11 00:23:47 -06:00
Scott Lahteine
1c48817a47
[cron] Bump distribution date
2019-12-11 00:00:04 -06:00
Scott Lahteine
0d52eaa875
Superscript 3 for mm3
2019-12-10 23:45:39 -06:00
Tanguy Pruvot
5ebef425ce
Update french (objects, retract...)
2019-12-10 23:45:39 -06:00
Giuliano Zaro
5dfa152ba2
Update Italian language ( #16147 )
2019-12-10 23:38:14 -06:00
dagorel
1c4f672eae
Formalize DAC percent strings ( #16176 )
2019-12-10 23:37:25 -06:00
Anders Sahlman
1bcd47e65f
Correct MKS Robin Mini pins ( #16178 )
2019-12-10 23:32:11 -06:00
Antti Andreimann
1465fc0632
Fix controller and SD on Robin Nano ( #16187 )
2019-12-10 23:29:33 -06:00
Scott Lahteine
07a61057ba
[cron] Bump distribution date
2019-12-10 00:11:19 -06:00
Scott Lahteine
bb5717c5b3
[cron] Bump distribution date
2019-12-07 00:00:05 -06:00
Luu Lac
f3155af444
Update AZSMZ LCD link ( #16106 )
2019-12-06 01:35:06 -06:00
Tanguy Pruvot
ab61c09bff
Improve touch buttons behavior ( #16109 )
2019-12-06 00:47:50 -06:00
Antti Andreimann
b65ab21733
Fix compile error with disabled PIDTEMP ( #16108 )
2019-12-05 20:51:41 -06:00
randellhodges
7f8ca85e69
STM32F1 Flash-based EEPROM fixes ( #16118 )
2019-12-05 20:48:11 -06:00
Scott Lahteine
f64649933f
[cron] Bump distribution date
2019-12-04 01:57:33 -06:00
ManuelMcLure
68da497f35
Remove debug_out.h '#pragma once' (again) ( #16098 )
2019-12-04 01:29:02 -06:00
Vertabreaker
0832a60db3
EXP3D Imprimante Multifonction ( #16079 )
2019-12-03 06:52:38 -06:00
ellensp
cb4cd76086
Fix TMC_SW_MOSI for BTT_SKR_MINI_V1.1 ( #16081 )
2019-12-03 06:44:36 -06:00
Scott Lahteine
6134bff81b
Expand environments in platformio.ini
2019-12-02 21:19:23 -06:00
Scott Lahteine
b2c670fd94
[cron] Bump distribution date
2019-12-02 00:00:04 -06:00
Scott Lahteine
cb7817093f
More serial macro cleanup
2019-12-01 22:23:36 -06:00
Scott Lahteine
9114a14eca
Fix commas in EEPROM code
2019-12-01 21:59:58 -06:00
Vertabreaker
3874f4a097
Geeetech A30 / GTM32 support ( #16071 )
2019-12-01 21:25:45 -06:00
Luu Lac
01e4b0c067
Add Laser / Spindle bitmap for LCD ( #16068 )
2019-12-01 21:20:15 -06:00
Scott Lahteine
3dc49fd1c6
Split up hotend / bed drawing
2019-12-01 20:52:59 -06:00
InsanityAutomation
7126a5e5a7
Add Host Prompt Notification Method ( #15942 )
2019-12-01 17:39:28 -06:00
ManuelMcLure
c061656659
Use PSU powerup delay for all powerups ( #16065 )
2019-12-01 17:36:49 -06:00
Scott Lahteine
25a7ceabdb
Fix missing step_current_down semicolons
2019-12-01 17:30:22 -06:00
Scott Lahteine
9b6d2da9bf
Fix debug out macros
2019-12-01 17:28:18 -06:00
Scott Lahteine
4718b8ad02
Add _P variants to debug_out
2019-12-01 13:32:32 -06:00
Felicia Hummel
6c2438deae
Fix PSU_POWERUP_DELAY compile error ( #16064 )
2019-12-01 12:55:28 -06:00
brian park
b258cc85bf
Mostly Printed SCARA (MPSCARA) support ( #15573 )
2019-11-30 08:57:34 -06:00
hammerhead2k2
19f840a9b5
BTT SKR 1.3 pins for Anet Full Graphics LCD ( #16047 )
2019-11-30 08:21:54 -06:00
Scott Lahteine
83a4e8559c
Followup to "optimize common strings"
2019-11-30 08:18:23 -06:00
InsanityAutomation
b24b0f385f
Add ExtUI Flow Rate method ( #16048 )
2019-11-30 07:23:53 -06:00
Felicia Hummel
690ed531b6
Configurable PSU power-on delay ( #16050 )
2019-11-30 07:17:24 -06:00
Scott Lahteine
27943f9e31
Multiple axis TMC OTPW step down ( #16044 )
2019-11-30 06:59:44 -06:00
Scott Lahteine
1ee648ecd2
Followup to "optimize common strings"
2019-11-30 06:55:32 -06:00
Scott Lahteine
0138c0b55b
[cron] Bump distribution date
2019-11-30 00:00:04 -06:00
Scott Lahteine
f83bc0aa13
Optimize common strings
...
Saves 128 bytes in testing with `mftest mega 1 -y`
2019-11-29 22:54:42 -06:00
Scott Lahteine
2d74c2042a
Clean up whitespace, GTM32 pins
2019-11-29 20:05:32 -06:00
Chris Pepper
e585c37d7d
Fix #16038
2019-11-29 16:44:11 +00:00
Vertabreaker
1803f672f8
Pins for GTM32 board variants ( #16020 )
2019-11-29 07:12:49 -06:00
BigTreeTech
441ee3e53f
Add 'M114 E' to get E position (M114_DETAIL) ( #16026 )
2019-11-29 06:53:32 -06:00
Chris Pepper
a63491e6eb
Sanity check ADC pins and FAST_PWM_FAN with Servos ( #16038 )
2019-11-29 06:52:28 -06:00
Bob
0f2ee414db
Update thermistornames.h ( #16027 )
2019-11-29 02:06:11 -06:00
Scott Lahteine
0f14e0e978
[cron] Bump distribution date
2019-11-29 00:00:06 -06:00
Bob
5a98c83eef
Use MAX6675 SPI pins for MAX31865 over SPI pins ( #16024 )
2019-11-27 01:45:03 -06:00
Jason Smith
752a1e76ab
Float ABL mesh boundaries, no probe position rounding ( #16018 )
2019-11-27 01:29:25 -06:00
Jason Smith
ce9a4afe95
Better ST7920 timings for FYSETC S6 ( #16022 )
2019-11-27 01:26:21 -06:00
Scott Lahteine
289c5dcccb
Fix boot screen sanity check
2019-11-27 01:10:23 -06:00
Scott Lahteine
98f83dc756
Add comments to G29
2019-11-27 01:05:22 -06:00
Dirk O. Kaar
0550f30790
Renkforce configuration updates ( #16017 )
2019-11-26 20:22:17 -06:00
Scott Lahteine
077eeaa0f4
Fix mixing extruder feedrate ( #15905 )
2019-11-26 18:03:59 -06:00
Vertabreaker
12417d087b
E2 pins for GT 2560 v3 ( #16016 )
2019-11-26 17:43:27 -06:00
timeburn
a5a143f944
Include host_actions.h in G34 ( #16014 )
2019-11-26 16:38:41 -06:00
George Fu
cf1e19d167
Fysetc S6 support ( #15850 )
2019-11-26 16:15:03 -06:00
Dirk O. Kaar
1cea1687f3
Renkforce RF100 (V1), V2, XL, and XL Plus ( #15695 )
2019-11-26 14:06:23 -06:00
thisiskeithb
f786cc5145
Revert default BTT STM32F103 environment ( #16006 )
2019-11-26 04:28:13 -06:00
madmattco
049e8d5963
Add VAKE / VAKE403D support ( #15631 )
2019-11-26 04:00:59 -06:00
Heilig Benedek
993802c404
Fix Ender 2 display SCK, BTN_ENC pins ( #15997 )
2019-11-26 03:48:21 -06:00
haschtl
ff6518c0a8
Add PID_FAN_SCALING option ( #15585 )
2019-11-26 03:34:43 -06:00
lukasmatena
8ccfdaca02
Add M220 B/R with PRUSA_MMU2 ( #15739 )
2019-11-26 03:34:18 -06:00
Chris Pepper
c1aac3a0c9
Fix delta_mm.e with zero extruders ( #15996 )
2019-11-26 02:58:17 -06:00
Marcio T
43d0391d82
Fix Touch UI message strings ( #16004 )
2019-11-26 02:56:25 -06:00
Robby Candra
fc9f8d27eb
Fix Progress / Remaining display on DOGM ( #16005 )
2019-11-26 02:55:22 -06:00
Jason Smith
d0282e5ba8
Allow slop in position_is_reachable for delta ( #16003 )
2019-11-26 02:53:28 -06:00
Scott Lahteine
1d150e41b6
Reduce MMU2 code, add test
2019-11-26 02:15:31 -06:00
Robby Candra
55595d444d
Use LCD_WIDTH for indexed string ( #15979 )
2019-11-24 19:06:23 -06:00
InsanityAutomation
2142beb2e5
Fix UI compile error in UBL ( #15981 )
2019-11-24 17:04:19 -06:00
Jason Smith
c497a491f4
Fix a PID_EXTRUSION_SCALING menu item ( #15988 )
2019-11-24 17:01:14 -06:00
Scott Lahteine
b11551c767
Touch UI updates for Cocoa Press ( #15986 )
2019-11-24 06:08:05 -06:00
Scott Lahteine
441e822fb3
LULZBOT_TOUCH_UI => TOUCH_UI_FTDI_EVE
2019-11-23 17:04:17 -06:00
Scott Lahteine
47c19aa2b3
Clean up probe accessors
2019-11-23 17:02:04 -06:00
pfillion42
4a5dee6356
(SKR 1.3) Assign DIAG pins for homing dir ( #15972 )
2019-11-23 16:20:13 -06:00
Denis Semenov
0fcd1f4a49
Fix HAS_CLASSIC_E_JERK and related issues ( #15968 )
2019-11-23 15:56:07 -06:00
Scott Lahteine
8f09d2e790
Add STM32F103RE_bigtree to Auto Build
2019-11-22 16:47:31 -06:00
Gustavo Alvarez
b2a275891c
Support RET6 in BTT SKR Mini ( #15957 )
2019-11-21 05:09:01 -06:00
Scott Lahteine
bdd366b97c
Update sensor -5 label
2019-11-21 04:57:57 -06:00
Jason Smith
b904ba0f29
Improve Delta probing / calibration ( #15887 )
2019-11-21 03:26:00 -06:00
Jason Smith
4ede13e36a
Fix G29 for updated meshCount type ( #15960 )
2019-11-21 03:19:56 -06:00
Bob
751cd1f533
MAX31865 temperature sensor ( #15930 )
2019-11-21 03:15:10 -06:00
Scott Lahteine
47e4e5f1db
Update thermocouple comments
2019-11-20 23:51:51 -06:00
Roman Moravčík
5681017d0c
Update Slovak language ( #15953 )
2019-11-20 17:41:14 -06:00
BigTreeTech
ab8b24fdba
Power Loss Recovery with a UPS ( #15943 )
2019-11-20 17:40:21 -06:00
Scott Lahteine
ab9f0f2c4f
Followup to meshCount patch
2019-11-20 04:57:04 -06:00
InsanityAutomation
e81b946f06
Better singlenozzle stored fan speed menus ( #15921 )
2019-11-20 00:14:56 -06:00
Daniel Negut
a3229b30ec
Add Zonestar/Anet LCD for SKR mini E3 ( #15931 )
2019-11-20 00:06:26 -06:00
InsanityAutomation
798f34abcd
Float XY probe offset followup (probe edge) ( #15928 )
2019-11-19 23:29:52 -06:00
Giuliano Zaro
31e329f143
Update Italian language ( #15925 )
2019-11-19 23:27:53 -06:00
Jason Smith
9906e96ffb
Allow UBL G29 J1 with PAUSE_BEFORE_DEPLOY_STOW ( #15934 )
2019-11-19 23:26:38 -06:00
Evgeny-SPB
7116a8645c
G34 logic / typo fix ( #15938 )
2019-11-19 23:25:07 -06:00
Giuliano Zaro
aa89bb71f9
Fix MMU2 compile error ( #15923 )
2019-11-19 23:22:02 -06:00
TheAssassin
814d908a8a
Ender-2 LCD on BTT SKR E3 ( #15924 )
2019-11-19 23:21:27 -06:00
InsanityAutomation
4d4e692c81
Match onMeshUpdate() index sign ( #15920 )
2019-11-19 23:16:43 -06:00
Luu Lac
4d9a5fef3b
Update Vietnamese language ( #15940 )
2019-11-19 21:08:47 -06:00
Scott Lahteine
865055e07a
[cron] Bump distribution date
2019-11-18 00:00:08 -06:00
Scott Lahteine
2bd6dc02d6
[cron] Bump distribution date
2019-11-17 00:00:06 -06:00
Robby Candra
40bbe58371
Use lcd_uint_t in lcd_put_u8str_ind_P ( #15909 )
2019-11-16 16:37:21 -06:00
Roxy-3D
f19fa64e98
Eliminate multiple settings to extruder_duplication_enabled in G28
...
If the IDEX mode was previously set (via GCode or the LCD Panel) to a duplication mode... It was lost after a G28 due to this redundant setting of 'extruder_duplication_enabled'.
It is very important to the various use cases of IDEX machines that extruder_duplication_enabled is preserved across a G28. The reason is this allows a person to use the LCD Panel to put the machine into a duplication mode, and then send a 'normal' part file to the printer and get two parts out of the process.
2019-11-15 15:42:01 -06:00
thisiskeithb
0f57818f2d
Support 512K "RCT6" in BTT SKR Mini ( #15890 )
2019-11-15 02:51:26 -06:00
Scott Lahteine
aa93e1f21a
Update TMC_ADV examples
2019-11-15 02:15:10 -06:00
Scott Lahteine
27cb4db80e
Reduced string storage using tokens ( #15593 )
2019-11-14 20:30:30 -06:00
Lino Barreca
bd321d4b7c
Don't compile STM32 SoftwareSerial unless STM32 ( #15894 )
2019-11-14 05:21:23 -06:00
Scott Lahteine
ac2d7ab14c
Fix timers.h include
2019-11-14 04:47:53 -06:00
Scott Lahteine
a022defe06
[cron] Bump distribution date
2019-11-14 00:00:12 -06:00
Scott Lahteine
3f4636e916
"nozzle_to_probe_offset" is obsolete
2019-11-13 03:07:54 -06:00
Scott Lahteine
602ca5dea6
No USE_M73_REMAINING_TIME without LCD_SET_PROGRESS_MANUALLY
2019-11-13 02:07:17 -06:00
Robby Candra
fcfde7c2f5
Only assign CS/RX/TX on extra axes with SPI/UART ( #15886 )
2019-11-13 02:03:34 -06:00
Scott Lahteine
a4709ba765
Store unscaled PID values in EEPROM ( #15884 )
2019-11-13 01:47:46 -06:00
Scott Lahteine
7e9c846ec3
Modify comment for unlimited E steppers
2019-11-13 01:45:50 -06:00
Jason Smith
9fd35c84ce
SoftwareSerialM for SKR STM32F1 boards ( #15875 )
2019-11-12 22:16:54 -06:00
Jamie
32028902c3
Use max feedrate for joystick motion ( #15870 )
2019-11-12 21:01:04 -06:00
Giuliano Zaro
bb93ea1be4
[SAMD51] Activate ADCs oversampled 12bits ( #15874 )
2019-11-12 20:59:17 -06:00
Roman Moravčík
e110f5abce
M73 R : Set Remaining Time ( #15549 )
2019-11-12 19:36:54 -06:00
Lino Barreca
ac71cdc265
New HardwareTimer for STM32 5.7.0 ( #15655 )
2019-11-12 19:23:02 -06:00
Chris Pepper
4762dfe797
Fix lpc u8g i2c ( #15876 )
2019-11-12 01:59:36 +00:00
Chris Pepper
af61f37b65
Update lpc176x requirements ( #15869 )
2019-11-11 03:25:56 +00:00
ManuelMcLure
b9703fdf36
Ensure TMC + LIN_ADVANCE pulse length ( #15807 )
2019-11-10 19:04:28 -06:00
Scott Lahteine
5e5045c4ee
Touch UI finishing touches
2019-11-10 18:52:53 -06:00
Marcio Teixeira
5639b8ca20
Touch UI fixes for Cocoa Press ( #15847 )
2019-11-10 18:49:41 -06:00
danym21
28e1614c2e
Add Sensorless Homing current ( #15690 )
2019-11-10 18:45:06 -06:00
Chris Pepper
86d0bc1af5
Update lpc176x framework version requirement ( #15868 )
2019-11-10 23:30:28 +00:00
LinFor
48b7a1e66e
Allow non-zero "fan off" PWM value ( #15709 )
2019-11-10 16:33:56 -06:00
Jason Smith
770adcfa15
Raise Z before homing X/Y on unknown Z ( #15859 )
2019-11-10 16:21:20 -06:00
Scott Lahteine
624336f453
Fix up Megatronics 3.2 test
2019-11-10 16:19:57 -06:00
ellensp
7b29c60c46
Fix compile with chamber enabled ( #15862 )
2019-11-10 16:15:08 -06:00
Scott Lahteine
534f2d69c1
[cron] Bump distribution date
2019-11-10 00:00:04 -06:00
Jademalo
37874a6472
Fix E0_SERIAL_RX_PIN typo ( #15841 )
2019-11-09 22:51:20 -06:00
Marcelo Cerri
b9d351899a
Update SKR mini E3 1.2 Filament Runout pin ( #15843 )
2019-11-09 22:49:33 -06:00
Scott Lahteine
7010f92c4b
Board-based LCD delays
2019-11-09 22:33:38 -06:00
Scott Lahteine
9ca25118d0
Whitespace cleanup
2019-11-09 21:17:52 -06:00
Jason Smith
b3f81eead5
Fix/improve TURBO_BACK_MENU_ITEM ( #15856 )
2019-11-09 19:27:30 -06:00
Scott Lahteine
776632c503
Add and apply REPEAT macro ( #15829 )
2019-11-09 17:59:04 -06:00
Scott Lahteine
8061836e74
Fix Lulzbot tag 30: "Heaters Off"
2019-11-08 03:57:34 -06:00
Scott Lahteine
249f600ceb
[cron] Bump distribution date
2019-11-08 00:00:03 -06:00
Marvin Sinister
8d157a4520
Fix MKS MINI12864 on SKR 1.3 ( #15836 )
2019-11-07 19:39:08 -06:00
Luu Lac
ed6bbe012b
Fix incomplete 'Homing XYZ' screen draw ( #15830 )
2019-11-07 19:14:02 -06:00
AnHardt
4db68d704f
Update Display Throttling ( #15837 )
2019-11-07 19:04:19 -06:00
Scott Lahteine
bb5b1e19b0
Function-style stepper macros
2019-11-07 17:14:36 -06:00
thisiskeithb
47805e18f8
Makefile catch-up ( #15823 )
2019-11-07 02:14:40 -06:00
Scott Lahteine
0be9fdb455
Move single-use to lambdas
2019-11-07 00:28:33 -06:00
Scott Lahteine
84ce3a6bea
LCD corner screen handler lambda
2019-11-07 00:24:16 -06:00
Scott Lahteine
711703dcd1
[cron] Bump distribution date
2019-11-07 00:00:06 -06:00
LinFor
a84e3d1b80
Use native ADC resolution where possible ( #15719 )
2019-11-06 17:49:17 -06:00
Miroslav Šustek
9201197878
Fix SKR E3 board BLTOUCH + SPEAKER timer conflict ( #15781 )
2019-11-06 17:34:29 -06:00
Jason Smith
814a2eaf8f
Allow TMC baud rate override ( #15773 )
2019-11-06 17:08:12 -06:00
teemuatlut
d9b0b964be
Fix TMC2208 HW Serial constructor ( #15782 )
2019-11-06 16:57:48 -06:00
Axel
786617e375
Fix RAMPS + VIKI i2c ( #15811 )
2019-11-06 16:52:28 -06:00
Scott Lahteine
e6dfc991ae
Patch tabs, heater led tests
2019-11-06 16:28:36 -06:00
Scott Lahteine
a89f4703df
Tweak permissions
2019-11-06 16:10:14 -06:00
Roman Moravčík
41b5d720e2
Fix filament Change heading on LCD ( #15783 )
2019-11-06 15:58:06 -06:00
Luu Lac
4ee3502c8f
Fix "confused intellisense" ( #15817 )
2019-11-06 15:54:09 -06:00
Scott Lahteine
f5b5b9e8ec
Bring filament menu up to speed
2019-11-05 17:16:12 -06:00
ellensp
f088c6a850
Add MKS_GEN_L_V2 controller support ( #15793 )
2019-11-04 16:31:27 -06:00
aleknest
cf87d3c700
More compatible uint8_t for Experimental i2c Bus buffer ( #15788 )
2019-11-04 16:28:16 -06:00
Scott Lahteine
e9805a0bcb
Go to previous menu on object cancel
2019-11-04 16:13:10 -06:00
Scott Lahteine
51fd226a4d
Unconfuse intellisense
2019-11-04 15:40:56 -06:00
Scott Lahteine
d80ef43c19
Followup to es int patch
2019-11-04 15:40:45 -06:00
Giuliano Zaro
35cd545106
Use prior endstop pin-to-interrupt macros ( #15771 )
2019-11-04 15:24:41 -06:00
Scott Lahteine
328ddda654
Clean up whitespace
2019-11-04 13:23:26 -06:00
Scott Lahteine
55991962be
Patch extra axis MS pins for debugging
2019-11-04 12:28:10 -06:00
Chris Pepper
b9116d4050
LPC176x Framework update ( #15722 )
...
Changes required for compatibility with framework-arduino-lpc176x 0.2.0
2019-11-03 02:34:09 +00:00
Scott Lahteine
15f94e5ee5
Add NUL_STR global
2019-11-02 07:31:07 -05:00
Scott Lahteine
ea3217cd46
Move 'draw' methods into Menu Item classes ( #15760 )
2019-11-02 07:28:20 -05:00
ManuelMcLure
76b861d759
Fix kill screen with null string ( #15747 )
2019-11-02 07:13:42 -05:00
Robby Candra
7360e9343a
Minor DOGM status screen fix ( #15746 )
2019-11-02 07:04:31 -05:00
Robby Candra
bdb452ed81
Fix missing % on DOGM Status Screen ( #15748 )
2019-11-02 07:01:50 -05:00
Giuliano Zaro
65ef774e8d
Fix mega Port J endstop interrupts ( #15758 )
2019-11-02 06:59:38 -05:00
Scott Lahteine
a920b10483
Fix true/false redefined warnings
2019-11-02 06:04:28 -05:00
Scott Lahteine
ed8f1ca9cf
Revert Cortex delay for now
2019-11-02 04:12:18 -05:00
Scott Lahteine
ca6d00b862
Save some string flash
2019-11-02 00:48:05 -05:00
Scott Lahteine
23d21dd81c
Tweak lambdas
2019-11-02 00:05:23 -05:00
Scott Lahteine
a7d7f36871
[cron] Bump distribution date
2019-11-02 00:00:05 -05:00
Scott Lahteine
93db4f4535
Tweak backtrace.cpp include
2019-11-01 22:08:33 -05:00
Scott Lahteine
f0d952d33a
Cortex M3-M7 can use DWT->CYCCNT ( #15762 )
...
Suggested by Alex Kenis at https://youtu.be/ZfyPcdhQnAA?t=502
2019-11-01 22:07:51 -05:00
Scott Lahteine
ad28da7eb4
Patch ABL G29 loop
...
Followup to e3ddf6e81a
2019-11-01 15:39:05 -05:00
Scott Lahteine
288af0ddf6
Whitespace
2019-11-01 15:39:05 -05:00
Scott Lahteine
e7d9db284e
Followup to M240 patch
2019-10-31 17:27:19 -05:00
Raúl Lázaro Sánchez
7c60853219
Fix blocking delay in Photo G-code M240 ( #15728 )
2019-10-31 17:14:11 -05:00
The-Force
c6f694a247
Power Loss Recovery for volumetric extrusion ( #15734 )
2019-10-31 14:09:37 -05:00
Scott Lahteine
4e6e02bc3e
Include pause.h for M701-702
2019-10-31 13:18:50 -05:00
Scott Lahteine
e3ddf6e81a
Fix meshCount signed-ness
2019-10-31 13:18:50 -05:00
Scott Lahteine
899e0fcdbb
[cron] Bump distribution date
2019-10-31 00:00:07 -05:00
Scott Lahteine
35b1149d96
Patch es int tests for Arduino 1.8.10
2019-10-30 15:52:02 -05:00
Scott Lahteine
c80eda073f
M119 => report_states
2019-10-30 15:24:10 -05:00
LinFor
7d24f152d8
Fix a typo breaking the build ( #15726 )
2019-10-30 15:10:08 -05:00
Scott Lahteine
61225e685d
Abort SD followup
2019-10-29 17:04:49 -05:00
Scott Lahteine
d5c1c72a76
Tweak CW/CCW bitmaps
2019-10-29 16:53:07 -05:00
Scott Lahteine
aaf018e5a0
Language changes
2019-10-29 16:20:35 -05:00
Scott Lahteine
583fc4ee2a
Move abortSDPrinting with others
2019-10-29 16:00:28 -05:00
Scott Lahteine
c5713b5e98
Clean Endstops::event_handler
2019-10-29 15:58:26 -05:00
Scott Lahteine
be498d6280
[cron] Bump distribution date
2019-10-29 00:00:05 -05:00
Aurawin
b09b469dd5
Add BIQU TANGO V1 support ( #15682 )
2019-10-28 18:21:59 -05:00
studiodyne
319e2b5760
Fan menus fix. FR cosmetic change. ( #15714 )
2019-10-28 16:49:31 -05:00
studiodyne
f139642e0f
XY/Z Babystep Multiplicators ( #15691 )
2019-10-28 16:44:17 -05:00
Scott Lahteine
ade76e53de
Fix A10M/A20M mixer display
...
Co-Authored-By: 3Dangel <3dangel@users.noreply.github.com>
2019-10-28 16:26:54 -05:00
InsanityAutomation
cc4d3a215e
Fix ExtUI UBL method calls ( #15704 )
2019-10-28 15:50:27 -05:00
InsanityAutomation
d4f5821cd6
Fix 3-point sanity check ( #15696 )
2019-10-28 15:46:59 -05:00
Scott Lahteine
9aff30da0c
Confirm object cancellation ( #15660 )
2019-10-27 19:50:21 -05:00
Scott Lahteine
78899fc241
Followup to E Total
2019-10-27 18:40:33 -05:00
Scott Lahteine
7a342ecb93
Show Total E during print ( #15703 )
2019-10-27 17:49:27 -05:00
Scott Lahteine
0f8c3ed29a
Prevent extra "too long/cold" errors
2019-10-27 17:40:07 -05:00
Scott Lahteine
9720d21301
Clean up trailing whitespace
2019-10-27 15:32:29 -05:00
Scott Lahteine
9e8021d6a4
Fix pins debug of CS/MS pins
2019-10-26 18:46:39 -05:00
Scott Lahteine
ab0fe1a7dd
Tweak G29 faux point
2019-10-26 14:41:54 -05:00
Giuliano Zaro
6fd13879ae
Update Italian language ( #15676 )
2019-10-26 12:54:59 -05:00
Scott Lahteine
600429a067
Cancel Objects followup
2019-10-25 20:08:45 -05:00
Roman Moravčík
e690471739
Print startup message after print statistics are loaded ( #15664 )
2019-10-25 19:46:56 -05:00
Scott Lahteine
732bf89878
Get 'cancelable' for gcode.cpp
2019-10-25 19:38:23 -05:00
Tanguy Pruvot
c58cc113dd
MKS Robin: restore the TFT v2.0 support (ST7789V) ( #15675 )
2019-10-25 19:30:43 -05:00
Scott Lahteine
014b739bac
Fix M486 int parameters
2019-10-25 19:19:33 -05:00
Scott Lahteine
f8ad15fde8
Rename BOARD_STM32F4 to fix use with MB()
2019-10-25 18:12:29 -05:00
Scott Lahteine
408751d5e0
Fix CANCEL_OBJECTS missing include
2019-10-25 15:45:55 -05:00
Evgeny Zyatkov
12a244f24f
Fix #endif typo ( #15661 )
2019-10-25 12:27:23 -05:00
Scott Lahteine
f12285015a
[cron] Bump distribution date
2019-10-25 12:18:21 -05:00
Scott Lahteine
93f0012959
Cancel Objects - As seen at ERRF2019 ( #15590 )
2019-10-24 15:35:40 -05:00
Marcio T
f6a799c7b3
Allow compile under Windows Subsystem for Linux ( #15606 )
2019-10-24 14:57:20 -05:00
InsanityAutomation
82fb046013
Allow suicide pin inverting ( #15586 )
2019-10-24 14:07:28 -05:00
Scott Lahteine
2a7e1d459f
Option to rotate Percent, (E)lapsed, and (R)emaining time ( #15578 )
2019-10-24 14:00:59 -05:00
Scott Lahteine
464d98d178
Short time prefixes, no percent prefix
2019-10-24 14:00:32 -05:00
Scott Lahteine
ccf61eca84
Fix diplay elaspsed
2019-10-24 13:48:27 -05:00
Scott Lahteine
ff4301a422
Update status_screen_DOGM.cpp
2019-10-24 13:42:02 -05:00
Scott Lahteine
326d5b84e7
Update status_screen_DOGM.cpp
2019-10-24 13:39:32 -05:00
Scott Lahteine
5edd5d1e1f
Clean up
2019-10-24 13:38:39 -05:00
Jacob Jordan
9895e6d766
Only use slow homing speed where applicable ( #15640 )
2019-10-24 13:14:45 -05:00
InsanityAutomation
b3d7d33faf
Fix CUSTOM_VERSION_FILE has_include ( #15635 )
2019-10-24 13:07:29 -05:00
Robby Candra
cf8541a7a7
Fix G92.9 (thus PLR Z position) ( #15625 )
2019-10-24 13:05:50 -05:00
Scott Lahteine
cd3ec5a77b
Add error-check to M422
2019-10-24 12:59:50 -05:00
Timm
e02b06672c
Increase MMU2 serial buffer size with USB serial ( #15646 )
2019-10-24 12:28:41 -05:00
Giuliano Zaro
0f5d457252
Allow redundant temp sensor with SINGLENOZZLE ( #15650 )
2019-10-24 12:23:06 -05:00
Daniel Callander
475041656c
Reset position_shift on G28 ( #15653 )
2019-10-24 12:20:09 -05:00
Bo Herrmannsen
04a55c9188
Fix LPC176x build script for Python 3 ( #15637 )
...
Co-Authored-By: Sven Holzmann <powerprobot@users.noreply.github.com>
2019-10-24 12:16:02 -05:00
milkpirate
6bcd4eb12d
Fix M420 (UBL) undefined variables ( #15621 )
2019-10-24 12:07:17 -05:00
Luu Lac
efeb6efe77
Set pullup on BTN_BACK pin ( #15654 )
2019-10-24 12:04:45 -05:00
Evgeny-SPB
b7db91c46d
Fix apply_rotation function ( #15636 )
2019-10-24 12:02:27 -05:00
Luu Lac
0b0b822671
Add note: TMC2209 requires stealthChop for Sensorless Homing ( #15658 )
2019-10-24 11:58:37 -05:00
Roxy-3D
3642a12fc1
fix parameter order of mark, marked and unmark
...
The parameter order was wrong on mark(), marked() and unmark().
This was breaking the G26 Mesh Validation algorithm.
2019-10-23 11:34:24 -05:00
Scott Lahteine
af214ff121
Fix up PSU_CONTROL checks
2019-10-22 16:16:12 -05:00
Scott Lahteine
62b875f918
Fix PLR condition saving retract
2019-10-22 16:16:12 -05:00
Robby Candra
2c42526763
FIx Estimation String Pos
2019-10-22 10:02:27 +07:00
Robby Candra
d64ab63026
Fix Estimation String Macro
2019-10-22 08:16:29 +07:00
Scott Lahteine
f00b48f9a8
Expand encoder value range
2019-10-21 18:56:24 -05:00
Scott Lahteine
160c8be191
Fix BABYSTEP_DISPLAY_TOTAL output
2019-10-21 13:53:19 -05:00
Robby Candra
52a8bbefcf
Make sure estimate time = 0 not displayed
2019-10-20 23:44:05 +07:00
Robby Candra
6241bcf0c8
Fix Progress at the end of print.
2019-10-20 06:06:48 +07:00
Evgeny Zyatkov
9470554f63
Fix DUE HAL serial defines ( #15594 )
2019-10-19 12:30:38 -05:00
Robby Candra
f368c14a61
Fix Probe Manually Grid ( #15598 )
2019-10-19 12:29:50 -05:00
Scott Lahteine
f2ce4a25a3
Fix host_response_handler debug
2019-10-18 16:47:13 -05:00
Chris Pepper
11f1392026
Fix Python3 (Windows) compatibility ( #15597 )
2019-10-18 21:15:26 +01:00
Scott Lahteine
725ec68faa
[cron] Bump distribution date
2019-10-18 00:00:04 -05:00
Robby Candra
16ae9ee88b
Update Configuration_adv
2019-10-17 05:37:22 +07:00
Robby Candra
9b88c3e79b
DOGM Progress Display, option to disable display rotation
2019-10-17 05:26:09 +07:00
Scott Lahteine
0652f19673
Fix M420 for moved probe methods
2019-10-16 15:56:34 -05:00
Scott Lahteine
bb381e22b2
Fix left-shift warning
2019-10-16 15:42:46 -05:00
Bo Herrmannsen
0d7736d663
Enable M191 ( #15531 )
2019-10-16 15:02:37 -05:00
Antti Andreimann
40de135d4d
Fix CUSTOM_USER_MENU_TITLE non-translated string ( #15575 )
2019-10-16 13:53:12 -05:00
Francois Rainville
dd0c5de4c7
Provide LONG_FILENAME_LENGTH for headers ( #15582 )
2019-10-16 13:51:18 -05:00
Jason Smith
832cb7e1ac
Z_STEPPER_AUTO_ALIGN — To align with Z stepper points ( #15195 )
2019-10-16 13:39:58 -05:00
Robby Candra
7af99d03d3
Don't show prefix if no elapsed time
2019-10-16 16:25:52 +07:00
Robby Candra
bf850827f7
Fix Progress Display
2019-10-16 16:18:20 +07:00
Scott Lahteine
e0e406dbcc
[cron] Bump distribution date
2019-10-16 00:00:03 -05:00
InsanityAutomation
b2eda1af2f
Fix typo in G34 configuration ( #15572 )
2019-10-15 17:22:13 -05:00
Scott Lahteine
0ff57c640c
Fix compile warning
2019-10-15 17:13:07 -05:00
Scott Lahteine
3949d246df
Fix ESP32 name conflict
2019-10-15 17:13:07 -05:00
Scott Lahteine
b7b303f4bf
Spindle/Laser power in planner blocks ( #14437 )
2019-10-15 16:10:20 -05:00
Jason Smith
53abfdc2c3
Fix BLTOUCH and FAN PWM conflicts on SKR E3 boards ( #15547 )
2019-10-15 14:18:46 -05:00
Slawomir Ciunczyk
8668571bee
Update Polish language ( #15569 )
2019-10-15 13:36:17 -05:00
Scott Lahteine
faacfe13c2
Tweak M105 layout
2019-10-15 13:35:13 -05:00
Antti Andreimann
d47f29bd4c
Give a dummy response to M105 with zero thermistors ( #15568 )
2019-10-15 13:30:52 -05:00
Piotr
fe4c69b64a
Poll *all* enabled endstop pins ( #15525 )
2019-10-15 13:28:04 -05:00
Slawomir Ciunczyk
99f983d066
Update Polish language ( #15541 )
2019-10-15 12:34:18 -05:00
InsanityAutomation
0074d63962
Vendor version override ( #14189 )
...
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
2019-10-15 12:32:44 -05:00
Scott Lahteine
7622973a31
Fix elapsed time overflow warning
2019-10-15 11:47:24 -05:00
Scott Lahteine
d57a668097
Update Spanish Translation ( #15556 )
2019-10-15 11:38:57 -05:00
Markus Towara
437978d349
Bring SPI_SENSORLESS code up to date ( #15560 )
2019-10-15 11:34:45 -05:00
Tanguy Pruvot
a988f9304d
reduce the required size with uint16_t modifiers
2019-10-14 20:11:59 +02:00
Tanguy Pruvot
21867c7fef
elapsed time overflow warning fix
...
tried to fix it with snprintf in libs/duration_t.h but its worst... :/
2019-10-14 20:00:59 +02:00
sL1pKn07
d37bd33c31
Update Spanish Translation
2019-10-14 16:02:54 +02:00
Roman Moravčík
b4f82d1081
Update Slovak language ( #15527 )
2019-10-13 17:35:38 -05:00
Tanguy Pruvot
ee20f21a24
Fix undefined max in multi-language ( #15521 )
2019-10-13 18:31:28 -04:00
Giuliano Zaro
7714152013
Update Italian language ( #15533 )
2019-10-13 17:28:03 -05:00
Bo Herrmannsen
5ad9257df4
Fix DUE HAL serial defines ( #15536 )
2019-10-13 17:06:15 -05:00
Krystian Booker
62aa137548
Fixed pid_autotune_menu made pid_label accessible ( #15551 )
2019-10-13 16:46:06 -05:00
Roxy-3D
37550e9d98
Allow 3-digit LCD Display of value
...
The LCD Display shows 3 digits of precision, not 4.
So change the bounding value to something more rational.
2019-10-13 14:34:51 -05:00
Roxy-3D
05eed72b69
Allow LCD Menu to adjust Junction Deviation lower
...
Allow LCD Menu to adjust Junction Deviation lower than .01. Some machines currently have a JUNCTION_DEVIATION_MM value as low as .005 mm. In the case of non-Linear-Advance machines... The upper limit is raised to .5 mm.
Probably more thought needs to be given to the Linear Advance case. It maybe it doesn't need a special case and should just use the same bounds as the non-Linear Advance case.
2019-10-12 17:36:43 -05:00
Gustavo Alvarez
df09532a9c
Reassign FIL_RUNOUT_PIN for ReARM boards ( #15519 )
...
Reassign FIL_RUNOUT_PIN from P1_18 to P1_19
P1_18 is connected to a buffer in order to output 5V making it unsuitable for input.
2019-10-12 21:02:20 +01:00
Haxk20
1df90aaf0e
Followup to num2str update ( #15518 )
2019-10-11 08:45:15 -05:00
Matthew Piercey
ac8083588b
Add config for Wanhao Duplicator i3 v2.1
2019-10-11 00:59:58 -05:00
Robby Candra
e79666a82b
Followup to "Fix G2/G3 rounding" ( #15510 )
2019-10-10 21:16:37 -05:00
LinFor
b20d5a7cc6
Estimate Remaining Time (graphical display) ( #15497 )
2019-10-10 21:03:33 -05:00
Scott Lahteine
5641adb01b
Clean up stray tabs
2019-10-10 20:16:16 -05:00
Ed Williams
d8aeeb8ff6
Fix G2/G3 rounding error ( #15507 )
2019-10-10 19:50:08 -05:00
Roxy-3D
2cf35267c4
Set Junction Deviation value from Jerk and Default Acceleration ( #15509 )
...
Formula: `0.4 * sq(min(xjerk, yjerk)) / (default accel)`
2019-10-10 19:44:15 -05:00
Robby Candra
6f60838736
Fix PAUSE_MODE_CHANGE_FILAMENT menu item ( #15501 )
2019-10-10 19:39:32 -05:00
Robby Candra
ac466ecf74
Change Junction Deviation to Classic Jerk ( #15505 )
2019-10-10 19:31:59 -05:00
Scott Lahteine
3664beec29
Don't refresh on status line changes
2019-10-10 19:29:17 -05:00
Scott Lahteine
13cf417a98
[cron] Bump distribution date
2019-10-10 00:00:04 -05:00
ANMay-ru
b119c14017
Clean up LCD print, align ( #15498 )
2019-10-09 20:41:44 -05:00
Jason Smith
46763efb75
Fix tool-change move with hotend offset ( #15491 )
2019-10-09 19:48:00 -05:00
Marcio Teixeira
6a865a6146
Multi-language support ( #15453 )
2019-10-09 19:46:10 -05:00
Marcio Teixeira
dc14d4a13c
Improvements and fixes to Lulzbot UI ( #15490 )
2019-10-09 19:44:49 -05:00
Scott Lahteine
e6055dce76
Followup to position refactor
2019-10-08 22:08:05 -05:00
Scott Lahteine
b4d48fdc91
Followup to #15481
2019-10-08 21:38:02 -05:00
Scott Lahteine
af80653f3f
Always report all PIDs in M503
...
Fix #14474
2019-10-08 21:07:19 -05:00
Scott Lahteine
914605c89c
gcc is forgiving of stray ;
2019-10-08 20:36:39 -05:00
Scott Lahteine
89490171ef
Use "concatenatable" language codes
2019-10-08 20:17:23 -05:00
Scott Lahteine
c0005e939c
Enable junction deviation by default ( #15481 )
2019-10-08 19:42:18 -05:00
Scott Lahteine
1df6c7a46c
Work around a compiler bug
...
See #15478
2019-10-08 19:27:03 -05:00
Scott Lahteine
5becda25c5
Followup to E renumbering
2019-10-08 17:37:17 -05:00
Scott Lahteine
cb1cb72c76
Fix Move Z menu item
2019-10-08 17:24:40 -05:00
LinFor
58f81f8e7e
Followup to progress override ( #15488 )
2019-10-08 15:24:14 -05:00
Scott Lahteine
d45ab47139
[cron] Bump distribution date
2019-10-08 14:33:57 -05:00
Scott Lahteine
9dcccc11ba
Fix extra condition
2019-10-07 22:36:49 -05:00
Scott Lahteine
cc822c1a05
Use lambdas in menus, where possible ( #15452 )
2019-10-07 19:44:33 -05:00
Scott Lahteine
59508edf64
Suppress data[] array warning
2019-10-07 19:32:23 -05:00
Scott Lahteine
e84389c976
Fix G2/G3 workspace plane parameters ( #15475 )
2019-10-07 17:09:20 -05:00
LinFor
19b7be067c
Allow M73 to override SD position ( #15449 )
2019-10-07 16:38:58 -05:00
chzj333
d04561805b
Support for BTT SKR Mini E3 v1.2 ( #15476 )
2019-10-07 15:45:11 -05:00
InsanityAutomation
71526fa5ce
Fix ExtUI onMeshUpdate event ( #15477 )
2019-10-07 15:39:52 -05:00
Scott Lahteine
56595a4c9c
Improve G2/G3 precision
...
See https://github.com/MarlinFirmware/Marlin/issues/14745#issuecomment-538781253
2019-10-07 00:03:17 -05:00
Scott Lahteine
211ff67440
Patch blocking and manual moves
2019-10-06 23:58:19 -05:00
Tanguy Pruvot
c6ffa7f38d
MKS Robin: SD pins not required (SDIO) ( #15474 )
2019-10-06 23:20:43 -05:00
Scott Lahteine
519cc1bc67
NUM_AXIS is now obsolete
2019-10-06 22:18:16 -05:00
Scott Lahteine
9188ce1a8d
Add JOIN for simple append
2019-10-06 22:01:06 -05:00
Scott Lahteine
51ae13fc8c
Compact MIN/MAXTEMP_ALL
2019-10-06 21:58:58 -05:00
Scott Lahteine
5449088a8e
Fix Japanese language extra define
2019-10-06 21:58:58 -05:00
Me No Dev
fc6a0937b8
Improve Malyan M200 integration ( #15462 )
2019-10-05 22:37:22 -05:00
Giuliano Zaro
a1ad01e4ab
Limit Case Light PWM ( #15459 )
2019-10-05 22:32:50 -05:00
Scott Lahteine
f8498d8a52
GET_TEXTF => GET_TEXT_F
2019-10-05 20:47:28 -05:00
LinFor
e854eb933d
Allow pins overrides for SKR V1.3 ( #15451 )
2019-10-05 20:40:01 -05:00
Jimmy Page
203d260a41
Update Japanese font and translation ( #15470 )
2019-10-05 20:35:20 -05:00
Daniel Andersen
0076e1e792
Fix CR10 Stock Display timing with SKR_PRO V1.1 ( #15446 )
2019-10-05 20:33:46 -05:00
Giuliano Zaro
a3ec573984
Uniform fan speed & case light
2019-10-05 18:34:11 -05:00
Giuliano Zaro
ff55601dc3
Update Italian language
2019-10-05 18:30:48 -05:00
Roman Moravčík
b90dff020e
Update Slovak language
2019-10-05 18:29:17 -05:00
Giuliano Zaro
43aba9f918
Fix compile errors & temp range
2019-10-05 18:27:03 -05:00
Scott Lahteine
1ac629f919
[cron] Bump distribution date
2019-10-05 00:00:09 -05:00
Luu Lac
5d81d7cefe
if no HOTENDS
2019-10-04 16:18:18 -05:00
Tanguy Pruvot
895f64fbab
Add missing MKS Robin TOUCH_CS_PIN ( #15445 )
2019-10-04 01:51:07 -05:00
Scott Lahteine
b7dfbb6af5
[cron] Bump distribution date
2019-10-04 00:00:05 -05:00
Scott Lahteine
c83c2a5022
Patch compile glitches
2019-10-03 15:37:13 -05:00
Scott Lahteine
6b945eb548
Show "FILAMENT CHANGE" during filament change
2019-10-03 07:45:52 -05:00
Scott Lahteine
0322348924
Handle runout in runout.cpp
2019-10-03 06:27:30 -05:00
Scott Lahteine
72d791a736
Standardize active/paused functions
2019-10-03 06:27:30 -05:00
Scott Lahteine
719615a6b6
Simplify edit menu items
...
The `edit` part of menu items displaying values is not needed. Menu edit types can be modeled on sub-menus.
2019-10-03 06:27:30 -05:00
Scott Lahteine
273cbe931e
Aliases for common menu item types
2019-10-03 06:15:21 -05:00
tonokip
df48ef6df3
Fix step timer on Archim1 ( #15447 )
2019-10-03 03:29:15 -05:00
Scott Lahteine
acbe84c8ef
[cron] Bump distribution date
2019-10-03 00:00:05 -05:00
Scott Lahteine
d0ef7b6588
[cron] Bump distribution date
2019-10-02 00:00:04 -05:00
Oliver Jean Eifler
d52b908627
Fix coordinate size for G26 w/out arcs ( #15443 )
2019-10-01 20:02:27 -05:00
InsanityAutomation
438835f6a5
Configurable Max Accel, Max Feedrate, Max Jerk edit limits ( #13929 )
2019-10-01 19:59:48 -05:00
Scott Lahteine
f9400b6a3c
[cron] Bump distribution date
2019-10-01 00:00:05 -05:00
Scott Lahteine
7cd72de8bc
General cleanup, style
2019-09-30 22:57:23 -05:00
Scott Lahteine
806d64e1bf
X_SENSORLESS includes AXIS_HAS_STALLGUARD
2019-09-30 22:56:22 -05:00
Scott Lahteine
e3fd0519b3
Reduce need for UNUSED
2019-09-30 22:56:22 -05:00
Marcio Teixeira
e3ff27c95a
Prevent duplication of PSTRs to save memory ( #15435 )
2019-09-30 22:53:34 -05:00
LinFor
98f614ddb1
Use MAX_BED_POWER instead of BANG_MAX to heat outside PID_FUNCTIONAL_RANGE ( #15431 )
2019-09-30 22:19:12 -05:00
Marcio Teixeira
087fe0e9d6
Improve and fix LULZBOT_TOUCH_UI ( #15434 )
...
- Add start print confirmation dialog box
- Fix incorrect text colors in UI
- Adjust bio printer UI
2019-09-30 22:15:48 -05:00
Timm
b198f321c8
Add missing motion inline methods ( #15433 )
2019-09-30 19:57:22 -05:00
Giuliano Zaro
15efe8d839
Update Italian language ( #15436 )
2019-09-30 19:31:06 -05:00
Scott Lahteine
a9c259c77a
Patch PrintrboardG2 build (on spec)
2019-09-30 02:47:55 -05:00
DrDitto
55b8547f04
Simplify MKS_MINI_12864 init (move 5ms to u8g seq.) ( #15428 )
2019-09-30 02:11:58 -05:00
Scott Lahteine
b7a9481e01
[cron] Bump distribution date
2019-09-30 00:00:04 -05:00
Scott Lahteine
139b7196a0
Watchdog cleanup ( #15283 )
2019-09-29 17:57:29 -05:00
Scott Lahteine
24706aedbd
Fix Neopixel typos
2019-09-29 17:36:29 -05:00
Scott Lahteine
f307ff68f7
Multiply by float, not double
2019-09-29 17:25:27 -05:00
Scott Lahteine
74746c6573
Fix probe_offset EEPROM field test
2019-09-29 16:55:50 -05:00
Alex Somesan
10bbed7f69
Fix comma/semicolon typo ( #15420 )
2019-09-29 16:50:53 -05:00
Bob Kuhn
178dcd6fd8
SPI chaining with TMCStepper simplified interface ( #15179 )
2019-09-29 05:47:20 -05:00
Frederik Kemner
4564ad2920
Fix build if EXTRUDERS = 0 ( #15417 )
2019-09-29 04:32:24 -05:00
Scott Lahteine
50e4545255
Add custom types for position ( #15204 )
2019-09-29 04:25:39 -05:00
Tanguy Pruvot
43d6e9fa43
STM32F103.. reorganization, SKR mini fix ( #15398 )
2019-09-29 02:04:53 -05:00
Scott Lahteine
5e9898600b
[cron] Bump distribution date
2019-09-29 00:00:07 -05:00
Scott Lahteine
f2d93f61c3
Revert errant const
2019-09-28 23:52:54 -05:00
Scott Lahteine
7c5e6900e1
Tweak comment
2019-09-28 22:08:02 -05:00
Tim Moore
7e72768433
Info Menu: Runaway Watch state ( #14827 )
2019-09-28 21:53:40 -05:00
Scott Lahteine
81b9c7c6ee
No motion constraint before homing
...
Sensible approach to soft endstops before the machine is homed.
Ref: https://github.com/MarlinFirmware/Marlin/pull/15027#issuecomment-533301094
Co-Authored-By: comps <comps@nomail.dom>
2019-09-28 21:35:49 -05:00
Christian
ddded80ff3
Fix mixing for up to 6 steppers ( #15374 )
2019-09-28 19:12:23 -05:00
Scott Lahteine
8683d4abfd
Improved list-oriented macros
2019-09-28 19:03:07 -05:00
InsanityAutomation
0ca6abce72
Add reporting to M290 ( #15376 )
2019-09-28 16:58:48 -05:00
InsanityAutomation
e942b352c6
Fix Photograph Pin Sanity Check ( #15406 )
2019-09-28 16:18:23 -05:00
Ludy
41ea2d8c31
Fix auto-fan compile error ( #15402 )
2019-09-28 15:37:41 -05:00
InsanityAutomation
be3c4a7930
Bring Raptor pins in parity with others ( #15410 )
2019-09-28 15:35:13 -05:00
Ludy
f28f191ebf
Trailing whitespace ( #15403 )
2019-09-28 15:32:37 -05:00
Ludy
a628d77798
Fix compile error with 6 hot-ends ( #15405 )
2019-09-28 15:30:41 -05:00
Ludy
6509dc04f5
Fix German error ( #15404 )
2019-09-28 15:29:41 -05:00
Scott Lahteine
2277c6dffc
Optimize SD card reader, sorting ( #15395 )
2019-09-28 15:28:05 -05:00
Scott Lahteine
1834d86df5
Fix sanity check typos
2019-09-28 15:26:21 -05:00
InsanityAutomation
a6b0223eea
Revive and improve DELTA probe bounds, LRFB options ( #15372 )
2019-09-28 01:19:11 -05:00
Maxim
1b9fc64d8a
Add M997 support for SKR PRO 1.1 ( #15394 )
2019-09-28 00:54:30 -05:00
Scott Lahteine
f57ce2b40a
[cron] Bump distribution date
2019-09-28 00:00:04 -05:00
Scott Lahteine
ebfdf740bc
EZBoard only knows stock display
2019-09-27 22:08:13 -05:00
InsanityAutomation
5221e2d991
Restore Host Prompt Info ( #15387 )
2019-09-27 17:06:26 -05:00
Marcio Teixeira
02bbc51195
Keep C extension for now, restore (void) arg ( #15380 )
2019-09-27 14:02:35 -05:00
Giuliano Zaro
a8aca59c04
Update Italian language ( #15373 )
2019-09-27 13:05:53 -05:00
Scott Lahteine
4c16661153
Use named styles in draw_menu_item_static
2019-09-27 04:45:01 -05:00
Scott Lahteine
d683f98019
Return buffer in duration.toString
2019-09-27 04:45:01 -05:00
Scott Lahteine
dc65788511
Shorthand for __VA_ARGS__
2019-09-27 04:43:34 -05:00
Marcio Teixeira
a18d16fb8b
Do not implicitly concatenate localized strings ( #15383 )
2019-09-27 04:38:43 -05:00
Scott Lahteine
62e4e05a19
[cron] Bump distribution date
2019-09-27 00:00:04 -05:00
Berezovskyi Oleksandr
c0d5b57cf9
Init i2c for all i2c EEPROM use ( #15366 )
2019-09-26 22:25:56 -05:00
Scott Lahteine
665e45e0ba
Reduce string storage, use masking 'seen'
2019-09-26 04:30:55 -05:00
Scott Lahteine
455dabb183
Add a feedRate_t data type ( #15349 )
2019-09-26 01:28:09 -05:00
Scott Lahteine
ee7558a622
Tweaks to Z fade behavior
2019-09-26 01:15:47 -05:00
Scott Lahteine
d49d40f7b0
Home XYZ newline
2019-09-25 22:26:16 -05:00
Scott Lahteine
b72fd7ea9c
Supply 'super' for servo subclasses
2019-09-25 22:07:14 -05:00
Scott Lahteine
b2e1f77f58
Fix extraneous "Home XYZ First" message
2019-09-25 21:57:20 -05:00
Scott Lahteine
9a209012b5
Improve M114_DETAIL comment
2019-09-25 20:29:29 -05:00
Scott Lahteine
39578a5919
Fix probe without leveling
2019-09-25 19:57:52 -05:00
Marcio Teixeira
8cbb5350ad
Refactor joystick support in ExtUI ( #15318 )
2019-09-25 18:46:36 -05:00
DrDitto
04e4eb35be
MKS_MINI, FYSETC RGB, backlight ( #15334 )
2019-09-25 18:41:04 -05:00
Scott Lahteine
ddd9d9032a
Fix option / string name conflict
2019-09-25 17:12:13 -05:00
Robby Candra
c3f09e2b1b
Set MAX_OVERSHOOT_PID_AUTOTUNE to 30 ( #15257 )
2019-09-25 09:43:00 -05:00
Jason Smith
f98999ca20
Fix includes in RAMPS_DUO and RAMPS_SMART ( #15321 )
2019-09-25 09:42:03 -05:00
Scott Lahteine
0b4aedf13e
Less use of "this"
2019-09-25 09:29:58 -05:00
Scott Lahteine
661c3cfc99
Fix mesh bounds for MBL
2019-09-25 09:05:46 -05:00
Scott Lahteine
25c4c2f24e
Fix bool in M851
2019-09-25 08:39:11 -05:00
Scott Lahteine
da1bda493e
Apply Marlin conventions to M851
2019-09-25 03:57:16 -05:00
InsanityAutomation
e9cf46a9a5
M851 XY 3 point followup (incomplete) ( #15361 )
2019-09-25 02:43:41 -05:00
Jason Smith
66d0221077
Fix build with more than 2 Trinamic E steppers ( #15329 )
2019-09-25 02:30:07 -05:00
Robby Candra
9c288a682d
Followup to probe_at_point change ( #15342 )
2019-09-25 02:29:10 -05:00
Marcio Teixeira
149e9b733e
Simplified ExtUI language selection ( #15359 )
2019-09-25 01:25:21 -05:00
Jason Smith
53124ca6b7
Fix 32-bit crash due to fwretract_settings_t pack(1) ( #15333 )
2019-09-25 01:08:30 -05:00
Scott Lahteine
bd6d144cdb
[cron] Bump distribution date
2019-09-25 00:00:04 -05:00
Scott Lahteine
5288c399ce
Patch probe offset name, defines
2019-09-24 23:39:23 -05:00
Scott Lahteine
4e8d9fe59b
zprobe_offset => probe_offset
2019-09-24 23:36:09 -05:00
Scott Lahteine
3819f79945
Fix pid_output declaration
2019-09-24 22:32:13 -05:00
InsanityAutomation
df1e51258a
Add M851 X Y probe offsets ( #15202 )
2019-09-24 21:29:21 -05:00
Scott Lahteine
ebc9a8a0b0
ExtUI patch followup
2019-09-24 20:21:31 -05:00
Marcio Teixeira
4ff59d178d
LULZBOT_TOUCH_UI extended character set ( #15301 )
2019-09-24 18:49:40 -05:00
Scott Lahteine
bd2b44c4ed
Require newest TMCStepper
2019-09-24 18:00:06 -05:00
Marcio Teixeira
bafcd084cc
LULZBOT_TOUCH_UI performance/cosmetic fixes ( #15319 )
2019-09-24 17:46:00 -05:00
Jason Smith
9aaa056286
Fix SCARA build from Arduino IDE ( #15317 )
2019-09-24 17:29:25 -05:00
Scott Lahteine
48e2f90304
Improve TMC sanity checks
2019-09-24 17:20:39 -05:00
Scott Lahteine
07eb213046
[cron] Bump distribution date
2019-09-24 00:00:11 -05:00
Scott Lahteine
5e13fe989f
Rename some feedrate-oriented functions
2019-09-23 22:36:41 -05:00
Scott Lahteine
9e7e8e229c
[cron] Bump distribution date
2019-09-23 00:00:08 -05:00
Scott Lahteine
6c62732ae1
Handle no Timer 3C
2019-09-22 21:50:18 -05:00
Scott Lahteine
7fc4f7b815
[cron] Bump distribution date
2019-09-21 00:00:13 -05:00
Scott Lahteine
13d725d24d
Tweak debug messages
2019-09-20 23:35:22 -05:00
Jason Smith
6ed2bf631d
Fix FILAMENT_RUNOUT_SCRIPT without ADVANCED_PAUSE_FEATURE build ( #15313 )
2019-09-20 00:50:11 -05:00
Jason Smith
514223f960
Fix BACKLASH_COMPENSATION compiler issues ( #15307 )
2019-09-20 00:48:41 -05:00
Scott Lahteine
de78b61d35
[cron] Bump distribution date
2019-09-20 00:00:10 -05:00
InsanityAutomation
6a312fae80
Add before/after dir change delays ( #15314 )
2019-09-19 23:05:17 -05:00
Scott Lahteine
1803c27afb
Fix macros for overloaded comparisons
2019-09-19 02:16:40 -05:00
Scott Lahteine
86e0b9eb05
[cron] Bump distribution date
2019-09-19 00:00:08 -05:00
Marcio Teixeira
7f117bfc60
EXTENSIBLE_UI Joystick support ( #15303 )
2019-09-18 19:35:03 -05:00
Jason Smith
252f31b6f1
Fix/improve backoff feedrates ( #15300 )
2019-09-18 17:04:13 -05:00
Scott Lahteine
bcf630d8d1
Clarify a sanity check
2019-09-18 16:43:30 -05:00
Scott Lahteine
c44b5fd13a
Try to fit logo by narrowing icons
2019-09-18 16:43:30 -05:00
Scott Lahteine
d5a34afa56
Undefine pins only in debug list
2019-09-18 11:53:42 -05:00
Scott Lahteine
712aaa26d5
Use provided 'constrain'
2019-09-18 04:07:14 -05:00
Scott Lahteine
1a1375964f
Drop unused G26 function
2019-09-18 04:07:14 -05:00
Robby Candra
787d522036
LCD Size Defines ( #15297 )
2019-09-18 02:58:58 -05:00
Marcio Teixeira
b590ae4875
LULZBOT_TOUCH_UI: Only use %S on AVR ( #15292 )
2019-09-18 02:33:26 -05:00
Scott Lahteine
ce74e4b3e4
Undefine… redux
2019-09-18 00:28:26 -05:00
Scott Lahteine
356b582a9f
[cron] Bump distribution date
2019-09-18 00:00:05 -05:00
Scott Lahteine
b73744f9e7
Update ExtUI, add test under DUE ( #15298 )
2019-09-17 23:41:34 -05:00
Scott Lahteine
b39ab3db37
Sanity-check for SD reprint
2019-09-17 23:34:14 -05:00
Scott Lahteine
34d521234d
Undefine pins to reduce warnings
2019-09-17 23:34:14 -05:00
Scott Lahteine
73ac213cdd
Fix FileList::isAtRootDir
2019-09-17 23:34:14 -05:00
Scott Lahteine
b71a755a30
Add float suffix in G33
2019-09-17 23:30:27 -05:00
Scott Lahteine
c353eaa146
Misc changes from struct refactor ( #15289 )
2019-09-17 18:16:28 -05:00
Tanguy Pruvot
7c3d52cd6b
HAL_DUE build fix ( #15286 )
2019-09-17 04:51:27 -05:00
Scott Lahteine
2405ccb7ef
Patch use of UNUSED
2019-09-17 00:05:35 -05:00
Scott Lahteine
282c39e3d0
[cron] Bump distribution date
2019-09-17 00:00:06 -05:00
Tanguy Pruvot
d277e93f4d
Configurable TOUCH_BUTTONS repeat delays ( #15245 )
2019-09-16 21:32:55 -05:00
Scott Lahteine
f01f0d1956
Drop C-style 'void' argument
2019-09-16 20:31:21 -05:00
Scott Lahteine
7d8c38693f
Formatting
2019-09-16 20:31:21 -05:00
Scott Lahteine
a06010e08a
Macrofy attachInterrupt
2019-09-16 20:31:20 -05:00
Marcio Teixeira
4c00ddae56
Remove obsolete LULZBOT_TOUCH_UI code ( #15284 )
2019-09-16 19:45:05 -05:00
Robby Candra
98233b1de0
Add root flag to CardReader ( #15275 )
2019-09-16 17:49:55 -05:00
Tanguy Pruvot
eb1a368277
Fix Lerdge K typos ( #15273 )
2019-09-16 16:50:57 -05:00
Marcio Teixeira
7a569ad4d0
LULZBOT_TOUCH_UI fixes. Fix some warnings. ( #15276 )
2019-09-16 16:49:46 -05:00
Bas Stottelaar
847e4ced11
Fix M43 without watchdog ( #15280 )
2019-09-16 16:09:43 -05:00
Scott Lahteine
7e95ee9e4b
Patch missing millis
2019-09-16 15:57:25 -05:00
Scott Lahteine
d63e0f6d98
Pending refactor tweaks
2019-09-16 15:10:14 -05:00
Scott Lahteine
9c218381c5
[cron] Bump distribution date
2019-09-16 00:00:05 -05:00
J.C. Nelson
896162b722
Add pins for Lerdge X and K. ( #15271 )
2019-09-15 15:23:04 -05:00
Giuliano Zaro
c96844fae2
[SAMD51] Remove RuRamps4D ( #15264 )
2019-09-15 14:17:20 -05:00
Tanguy Pruvot
02d400e413
STM32F1: Sync SPI changes from maple master ( #15266 )
2019-09-15 13:46:17 -05:00
Scott Lahteine
20fbb751f1
Tell externals it's Marlin
2019-09-15 03:12:44 -05:00
Scott Lahteine
d5f5203880
Use "mount" as card verb
2019-09-15 03:12:44 -05:00
Tanguy Pruvot
2386c147ad
Mount the SD card early ( #15255 )
2019-09-15 03:05:01 -05:00
Scott Lahteine
c4090b1375
[cron] Bump distribution date
2019-09-15 00:00:05 -05:00
Scott Lahteine
79635f8e94
Fix some debug out lines
2019-09-14 16:45:06 -05:00
Scott Lahteine
843a19102c
Shorten an option description
2019-09-14 16:45:04 -05:00
Marcio Teixeira
18821f29d5
LULZBOT_TOUCH_UI: Localization, runtime language selection ( #15249 )
2019-09-14 06:51:49 -05:00
Tanguy Pruvot
15bea5043c
Followup to SD menu optimization ( #15252 )
2019-09-14 06:42:28 -05:00
Evgeny Zyatkov
61e3f119f4
FYSETC_MINI_12864 pins for SKR PRO 1.1 ( #15253 )
2019-09-14 06:22:30 -05:00
Scott Lahteine
3d0ead7dcb
Bring Configuration_adv.h up to date
2019-09-14 04:30:17 -05:00
Scott Lahteine
465c6d9230
Simpler Allen Key config. Fixes, cleanups from refactor ( #15256 )
2019-09-14 03:05:10 -05:00
Scott Lahteine
ffb418b226
Move some SD comments
2019-09-14 02:31:47 -05:00
Robby Candra
acd76e8609
Allow odd mm bed sizes ( #15258 )
2019-09-14 01:26:14 -05:00
Scott Lahteine
bbbfb0015b
[cron] Bump distribution date
2019-09-14 00:00:14 -05:00
Scott Lahteine
ef8ce2e2e5
Allow TEMP_CHAMBER_PIN override
2019-09-13 18:45:59 -05:00
Scott Lahteine
f9961ddebb
Optimize SERIAL_ECHOPAIR_F
2019-09-13 08:47:41 -05:00
Frederik Kemner
3348a7d223
Fix Info Menu with EXTRUDERS==0 ( #15230 )
2019-09-13 01:36:44 -05:00
Tanguy Pruvot
2435c6082a
STM32F1: AUTO_BED_LEVELING_UBL build fixes ( #15240 )
2019-09-13 01:33:33 -05:00
Scott Lahteine
ae7ae89bb3
[cron] Bump distribution date
2019-09-13 00:00:04 -05:00
Robby Candra
3f129b6574
Touch Buttons variable repeat delay ( #15236 )
2019-09-12 22:14:24 -05:00
Tanguy Pruvot
5bf635cec2
STM32F1: Only include USBComposite if flagged ( #15243 )
2019-09-12 18:35:27 -05:00
Robby Candra
1ab3521351
Optimize Media Menu display/scrolling ( #15233 )
2019-09-12 18:06:07 -05:00
Tanguy Pruvot
f1162243f6
STM32F1: No USBSerial without USB-serial bridge ( #15242 )
2019-09-12 17:59:31 -05:00
Scott Lahteine
7cf1befbec
[cron] Bump distribution date
2019-09-12 00:01:23 -05:00
Scott Lahteine
1d574b0f6a
Tweak config spaces
2019-09-11 17:32:54 -05:00
Tanguy Pruvot
3eacc3bfce
french update, g26, usb ( #15229 )
...
french update for G26 and USB.
2019-09-11 14:36:39 -05:00
Gustavo Alvarez
2b628553d3
Update Spanish language ( #15189 )
2019-09-11 12:14:10 -05:00
reloxx13
05cd483413
STM32F1: Support M997 - Reset and begin flash ( #15209 )
2019-09-11 12:12:58 -05:00
Scott Lahteine
e3278f22f3
General formatting
2019-09-11 03:29:00 -05:00
Scott Lahteine
f9992c5f33
Implausible
2019-09-11 02:52:14 -05:00
Scott Lahteine
3648bce886
Tweak NOZZLE_CLEAN_START_POINT spacing
2019-09-11 01:50:24 -05:00
Scott Lahteine
6091e6300a
Fix G90, G91, M82, M83 rel/abs modes ( #15218 )
2019-09-11 01:29:33 -05:00
Scott Lahteine
41a3fbceac
[cron] Bump distribution date
2019-09-11 00:00:04 -05:00
Marcio Teixeira
47d19bab40
Lulzbot ExtUI Western language support ( #15208 )
...
Fix #15134
2019-09-10 20:07:03 -05:00
Scott Lahteine
c590e8ac05
Improve Power-loss Recovery ( #15135 )
2019-09-10 18:52:41 -05:00
Scott Lahteine
75927e17dd
Filament Width Sensor singleton ( #15191 )
2019-09-10 18:48:58 -05:00
Scott Lahteine
fe6ba4fd70
Tweak REMEMBER
2019-09-10 02:21:21 -05:00
Scott Lahteine
584c86bed1
More "zero extruders" changes ( #15213 )
2019-09-10 02:20:49 -05:00
Scott Lahteine
54abf3aeba
[cron] Bump distribution date
2019-09-10 00:00:06 -05:00
InsanityAutomation
dcc39421c5
Minor Pin Updates ( #15214 )
2019-09-09 23:58:57 -05:00
thisiskeithb
66338ed515
CR-10 Stock Display for SKR Mini 1.1 ( #15215 )
2019-09-09 23:56:02 -05:00
Scott Lahteine
f055f7c535
Add emergency_parser.h dependency
2019-09-09 18:04:25 -05:00
Scott Lahteine
841c8ce0d9
Remove PROMPT_INFO / PROMPT_GCODE_INFO ( #15210 )
2019-09-09 15:43:06 -05:00
Ludy
3c3a956a17
Fix compiling error BIGTREE_SKR_MINI ( #15197 )
...
Let's get STM32F1 working again!
2019-09-09 10:34:54 -05:00
Scott Lahteine
565a0e11ed
Prevent 'current' name conflict, if needed
2019-09-09 03:17:11 -05:00
Scott Lahteine
713157f712
Move L6470 enum
2019-09-09 00:27:53 -05:00
Scott Lahteine
5949c24afc
[cron] Bump distribution date
2019-09-09 00:00:05 -05:00
Scott Lahteine
dbea6f0022
STM32F1 USB cdc/msc composite device ( #15180 )
...
Co-Authored-By: bigtreetech <38851044+bigtreetech@users.noreply.github.com>
2019-09-08 02:28:22 -05:00
Luu Lac
8bca3fcf2c
Display chamber with HAS_TEMP_CHAMBER ( #15194 )
2019-09-08 02:20:18 -05:00
Roman Moravčík
ca0f47985b
Update Slovak language ( #15187 )
2019-09-08 01:47:36 -05:00
InsanityAutomation
0693767efa
ExtUI Pause/Stop on all Pause/Stop ( #15188 )
2019-09-08 01:47:07 -05:00
Scott Lahteine
1c3a1ab2c6
Use _MIN over MIN
2019-09-08 01:02:15 -05:00
Lucio Tarantino
8ac52aedff
M118 multiserial support ( #15176 )
2019-09-08 00:57:59 -05:00
Jamie
dbee0e9c54
Analog joystick jogging control ( #14648 )
2019-09-08 00:55:34 -05:00
Ludy
068c303742
More translatable LCD strings ( #15190 )
2019-09-08 00:15:25 -05:00
Tanguy Pruvot
ec3f29a33a
Fix linux_native long to int32 warnings ( #15192 )
2019-09-07 20:30:47 -05:00
ManuelMcLure
eed7c2fe2f
Fix 'echo:' in TMC parameters M503 report ( #15193 )
2019-09-07 20:29:38 -05:00
Ludy
6172cd2528
CHAMBER integration to GLCD ( #14981 )
2019-09-07 04:52:57 -05:00
Scott Lahteine
94948d3dcb
Compact some sanity conditions
2019-09-06 19:03:04 -05:00
Scott Lahteine
a3052da703
Move manual move to lcd section
2019-09-06 18:24:39 -05:00
AnHardt
b7b0021b5c
Fix Thermistor 75 ( #15181 )
2019-09-06 16:23:27 -05:00
Scott Lahteine
ca1a3476cb
[cron] Bump distribution date
2019-09-06 00:00:04 -05:00
Scott Lahteine
91c3b8e3ca
Reformat ADC cases
2019-09-05 20:02:31 -05:00
Scott Lahteine
4cdf7a1b93
Add ADC helpers to temp_info_t
2019-09-05 19:48:52 -05:00
Scott Lahteine
72876d9045
Clean up u8g defines
2019-09-05 17:09:24 -05:00
Scott Lahteine
8d036e94bf
Combine channel-based SPI headers
2019-09-05 17:09:24 -05:00
Scott Lahteine
70b3f4ded5
Pins error message
2019-09-05 15:44:13 -05:00
Ludy
01fd3f904f
Drop extra include ( #15171 )
2019-09-05 13:21:06 -05:00
Tanguy Pruvot
50e1bf57b9
Fix RRD/CR10 LCD on STM32F1/F4 ( #15172 )
2019-09-05 13:20:03 -05:00
Scott Lahteine
18dd5cb46a
Config comment patch
2019-09-05 01:48:12 -05:00
Scott Lahteine
bf3cd8e5aa
Tweak var names
2019-09-05 01:40:09 -05:00
Scott Lahteine
37d3c7288f
[cron] Bump distribution date
2019-09-05 00:00:04 -05:00
Scott Lahteine
7496e1cd67
whitespace
2019-09-04 21:55:41 -05:00
Scott Lahteine
060b360be3
Provide a good default contrast
...
In reference to #15139
2019-09-04 18:29:22 -05:00
kakou-fr
6b1c4dec46
Touch Mi: Add magnet Y position ( #15166 )
2019-09-04 18:09:12 -05:00
Tanguy Pruvot
85f0556118
Add XPT2046 calibration functions ( #15140 )
2019-09-04 17:32:20 -05:00
Scott Lahteine
cff502c6d4
Tweak REPRAPWORLD_KEYPAD config comment
2019-09-04 17:23:38 -05:00
Ludy
beffcd856b
Update German language, (c) ( #15164 )
2019-09-04 16:59:26 -05:00
Karl Andersson
123ecfe613
Allow MINIMUM_STEPPER_PULSE override with LV8729 ( #15162 )
2019-09-04 16:57:13 -05:00
Scott Lahteine
2d2d9da9f2
Tweak u8g impl file includes
2019-09-04 14:52:22 -05:00
Scott Lahteine
a07c4af393
Tweak animated draw call
2019-09-04 14:47:08 -05:00
Scott Lahteine
7ad5208267
Fix up boot screen code
...
Followup to #15125
Co-Authored-By: Ludy <ludy87@users.noreply.github.com>
2019-09-04 14:43:32 -05:00
Robby Candra
6b05d5d65d
Allow TOUCH_BUTTONS to be swapped ( #15100 )
2019-09-04 13:13:05 -05:00
George Fu
8e044ea898
Fix up Fysetc configs, pins. Fix menu type float5. ( #15157 )
2019-09-04 13:06:23 -05:00
Jamie
293b890940
Apply soft limits to G2/G3 final target ( #15156 )
2019-09-04 13:02:30 -05:00
Scott Lahteine
2563e32aa3
Format FWRETRACT config comments
2019-09-04 12:48:50 -05:00
Scott Lahteine
d9bbe0ff02
[cron] Bump distribution date
2019-09-04 00:00:03 -05:00
thisiskeithb
d577b3c21e
Fix MKS SGEN-L Pins ( #15153 )
2019-09-03 20:02:30 -05:00
AnHardt
89a2161cac
MINIMUM_STEPPER_DIR_DELAY in LA ( #15154 )
...
Add missed MINIMUM_STEPPER_DIR_DELAY after dir change in LinearAdvance interrupt.
2019-09-03 20:01:51 -05:00
Scott Lahteine
75efa3cdac
Reorganize HAL ( #14832 )
2019-09-02 19:49:58 -05:00
thisiskeithb
cdd5056aba
Increase MKS MINI 12864 default contrast ( #15139 )
2019-09-02 19:40:58 -05:00
Scott Lahteine
c97c393c4a
Fix "unqualified id" warning ( #15144 )
2019-09-02 19:35:05 -05:00
Scott Lahteine
12344085c0
Update temperature.cpp
2019-09-02 19:21:47 -05:00
Giuliano Zaro
12c595c61f
SAMD51 LCD support ( #15113 )
2019-09-02 05:45:02 -05:00
Scott Lahteine
23bb40d0ea
Fix MKS_MINI_12864 init
...
See #13550
Co-Authored-By: DrDitto <drditto@users.noreply.github.com>
2019-09-02 05:24:36 -05:00
Giuliano Zaro
9958f5e322
Home on G34 if steppers slept ( #15127 )
2019-09-02 02:44:48 -05:00
thisiskeithb
59152f2671
Flash-based EEPROM on SKR Mini E3 DIP ( #15128 )
2019-09-02 02:42:11 -05:00
Tanguy Pruvot
c9817105fb
Update French language ( #15129 )
2019-09-02 02:40:33 -05:00
Giuliano Zaro
e6a114b853
Update Italian language ( #15130 )
2019-09-02 02:39:40 -05:00
Gustavo Alvarez
54069823a0
Update Spanish language ( #15132 )
2019-09-02 02:36:32 -05:00
Scott Lahteine
93dcc22aae
Drop extra call to get_available_commands
2019-09-02 01:14:03 -05:00
Scott Lahteine
451a942e95
Suspend queue during wait_for_hotend
2019-09-02 01:14:03 -05:00
Scott Lahteine
b4715b29bb
[cron] Bump distribution date
2019-09-02 00:00:04 -05:00
Scott Lahteine
34b73426e5
Apply #ifdef/#ifndef where possible
2019-09-01 23:54:50 -05:00
Scott Lahteine
4078f2672e
Apply shorthand option macros
2019-09-01 23:43:48 -05:00
Scott Lahteine
a2e412c0ce
Rename command buffer var
2019-09-01 20:43:31 -05:00
weakset
ee240d21b9
Use Flash-based EEPROM on SKR mini-E3 ( #15126 )
2019-09-01 04:04:40 -05:00
Jason Smith
be051c890f
Fix Z_STEPPER_ALIGN_[XY] sanity error ( #15124 )
2019-09-01 04:00:20 -05:00
Scott Lahteine
586b334c2a
Split up stepper indirection ( #15111 )
2019-08-31 19:44:45 -05:00
Scott Lahteine
87b16ed5f6
Bring Configuration.h up to date
2019-08-31 07:03:51 -05:00
Scott Lahteine
66f1da762f
Use 'ui.' where possible
2019-08-31 01:07:01 -05:00
Robby Candra
26fa08548c
Add RGB565 Color Definitions for TFT ( #15099 )
2019-08-30 22:49:24 -05:00
Scott Lahteine
0f4d3e1bca
Fix ESP32 "DISABLED" name conflict
2019-08-30 22:37:28 -05:00
Scott Lahteine
1eeef30097
A single generate_click lambda
2019-08-30 19:17:59 -05:00
Tanguy Pruvot
c014f8dc78
Fix STM32F1 SPI warning (gcc 8.2.1) ( #15104 )
2019-08-30 18:15:04 -05:00
Tanguy Pruvot
d068470e18
Prevent Linux min/max error ( #15107 )
2019-08-30 17:46:09 -05:00
Bob Kuhn
ba91bca1eb
TMC SPI daisy chain support (experimental) ( #15081 )
2019-08-30 17:39:45 -05:00
Scott Lahteine
0bcb64403c
Revert _BV testing commit
...
This reverts commit 9223261ea9
2019-08-30 16:11:16 -05:00
Scott Lahteine
05ef9b2f55
[cron] Bump distribution date
2019-08-30 14:44:39 -05:00
Scott Lahteine
9223261ea9
Only define _BV in Marduino.h
2019-08-29 18:06:24 -05:00
Scott Lahteine
d25231aea8
Spacing, defined(), #include tweaks
2019-08-29 18:06:24 -05:00
Karl Andersson
7ebfae27e3
Fix HAL_STM32 SPI regression ( #15093 )
...
Reference: 0b47558
2019-08-29 17:00:01 -05:00
thisiskeithb
f5a1fabd38
Clarify TMC2209 Sensitivity vs. Others ( #15092 )
2019-08-29 16:57:56 -05:00
Ludy
3f77d6a551
Fix expire_status warning ( #15094 )
2019-08-29 16:05:22 -05:00
Robby Candra
38983fdfa9
Add 'Back' Button for Touch TFT 320x240 ( #15060 )
2019-08-29 01:19:07 -05:00
Scott Lahteine
8196ced2de
Leave LCD_PINS_Dn defined for other uses
...
Fix #14998
2019-08-29 00:57:20 -05:00
AlexandrZloy
0ebaea94be
Add stallGuard threshold for X2 ( #15042 )
2019-08-29 00:15:31 -05:00
Scott Lahteine
e1d65b8937
[cron] Bump distribution date
2019-08-29 00:00:03 -05:00
Tanguy Pruvot
ca5da026d6
dogm: u8g prototypes cleanup ( #15082 )
2019-08-28 23:49:51 -05:00
Scott Lahteine
a61c91ae9e
Use 'bugfix' branch of U8glib-HAL
2019-08-28 21:39:18 -05:00
Scott Lahteine
1d8ad7cf71
Safe changes from HAL cleanup
2019-08-28 21:21:47 -05:00
Scott Lahteine
95963121b0
Patch a u8g include
2019-08-28 20:09:02 -05:00
Scott Lahteine
7b99c26e80
Fix FTDI_EVE_LIB platform includes
2019-08-28 19:56:02 -05:00
Scott Lahteine
3ac76f0489
Invariant Marlin bootscreen ( #15057 )
2019-08-28 07:40:18 -05:00
Scott Lahteine
b2a4b6f34e
Don't use board url as override
2019-08-28 04:44:40 -05:00
Scott Lahteine
b8e4b993d6
Separate board website URL
2019-08-28 04:44:40 -05:00
Scott Lahteine
6341aefda3
Info menu tweak style
2019-08-28 04:43:42 -05:00
Marcio Teixeira
0f386d06a1
Followup fixes to ExtUI ( #15068 )
2019-08-28 04:23:13 -05:00
Luu Lac
081e4506ca
Fix G53 as prefix, G28 with CNC_COORDINATE_SYSTEMS ( #15069 )
2019-08-28 04:20:28 -05:00
Robby Candra
ca084dcfe8
Switch col vs row variable name ( #15072 )
2019-08-28 02:49:21 -05:00
Giuliano Zaro
604bdf0b43
Update Italian language ( #15076 )
2019-08-28 02:46:21 -05:00
InsanityAutomation
b7796bcce6
Disable steppers on M112 ( #15065 )
...
And change verbiage to not refer to "Emergency Stop."
2019-08-28 00:51:01 -05:00
Scott Lahteine
318356b6bc
[cron] Bump distribution date
2019-08-26 00:00:07 -05:00
ETE-Design
9d12788a9a
ADIMLab Gantry - Spelling Correction ( #15043 )
2019-08-25 20:51:06 -05:00
InsanityAutomation
f218405c36
Fix ExtUI invalid speed, timer ( #15031 )
2019-08-25 04:46:02 -05:00
Daniel Callander
155765646e
Add warning when trying to use JD with kinematic systems ( #15032 )
2019-08-25 04:43:53 -05:00
Scott Lahteine
7183a586d9
Add EZBOARD PT100 pin
2019-08-25 04:31:00 -05:00
Scott Lahteine
c7825e6719
Contrast over 63 assume 255 max
...
This is closer to the prior behavior.
2019-08-25 04:31:00 -05:00
Tim Moore
1461ee4d36
Make LCD_CONTRAST_MAX >= _LCD_CONTRAST_INIT ( #15046 )
2019-08-25 04:25:07 -05:00
Scott Lahteine
9e9e578234
[cron] Bump distribution date
2019-08-25 00:00:03 -05:00
Tim Moore
8033bc87ea
Turbo-back Info menu items ( #15049 )
2019-08-24 19:50:04 -05:00
Scott Lahteine
d6a16525c2
New Language: Vietnamese ( #13892 )
2019-08-24 03:40:28 -05:00
Marcio Teixeira
da601d5114
Update USB_FLASH_DRIVE_SUPPORT ( #15021 )
2019-08-24 01:47:19 -05:00
Scott Lahteine
20fc66f875
ADIMLab Granty v1 / v2 ( #15017 )
...
* # This is a combination of 18 commits.
# This is the 1st commit message:
Add Support for ADIMLab Granty
# The commit message #2 will be skipped:
# Update Configuration.h
# The commit message #3 will be skipped:
# Add files via upload
#
# Add Support for ADIMLab Granty
# The commit message #4 will be skipped:
# Create Configuration.h
# The commit message #5 will be skipped:
# Delete Configuration.h
# The commit message #6 will be skipped:
# Create Test.h
# The commit message #7 will be skipped:
# Add files via upload
# The commit message #8 will be skipped:
# Delete Test.h
# The commit message #9 will be skipped:
# Delete Configuration.h
# The commit message #10 will be skipped:
# Delete Configuration_adv.h
# The commit message #11 will be skipped:
# Add files via upload
#
# Add ADIMLab Pins
# The commit message #12 will be skipped:
# Add files via upload
#
# Add Bootscreen
# The commit message #13 will be skipped:
# Update Configuration.h
#
# Add Bootscreen
# The commit message #14 will be skipped:
# Update pins.h
#
# Add ADIMLab Board
# The commit message #15 will be skipped:
# Update boards.h
#
# Add ADIMLab Granty
# The commit message #16 will be skipped:
# Update Makefile
#
# Add ADIMLab Granty
# The commit message #17 will be skipped:
# Update boards.h
# The commit message #18 will be skipped:
# Update Makefile
* Add Support for ADIMLab Granty
* Optimize bootscreen
* Update Makefile
Updated Description
* Update boards.h
Updated Description
* Update pins_HJC2560C_REV2.h
Updated Description
* Update Configuration.h
Added Author + Custom_Machine_Name
* Create _Bootscreen.h
Add Bootscreen
* Add files via upload
Add ADIMLab Granty v1
* Update boards.h
Add ADIMLab Granty v1
* Update Makefile
Add ADIMLab Granty v1
* Update pins_HJC2560C_REV2.h
* Consolidate Granty configs
* config updates
2019-08-24 01:45:11 -05:00
Scott Lahteine
750256948e
Apply #ifdef
2019-08-24 01:42:48 -05:00
BigTreeTech
848dd740ba
Fix STM32F1 ADC read temperature error ( #15026 )
...
…after USB CDC connect.
2019-08-24 01:33:16 -05:00
Scott Lahteine
04a9962cb5
Fix: Contrast override in pins files
...
Move contrast handling to `Conditionals_post.h` so pins files can override the LCD defaults.
2019-08-24 00:58:05 -05:00
Scott Lahteine
8c73017a69
[cron] Bump distribution date
2019-08-24 00:00:04 -05:00
Scott Lahteine
09ee5a5da1
Merge remote-tracking branch 'upstream/bugfix-2.0.x' into bf2_granty_fix_15017
2019-08-23 23:45:37 -05:00
Tim Moore
efeea9bccf
pca9632_buzz fix ( #15020 )
2019-08-23 22:30:11 -05:00
Marcio Teixeira
e61e54acfd
Fix TURBO_BACK_MENU_ITEM compile error ( #15019 )
2019-08-23 22:29:00 -05:00
Tanguy Pruvot
0a280f00c2
Flag unused variables without buzzer ( #15016 )
2019-08-23 22:21:30 -05:00
Scott Lahteine
f2ad1ceb13
Update PT-BR
2019-08-23 21:13:14 -05:00
ManuelMcLure
9c87786464
Change default Re-ARM UART pin order ( #15037 )
2019-08-23 20:55:41 -05:00
Scott Lahteine
fdef32ce77
Shorten Website URLs
2019-08-22 19:37:04 -05:00
Scott Lahteine
7924e0d819
Add print at position shortcuts
2019-08-22 19:37:04 -05:00
Scott Lahteine
5c0e5c599f
Fix boot screen warning
2019-08-22 18:58:11 -05:00
Scott Lahteine
dd6efe96e7
Restore documented M503 behavior
2019-08-22 18:58:11 -05:00
Scott Lahteine
6429b8bfb8
Fix EZBoard platform test
2019-08-22 17:38:32 -05:00
Tanguy Pruvot
e604f76703
Enable contrast via LCD_CONTRAST_INIT ( #15006 )
2019-08-21 18:56:39 -05:00
ETE-Design
9d8e3d4d6f
Update pins_HJC2560C_REV2.h
2019-08-21 17:38:08 +02:00
ETE-Design
2526e2d32e
Update Makefile
...
Add ADIMLab Granty v1
2019-08-21 17:36:15 +02:00
ETE-Design
d858f44b35
Update boards.h
...
Add ADIMLab Granty v1
2019-08-21 17:34:44 +02:00
ETE-Design
0309a5f3af
Update pins_HJC2560C_REV2.h
...
Updated Description
2019-08-21 16:30:08 +02:00
ETE-Design
9434b81a82
Update boards.h
...
Updated Description
2019-08-21 16:27:45 +02:00
ETE-Design
6b35951e92
Update Makefile
...
Updated Description
2019-08-21 16:26:25 +02:00
Tanguy Pruvot
012f577bb0
STM32F1: Import (rogerclarkmelbourne) SPI class ( #15002 )
2019-08-21 06:22:23 -05:00
ETE-Design
4be98221f6
ADIMLab Granty pins/config ( #14919 )
2019-08-21 05:33:17 -05:00
Scott Lahteine
f7aac7a5b0
Add Support for ADIMLab Granty
2019-08-21 05:26:38 -05:00
ETE-Design
de122c9bbe
# This is a combination of 18 commits.
...
# This is the 1st commit message:
Add Support for ADIMLab Granty
# The commit message #2 will be skipped:
# Update Configuration.h
# The commit message #3 will be skipped:
# Add files via upload
#
# Add Support for ADIMLab Granty
# The commit message #4 will be skipped:
# Create Configuration.h
# The commit message #5 will be skipped:
# Delete Configuration.h
# The commit message #6 will be skipped:
# Create Test.h
# The commit message #7 will be skipped:
# Add files via upload
# The commit message #8 will be skipped:
# Delete Test.h
# The commit message #9 will be skipped:
# Delete Configuration.h
# The commit message #10 will be skipped:
# Delete Configuration_adv.h
# The commit message #11 will be skipped:
# Add files via upload
#
# Add ADIMLab Pins
# The commit message #12 will be skipped:
# Add files via upload
#
# Add Bootscreen
# The commit message #13 will be skipped:
# Update Configuration.h
#
# Add Bootscreen
# The commit message #14 will be skipped:
# Update pins.h
#
# Add ADIMLab Board
# The commit message #15 will be skipped:
# Update boards.h
#
# Add ADIMLab Granty
# The commit message #16 will be skipped:
# Update Makefile
#
# Add ADIMLab Granty
# The commit message #17 will be skipped:
# Update boards.h
# The commit message #18 will be skipped:
# Update Makefile
2019-08-21 05:25:00 -05:00
Scott Lahteine
4581957d93
Clean up some pins
2019-08-21 05:15:48 -05:00
Marcio Teixeira
bd1ced14e7
LulzBot Touch UI Followup ( #15007 )
2019-08-21 04:48:05 -05:00
Marcio Teixeira
69641f1420
Fix incompatible types error ( #15009 )
2019-08-21 04:15:37 -05:00
Marcio Teixeira
825c2c3dc4
Fix fan speed encoder scaling ( #15010 )
2019-08-21 03:49:43 -05:00
Scott Lahteine
f1942f6ec0
[cron] Bump distribution date
2019-08-21 00:00:04 -05:00
Scott Lahteine
5e777601f3
Add TURBO_BACK_MENU_ITEM option ( #14991 )
2019-08-20 19:37:03 -05:00
Scott Lahteine
0cc524b84f
Prevent BOARD_NAME conflict with env
2019-08-20 19:10:36 -05:00
InsanityAutomation
33f6d77281
Adjust homing backoff feedrate ( #14972 )
2019-08-20 03:44:52 -05:00
InsanityAutomation
5a7c0216f7
Misc. ExtUI fixes ( #14971 )
2019-08-20 03:44:17 -05:00
InsanityAutomation
6039893981
Creality pins updates ( #14979 )
2019-08-20 03:42:30 -05:00
MaukCC
8664b8e97b
Adding HMS434 machine ( #14931 )
2019-08-20 03:40:48 -05:00
Scott Lahteine
5c6e82743e
Followup to STM32F407
2019-08-20 03:11:34 -05:00
chzj333
0b47558a09
New board STM32F407 ( #14994 )
2019-08-20 03:05:12 -05:00
Tim Moore
67f8ba6fed
Allow pullup/downs on power loss pin ( #14986 )
2019-08-20 02:40:44 -05:00
thisiskeithb
19e21a8f10
Wanhao Duplicator i3 Mini config updates ( #14908 )
2019-08-20 02:38:31 -05:00
Ludy
05995d1fd6
Unify buzz methods as MarlinUI::buzz ( #14803 )
2019-08-20 02:01:37 -05:00
Scott Lahteine
29c12905f5
Minor HAL patches
2019-08-19 02:28:36 -05:00
Scott Lahteine
94397dbdb4
[cron] Bump distribution date
2019-08-19 00:00:07 -05:00
Scott Lahteine
17cd1a4f26
Tweak TOUCH_MI_DEPLOY_XPOS block
2019-08-18 23:38:12 -05:00
Scott Lahteine
dfcd437486
Base HAS_LCD_CONTRAST on display type
2019-08-18 23:38:12 -05:00
Scott Lahteine
3f678b0be5
Remove some extra F4 conditions
2019-08-18 23:37:25 -05:00
Scott Lahteine
4d1a662571
Fix STM32F7 STEPPER_ENABLE_PIN
2019-08-18 23:25:15 -05:00
Tim Moore
cd09e35f90
Remove extra M503 "M412" report ( #14985 )
2019-08-18 21:17:00 -05:00
InsanityAutomation
c5be59ddfe
Fix runout trigger on "inactive" sensor ( #14990 )
2019-08-18 21:11:33 -05:00
InsanityAutomation
af5a7a2925
Add missing ExtUI user confirmation ( #14992 )
2019-08-18 21:03:26 -05:00
Robby Candra
33d54c0d5a
Remove extra defines ( #14983 )
2019-08-18 21:00:20 -05:00
Scott Lahteine
403eefd272
Delete _Bootscreen.h
2019-08-18 20:18:58 -05:00
Scott Lahteine
bc93ac53b5
Fix #define typo in configs
2019-08-18 19:51:55 -05:00
Scott Lahteine
c8e476ad60
Embed some items in HAS_LCD_MENU
2019-08-18 18:41:51 -05:00
Scott Lahteine
9a3ee3be53
[cron] Bump distribution date
2019-08-18 00:00:04 -05:00
Scott Lahteine
9d9e2deb9b
Tweak UBL G29 status print
2019-08-17 20:15:10 -05:00
Robby Candra
823178c272
Use u8g int type for screen coordinates ( #14965 )
2019-08-17 19:58:38 -05:00
Ludy
6715fd159c
Animated Marlin boot screen ( #14961 )
2019-08-17 18:40:01 -05:00
Scott Lahteine
9e49f154d8
[cron] Bump distribution date
2019-08-17 15:47:17 -05:00
Marcio Teixeira
8bdb3d9970
Add CONTROLLERFAN_SPEED_Z_ONLY ( #14956 )
2019-08-16 21:57:19 -05:00
AnHardt
587d4a6373
Repair display throttling ( #14960 )
2019-08-16 21:17:09 -05:00
J.C. Nelson
fecf808d80
Fix lambda missing capture ( #14969 )
2019-08-16 21:15:27 -05:00
Bob Kuhn
66bfad3ced
Fix missing U8glib.h include ( #14966 )
2019-08-16 20:06:32 -05:00
J.C. Nelson
1bcc5c98a9
MalyanLCD: Pause, resume, more ExtUI ( #14852 )
2019-08-16 20:02:35 -05:00
Scott Lahteine
c3ff53a61c
STM32 u8g defines
...
Suggested by https://github.com/MarlinFirmware/Marlin/issues/14742#issuecomment-515753814
2019-08-16 18:48:29 -05:00
Tim Moore
4575978a1f
Fix auto power for chamber fan ( #14922 )
2019-08-16 18:42:24 -05:00
Marcio Teixeira
274934ad81
Add LULZBOT_TOUCH_UI ( #14967 )
2019-08-16 18:34:13 -05:00
Marcio Teixeira
179d6c4ed1
Add STARTUP_SCRIPT option. M17 parity with M18. ( #14953 )
2019-08-14 21:05:15 -05:00
Marcio Teixeira
36dfbaea8c
Add missing function declaration ( #14955 )
2019-08-14 17:52:57 -05:00
Marcio Teixeira
263d7d37af
"SD card" => "Media" ( #14951 )
2019-08-14 17:52:14 -05:00
Scott Lahteine
24ce8beb48
[cron] Bump distribution date
2019-08-14 00:00:11 -05:00
Tanguy Pruvot
4cc103958e
Alfawise Flash EEPROM, Z Servo Probe ( #14877 )
2019-08-13 23:41:17 -05:00
Joseph Bozarth
0fbb26c28f
M16 - Expected Printer Check ( #14924 )
2019-08-13 23:38:45 -05:00
Scott Lahteine
a26b57a36d
Minor pins cleanup
2019-08-13 19:40:08 -05:00
Acenotass
059f575d93
Update Russian language ( #14940 )
2019-08-13 19:19:44 -05:00
Timothy Hoogland
a67830bf67
TH3D EZBoard is LPC1769 ( #14936 )
2019-08-13 00:03:42 -05:00
Tanguy Pruvot
c6be989fca
Store EEPROM config in flash ( #14923 )
...
Avoid confusion between the 2 possible SDs...
2019-08-12 19:48:46 -05:00
Marcio Teixeira
13d8dc0b79
Fix incorrect print stat in ExtUI ( #14881 )
2019-08-10 19:25:30 -05:00
Marcio Teixeira
dc21e2e691
Increase XY nozzle offset range ( #14882 )
2019-08-10 19:24:41 -05:00
Marcio Teixeira
fa533846a7
Bury easter egg deeper ( #14883 )
2019-08-10 19:23:37 -05:00
Giuliano Zaro
af4bcb629a
SAMD51 typo fix ( #14885 )
2019-08-10 19:22:48 -05:00
Ludy
d7172a4558
Cleanup and conditions ( #14886 )
2019-08-10 19:22:18 -05:00
Johnny Eshak
03dbe16ccc
Compiling M43 on invalid conversion ( #14897 )
2019-08-10 19:20:40 -05:00
Giuliano Zaro
f085199f5b
SAMD51: Some LCD pin fixes ( #14915 )
2019-08-10 19:19:52 -05:00
Giuliano Zaro
d78086ccdc
SAMD51: Neopixel pin mapping ( #14913 )
2019-08-10 19:18:32 -05:00
Eric Ptak
9c5086e6af
[STM32F1] Simpler Flash EEPROM ( #14829 )
2019-08-10 19:14:31 -05:00
Tanguy Pruvot
0745d48993
Fix build with and without TOUCH_BUTTONS ( #14912 )
2019-08-10 18:22:11 -05:00
Tanguy Pruvot
5d2519ed50
Allow use of Fysetc SoftwareSerialM ( #14893 )
2019-08-10 01:45:36 -05:00
Robby Candra
d2d71caa3b
Clean up Touch pins. Better up/down touch response. ( #14900 )
2019-08-10 01:42:52 -05:00
Tanguy Pruvot
8cc0b4bf5e
Revert "Edit STEPS_PER_MM integer only" ( #14909 )
...
This reverts commit 2d98bb39bd
2019-08-10 00:58:21 -05:00
Giuliano Zaro
3129fd06f0
SAMD51: Update LCD pins ( #14907 )
2019-08-10 00:56:55 -05:00
Ludy
9479ec32f7
Fix Service Menu compile error ( #14903 )
2019-08-10 00:53:26 -05:00
Giuliano Zaro
a7f1021265
Fix SPI_ENDSTOPS compile error ( #14906 )
2019-08-09 17:00:20 -05:00
Chris Pepper
2971b48a12
Use PlatformIO 4 default dir structure ( #14879 )
2019-08-08 08:29:33 -05:00
Scott Lahteine
9624c90cfb
Remove HAL.h dependency in SoftwareSerial.h
2019-08-08 07:43:57 -05:00
Scott Lahteine
a6f682d860
[cron] Bump distribution date
2019-08-08 06:39:53 -05:00
Fourmi
eb3a3d249e
Fix TouchMI probe movement (left side) ( #14875 )
2019-08-08 02:40:48 -05:00
Tanguy Pruvot
535018ef0e
STM32F1: Dummy SoftwareSerial (as TMCStepper fallback) ( #14861 )
2019-08-08 02:25:52 -05:00
Ludy
528c9885f2
Fix wait_for_user + PAUSE_BEFORE_DEPLOY_STOW issue ( #14831 )
2019-08-08 01:52:20 -05:00
Scott Lahteine
c8e30b6639
Fix code attempting to sprintf %f ( #14869 )
...
Arduino doesn't (always) support `float` formatting in strings. So either cast to `int` or use `dtostrf()` to fix these usages.
2019-08-08 01:51:37 -05:00
Tanguy Pruvot
92c35d14a4
Non-fatal error from ps::access_start ( #14845 )
2019-08-07 00:43:00 -05:00
Tim Moore
77f637763c
Overlord configs. Fix buzzer, redundant temp. ( #14833 )
2019-08-06 23:25:47 -05:00
Giuliano Zaro
535eeace5f
Fix Bed, Chamber ADC condition ( #14866 )
2019-08-06 22:57:54 -05:00
Acenotass
3914bcfbb1
Russian correction ( #14862 )
2019-08-06 22:56:51 -05:00
Tim Moore
0fa7d86918
Fix thermistor names (info menu) ( #14860 )
2019-08-06 22:54:18 -05:00
Tanguy Pruvot
eecfcd124d
Finish STM32F4 SD-based settings storage ( #14844 )
2019-08-06 22:53:11 -05:00
Scott Lahteine
a0d782e46e
STM32F7xx is gone
2019-08-06 04:58:58 -05:00
Scott Lahteine
fd9f067a48
Robin FSMC / SPI pins
2019-08-06 04:57:49 -05:00
Scott Lahteine
579e4396e2
Reduce STM32_F4_F7 pin warnings
2019-08-06 04:57:15 -05:00
Scott Lahteine
fb579212ea
Reduce unused function warnings
2019-08-06 04:56:17 -05:00
Scott Lahteine
fc39c925ca
Grace period followup
2019-08-05 22:00:49 -05:00
Scott Lahteine
a9c5d524bb
Followup to MAX7219 / KILL_PIN patch
...
Co-Authored-By: Roxy-3D <roxy-3d@users.noreply.github.com>
2019-08-05 21:42:33 -05:00
Chris Pepper
f499cecf0d
Marlin Binary Protocol Mark II ( #14817 )
2019-08-05 20:41:53 -05:00
Robby Candra
5bc2fb022c
THERMAL_PROTECTION_GRACE_PERIOD is obsolete ( #14798 )
2019-08-05 20:33:15 -05:00
Jason Smith
534c105a7a
Fix 16-bit range check in TMenuItem::action_edit ( #14834 )
2019-08-05 20:02:29 -05:00
Acenotass
4af9908764
Update M48 command in the status line ( #14816 )
2019-08-05 20:01:40 -05:00
Scott Lahteine
8f0aedeead
Reorder some language defines
2019-08-05 19:12:00 -05:00
Roxy-3D
6fdb0bec07
Resolve Kill pin & Max7219 Clock conflict on TREX-2+
2019-08-05 14:36:50 -05:00
teemuatlut
d4974ea719
TMC SPI Endstops and Improved Sensorless Homing ( #14044 )
2019-08-04 22:22:58 -05:00
Giuliano Zaro
d493cafc4a
Fix a memset pointer cast ( #14823 )
2019-08-04 22:06:36 -05:00
Scott Lahteine
4e58f9387a
Onboard SD for MKS Robin
...
In response to #9771
2019-08-04 21:17:45 -05:00
Scott Lahteine
2d98bb39bd
Edit STEPS_PER_MM integer only
2019-08-04 19:39:52 -05:00
Tim Moore
e3660bca25
Overlord printer thermistor ( #14815 )
2019-08-03 20:57:56 -05:00
George Fu
f89eb8bf35
Fysetc Cheetah updates ( #14800 )
2019-08-03 18:12:35 -05:00
Tanguy Pruvot
4bd1e55093
STM32F1: Init EEPROM SPI pin modes ( #14810 )
2019-08-03 18:11:06 -05:00
Scott Lahteine
52a7a8cb26
Fix HOST_PROMPT_SUPPORT without LCD
2019-08-02 11:35:04 -05:00
Scott Lahteine
18c9182903
Match up write_data signatures
2019-08-02 11:09:07 -05:00
Scott Lahteine
2e27e3ba04
Patch up Teensy 3.1/3.2 pins, tests
2019-08-02 10:01:55 -05:00
Ludy
337361d588
Update German language, (c) ( #14804 )
2019-08-02 09:21:28 -05:00
Scott Lahteine
8119e511a1
Patch some (c) messages
2019-08-02 07:47:33 -05:00
yangwenxiong
6132cf900b
STM32F4x SD-based settings storage ( #14808 )
2019-08-02 07:40:27 -05:00
Giuliano Zaro
21993b75f4
SAMD51 Servo class ( #14781 )
2019-08-02 07:37:41 -05:00
Scott Lahteine
e85eca2630
HAL cleanup, Teensy 3.1 platform
2019-08-02 07:22:26 -05:00
Tim Moore
940c59d9da
Overlord i2c LCD with LEDs and buzzer ( #14801 )
2019-08-02 06:19:45 -05:00
Scott Lahteine
e1942715ce
HAL_STM32F1_EEPROM_SIZE => HAL_EEPROM_SIZE
2019-08-02 06:18:36 -05:00
Scott Lahteine
ee5e46b46b
Patch PrintJobRecovery::filename
2019-08-02 05:21:55 -05:00
Scott Lahteine
fd945d1070
More generic EEPROM data array name
2019-08-02 04:40:34 -05:00
Tanguy Pruvot
3334163e73
STM32F1: Align SD EEPROM data for SDIO ( #14809 )
2019-08-02 04:12:46 -05:00
Scott Lahteine
70ce4f5b36
Move job recovery filename
2019-08-02 02:24:15 -05:00
Scott Lahteine
9ac348ef7b
SDPOWER => SDPOWER_PIN
2019-08-02 02:24:15 -05:00
Scott Lahteine
5e2582a31b
Comment spacing
2019-08-02 02:24:15 -05:00
mekius
7682751646
Fix HOME_BACKOFF_MM type ( #14805 )
2019-08-01 20:32:45 -05:00
Robby Candra
96a1c6540e
Use title case for menu items ( #14806 )
2019-08-01 20:31:58 -05:00
InsanityAutomation
f59a7e8b07
Print/display ABL current probe point ( #14788 )
2019-08-01 20:11:26 -05:00
Tim Moore
3765e67434
Dreammaker Overlord pins ( #14791 )
2019-07-31 21:15:36 -05:00
InsanityAutomation
6f8b8c394d
Homing backoff per-axis / delta Z ( #14789 )
2019-07-31 20:50:23 -05:00
Benjamin Reed
0c035c0a7a
Fix 'pause_menu_response' compile error ( #14792 )
2019-07-31 17:21:25 -05:00
Tanguy Pruvot
3db1a80b4c
Update French language ( #14787 )
2019-07-31 17:10:14 -05:00
Scott Lahteine
c2b319360d
Remove extra pragmas
2019-07-30 20:19:47 -05:00
Tanguy Pruvot
202d3ab3c9
Define STM32F1 GPIO for the preprocessor ( #14785 )
2019-07-30 18:58:03 -05:00
Eric Ptak
fdbc733376
Return 'false' on EEPROM connection fail ( #14776 )
2019-07-30 17:43:45 -05:00
Robby Candra
128eed6b57
Option to reverse select direction/buttons ( #14693 )
2019-07-30 17:42:57 -05:00
Gustavo Alvarez
27952648cf
Fix M122 column alignment ( #14779 )
2019-07-30 17:11:17 -05:00
Giuliano Zaro
eb08aeab7d
Update Italian language ( #14782 )
2019-07-30 17:09:01 -05:00
pinchies
d98b9d54f1
JGAurora A5S & A1 touch support ( #14768 )
2019-07-30 17:08:11 -05:00
Scott Lahteine
c1b99c43b6
[cron] Bump distribution date
2019-07-30 05:07:39 -05:00
InsanityAutomation
0b154c2d71
Enable runout sensor in EEPROM by default ( #14771 )
2019-07-30 05:01:56 -05:00
Scott Lahteine
bc58e678bd
More general FSMC display option
2019-07-30 04:25:55 -05:00
Scott Lahteine
c942ca130f
More general TOUCH_BUTTONS comment
2019-07-30 04:22:27 -05:00
Acenotass
659d06d9b9
M48 menu item, result to status ( #14772 )
2019-07-30 02:31:14 -05:00
rafaljot
e44fccf3d2
Add support for M575 ( #14757 )
2019-07-30 02:30:00 -05:00
MarcelMo
f8aa52346f
Configurable Z move distance ( #14593 )
2019-07-30 02:16:26 -05:00
Scott Lahteine
842466f4d9
Mixer patch, etc.
2019-07-29 22:20:28 -05:00
Scott Lahteine
1165c26ab4
Trailing whitespace
2019-07-29 19:46:54 -05:00
Scott Lahteine
eae543adf3
Apply HAS_SPI_LCD as needed
2019-07-29 18:55:05 -05:00
Scott Lahteine
8837cd3b53
[cron] Bump distribution date
2019-07-29 18:46:40 -05:00
Marcio Teixeira
eb7840dabb
Match select item to encoder direction ( #14673 )
2019-07-29 00:02:42 -05:00
Scott Lahteine
e5d73f68c8
HAL folder organization ( #14763 )
2019-07-28 23:55:24 -05:00
Marcio Teixeira
eefe3f595a
New options: Bootscreen as Info, game Easter-egg ( #13829 )
2019-07-28 22:47:20 -05:00
Scott Lahteine
180f9a4c22
Remove obsolete info menu includes
2019-07-28 20:20:33 -05:00
Ludy
c4bb458763
BUZZ cleanup ( #14760 )
2019-07-28 19:14:50 -05:00
Scott Lahteine
6b02b89ab4
Update serial sub-unit descriptions
2019-07-28 17:38:37 -05:00
mikeshub
1579091c20
PID loop improvements ( #14746 )
...
* Fix macro evaluation in `temperature.cpp`
* Improve bed PID, PID debug output
* Add min PID power define
2019-07-28 15:50:25 -05:00
thisiskeithb
e8e81d3609
Fix MKS Robin Lite pins include ( #14755 )
2019-07-28 14:56:05 -05:00
Giuliano Zaro
290466578f
Adafruit Grand Central M4 ( #14749 )
2019-07-28 14:48:29 -05:00
Marcio Teixeira
fec52e61ea
Use shared memory space for game data ( #14727 )
2019-07-28 01:44:16 -05:00
Scott Lahteine
17abb94532
Whitespace patch
2019-07-28 01:29:23 -05:00
Ludy
97e9c95f47
Fix & clean up ExtUI ( #14748 )
2019-07-27 22:44:05 -05:00
Eric Ptak
59e97e5e52
FYSETC Cheetah 1.2 ( #14723 )
2019-07-27 21:21:54 -05:00
InsanityAutomation
2351592abf
Overridable TMC serial pins, update TMC2209 docs ( #14751 )
2019-07-27 20:34:22 -05:00
thisiskeithb
d74efd9d46
MKS Robin Lite/Lite2 Board Support ( #14729 )
2019-07-27 04:43:37 -05:00
Marcio Teixeira
1c3df51f87
vsnprintf patch redux ( #14725 )
2019-07-27 04:34:49 -05:00
Bo Herrmannsen
bf610d87f7
Fix a bad MKS SGen-L pin ( #14735 )
2019-07-27 04:18:49 -05:00
Fourmi
d34364a086
Default TOUCH_MI_DEPLOY_XPOS to min X ( #14736 )
2019-07-26 21:57:13 -05:00
Ludy
ead6bb267d
Add Z3 SanityCheck, revert early sanity change ( #14717 )
2019-07-24 22:32:49 -05:00
Scott Lahteine
a3dc1e461b
Update M7219 comment, tweak parameter code
2019-07-24 21:09:51 -05:00
Chris Pepper
b6095fd084
Reduce default LPC176x ADC lowpass filtering
2019-07-25 00:40:51 +01:00
Scott Lahteine
1088846cae
Cosmetic updates from 14044
2019-07-24 01:52:36 -05:00
Scott Lahteine
05f4033a34
Prevent a name conflict in u8g impl file
2019-07-24 01:01:03 -05:00
Marcio Teixeira
585a8a96b4
Fix extraneous redefine of vsnprintf_P in Marduino.h ( #14712 )
2019-07-23 17:18:53 -05:00
Giuliano Zaro
7085781c71
Include configs in serial.h ( #14714 )
2019-07-23 16:40:54 -05:00
Marcio Teixeira
369fb2806d
Fix compilation warnings, errors ( #14704 )
2019-07-22 20:08:54 -05:00
Scott Lahteine
a589456a14
Tweak mark/range/quantity conditions
2019-07-22 07:16:42 -05:00
Scott Lahteine
601b2d9f51
Send slightly less data to Max7219
2019-07-22 07:16:42 -05:00
Scott Lahteine
79f49040f1
Patch some Max7219 comments
2019-07-22 07:14:07 -05:00
Scott Lahteine
5c3ec6306f
Max7219 side-by-side arrangement ( #14702 )
2019-07-22 05:22:21 -05:00
Scott Lahteine
a7c41d28af
Max7219 non-functional tweaks
2019-07-22 04:24:16 -05:00
Giuliano Zaro
1005f225f3
Remove unused defines, fix typo ( #14699 )
2019-07-21 21:44:03 -05:00
mikeshub
d9303b2137
Fix MAX6675_SEPARATE_SPI boot loop ( #14698 )
2019-07-21 21:36:00 -05:00
Scott Lahteine
f96d2a5b4a
Update pins_STEVAL.h
2019-07-21 21:25:14 -05:00
Tanguy Pruvot
dca0c3d02a
Fix SPI comments, clean up U20 pins ( #14700 )
2019-07-21 20:23:41 -05:00
Scott Lahteine
7501e40e0b
APB comment correction
2019-07-21 20:13:36 -05:00
InsanityAutomation
dc6fa04f68
Fix single nozzle temp change, do slower extra prime ( #14696 )
2019-07-21 19:33:37 -05:00
Tim Moore
e5aa453293
Add support for 2 Neopixel strips ( #14667 )
2019-07-20 23:14:09 -05:00
BigTreeTech
a38b9da672
STM32F1 SPI1 bugfix ( #14679 )
2019-07-20 20:35:41 -05:00
Scott Lahteine
93adb7e944
Some comment patches
2019-07-20 16:46:59 -05:00
InsanityAutomation
9cd66f6f77
Fix missing include & condition ( #14682 )
2019-07-20 01:55:34 -05:00
Tanguy Pruvot
977cfa4494
Fix a few recent (STM32F1 DOGM, SPI) warnings ( #14669 )
2019-07-20 01:54:01 -05:00
Ludy
39e1726498
Comments, includes ( #14671 )
2019-07-20 01:41:34 -05:00
Ludy
b714cfd4f0
MKS GEN v1.3/1.4 undef STAT_LED_*_PIN ( #14644 )
2019-07-19 06:12:57 -05:00
wookie666
00e2f6da8f
Improve magnetic dock switching toolhead ( #14663 )
2019-07-19 06:07:26 -05:00
Robby Candra
71d8c6f742
Fix LCD sanity check ( #14678 )
2019-07-19 05:53:36 -05:00
Scott Lahteine
fd2bc3a212
[cron] Bump distribution date
2019-07-19 00:00:09 -05:00
Scott Lahteine
4cc83b6330
Allow THERMAL_PROTECTION_GRACE_PERIOD override
...
Co-Authored-By: MarcelMo <marcelmo@users.noreply.github.com>
2019-07-18 23:38:03 -05:00
Scott Lahteine
1ea9a36d11
FYSETC BLTouch config and more ( #14668 )
2019-07-18 05:54:50 -05:00
Scott Lahteine
92e513e76e
Trailing whitespace
2019-07-18 05:51:36 -05:00
Msq001
6920b7fe91
BigTreeTech SKR E3 DIP ( #14638 )
2019-07-18 05:43:49 -05:00
Karl Andersson
d472934a70
FYSETC Mini 12864 for HAL_STM32 ( #14639 )
2019-07-18 05:42:16 -05:00
Scott Lahteine
ec13aa0dc1
Misc. whitespace
2019-07-18 05:13:55 -05:00
Scott Lahteine
3d153486da
Fysetc rename Part 2
2019-07-18 04:36:08 -05:00
Scott Lahteine
68108789d0
Add'l toolchange syncs
2019-07-18 02:44:21 -05:00
Scott Lahteine
fac0e63058
Clean up tool-change syncs ( #14666 )
2019-07-18 02:17:46 -05:00
Scott Lahteine
42b5ccafc9
Toss obsolete DEBUG_LEVELING_FEATURE tests
2019-07-17 20:26:48 -05:00
Marcio Teixeira
ca4d6f4470
Fix compile error (bad return type) ( #14660 )
2019-07-17 19:49:26 -05:00
thisiskeithb
522df57a45
Tevo Michelangelo configuration ( #14577 )
2019-07-17 19:47:14 -05:00
Robby Candra
c9aa68ef7a
Encoder direction: Wrangle, Revert select screen change ( #14628 )
2019-07-17 19:41:15 -05:00
Marcio Teixeira
839255eed4
Fix for M504 changing filament runout value ( #14661 )
...
Fixes #14476
2019-07-17 19:11:45 -05:00
Scott Lahteine
305f277843
Drop old includes in serial.h
2019-07-17 05:49:20 -05:00
Tanguy Pruvot
9dfa5ba3a5
XPT2046: Handle MKS touchscreen w/out PenIRQ pin ( #14640 )
2019-07-17 04:41:10 -05:00
Jason Smith
f2c5740d06
Add 'E' argument to G34 to allow stowing between probes ( #14533 )
...
- Use the return value from probe_pt during `G34`
Eliminate the assumption that probe_pt leaves current_position set to values relative to the probed points. This is not always true, depending on the raise_after argument.
- Add '`E`' argument to `G34` command allowing stowing between each probe.
2019-07-17 04:23:19 -05:00
Robby Candra
2c5436e315
Fix HOST_PROMPT_SUPPORT include in ExtUI API ( #14650 )
2019-07-17 04:23:19 -05:00
InsanityAutomation
b8cc61262f
Finish G12, update Nozzle::clean ( #14642 )
2019-07-17 04:23:19 -05:00
Marcio Teixeira
57ed063ba1
Fix unused variable warnings ( #14643 )
2019-07-17 03:16:10 -05:00
Scott Lahteine
06324df072
Apply some #ifndef
2019-07-17 03:14:44 -05:00
Marcio Teixeira
27c487bab7
Print progress enhancements ( #14647 )
2019-07-17 03:14:44 -05:00
Robby Candra
ebb1a7dc1f
Fix EXT_UI example onFilamentChange Parameter ( #14649 )
2019-07-17 03:05:23 -05:00
Scott Lahteine
5ccf8c2c33
Fix serial.h indents
2019-07-17 02:03:25 -05:00
Scott Lahteine
ef2a2eb984
Temp tweak
2019-07-17 02:03:25 -05:00
Ludy
abc9b52692
Update copyright in header, etc. ( #14645 )
2019-07-16 22:42:36 -05:00
Scott Lahteine
5535a047d7
[cron] Bump distribution date
2019-07-16 00:00:08 -05:00
Tanguy Pruvot
bae8d0a4bd
DOGM: Avoid white flash on TFT (re)init ( #14631 )
...
- Avoid white flash on TFT (re)init. Unlike Graphical LCD, the TFT init color may be full white if the backlight is on during init.
- Add a conditional for delayed backlight init which can be applied to any backlit display.
2019-07-15 17:36:16 -05:00
Scott Lahteine
93bc1b17f9
[cron] Bump distribution date
2019-07-15 00:00:08 -05:00
Simon Jouet
f0de56a797
ESP32 HAL - Dynamic ADC attenuation ( #14623 )
2019-07-14 23:32:48 -05:00
Tanguy Pruvot
81d629bc47
Robin & Longer3D SPI TFT driver ( #14595 )
2019-07-14 18:16:26 -05:00
Tanguy Pruvot
45bde333d5
Initial Longer3D LK1/2 (Alfawise U20/U20+/U30) support ( #14597 )
2019-07-14 18:05:24 -05:00
Jeonghwan Noh
475ccfad62
Oscar (by Thinknthings of Korea) board support ( #14574 )
2019-07-14 15:36:03 -05:00
Scott Lahteine
fdaa374490
Clean up pins self-checks
2019-07-14 15:34:14 -05:00
Scott Lahteine
77b4f23edc
Update pins comments
2019-07-14 15:19:22 -05:00
Scott Lahteine
d4be970c8b
Update DOGLCD conditions
2019-07-14 13:10:13 -05:00
Scott Lahteine
2d84bcb4cd
Simplify, update LCD sanity-check
2019-07-14 13:09:16 -05:00
Scott Lahteine
eaf1c0954e
Update some precompiler tests
2019-07-14 13:09:16 -05:00
InsanityAutomation
ce02c6cee2
Variable tool change purge ( #14618 )
2019-07-14 11:40:58 -05:00
Marcio Teixeira
cbe4bf2ba8
Fix process_injected_command undefined behavior ( #14602 )
2019-07-14 10:12:48 -05:00
Ringel
e139c1d9d9
Fix ESP32 i2s stream, add PWM to extended pins ( #14592 )
2019-07-14 10:08:14 -05:00
Marcio Teixeira
a49478cefa
Fix STATUS_MESSAGE_SCROLLING in LIGHTWEIGHT_UI ( #14603 )
2019-07-14 09:39:03 -05:00
InsanityAutomation
d2f20803ba
Allow nozzle clean with limited Axis ( #14619 )
2019-07-14 06:58:53 -05:00
Ludy
6dcb85927a
Update German language, &c. ( #14613 )
2019-07-14 04:34:55 -05:00
Robby Candra
e96468566d
Fix Z_PROBE_END_SCRIPT in ABL ( #14621 )
2019-07-14 04:28:38 -05:00
Scott Lahteine
a85cd042d8
[cron] Bump distribution date
2019-07-14 00:00:09 -05:00
Scott Lahteine
91bb0f5439
[cron] Bump distribution date
2019-07-13 00:00:09 -05:00
Scott Lahteine
b2b7c583eb
Pins cleanup
2019-07-12 23:07:52 -05:00
Karl Andersson
82cafc9b19
pins_ARMED overrides STM32 defines ( #14587 )
2019-07-12 06:06:04 -05:00
Scott Lahteine
d3add3c34f
Init servo macro, j/b
2019-07-12 04:53:50 -05:00
InsanityAutomation
f1eaed7e98
Only init servo pins used for servos ( #14589 )
2019-07-12 04:30:15 -05:00
scotthsl
19b24a349c
Fix M412 without HOST_ACTION_COMMANDS ( #14591 )
2019-07-12 04:23:33 -05:00
Scott Lahteine
89964ec30d
[cron] Bump distribution date
2019-07-12 00:00:08 -05:00
Giuliano Zaro
cd36809c06
Fix STM32F7 compile error ( #14583 )
2019-07-11 15:23:53 -05:00
Scott Lahteine
3cd9a92dcc
Use REVERSE_ENCODER_DIRECTION in do_select_screen
2019-07-11 15:17:26 -05:00
Scott Lahteine
80c6f98d2f
Fix nested _draw_chamber_status
...
Co-Authored-By: alexscarbro <alexscarbro@users.noreply.github.com>
2019-07-11 14:51:26 -05:00
Scott Lahteine
b0d8ba3894
Fix ANIM_CHAMBER
...
Co-Authored-By: alexscarbro <alexscarbro@users.noreply.github.com>
2019-07-11 14:36:02 -05:00
Ludy
70586d3a6c
Update (c) comments ( #14584 )
2019-07-11 13:48:15 -05:00
Pavel4e5
8babf55b18
Init ADC keypad analog input ( #14585 )
2019-07-11 13:47:41 -05:00
Scott Lahteine
948c3f580b
Clean up some LCD conditions
2019-07-11 06:11:19 -05:00
Scott Lahteine
3218c4b33f
Shorten some config descriptions
2019-07-11 05:45:27 -05:00
Scott Lahteine
179095c387
Pins cleanup
2019-07-11 05:29:24 -05:00
thisiskeithb
42be684e69
Wanhao Duplicator i3 Mini support ( #14559 )
2019-07-11 04:36:51 -05:00
Scott Lahteine
340d827dc1
Fix mega/ subfolder pins
...
Followup to #14573
2019-07-11 02:59:02 -05:00
Scott Lahteine
7de605c5c3
Move pins files to subfolders #14573
2019-07-11 02:32:24 -05:00
Scott Lahteine
e5a5273edb
[cron] Bump distribution date
2019-07-11 00:00:10 -05:00
Scott Lahteine
98c6c6f1aa
Combine STM32F4 and STM32F7 ( #14566 )
...
* Serial assert (needs work)
* Bring STM32F4/F7 together
* Tweaks to STM32 headers
* More general 'stm32_timer_t'
* Move vsnprintf_P to Marduino.h
2019-07-10 22:05:34 -05:00
Giuliano Zaro
caa87d5fe1
SD2Card cleanup ( #14571 )
2019-07-10 22:04:16 -05:00
Scott Lahteine
ad1c061e7b
Bring STM32F4/F7 together
2019-07-10 07:07:04 -05:00
Scott Lahteine
4e479caf61
Fix mis-use of LIMIT
2019-07-10 07:07:04 -05:00
Scott Lahteine
cf9ac4c847
Move vsnprintf_P to Marduino.h
2019-07-10 07:07:04 -05:00
Scott Lahteine
f7de453da8
More general 'stm32_timer_t'
2019-07-10 07:07:04 -05:00
Scott Lahteine
828cc71847
Tweaks to STM32 headers
2019-07-10 07:07:04 -05:00
Scott Lahteine
94f2e82897
Serial assert (needs work)
2019-07-10 07:07:04 -05:00
Tanguy Pruvot
881e5a48bc
Fix M43 warning, XL density timers ( #14555 )
2019-07-10 06:30:57 -05:00
Scott Lahteine
44c8f29e47
More board name cleanup
2019-07-10 05:54:15 -05:00
Scott Lahteine
ed0e6afacb
Apply LIMIT macro
2019-07-10 03:35:39 -05:00
Scott Lahteine
9817976375
[cron] Bump distribution date
2019-07-10 00:00:08 -05:00
Ludy
a7bb1fc322
Fix Dual X,Y,Z UART pins in relation to TMC2208/9 ( #14554 )
2019-07-09 22:52:48 -05:00
Scott Lahteine
f990ebfb09
Tweak STM32F4/7 eeprom emulation ( #14563 )
2019-07-09 22:49:58 -05:00
Scott Lahteine
056efaba91
Clean up section comments
2019-07-09 22:34:21 -05:00
Scott Lahteine
5519054f50
Improve BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE ( #13740 )
2019-07-09 21:35:07 -05:00
Scott Lahteine
3ae3bf5d33
Get E2END from pins, fix Linux buffer
2019-07-09 21:32:13 -05:00
Scott Lahteine
01e8813286
EEPROM_EMULATED_WITH_SRAM => SRAM_EEPROM_EMULATION
2019-07-09 21:31:33 -05:00
Scott Lahteine
cb60001784
Clean up BOARD_NAME in pins
2019-07-09 21:31:06 -05:00
Scott Lahteine
c0e917ea83
DUE/usb should use platform min/max
2019-07-09 19:31:07 -05:00
gmarsh
ab99a80793
GMARSH X6 board support ( #14550 )
2019-07-09 00:30:08 -05:00
Scott Lahteine
84d0bc5c17
OLED LCD section
2019-07-08 23:58:04 -05:00
Scott Lahteine
a2ba0aaaac
HAL include and other adjustments ( #14525 )
2019-07-08 23:42:29 -05:00
Ludy
ba22857f93
Allow override of TMC_SW_* pins, etc.
2019-07-08 23:13:28 -05:00
Scott Lahteine
1a349c7522
Add HAS_TMC220x
2019-07-08 23:07:42 -05:00
Scott Lahteine
9821ec2afd
Fix SKR Pro pins, STM32F1/4 sanity-check
...
Co-Authored-By: Msq001 <msq001@users.noreply.github.com>
2019-07-08 23:07:42 -05:00
Scott Lahteine
2b1c2a0db9
[cron] Bump distribution date
2019-07-08 00:00:11 -05:00
Tim Moore
8b81c0e88f
LEDs to default on print completion ( #14535 )
2019-07-07 07:17:08 -05:00
Scott Lahteine
e7307af42d
[cron] Bump distribution date
2019-07-07 00:09:53 -05:00
Msq001
439e28783b
BigTree SKR Pro V1.1 board support ( #14523 )
2019-07-06 21:52:17 -05:00
Ludy
3a75342508
Allow override of TMC_SW_* pins ( #14528 )
2019-07-06 21:25:48 -05:00
igorepi
c1bb3278d4
Fix Russian grammar ( #14527 )
2019-07-06 21:24:57 -05:00
Ludy
c0497234b9
SanityCheck Biqu SKR 1.1 => BigTree SKR 1.1 ( #14526 )
2019-07-06 21:24:10 -05:00
Roxy-3D
cdf4ed87a1
Add back required precision for off printer mesh saves
2019-07-06 21:01:56 -05:00
Scott Lahteine
8916acf083
[cron] Bump distribution date
2019-07-06 00:00:09 -05:00
Tanguy Pruvot
8873c583d3
Prevent extra settings.load on boot ( #14499 )
2019-07-05 22:25:59 -05:00
Bob Kuhn
dc02d0720d
Pins Debugging for STM32 — NEEDS TESTING ( #14309 )
2019-07-05 22:08:06 -05:00
Tanguy Pruvot
052aa23efe
STM32F1: ignore output check for analogWrite() ( #14498 )
2019-07-05 21:13:32 -05:00
Alexander Amelkin
7a42132002
GTM32 Pro pins updates ( #14505 )
2019-07-05 21:09:17 -05:00
thisiskeithb
10a71e332d
Biqu SKR 1.1 => BigTree SKR 1.1 ( #14514 )
2019-07-05 20:57:08 -05:00
Vanessa Dannenberg
4fa8053638
RPW-Ultra thermistor table ( #14517 )
2019-07-05 20:37:05 -05:00
Ludy
a210f80adc
Sanity-check for CASE_LIGHT_PIN ( #14518 )
2019-07-05 20:18:43 -05:00
Scott Lahteine
253d0f9671
Some MIN/MAX rely on core
2019-07-05 20:07:48 -05:00
Scott Lahteine
535b70057e
Oops. Don't undef MIN/MAX
2019-07-05 18:42:21 -05:00
Scott Lahteine
021c4ccf5f
Fix SpindleLaser class
...
Fix #14465
2019-07-05 18:39:40 -05:00
Scott Lahteine
fe02241044
NONE on combined options
2019-07-05 18:20:24 -05:00
Scott Lahteine
67e0238c89
Reduce type warnings
2019-07-05 18:20:24 -05:00
Scott Lahteine
750a16ad38
Fix MIN/MAX function collision with macros
2019-07-05 18:14:02 -05:00
Scott Lahteine
b6546ea33a
Add include guards to some headers
2019-07-05 04:02:08 -05:00
Scott Lahteine
8ff49d6b46
[cron] Bump distribution date
2019-07-05 03:48:50 -05:00
Tanguy Pruvot
31450d9d6b
M43: spi channels are not pins ( #14502 )
2019-07-05 02:03:01 -05:00
Roman Moravčík
9736a21de2
Update Slovak language ( #14503 )
2019-07-05 02:02:20 -05:00
Giuliano Zaro
2bf11da5ab
Fix pin based on SOFT_SPI_CS ( #14504 )
2019-07-05 02:01:52 -05:00
Giuliano Zaro
66e16af29d
SPI defines cleanup ( #14506 )
2019-07-05 01:59:37 -05:00
Tim Moore
eb6dec03bd
Simplify power supply naming logic ( #14488 )
...
Co-Authored-By: Tim Moore <tim.moore@lightbend.com>
Co-Authored-By: AnHardt <github@kitelab.de>
2019-07-05 01:58:34 -05:00
Scott Lahteine
44e4f853c8
Patch M_PI in Marduino.h
2019-07-04 19:58:08 -05:00
Scott Lahteine
c6e6365e15
[cron] Bump distribution date
2019-07-04 15:56:02 -05:00
Roxy-3D
41b7f16ab8
Fix grammar of comment for G29 T command
2019-07-03 19:26:43 -05:00
Scott Lahteine
de462f2b8a
Revert "Sort out settings.load with SD EEPROM emulation ( #14458 )"
...
This reverts commit 108d0df565
2019-07-03 19:11:30 -05:00
Giuliano Zaro
b7573c6e69
Remove unused WRITE_VAR, etc. ( #14493 )
2019-07-03 17:52:30 -05:00
GMagician
8be146642f
Unused SPI PIN definitions
2019-07-03 17:49:55 -05:00
Scott Lahteine
6a2a10a154
Bump distribution date
2019-07-03 03:11:12 -05:00
Scott Lahteine
371969b531
Remove deprecated SCARA option
2019-07-03 02:43:33 -05:00
Scott Lahteine
ae9232962e
Use heater index defines
2019-07-02 23:29:43 -05:00
Scott Lahteine
f7eeae8424
Indent a line
2019-07-02 21:34:40 -05:00
teemuatlut
8aad29fb6e
Fix Prusa chopper timing preset
2019-07-02 20:51:33 -05:00
Scott Lahteine
1620738701
Home dir use < or >
2019-07-02 20:51:33 -05:00
Scott Lahteine
0f79fb9821
Generic stop pins (presume one endstop per axis end)
2019-07-02 20:30:26 -05:00
Scott Lahteine
ce2b4bc20c
Conditionals tweak
2019-07-02 20:30:26 -05:00
Ludy
3358caed14
Update German/Italian language ( #14482 )
2019-07-02 19:25:20 -05:00
Scott Lahteine
720bc7c00b
Named indices for Temperature class ( #14479 )
2019-07-02 08:39:55 -05:00
Scott Lahteine
274809aced
Bump distribution date
2019-07-02 05:54:06 -05:00
Scott Lahteine
ff55088491
Fix Malyan LCD warnings
2019-07-02 04:36:02 -05:00
Scott Lahteine
d4415dcf59
Fix analogWrite ambiguity
2019-07-02 04:36:02 -05:00
thisiskeithb
c6f74ba887
TH3D EZBoard v1.0 ( #14473 )
2019-07-02 03:12:32 -05:00
Marcio Teixeira
16409eb233
Suppress more UNUSED warnings ( #14466 )
2019-07-01 20:42:38 -05:00
GMagician
82ecaa767e
Remove unused code in M100
...
queue.buffer is in bss area, start_free_memory starts from heap then above of bss
2019-07-01 20:38:49 -05:00
GMagician
54358fbe28
Update Italian language
2019-07-01 20:37:59 -05:00
Scott Lahteine
c28e08c849
Fix mintemp/maxtemp monitoring for thermocouples
2019-07-01 10:24:53 -05:00
Scott Lahteine
de8fee6aea
Clarify ExtUI command injection
2019-07-01 09:23:00 -05:00
Scott Lahteine
448d482d3c
Update motherboard numbering ( #14460 )
2019-07-01 09:10:55 -05:00
Tanguy Pruvot
108d0df565
Sort out settings.load with SD EEPROM emulation ( #14458 )
2019-07-01 09:10:17 -05:00
Scott Lahteine
18e396b102
Update motherboard numbering
2019-07-01 07:06:38 -05:00
Msq001
c9be936d4a
BigTreeTech SKR Mini E3 ( #14457 )
2019-07-01 07:06:25 -05:00
Aliaksei Kvitsinski
2f932a11b3
Park heads with electromagnet ( #14023 )
2019-07-01 05:55:23 -05:00
Tanguy Pruvot
ca7f56e60b
Add 0.025mm Manual Move for Z ( #14456 )
2019-07-01 03:17:50 -05:00
Scott Lahteine
56c4a96180
Bump distribution date
2019-07-01 01:21:31 -05:00
thisiskeithb
4b9f6d531b
Add links to Junction Deviation heading ( #14272 )
2019-07-01 01:17:53 -05:00
Scott Lahteine
ced30b1054
Update ExtUI sanity checks
2019-07-01 00:50:22 -05:00
Scott Lahteine
10b85be405
status_message_level => alert_level
2019-07-01 00:47:08 -05:00
Tanguy Pruvot
24655a6bf3
Touch-MI Menu and Manual Deploy option ( #14290 )
2019-06-30 23:55:27 -05:00
Ludy
dab2f0c89c
Mask unused var, update (c) comments ( #14455 )
2019-06-30 22:29:33 -05:00
Ludy
0ca64a0ea3
Fix compile error with Z_PROBE_END_SCRIPT ( #14447 )
2019-06-29 23:20:49 -05:00
Scott Lahteine
d16954dc88
Make KEEPALIVE_STATE a scoped auto-restore ( #14446 )
2019-06-29 22:49:50 -05:00
Tanguy Pruvot
19aafb9050
Fix STM32F1 motor shocks (stepper timer issue) ( #14030 )
2019-06-29 04:39:38 -05:00
Scott Lahteine
3ea073ace6
Slight reduction in serial.h file size
2019-06-29 04:04:25 -05:00
thisiskeithb
6978bb5ea5
Fix MKS Robin Nano FAN_PIN ( #14444 )
2019-06-29 02:11:26 -05:00
th33xitus
fe2c710b39
Fix for Arduino Due + 12864 Full Graphic Display ( #14181 )
2019-06-29 01:37:02 -05:00
Phr3d13
34c8204d25
STM32F1 SD EEPROM Emulation Fixes ( #14261 )
2019-06-29 01:34:54 -05:00
Marcio Teixeira
e6cf7860e8
Improve ExtUI, fix compiler errors, warnings ( #14441 )
2019-06-29 00:23:57 -05:00
Scott Lahteine
e89a47c8b5
Bump distribution date
2019-06-29 00:13:59 -05:00
Scott Lahteine
b615b492ba
Update some HAL comments
2019-06-28 23:10:40 -05:00
Scott Lahteine
49027721e9
Clean up some pinsDebug headers
2019-06-28 22:50:56 -05:00
Scott Lahteine
c9a8db33c3
Fix scaledFanSpeed
2019-06-28 21:24:47 -05:00
Darsey Litzenberger
946f6bdeaa
Disable leveling during G12 ( #14385 )
2019-06-28 19:23:42 -05:00
Scott Lahteine
b3f42d2519
Update SD host config comment
2019-06-28 19:13:27 -05:00
Roman Moravčík
77c67085bf
Update Slovak language ( #14433 )
2019-06-28 18:57:43 -05:00
Giuliano Zaro
9174aa376f
Update Italian language ( #14440 )
2019-06-28 18:56:10 -05:00
Giuliano Zaro
07c998afe5
Fix E2END on RURAMPS ( #14438 )
2019-06-28 18:55:17 -05:00
Giuliano Zaro
a9445d557e
Remove extra #if ( #14439 )
2019-06-28 18:54:22 -05:00
Scott Lahteine
4d5a1984e2
Simplified fan handling code
2019-06-28 18:50:32 -05:00
Scott Lahteine
a8d68b7c8a
Common method for scaled fan speed
2019-06-28 15:34:17 -05:00
Scott Lahteine
1a09c4dea5
Cutter class followup
2019-06-28 15:34:17 -05:00
Scott Lahteine
9da02d2114
Help syntax highlighting (Sublime, et. al.)
2019-06-28 15:04:17 -05:00
Martin
ae9afb333e
Remove fwretract planner.synchronize calls ( #14432 )
2019-06-28 13:33:47 -05:00
Scott Lahteine
93cd66ac11
Tweaky change from (C) to (c)
2019-06-27 23:58:16 -05:00
Scott Lahteine
d7d80418ae
Singleton for cutting tools ( #14429 )
2019-06-27 23:06:49 -05:00
Scott Lahteine
2fde1475cb
Allow SD card sharing on SKR Mini
2019-06-27 22:30:13 -05:00
Scott Lahteine
7e16835c83
Use LCD conditionals in pins files ( #14428 )
2019-06-27 22:14:43 -05:00
thisiskeithb
8b63e3701f
MKS Robin Nano board support ( #14363 )
2019-06-27 21:33:41 -05:00
Tim Moore
81209f5310
'M105 R' to report redundant temp sensor ( #14324 )
2019-06-27 21:29:52 -05:00
Scott Lahteine
6664b90bbb
Init servo pins in HAL_init ( #14425 )
2019-06-27 16:29:17 -05:00
Tim Moore
8ce84fa44f
Add temperature-based auto power options ( #14397 )
2019-06-27 16:28:07 -05:00
Scott Lahteine
00cc1079af
Add missing chamber auto fan options
2019-06-27 16:05:47 -05:00
InsanityAutomation
ce656e2a26
Update G-code injection, sub-commands ( #14418 )
2019-06-27 15:07:45 -05:00
InsanityAutomation
b961251899
Add Z_PROBE_END_SCRIPT to UBL ( #14419 )
2019-06-27 13:00:55 -05:00
Scott Lahteine
2580104c8b
Revert recent probe changes
...
- Revert "Fix FIX_MOUNTED_PROBE compile error (#14393 )"
- Revert "Fix G28 with non-BLTouch probes (#14381 )"
- Revert "Fix BLTOUCH deploy/stow in HS mode (#14352 )"
- Revert "Apply needed BLTouch patch (#14233 )"
Co-Authored-By: AnHardt <github@kitelab.de>
2019-06-26 05:33:43 -05:00
thisiskeithb
cd302f9464
Add MKS SGen-L Board ( #14411 )
2019-06-26 04:17:06 -05:00
Andy Shaw
064177154c
Update SD card connection / sharing options ( #14325 )
2019-06-26 03:55:57 -05:00
BigIronGuru
9f136a7c67
Low-priority homing in G34 ( #14391 )
2019-06-26 03:52:01 -05:00
Scott Lahteine
49627069a5
Shorthand for home-after-deactivate
2019-06-26 03:47:55 -05:00
J.C. Nelson
30a3db4f22
Fix Malyan M200 config and protocol ( #14394 )
2019-06-26 03:35:52 -05:00
oechslein
8c55bd5451
Update "StallGuard threshold" heading ( #14395 )
2019-06-26 03:33:07 -05:00
Scott Lahteine
98f3a3d5c3
Bump distribution date
2019-06-26 03:15:31 -05:00
Msq001
e3846ec7a1
SKR mini can use 128x64 LCD ( #14388 )
2019-06-26 01:12:41 -05:00
Eric Ptak
8934b32f1b
Fysetc AIO II / Cheetah STM32F1 ( #14407 )
2019-06-26 00:40:29 -05:00
Marcio Teixeira
8e23e9b16c
Fix FIX_MOUNTED_PROBE compile error ( #14393 )
2019-06-25 04:55:29 -05:00
Tanguy Pruvot
07dac315a9
Up-to-date STM32F1 README ( #14386 )
2019-06-24 03:44:26 -05:00
thisiskeithb
a4aa3621c0
MKS Robin Mini Board Support ( #14366 )
2019-06-24 03:42:22 -05:00
Scott Lahteine
cf762d2c73
Fix enqueueing bug
2019-06-23 23:02:07 -05:00
BigIronGuru
12d21e642f
Update G34 for non-BLTouch probes ( #14380 )
2019-06-23 20:55:43 -05:00
BigIronGuru
5986194c36
Fix G28 with non-BLTouch probes ( #14381 )
2019-06-23 20:53:05 -05:00
InsanityAutomation
aa0383a83b
Enhance IDEX toolchange auto-return w/ no park, full control ( #14117 )
2019-06-23 20:00:48 -05:00
Scott Lahteine
3d9d72e8db
Include order, spacing, etc.
2019-06-23 04:02:52 -05:00
mikeshub
1b1a4677f5
Fix LCD.h compilation error ( #14377 )
2019-06-22 21:08:30 -05:00
sjasonsmith
07b41a8c3f
Include SOLENOID_PROBE in leveling report ( #14344 )
2019-06-22 17:54:37 -05:00
thisiskeithb
71b2700c3c
Anycubic Trigorilla 1.4 Rev. 1.1 ( #14357 )
2019-06-22 17:53:45 -05:00
BigIronGuru
f5afaaef5b
Fix probe.cpp warning ( #14367 )
2019-06-22 17:27:33 -05:00
BigIronGuru
def4bb987d
Reset, stow BLTouch before mode change ( #14368 )
2019-06-22 17:26:02 -05:00
Scott Lahteine
78557076ff
Add planner.synchronize to UBL G29
2019-06-22 17:23:29 -05:00
BigIronGuru
6578aa4e1b
Apply minimum timing to BLTouch commands ( #14369 )
2019-06-22 17:20:19 -05:00
teemuatlut
2247bf1ba5
Add missing dedge init for TMC2209 ( #14370 )
2019-06-22 17:00:15 -05:00
mikeshub
1db7013e3b
Fix and improve PID loops ( #14373 )
...
- Windup guarding was missing. The kludge in place of windup guard is removed. D term filter calculations are simplified to require fewer `float` calculations. Sign change for D term output to make debugging output clearer.
- Use "no overshoot" for bed PID tuning.
2019-06-22 16:52:56 -05:00
Scott Lahteine
17778d1c2a
Fix M916-918 subcommands
2019-06-22 16:18:42 -05:00
Tanguy Pruvot
be69ec5b32
Fix PLR/M43 warnings ( #14333 )
2019-06-22 00:48:47 -05:00
BigIronGuru
9c83135d40
Only home Z at the end of G34 ( #14353 )
2019-06-22 00:43:33 -05:00
InsanityAutomation
5df051fdee
Fix Start SD Print bug ( #14354 )
...
Followup to the G-code parser injection update.
2019-06-22 00:37:21 -05:00
LinFor
0f6f5132c1
Fix variable conflict in ok_to_send ( #14351 )
2019-06-21 19:04:30 -05:00
MrMabulous
c41b005f33
Add Extra Probing option, discarding outliers ( #14338 )
2019-06-21 19:02:26 -05:00
BigIronGuru
8f99d45045
Fix BLTOUCH deploy/stow in HS mode ( #14352 )
2019-06-21 18:55:27 -05:00
Tobias Frost
eeaef2410a
Support DGUS Display with DWIN OS ( #13253 )
2019-06-21 04:47:23 -05:00
Scott Lahteine
bb0bcbaec0
Suppress compiler warning
2019-06-21 02:20:40 -05:00
Tanguy Pruvot
52383633e7
STM32F1: M43 PINS_DEBUGGING ( #14072 )
2019-06-21 01:20:17 -05:00
Karl Andersson
81d550754a
Fix "UNUSED" redefined warning on HAL_STM32 ( #14342 )
2019-06-21 00:48:10 -05:00
Karl Andersson
4b365552db
Fix Marduino SBI/CBI redefine ( #14341 )
2019-06-21 00:46:23 -05:00
InsanityAutomation
a9acd2f497
G34 configurable angle limit ( #14321 )
2019-06-20 21:18:36 -05:00
Scott Lahteine
a31cb910f5
Tweak some config spacing
2019-06-20 21:08:47 -05:00
Marcio Teixeira
49ea1c635a
Fix missing dependencies ( #14339 )
2019-06-20 16:37:20 -05:00
Scott Lahteine
4df4c47994
Add TMC2209 support ( #14249 )
2019-06-20 15:47:50 -05:00
Tanguy Pruvot
ed0c70f0a0
SKRmini followup - Fysetc config updates ( #14327 )
2019-06-20 05:49:27 -05:00
Scott Lahteine
dd06017f64
Bring configs up to date
2019-06-19 01:03:51 -05:00
Scott Lahteine
9131b11944
Games in Info menu, if enabled
2019-06-19 00:03:32 -05:00
Scott Lahteine
4c872a01f2
G-code queue singleton, front injection ( #14236 )
2019-06-19 00:00:19 -05:00
Tanguy Pruvot
75aeb41ab7
SKRmini support for Fysetc Mini Panel ( #14319 )
2019-06-18 19:34:16 -05:00
InsanityAutomation
bf64dd4db6
Improve G34, M422 (Z alignment) ( #14142 )
2019-06-18 07:02:18 -05:00
Tanguy Pruvot
391250b04f
STM32F1: Don't toggle EEPROM SPI SS ( #14299 )
2019-06-18 06:48:20 -05:00
Giuliano Zaro
27d30c1be8
Update Italian language ( #14302 )
2019-06-18 06:45:34 -05:00
Scott Lahteine
3f6424076b
Update M524 description
2019-06-18 05:04:55 -05:00
Scott Lahteine
cf3631226b
Document G-code M290
2019-06-18 04:53:31 -05:00
Scott Lahteine
c12b6ba760
Add Dagoma F5 to Makefile
2019-06-18 04:40:00 -05:00
3DSmitty
5b13abcacb
Fix SPI_SD Outside of HAL_STM32F1 ( #14306 )
2019-06-18 02:38:18 -05:00
Bob Kuhn
089d12df16
Fix duplicate board IDs ( #14310 )
2019-06-18 02:26:13 -05:00
Ludy
2290b269dc
Unused variable ( #14301 )
2019-06-18 00:15:41 -05:00
Scott Lahteine
6b2d42434c
Wrap main menu external declarations
2019-06-17 21:44:56 -05:00
Scott Lahteine
aacb904e1f
Adjust some config comments
2019-06-17 20:22:07 -05:00
Scott Lahteine
651f3eeed0
Clean up trailing whitespace
2019-06-17 20:22:07 -05:00
Ludy
35aabd1834
Fix Spindle/Laser compile error ( #14312 )
2019-06-17 18:38:43 -05:00
Scott Lahteine
21f377d94a
STM32F1: various small changes ( #14313 )
...
- init the led pin as output (like other HALs)
- reduce sdio dma priority to normal.. highest is never the best...
- allow fsmc only on compatible STM32F1 (like HAL fsmc)
- fsmc: remove an useless C style cast
2019-06-17 17:48:50 -05:00
sensei73
ce5f94c8f4
Fix Touch-MI sanity checks ( #14316 )
2019-06-17 17:46:14 -05:00
Tanguy Pruvot
287df7a61f
STM32F1: various small changes
...
- init the led pin as output (like other HALs)
- reduce sdio dma priority to normal.. highest is never the best...
- allow fsmc only on compatible STM32F1 (like HAL fsmc)
- fsmc: remove an useless C style cast
2019-06-17 10:27:30 +02:00
3DSmitty
66d51272af
Fix SPI, SD for BIGTREETECH SKR Mini ( #14287 )
2019-06-15 18:12:05 -05:00
Scott Lahteine
903863dcb6
Suppress some warnings
2019-06-15 17:47:59 -05:00
Scott Lahteine
eb1c9113c2
Try to init SD with no detect pin
2019-06-15 15:36:48 -05:00
Scott Lahteine
9a56a88200
Use OUT_WRITE in SPI pin init
2019-06-15 15:36:43 -05:00
Scott Lahteine
24c23b60fa
Use lambda, fix wrap pointer
2019-06-15 15:36:42 -05:00
pinchies
3021097888
Add JGAurora A5S and A1 (STM32F103ZET6) ( #14291 )
...
- Now compiles and works correctly with changes to HAL timers and watchdog.
- Does NOT include awesome work on touch screen function.
- Does have working LCD and SD-based EEPROM.
2019-06-15 14:28:22 -05:00
Ludy
6fb3db1633
Update German language ( #14294 )
2019-06-15 14:26:14 -05:00
Scott Lahteine
a17f057daa
Fix word wrapping on select screens
2019-06-15 14:06:23 -05:00
Tanguy Pruvot
f2cfa408b7
Touch-MI probe by hotends.fr ( #14101 )
...
A simple Z probe using a magnet to deploy a probe. See https://youtu.be/E7Ik9PbKPl0 for the sensor description...
2019-06-14 22:19:48 -05:00
Scott Lahteine
26de051e92
HAL SPI pin init cleanup
2019-06-14 20:17:25 -05:00
Scott Lahteine
50c9b33ed7
!ENABLED => DISABLED
2019-06-14 00:44:49 -05:00
teemuatlut
29afd11cbf
Updates for TMC2660 init ( #14245 )
2019-06-13 23:16:10 -05:00
Scott Lahteine
dfdbd1e75f
Use TEST macro where possible
2019-06-13 20:59:12 -05:00
teemuatlut
12a270fd29
Fix TMC5160 and TMC2160 PWMCONF init
2019-06-13 20:57:12 -05:00
Scott Lahteine
fc73a8b004
Add AXIS_HAS_SQUARE_WAVE shorthand
2019-06-13 20:57:12 -05:00
mb300sd
bf8bfb5c66
Add Coolant Control M7/M8/M9 ( #10745 )
2019-06-13 18:43:11 -05:00
Aliaksei Kvitsinski
648a91bce8
Support for Z-Bold board ( #14024 )
2019-06-13 03:21:18 -05:00
MastS
18904c42f6
Fysetc LCD backlight timeout ( #14265 )
2019-06-12 21:59:39 -05:00
Scott Lahteine
bc2ff9b41f
Fix M605 bugs
...
Fixes #14191
2019-06-12 20:01:08 -05:00
Scott Lahteine
f7792c0192
Group manual move options
2019-06-12 19:49:18 -05:00
Tanguy Pruvot
7d1eafc80a
STM32F1: C++14 for static_assert, etc. ( #14278 )
2019-06-12 18:44:32 -05:00
Msq001
26e7e33698
Fix bug in STM32F1 WRITE macro ( #14275 )
2019-06-12 06:30:24 -05:00
Scott Lahteine
04715e04ee
Minor M100 cleanup
2019-06-12 06:14:40 -05:00
Scott Lahteine
356410dcfc
Move crc16 function to libs
2019-06-12 06:14:39 -05:00
Scott Lahteine
2a96d4e23a
Move number-to-string functions to libs
2019-06-11 07:51:47 -05:00
Scott Lahteine
1ef95013f0
Update Marlin.cpp includes, defines
2019-06-11 07:30:51 -05:00
Kaushik Vemparala
c88d9ae282
Option to leave heaters set on SD abort ( #14251 )
2019-06-10 23:57:55 -05:00
Tanguy Pruvot
8cf5504a34
Redundant but faster recovery.enabled test ( #14175 )
2019-06-10 23:33:35 -05:00
Tanguy Pruvot
c3e5225531
Add SPI EEPROM to STM32F1 ( #14239 )
2019-06-10 23:30:23 -05:00
felixstorm
9439fab7fd
Fix ESP32 servos, platformio.ini, etc. ( #14247 )
2019-06-10 23:22:19 -05:00
yangwenxiong
b0a4ea79b8
BigTreeTech SKR Mini v1.1 ( #14041 )
2019-06-10 21:10:51 -05:00
Robby Candra
f30b89953d
runout.distance_mm LCD edit item ( #14066 )
2019-06-10 20:18:06 -05:00
mikeshub
a3f034b95e
FFCP updates. Update XY soft endstops on tool_change ( #14125 )
2019-06-10 18:01:42 -05:00
InsanityAutomation
b7eeb5b13b
Move BLTouch options to adv config ( #14131 )
...
Plus other BLTouch and menu enhancements.
2019-06-10 17:46:42 -05:00
Scott Lahteine
0ca2073625
ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED => SD_ABORT_ON_ENDSTOP_HIT
2019-06-10 17:28:35 -05:00
thisiskeithb
662e7da8a4
Fix USE_BIG_EDIT_FONT bug ( #14252 )
2019-06-09 19:37:14 -05:00
teemuatlut
cccc51ee0e
TMC Square Wave Stepping mode ( #14195 )
2019-06-09 05:08:05 -05:00
Scott Lahteine
80ce0d2bdb
Whitespace cleanup
2019-06-08 06:40:44 -05:00
Scott Lahteine
455f0de817
Undefine sanity check tests when done
2019-06-08 06:29:28 -05:00
Robby Candra
7e07a3888b
Fix PLR Z bug affecting Cartesians ( #14230 )
2019-06-08 05:27:58 -05:00
Robby Candra
5ca8d51e12
Ability to insert G-code in front of queue ( #14229 )
2019-06-08 05:23:53 -05:00
BigIronGuru
293018f76c
Apply needed BLTouch patch ( #14233 )
2019-06-07 21:43:20 -05:00
Scott Lahteine
ffb76b75d7
fix TMC2208 boot loop with SW UART ( #14135 )
...
Need stepper .begin() before calling susbequent .push()
2019-06-07 07:27:10 -05:00
InsanityAutomation
4138b1f9ae
Option to disable Case Light brightness control ( #14165 )
2019-06-07 07:23:42 -05:00
Tanguy Pruvot
764f0d9c1c
STM32F1: Servo "soft" PWM via timer interrupt ( #14187 )
2019-06-07 07:11:48 -05:00
InsanityAutomation
66e22d9f5a
ExtUI Heated Chamber support ( #14198 )
2019-06-07 07:08:41 -05:00
Scott Lahteine
9206c0e869
Use limit switch overrides
2019-06-05 22:27:06 -05:00
Scott Lahteine
34d2801bbe
Rename pins file (2)
2019-06-05 21:41:58 -05:00
Scott Lahteine
fa3b5fb059
Uppercase pins filename
2019-06-05 21:41:58 -05:00
Scott Lahteine
858b2fa21a
Fix thermistor table
2019-06-05 21:39:39 -05:00
InsanityAutomation
f6ec00d776
Update thermistor and working config
2019-06-04 20:25:00 -04:00
InsanityAutomation
bbcb61e042
Initial Commit - Add board
2019-06-03 23:49:19 -04:00
Tanguy Pruvot
e4260a41cb
Fix a DEBUG_LEVELING_FEATURE string copy ( #14200 )
2019-05-31 18:52:11 -05:00
Ryan
9d9030a39c
Fix Archim1 SD card ( #14184 )
2019-05-30 19:58:38 -05:00
InsanityAutomation
123e58d9c3
Heated Chamber for Graphical LCD ( #14190 )
2019-05-30 18:31:50 -05:00
Scott Lahteine
93ab16c6e4
Remove old mixing ISR comment
2019-05-30 17:05:16 -05:00
Scott Lahteine
6572848d7f
Fix stepper timing bug
2019-05-30 16:58:53 -05:00
Bob Kuhn
688b54d66a
DUE USB composite device field corrections ( #14185 )
2019-05-30 16:26:48 -05:00
InsanityAutomation
f889cc6ea6
ExtUI parity with SPI LCDs ( #14172 )
2019-05-30 16:24:13 -05:00
Scott Lahteine
07021c85c8
Tweak timer16_Sequence_t
2019-05-30 16:09:37 -05:00
Roman Moravčík
d70929f7c0
Update Slovak language ( #14179 )
2019-05-30 15:57:14 -05:00
Tanguy Pruvot
e3a468f2cd
STM32F1: FSMC only on chips with 100/144 pins ( #14180 )
2019-05-30 15:51:02 -05:00
Ludy
8e8e48f900
Fix links in templates, gcode.h ( #14160 )
2019-05-28 21:39:55 -05:00
InsanityAutomation
34ae76025e
Clear Pausing message after M600 park ( #14171 )
2019-05-28 21:36:14 -05:00
Ludy
bd494a6bd6
Update defines for patched temperature macros ( #14161 )
2019-05-28 17:43:31 -05:00
doggyfan
e09d8811c1
Apply grace period to thermistor failure testing ( #14167 )
2019-05-28 15:36:03 -05:00
InsanityAutomation
0f04ba016f
Adjust tool offset menus ( #14153 )
2019-05-27 21:29:08 -05:00
teemuatlut
bf4a0db97f
TMC LCD followup ( #14134 )
2019-05-27 21:24:20 -05:00
Minims
32afe1d102
Fix TOOLCHANGE_ZRAISE warning ( #14156 )
2019-05-27 19:51:29 -05:00
Robby Candra
5515f88452
Clarify SD longname string size ( #14148 )
2019-05-27 19:50:48 -05:00
Tanguy Pruvot
5f42d3a8b4
BLTouch French updates ( #14137 )
2019-05-27 01:02:35 -05:00
Scott Lahteine
d3bb5b69ba
Apply NOLESS/NOMORE
2019-05-26 20:55:00 -05:00
Scott Lahteine
b315157053
Apply const to mcp4728
2019-05-26 20:54:24 -05:00
Scott Lahteine
3c179bbd47
Simpler G28 home axis conditions
2019-05-26 16:26:55 -05:00
Scott Lahteine
352734494b
Reduce some M43 strings
2019-05-26 16:21:28 -05:00
Scott Lahteine
b14cc0d7c5
Remove extra gcode. prefix
2019-05-26 16:18:45 -05:00
Scott Lahteine
c6d39319de
Fix some whitespace
2019-05-26 16:18:43 -05:00
InsanityAutomation
212860f090
Always change to Tool 0 on G29 ( #14146 )
2019-05-26 14:53:21 -05:00
Giuliano Zaro
7b838f31be
DUE HAL cleanup ( #14126 )
2019-05-26 14:51:32 -05:00
Chris
36a0376c36
fix TMC2208 boot loop with SW UART
...
Need stepper .begin() before calling susbequent .push()
2019-05-26 13:07:12 +02:00
Robby Candra
df7733425c
Shorten pause message for 4 line LCD ( #14097 )
2019-05-26 02:33:52 -05:00
Scott Lahteine
605ec0a478
Fix thermistor table warning
2019-05-26 01:30:20 -05:00
doggyfan
90121047d9
Fix thermal protection with user thermistor ( #14130 )
2019-05-25 23:37:08 -05:00
Scott Lahteine
81cee05476
Update some env in pins.h
2019-05-25 23:17:50 -05:00
Scott Lahteine
47fd74a98d
Clean up fast_pwm.cpp
2019-05-25 23:05:01 -05:00
Scott Lahteine
49229d97db
Consistent _useTimerX tests
2019-05-25 23:05:01 -05:00
Scott Lahteine
8924389dfc
Tweak servo µs macros
2019-05-25 22:33:51 -05:00
InsanityAutomation
49e83dd7c8
BLTouch V3.1 changes ( #14104 )
2019-05-25 21:56:47 -05:00
Scott Lahteine
14fe41f6b2
Update Z probe offset comment
2019-05-25 19:41:15 -05:00
Scott Lahteine
f8bede6b5e
Fix some HAL includes
2019-05-25 19:20:17 -05:00
Bryan
0ef5d667b6
Fixed M43 parameter bug ( #14099 )
2019-05-25 18:23:25 -05:00
teemuatlut
1c86fbc60b
TMC updates, capture LCD changes ( #14074 )
2019-05-25 18:22:12 -05:00
felixstorm
74f44783ac
ESP32 servo support ( #14109 )
2019-05-25 18:12:24 -05:00
felixstorm
bc5a1fe562
Various fixes for ESP32 ( #14102 )
2019-05-25 17:06:00 -05:00
Giuliano Zaro
e1bf34bdc9
Ruramps4d typo fix ( #14096 )
2019-05-25 16:41:08 -05:00
Scott Lahteine
7cce6b8d68
Bring configs up to date (MANUAL_FEEDRATE)
2019-05-25 16:31:13 -05:00
Scott Lahteine
44caf70917
Improve editing, fix some small value editing
2019-05-25 15:29:00 -05:00
Scott Lahteine
612eaa87bd
Fix "back" items in some sub-menus
2019-05-25 15:28:52 -05:00
Scott Lahteine
c5dc2e5a71
Update advanced BLTouch menu items
2019-05-25 15:26:25 -05:00
Scott Lahteine
48d1bd29cb
Shift m before compare to 0
2019-05-25 15:22:15 -05:00
InsanityAutomation
9f69fbe5ee
Move some menu items ( #14118 )
2019-05-25 15:16:00 -05:00
Scott Lahteine
fc52c43a26
Some documentation updates
2019-05-24 16:30:44 -05:00
Tanguy Pruvot
24b1818245
Secure STM32F1 servo code and M280 detach ( #14085 )
2019-05-22 16:57:19 -05:00
Scott Lahteine
a49919396a
LPC1768 MarlinServo => libServo
2019-05-22 16:54:52 -05:00
Scott Lahteine
2b5046659a
Tweak Marlin headers, comments
2019-05-22 16:54:52 -05:00
Scott Lahteine
cc862a8213
Replace some functions with lambdas
2019-05-22 16:54:35 -05:00
Ludy
fafd73a3af
Update copyright in headers ( #14092 )
2019-05-22 16:24:13 -05:00
Giuliano Zaro
2298923a9b
Update Italian language ( #14095 )
2019-05-22 16:23:41 -05:00
Ludy
41f61a12b8
Update German language ( #14093 )
2019-05-22 16:23:16 -05:00
doggyfan
594f6b14be
Limit user thermistor to 999, fix thermistor table macro ( #14080 )
2019-05-21 21:31:05 -05:00
Giuliano Zaro
a74aad3b4a
Clean up HALs / FastIO ( #14082 )
2019-05-21 18:28:12 -05:00
Scott Lahteine
4ef364a073
Sanity check probe offsets must be integers
2019-05-21 17:16:21 -05:00
Scott Lahteine
cfca07852a
Backlash linker error workaround
...
Fix #14045
2019-05-20 21:52:56 -05:00
Scott Lahteine
aeec9ef76b
Update backlash code
2019-05-20 21:34:08 -05:00
Scott Lahteine
7b4c3bd92a
Fix call to synchronize in lcd_pause_job
2019-05-19 15:51:45 -05:00
Scott Lahteine
9bf65eacaa
Remove old adv config heading
2019-05-19 15:24:01 -05:00
Pavel4e5
3cd19a8ec0
Improve Zonestar keypad responsiveness ( #14056 )
2019-05-18 20:52:55 -05:00
Tanguy Pruvot
402f1f7307
STM32F1: STM32_HIGH_DENSITY is auto defined in HAL ( #14057 )
...
- Fix the `fsmc` and `sdio` units which required hard defines for use.
2019-05-18 20:45:22 -05:00
Tanguy Pruvot
87e7193259
Fix M226 sign warning (for most platforms) ( #14049 )
2019-05-18 16:15:48 -05:00
Tanguy Pruvot
256f810df2
Add open-drain output mode to STM32F1 FastIO ( #14050 )
...
- This mode is often used/preferred to drive printer boards' MOSFETs.
- Can generally boost the allowed output power (for hotbed,nozzle and fans).
2019-05-18 16:12:00 -05:00
Bob Kuhn
1dad6e754b
Neopixel background LED option ( #14025 )
2019-05-18 02:36:37 -05:00
InsanityAutomation
84ac5b360b
Fix ExtUI mesh functions ( #14027 )
2019-05-17 20:37:23 -05:00
Scott Lahteine
9b5f9dda0e
Update analog pins labels
2019-05-17 20:22:25 -05:00
FanDjango
85fb33a060
BLTOUCH tweaks, new v3.1 command ( #14015 )
2019-05-17 19:10:18 -05:00
GUEST.it
62ef54cb81
UBL: Log and display G29 progress ( #14036 )
2019-05-17 19:02:21 -05:00
GUEST.it
7907eec04c
Fix power loss recovery with SINGLENOZZLE ( #14033 )
2019-05-17 18:47:15 -05:00
Scott Lahteine
efe651e749
Add THERMISTOR_NAME for 1000
2019-05-17 18:26:53 -05:00
Scott Lahteine
0b056970c6
Fix file.open in STM32 eeprom emu
2019-05-17 18:26:53 -05:00
InsanityAutomation
06f3273531
Fix DELTA pulse wait bug ( #14028 )
2019-05-17 16:16:56 -05:00
Marcio Teixeira
7ccbcf2eaa
Fix TMC EEPROM regression ( #14008 )
...
Partially undo 15357af
2019-05-16 20:38:03 -05:00
Marcio Teixeira
9558962d59
Fix DUE HAL SW SPI compile error ( #14005 )
2019-05-16 20:36:19 -05:00
InsanityAutomation
07afe69cee
Fix some bad AZTEEG_X5_MINI pins ( #14011 )
2019-05-16 20:33:00 -05:00
Chris Pepper
451ea996c9
[LPC176x] Fix switch fallthrough
2019-05-15 10:35:26 +01:00
Tanguy Pruvot
d7b0369e39
STM32: Fix SD EEPROM emulation conflict ( #14012 )
2019-05-15 02:42:10 -05:00
Scott Lahteine
785c01f2bc
Use US spelling of 'behavior'
2019-05-15 01:49:17 -05:00
Sam Lane
7f1e0c5670
Update EXTRA_LINADV_K with Marlin bit macros ( #13993 )
2019-05-15 01:07:07 -05:00
Bob Kuhn
48bd8899bd
Cohesion 3D Remix: Onboard SD card, Fysetc LCD ( #13991 )
2019-05-15 00:59:57 -05:00
FanDjango
dcaefc68a5
BLTouch.init should not deploy ( #13988 )
...
Low or unknown probe clearance on init (even at powerup) is a risk and therefore, a deploy should be avoided because dragging the pin is possible: A deploy goes into alarm if it can't extend fully and then the subsequent stow will fail.
2019-05-14 23:55:11 -05:00
Tanguy Pruvot
8075893352
STM32: fix sdcard filename conversion
2019-05-12 04:26:21 +02:00
chai-md
940ff8e7c8
Improve LV8729 stepping ( #13776 )
2019-05-11 19:02:19 -05:00
InsanityAutomation
991ee7552b
Restore menu edit to 32bit value ( #13976 )
2019-05-11 18:44:35 -05:00
Tanguy Pruvot
93dd097b1c
Use E2END, if defined, for STM32F1 (SD) ( #13981 )
2019-05-11 18:22:31 -05:00
InsanityAutomation
5108e4b6aa
Cleaner EEPROM auto init ( #13975 )
2019-05-11 16:54:03 -05:00
Bob Kuhn
456a0ee76b
Improve Due SW SPI, Fysetc sanity checks, &c. ( #13939 )
2019-05-11 16:51:39 -05:00
Robby Candra
7b78a20fb7
Fix: Debug Memory Dump size ( #13957 )
...
* Fix Memory Dump size
* Fix Compile error on Memory Dump
2019-05-11 11:44:39 -05:00
Scott Lahteine
a613bcad2d
Fix some spelling
2019-05-10 20:39:19 -05:00
Tanguy Pruvot
62b36d1b98
Fix STM32 timer warnings ( #13946 )
2019-05-10 20:00:21 -05:00
Giuliano Zaro
f22c9a1ae1
Fix G-code parser with MMU2 ( #13951 )
2019-05-10 19:57:15 -05:00
Marcio Teixeira
746c38f4be
Fix HAL_DUE multiple define error with graphical LCD ( #13971 )
2019-05-10 19:52:43 -05:00
Bob Kuhn
75eca5c4f8
Fysetc pins updates for RAMPS and SKR 1.3 ( #13963 )
2019-05-10 19:29:28 -05:00
Marcio Teixeira
227f29090d
Add heater timeouts to ExtUI ( #13970 )
...
- Add local UI methods to get heater timeout state.
- Add methods to resume timed-out heaters.
- Re-enable heaters on UI temperature request.
- Make `ExtUI` show a dialog box if pause needs a button press after reheat.
2019-05-10 15:56:13 -05:00
Bob Kuhn
fa3739aa23
M100: LPC1768 and DUE compatibility ( #13962 )
2019-05-09 21:57:44 -05:00
InsanityAutomation
3f758d9e00
Fix some edit items for 16-bit encoder ( #13948 )
2019-05-09 18:28:47 -05:00
ManuelMcLure
51acbb2201
Prevent HOST_PROMPT_SUPPORT compile error ( #13943 )
2019-05-09 11:48:31 -05:00
Scott Lahteine
ad4ffa1d2f
Use C++ language supported 'nullptr' ( #13944 )
2019-05-09 11:45:55 -05:00
Tanguy Pruvot
e53d7e5517
STM32: ADC warning fix ( #13933 )
2019-05-09 00:33:38 -05:00
Scott Lahteine
23ec650410
Consolidate Malyan LCD and ExtUI
2019-05-07 21:31:30 -05:00
InsanityAutomation
6811e2921b
BLTouch v3 / 3DTouch Interoperability & performance ( #13814 )
2019-05-07 21:25:54 -05:00
Giuliano Zaro
40aff7e1f2
Remove extra MMU (non-12V) code ( #13938 )
...
`check_version` in state -5 should not be needed since it has already been called in state -4 and the tested build nr is only updated in state -4.
2019-05-07 21:02:08 -05:00
Tanguy Pruvot
11adcf1ce3
Add'l PLR options, AVR strstr_P compat ( #13880 )
2019-05-07 20:38:40 -05:00
InsanityAutomation
5dcb25664f
Option to Auto-Initialize EEPROM ( #13935 )
2019-05-07 16:30:31 -05:00
Ludy
a504366138
Fix probe fan compiling error ( #13930 )
2019-05-07 14:14:12 -05:00
Tanguy Pruvot
24e956d168
Avoid int8_t underflow on filament runout ( #13895 )
2019-05-07 13:58:10 -05:00
Stephan
483822f3aa
Fix some THERMAL_PROTECTION_CHAMBER issues ( #13678 )
2019-05-06 19:55:01 -05:00
doggyfan
23a8707ef1
Configurable Thermistor ( #13888 )
2019-05-06 18:51:06 -05:00
J.C. Nelson
172abc305b
Malyan M200 core fixes ( #13927 )
2019-05-06 18:07:13 -05:00
Scott Lahteine
a36782ac1d
Define more u8g command macros
2019-05-06 17:26:34 -05:00
Scott Lahteine
f9a50f451d
Serial out cleanup
2019-05-06 17:26:34 -05:00
Scott Lahteine
9853331b34
Fix temp init, loosen ADC grace period
2019-05-05 22:55:03 -05:00
Tanguy Pruvot
a4c24511f7
STM32: Fix Marduino SBI/CBI redefine ( #13912 )
2019-05-05 22:06:30 -05:00
Ludy
c837e9250c
Define tmc variables where needed ( #13918 )
2019-05-05 22:04:47 -05:00
Ludy
f96eaad1ea
Unused variable cleanup ( #13917 )
2019-05-05 22:01:04 -05:00
Ludy
421d526ba7
Update German language ( #13915 )
2019-05-05 22:00:19 -05:00
Giuliano Zaro
b07360f32a
Update Italian language ( #13916 )
2019-05-05 21:59:34 -05:00
Robby Candra
79955f0c89
Fix PLR file delete bug ( #13860 )
2019-05-04 23:30:47 -05:00
ManuelMcLure
09f1b58146
Fix HOST_PROMPT_SUPPORT compile issue ( #13847 )
2019-05-04 22:55:51 -05:00
Giuliano Zaro
e2a77ed881
Bring chamber temp to completion ( #13837 )
2019-05-04 22:51:47 -05:00
Robert Mendon
24177954dd
Add missing AZSMZ Mini SPI pins ( #13824 )
2019-05-04 22:04:01 -05:00
kAdonis
ee73e17c9b
Hide 'vsense' report row if not used ( #13884 )
2019-05-04 22:00:24 -05:00
jmdearras
68004174d9
Fix thermistor 501 name ( #13839 )
2019-05-04 21:40:41 -05:00
Bob Kuhn
c48e6be366
Fysetc panel, RUMBA and ReARM pins, SPI mode 3 ( #13900 )
2019-05-04 17:59:36 -05:00
Chris
fd9d3ae181
Re-Arm 4x TMC2208 stepper improvement ( #13819 )
2019-05-04 17:26:13 -05:00
Tanguy Pruvot
e7b3720b81
Menu edit accel in increments of 25 ( #13850 )
2019-05-04 17:21:58 -05:00
Tanguy Pruvot
7da63fa03f
Fix NOMORE() sign warning in stepper ( #13894 )
2019-05-04 15:59:38 -05:00
Roman Moravčík
6d0ce033c2
Update Slovak language. ( #13840 )
2019-05-04 15:58:01 -05:00
InsanityAutomation
3fcab8dbf1
Option to disable fans during pause ( #13820 )
2019-05-04 15:50:44 -05:00
Chris Pepper
66f7065248
[LPC176x] Update extra script to support Python3 ( #13908 )
2019-05-04 20:52:28 +01:00
Scott Lahteine
2f32a6612d
Clean up Temperature::set_fans_paused
2019-05-04 14:36:59 -05:00
Marcio Teixeira
15357af67c
Backlash cleanup ( #13659 )
...
…And save backlash, fil. sensor, ExtUI userdata to EEPROM.
2019-05-03 23:53:15 -05:00
Robby Candra
0181e57417
Add a minimum Z change option to power-loss recovery ( #13859 )
2019-05-02 22:29:05 -05:00
Robby Candra
c369477cb0
Fix bug: diveToFile breaks M23 ( #13865 )
2019-05-02 15:54:24 -05:00
Tanguy Pruvot
e5438a9a03
settings: store runout sensor on/off ( #13876 )
2019-05-02 00:47:26 -05:00
Scott Lahteine
e7682eea42
Use Arduino.h include wrapper ( #13877 )
2019-05-02 00:45:50 -05:00
Tanguy Pruvot
51d1e0f1dd
Auto-mount the SDIO SD card ( #13879 )
2019-05-02 00:45:21 -05:00
Thomas Moore
ee243e4edf
Fix mixing extruder filament change ( #13803 )
2019-05-01 21:55:58 -05:00
Scott Lahteine
bf54251a10
Finish, improve, clean up FYSETC_MINI_12864 revisions ( #13871 )
2019-05-01 20:05:29 -05:00
Scott Lahteine
9372e2603c
Simpler neopixel comment
2019-05-01 13:55:51 -05:00
Tanguy Pruvot
3272d0db01
Update French language ( #13866 )
2019-05-01 13:00:07 -05:00
Chris Pepper
95beafa9a2
Fix typo
2019-05-01 16:30:21 +01:00
Ludy
408a5f08dc
Update German language ( #13853 )
2019-05-01 01:25:57 -05:00
Tanguy Pruvot
cf3c746029
Improve French language ( #13851 )
2019-05-01 01:12:25 -05:00
Clinton James
2740cc64d8
Add SD Release when no SD_DETECT_PIN exists ( #13857 )
2019-05-01 01:00:21 -05:00
Luu Lac
39ebca6b5f
Fix FYSETC, MINIPANEL, MKS_MINI_12864 display ( #13864 )
2019-05-01 00:37:52 -05:00
Giuliano Zaro
93dcb537ef
Update Italian language ( #13809 )
2019-04-30 20:31:40 -05:00
Roxy-3D
142c8e2fed
Remove redundant Frivolous Game Options
2019-04-28 14:03:53 -05:00
Scott Lahteine
e43afb1a58
Clean up SKR pins
2019-04-27 14:56:12 +02:00
Scott Lahteine
9ccbd382e7
Update Watchdog description
2019-04-27 14:56:12 +02:00
Scott Lahteine
b6279abd30
Better THERMAL_PROTECTION_GRACE_PERIOD
...
See #13783
2019-04-27 14:40:09 +02:00
chai-md
ed9eaa1942
Fix a comment in fwretract.cpp ( #13802 )
2019-04-26 09:36:29 +02:00
InsanityAutomation
610fb46683
Fix some ExtUI issues ( #13799 )
2019-04-26 09:32:01 +02:00
Bob-the-Kuhn
db89fc0304
Revert "bring my copy up to date"
...
This reverts commit 503905c628
2019-04-25 17:38:41 -05:00
Bob-the-Kuhn
503905c628
bring my copy up to date
2019-04-25 12:08:49 -05:00
Bob-the-Kuhn
73726d56b3
Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x
2019-04-25 12:06:01 -05:00
Scott Lahteine
5051909c3c
Update do_select_screen for general use ( #13800 )
2019-04-24 10:13:44 -05:00
Scott Lahteine
63f6ad3fd2
Basic RAMPS SD_DETECT_PIN override
2019-04-23 18:10:21 -05:00
InsanityAutomation
c6632925e3
Force no move on IDEX full control mode ( #13797 )
2019-04-23 15:20:59 -05:00
Giuliano Zaro
e2dd2268e8
Add a Z raise-between-probes to G34 ( #13791 )
2019-04-23 13:40:55 -05:00
Giuliano Zaro
0f9c49ccba
Update Italian language ( #13790 )
2019-04-23 13:36:05 -05:00
Giuliano Zaro
d77ef437db
Fix warning for redefined DEBUG_PRINT_P ( #13789 )
2019-04-23 13:35:02 -05:00
Marcio Teixeira
ca7f6ff287
Fix MSG_En messages for consistency ( #13788 )
2019-04-23 13:31:51 -05:00
Scott Lahteine
6ff81a33c1
Provide JSON values for SOFT_PWM_SCALE
2019-04-22 14:06:14 -05:00
Scott Lahteine
0c4d3e6622
Improve M906 description
2019-04-22 13:48:02 -05:00
Tanguy Pruvot
04ae3ba1fd
Major update to French language ( #13784 )
2019-04-22 13:31:04 -05:00
chai-md
78d7349fd7
Remove extra Z raises in tool change ( #13782 )
2019-04-21 21:06:46 -05:00
Kajetan Rzepecki
875e673a8c
Add HAL-based thermal protection grace period for all heaters ( #13778 )
2019-04-21 20:50:32 -05:00
Bob Kuhn
81ca5a4cd4
Fix and improve FYSETC LCD support ( #13767 )
2019-04-21 20:48:53 -05:00
felixstorm
4e35e6c705
Fix SS pin in ESP32 HW SPI ( #13781 )
2019-04-21 17:15:15 -05:00
felixstorm
4a48b70c0b
Fix (re-)defines in HAL_ESP32 ( #13780 )
2019-04-21 17:14:38 -05:00
Ludy
4228fd3e03
Update German language ( #13769 )
2019-04-20 15:01:56 -05:00
Kajetan Rzepecki
5f70c876ae
Fix _temp_error-related compile error ( #13768 )
2019-04-20 13:57:38 -05:00
Kajetan Rzepecki
ea1ee02b53
Disable hardware PWM on ESP32 I2S expander ( #13762 )
2019-04-20 13:41:17 -05:00
Scott Lahteine
bddb776ddb
Add chamber max-temp check
...
Followup to #13756
2019-04-19 22:18:55 -05:00
Marcio Teixeira
d0c1eee53b
Add extra max-temp safety checks ( #13756 )
2019-04-19 21:37:12 -05:00
Marcio Teixeira
4ac28ba6b3
Add missing file ( #13754 )
2019-04-19 20:20:45 -05:00
jmdearras
b65cb5704d
Fix, improve FYSETC_MINI_12864 support ( #13730 )
2019-04-19 20:11:51 -05:00
Scott Lahteine
69c333ead9
More universal Formbot pins
...
Replace `ROXYs_TRex` with pre-defines of the relevant pins at the configuration level.
2019-04-18 21:09:34 -05:00
Scott Lahteine
0a6835fbea
More robust HAS_LCD_CONTRAST
2019-04-18 21:09:34 -05:00
Marcio Teixeira
2e3d121ac4
Squelch compiler warning ( #13739 )
2019-04-18 13:18:49 -05:00
Kajetan Rzepecki
d83a7924e6
Fix ESP32 TOGGLE() with I2S expander ( #13743 )
2019-04-18 13:15:35 -05:00
Jimmy Wennlund
e6f6ed76c8
Show UBL Activate/Deactivate menu for current state ( #13744 )
2019-04-18 13:13:05 -05:00
Marcio Teixeira
08f21335a6
Fix bad opcode in LIGHTWEIGHT_UI; add 32-bit HAL and Due compatibility ( #13751 )
2019-04-18 13:10:58 -05:00
Kajetan Rzepecki
7c8ee0cd5b
Enable more ADC1 channels (pins 32-39) ( #13742 )
2019-04-18 13:01:24 -05:00
Bob-the-Kuhn
520585c5ed
Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x
2019-04-17 15:34:29 -05:00
Kajetan Rzepecki
e1acc09c6e
Fix LPC1768 HAL SSD* screen init ( #13741 )
2019-04-17 14:57:50 -05:00
Marcio Teixeira
836435c5ef
Fix action_edit int range bug ( #13737 )
2019-04-17 14:55:31 -05:00
Antonio Pérez
bf28ad4b6c
Fix clear of Z position last digit ( #13731 )
2019-04-17 14:52:20 -05:00
Marcio Teixeira
866e2d41dc
Correct range of LCD axis step editing ( #13727 )
2019-04-16 15:45:31 -05:00
Scott Lahteine
ab8052887f
Add missing MSG_PAUSE_PRINT_INIT_1 for en
2019-04-16 13:54:20 -05:00
petrzjunior
12d340cf2a
Update Czech language ( #13729 )
2019-04-16 13:53:14 -05:00
Robby Candra
e8dc87a2b7
Fix updated Allen Key pause probe logic ( #13723 )
2019-04-16 12:35:58 -05:00
Robby Candra
7ca1fea22b
Option to pause probe deployment only when triggered, for manually-deployed allen-key probe ( #13698 )
2019-04-16 01:32:43 -05:00
Robby Candra
35160dfb7a
Simplify PLR homing when Z homes to max ( #13718 )
2019-04-16 00:17:27 -05:00
Scott Lahteine
92ed9a2bb6
Fix is_M29
...
Followup for #13013
2019-04-15 23:47:06 -05:00
jmdearras
5f49b65c1f
Move LPC SD options to configs, add MKS_MINI_DISPLAY to SKR boards ( #13712 )
2019-04-15 22:55:33 -05:00
Bob Kuhn
9b578ca343
Support FYSETC_MINI_12864 on Re-ARM, RAMPS_FD, MKS SBASE ( #13717 )
2019-04-15 22:54:11 -05:00
Scott Lahteine
9992c424f5
Patch G92.9 flags
...
Followup to #13703
2019-04-15 20:26:40 -05:00
ManuelMcLure
b1c13bce58
Fix EEPROM_CHITCHAT (and debug_out.h) ( #13716 )
2019-04-15 20:21:26 -05:00
Msq001
455ee23499
Fix, improve Power Loss Recovery ( #13703 )
...
- Save and restore workspace offsets
- Add retract and purge (hidden) options
- Always restore axis relative modes
- Use added `G92.9` to do position restores
2019-04-15 18:53:39 -05:00
Laurent
df75a606ff
Support MKS SGen board ( #13694 )
2019-04-15 17:03:10 -05:00
Kajetan Rzepecki
20dc45bca7
Refactor, fix ESP32 WebSocketSerial ( #13689 )
2019-04-15 16:32:20 -05:00
Roman Moravčík
db373f130c
Update Slovak language ( #13692 )
2019-04-15 16:14:49 -05:00
Kajetan Rzepecki
6fe90f0324
Define I2S pins for ESP32 ( #13714 )
2019-04-15 16:13:59 -05:00
InsanityAutomation
aa0f7afbe6
Fix call to uninitialized PWM pin, heater 2 overlap ( #13674 )
2019-04-15 15:57:34 -05:00
Bob-the-Kuhn
57aaa9110b
Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x
2019-04-13 21:14:52 -05:00
Scott Lahteine
6a71df2925
Tweak babystep add_steps
2019-04-13 14:14:26 -05:00
Bob-the-Kuhn
9dd4252b39
Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x
2019-04-12 22:07:12 -05:00
Marcio Teixeira
bdfffee037
Modify Z-offset overlay for clarity ( #13660 )
2019-04-12 15:43:29 -05:00
Stephan
84273557f9
Move and update heated chamber settings ( #13671 )
...
Co-Authored-By: the-real-orca <stephan.veigl@gmail.com>
2019-04-12 15:38:10 -05:00
Ludy
62b4265410
Update German language ( #13665 )
2019-04-12 14:48:13 -05:00
Scott Lahteine
b18316dd37
Fix some spacing
2019-04-12 13:35:42 -05:00
Scott Lahteine
f2ba0a5ae7
Tweak some formatting
2019-04-12 13:15:37 -05:00
Scott Lahteine
7e58d33a2e
Update some headers
2019-04-12 13:04:04 -05:00
Giuliano Zaro
64ee064ded
Update Italian language ( #13661 )
2019-04-12 12:22:43 -05:00
Scott Lahteine
14b561f182
Extra AxisEnum values for E0-E5
2019-04-12 12:13:48 -05:00
Robby Candra
9e86fc3831
Require homing to toggle leveling ( #13652 )
2019-04-11 14:09:41 -05:00
Ludy
9fd3e64ba8
Fix compile error with EXTRUDER>1 ( #13651 )
2019-04-11 13:58:50 -05:00
Jamie
509dc283f2
Restore declarations of G53-G59 ( #13654 )
2019-04-11 13:51:05 -05:00
chai-md
2adc37becc
MAGNETIC_SWITCHING_TOOLHEAD ( #13629 )
2019-04-11 13:29:17 -05:00
ManuelMcLure
492883859e
Don't protect unused CS pins ( #13647 )
2019-04-10 21:57:57 -05:00
Scott Lahteine
9898f53361
Fix missing IS_SD_PRINTING
2019-04-10 21:48:16 -05:00
Scott Lahteine
1e59a2ac73
Hide pause/stop unless active printing
2019-04-10 19:46:59 -05:00
Scott Lahteine
ae42206500
Fix SD_REPRINT_LAST_SELECTED_FILE
2019-04-10 17:43:08 -05:00
Scott Lahteine
d72946a8d7
Fix LPC1768 build with no watchdog
...
Fix issue mentioned at https://github.com/MarlinFirmware/Marlin/pull/13587#issuecomment-481737509
2019-04-10 17:34:15 -05:00
Scott Lahteine
cee3b172b9
Fix Marlin splash screen logic ( #13646 )
2019-04-10 17:14:57 -05:00
ANMay-ru
052f2ac352
Fix RURAMPS4D baud rate ( #13644 )
2019-04-10 15:53:21 -05:00
Marcio Teixeira
e6ebd30f60
Fix LCD issue on stepper timeout ( #13630 )
...
- Remove a re-paint of the status screen on stepper timeout, which would cause a garbled LCD with `LIGHTWEIGHT_UI` and could interrupt whatever else the user might be doing in a submenu (such as playing games!)
- Use the helper function to reset stepper timeout.
2019-04-10 15:51:48 -05:00
klcjr89
a8edd4f6d4
Fix Azteeg X5 MINI BOARD_NAME ( #13632 )
...
Co-Authored-By: klcjr89 <klcjr89@users.noreply.github.com>
2019-04-10 15:46:12 -05:00
Scott Lahteine
5018fdacbe
Support FYSETC_MINI_12864_PANEL ( #13365 )
2019-04-09 18:34:29 -05:00
InsanityAutomation
4900c28bf6
Fix IDEX tool-change, and more ( #13614 )
2019-04-09 18:33:40 -05:00
InsanityAutomation
ba31d39f6d
Azteeg X5 Mini support ( #13425 )
2019-04-08 23:10:45 -05:00
Scott Lahteine
9cb5c57b84
Adjustments to ui8tostr_percent
2019-04-08 21:47:50 -05:00
Scott Lahteine
321a5e6580
Fix SD card reselect when scrolled ( #13624 )
...
- Change encoder position to 16-bit integer.
- Fix `SD_REPRINT_LAST_SELECTED_FILE` when the screen is scrolled.
2019-04-08 21:10:41 -05:00
Scott Lahteine
0e3c9e726d
Set default Raptor runout/caselight pins
2019-04-08 18:18:08 -05:00
Scott Lahteine
5e38d70697
Fix M217 report label, general cleanup
2019-04-08 18:18:08 -05:00
Scott Lahteine
fae2b7edc3
Update MMU2 code style
2019-04-08 18:13:42 -05:00
Scott Lahteine
c8a83fb122
SPINDLE_LASER_ENABLE => SPINDLE_LASER_ENA
2019-04-08 18:13:41 -05:00
Scott Lahteine
9abe9aff56
Confirm before starting SD print ( #13616 )
2019-04-08 13:44:35 -05:00
Scott Lahteine
7e0008f5b3
Fix SETCURSOR_RJ
2019-04-07 20:25:54 -05:00
Robby Candra
81c2c3ec11
Continuous filename scrolling ( #13609 )
2019-04-07 16:58:32 -05:00
Ludy
c29820f649
Suppress compile warning ( #13612 )
2019-04-07 16:53:30 -05:00
Scott Lahteine
a2b3ad6d0a
Don't override RGB LED pins, by default
2019-04-07 16:42:26 -05:00
Bob Kuhn
9a56d90150
Fix M43 on LPC176x ( #13587 )
...
The real fix. PR #13568 was wrong.
2019-04-06 18:06:07 -05:00
Roxy-3D
9cee81d47e
Option to show babysteps total since G28 ( #13580 )
2019-04-06 18:04:34 -05:00
Scott Lahteine
3221658a78
Adjust park position description
2019-04-05 20:40:50 -05:00
Scott Lahteine
028b78f623
Suppress a compile warning
2019-04-05 20:06:19 -05:00
Scott Lahteine
cf12fc8366
Expand on serial debugging ( #13577 )
2019-04-05 20:02:46 -05:00
Marcio Teixeira
bf7b28b456
Fix incorrect variable name ( #13585 )
2019-04-05 19:04:46 -05:00
Kajetan Rzepecki
27693cec29
Extend ESP32 HardwareSerial with flushTX. ( #13588 )
2019-04-05 19:04:02 -05:00
Alexander Gavrilenko
3c47e1b4d1
Support Black STM32F407VET6 with RAMPS-like shield ( #13524 )
2019-04-05 15:30:19 -05:00
VBen
0dfd76ba55
Fix Z hotend offset broken by parking extruder tool change ( #13582 )
2019-04-05 15:28:32 -05:00
Scott Lahteine
027a901bec
Trim whitespace
2019-04-05 15:04:23 -05:00
Kajetan Rzepecki
692a0198f9
Fix SPISettings frequency parameters in ESP32 HW SPI ( #13573 )
2019-04-04 23:17:14 -05:00
Kajetan Rzepecki
63d95862fa
Add FastIO TOGGLE for ESP32 ( #13574 )
2019-04-04 23:15:17 -05:00
drzejkopf
0992d1a4c8
Fix Invaders game compile error ( #13575 )
2019-04-04 23:13:11 -05:00
Robby Candra
cd1ef33c8c
Drop extra PLR save test ( #13554 )
2019-04-04 22:47:00 -05:00
Scott Lahteine
72c7751768
Fix SERIAL_POS in use with DEBUG_OUT
2019-04-04 22:12:03 -05:00
Scott Lahteine
cacec5764a
Clean up whitespace
2019-04-04 22:12:02 -05:00
Scott Lahteine
83e214478e
Click-hold to exit Invaders, fix Brickout compile
2019-04-04 17:07:50 -05:00
Scott Lahteine
240ea1bbb3
Split up games into separate files
2019-04-04 03:06:19 -05:00
Marcio Teixeira
27a4927ed1
Add option to move away from endstop after homing. ( #13557 )
...
Add option to move away from endstop after homing.
- Add `ENDSTOP_BACKOFF` for printers with a recessed Z home button (Lulzbot TAZ 6).
- Also prevents chattering when sensorless homing with axes against bumpers.
2019-04-04 02:47:19 -05:00
InsanityAutomation
d44e5b1fde
Fix stepper direction macros, multi-nozzle scope ( #13569 )
2019-04-04 02:44:07 -05:00
Scott Lahteine
10b9632bed
Fix menu history item selection
2019-04-04 02:41:23 -05:00
Scott Lahteine
f1810689ff
Fix bootscreen condition
2019-04-04 00:19:47 -05:00
Kajetan Rzepecki
b21ca53dfc
SPIFFS-backed PersistentStore for ESP32 ( #13566 )
2019-04-03 20:28:26 -05:00
Scott Lahteine
af92ee9dd6
No PLR include needed in queue.cpp
2019-04-03 18:26:31 -05:00
Scott Lahteine
5d2c5877f7
DOGM bootscreen cleanup
2019-04-03 18:10:50 -05:00
Scott Lahteine
2aa35e95af
More G26 arc cleanup
...
Followup to #13531
2019-04-03 16:03:21 -05:00
Scott Lahteine
20a41e2f7b
SDCARD_RATHERRECENTFIRST with SDCARD_SORT_ALPHA
2019-04-02 22:25:18 -05:00
Robby Candra
46445a5a16
Event G-code for Stop SD Print ( #13547 )
...
Co-Authored-By: 7eggert <7eggert@gmx.de>
Co-Authored-By: robbycandra <robbycandra.mail@gmail.com>
2019-04-02 22:09:30 -05:00
Kajetan Rzepecki
2cfa9e9008
Fixed chamber-related compile error ( #13552 )
2019-04-01 17:53:56 -05:00
Scott Lahteine
a0a5c31c05
Power-Loss initialization fix ( #13553 )
...
- Only save to PLR file on moves with E and X or Y
- Save to PLR after any long-ish Z downward move
2019-04-01 17:52:45 -05:00
Scott Lahteine
8b7c3eec83
Games, for fun (and stress-testing) ( #13464 )
2019-04-01 17:48:54 -05:00
InsanityAutomation
fbc7b51a24
Use NO_FETCH for Dual X G28 ( #13539 )
2019-04-01 17:48:21 -05:00
Scott Lahteine
5de7b5b35e
Games, for fun (and stress-testing) ( #13464 )
2019-04-01 15:43:48 -05:00
InsanityAutomation
4961d8aa3e
Update G28.cpp ( #13539 )
2019-03-31 19:50:40 -05:00
Scott Lahteine
de0046fc8b
Fix empty HAS_TIMER macros
2019-03-30 23:04:40 -05:00
Kajetan Rzepecki
c9079165ee
Fix MAX6675 readout with Hardware SPI ( #13530 )
2019-03-30 22:31:49 -05:00
ManuelMcLure
04086fc455
Minor optimization to ARC_SUPPORT code ( #13531 )
2019-03-30 22:29:37 -05:00
Robby Candra
a3f67acd6d
Fix Power Loss Recovery file delete ( #13522 )
2019-03-30 13:14:58 -05:00
Marcio Teixeira
d992dfe7d5
Use the percent util func in the string func. ( #13523 )
2019-03-30 13:00:31 -05:00
drzejkopf
b1f739e27b
CR10_STOCKDISPLAY support in Bigtreetech SKR ( #13516 )
2019-03-29 14:19:18 -05:00
Marcio Teixeira
5679fae11e
UltraLCD enhancements (lower fan resolution, backlash menu) ( #13519 )
2019-03-29 14:07:43 -05:00
Msq001
f0d14b83bc
Save/restore Relative modes in Power-Loss Recovery ( #13501 )
2019-03-29 13:40:42 -05:00
Marcio Teixeira
c6466c23fe
Silence signed/unsigned comparison warning. ( #13508 )
2019-03-29 13:33:45 -05:00
InsanityAutomation
7240e3a68f
Allow G26 with no heated bed ( #13511 )
2019-03-29 13:32:43 -05:00
Alexander Gavrilenko
6d9aaca082
Fix compilation error for MKS Robin ( #13506 )
2019-03-29 12:40:24 -05:00
Scott Alfter
c6dbe6e9d6
Fix Teensy 3.5/3.6 __get_primask ( #13514 )
2019-03-29 12:23:09 -05:00
Alexander Amelkin
e40636a7c1
Replace digitalPinHasPWM with HAS_TIMER ( #13520 )
2019-03-29 12:21:14 -05:00
Scott Lahteine
b46ca9aa94
Less timely comment, tweak conditions
2019-03-26 19:20:13 -05:00
InsanityAutomation
eb91f08725
Update descriptions and dont call unneeded functions
2019-03-26 11:24:52 -04:00
Ludy
fe346cd4d1
Fix DEBUG_EEPROM_READWRITE compile error ( #13492 )
2019-03-26 04:12:22 -05:00
Sam Lane
e3ab54753b
Add extra Linear Advance factors ( #13490 )
2019-03-26 04:02:27 -05:00
Chris Pepper
ffc2c2d7c5
Move FAST_PWM_FAN code to HALs ( #13491 )
2019-03-26 01:03:23 -05:00
Thomas Moore
263f8edff8
Disable volumetric extrusion during G26 ( #13479 )
2019-03-25 22:41:52 -05:00
Bob Kuhn
6bd0a0be97
Relocate DUE Stepper ISR to TC0,2 ( #13481 )
2019-03-25 22:39:51 -05:00
Thomas Moore
13a12f8a87
Fix UBL mesh editor on delta ( #13478 )
2019-03-25 22:04:57 -05:00
Scott Lahteine
d2e0c03afb
Remove trailing whitespace
2019-03-25 20:51:38 -05:00
Marcio Teixeira
7462fe3068
Fix compile error, squelch warnings ( #13487 )
...
- Fix path to `bedlevel.h` include file
- Add default to `case` statements to suppress warnings
2019-03-25 20:41:38 -05:00
Yannik Sembritzki
0d3ea59bcf
Add pins for Dual Z UART on SKR 1.3 ( #13474 )
...
Fix #13470
2019-03-24 20:09:00 -05:00
pinchies
ef3b93daa1
Fix STM32F1 SD-based EEPROM emulation ( #13475 )
...
If `openFile` is given `true`, then it has read-only access. Because all the writing occurs on the next line, this breaks SD card as EEPROM.
2019-03-24 20:07:31 -05:00
Chris Pepper
aacc1148b0
Fix M106 for index > extruders ( #13473 )
2019-03-24 20:03:53 -05:00
Thomas Moore
c5e96544b5
Fix vtool compiler warning ( #13476 )
2019-03-24 20:02:28 -05:00
Thomas Moore
02dc72acb6
Disable ABL when leveling corners ( #13471 )
2019-03-24 20:01:18 -05:00
7eggert
d96f7d6068
Minimum segments for G2/G3. Better for small arcs. ( #13466 )
2019-03-24 19:53:47 -05:00
Scott Lahteine
380c771988
Handle word-padded flash-based eeprom (STM32F1)
...
Fix #13445
2019-03-24 19:14:04 -05:00
Scott Alfter
32332bcd03
Proceed with Teensy 3.5/3.6 HAL ( #13450 )
2019-03-24 00:08:32 -05:00
Scott Alfter
407202cc0f
Fix BLTouch pre-3.0 compatibility ( #13454 )
2019-03-23 23:28:15 -05:00
Marcio Teixeira
a0ca98f699
Additional ExtUI features ( #13449 )
2019-03-23 23:09:18 -05:00
Sam Lane
a8fa275dc6
Fix Fan 0 responding to all fan speeds ( #13444 )
2019-03-23 23:00:31 -05:00
InsanityAutomation
5eeffab5e5
Fix BLTouch Menus ( #13441 )
2019-03-23 22:58:34 -05:00
Scott Lahteine
d8329d858d
Default argument to defer_status_screen
2019-03-23 16:33:37 -05:00
Giuliano Zaro
9562a02c5a
Update Italian language ( #13440 )
2019-03-20 18:26:55 -05:00
drzejkopf
70e6a3db8a
Add LEVEL_CORNERS_HEIGHT to LEVEL_BED_CORNERS ( #13439 )
2019-03-20 18:26:12 -05:00
Roman Moravčík
f3cf95a937
Update Slovak language. ( #13435 )
2019-03-20 16:37:34 -05:00
Scott Lahteine
144018736a
Use USES_Z_MIN_PROBE_ENDSTOP
2019-03-18 16:58:31 -05:00
InsanityAutomation
5b2c37d6c1
Followup to BLTouch ( #13422 )
2019-03-18 16:31:11 -05:00
InsanityAutomation
3fb8489ae3
EXTUI and UBL compilation fixes ( #13420 )
2019-03-17 07:57:54 -05:00
Scott Lahteine
b376c7e374
Group DISABLED items
2019-03-17 07:56:35 -05:00
Scott Lahteine
58bca67883
Unify status scrolling further
2019-03-17 07:56:35 -05:00
Scott Lahteine
c4443f885e
finishstatus => finish_status
2019-03-17 07:56:35 -05:00
InsanityAutomation
691e5c3bb8
BLTouch V3.0 support ( #13406 )
2019-03-17 05:57:25 -05:00
Scott Lahteine
49cf92dc36
Extended condition macros ( #13419 )
...
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
2019-03-16 23:43:06 -05:00
Tobias Frost
d20eab4f83
Fix macro in set_color() ( #13417 )
2019-03-16 19:05:59 -05:00
Ludy
59353546e8
Fix BUTTON_EXISTS and misplaced comma ( #13411 )
...
Fixes #13410 and redeclaration of `BUTTON_EXISTS`
2019-03-16 11:59:12 -05:00
InsanityAutomation
09eb30dc05
IDEX Mirror mode based on Formbot / Vivedino Symmetric mode ( #13404 )
2019-03-15 22:46:27 -05:00
Scott Lahteine
5c1aa5162d
Adjust M206 output in M503 for DELTA
2019-03-15 19:20:40 -05:00
Scott Lahteine
ad8b82d054
Fix KILL_PIN assignment for MKS_MINI_12864
...
According to #13397
2019-03-15 19:20:40 -05:00
Scott Lahteine
3a916b4ef2
Create bresenham.h
2019-03-15 19:20:39 -05:00
Karl Andersson
5d3928cb01
PWM is not defined on Arduino Core STM32 ( #13405 )
2019-03-15 19:14:06 -05:00
Scott Lahteine
9a515cbd32
Fix Pause Print message and behavior ( #13394 )
2019-03-14 02:26:07 -05:00
Scott Lahteine
f5bcc00570
Unify debugging output with debug_out.h ( #13388 )
2019-03-14 02:25:42 -05:00
Andrei Pozolotin
cc8a871705
Add capability string CHAMBER_TEMPERATURE ( #13391 )
...
Reference: #13380
2019-03-13 18:09:22 -05:00
Scott Lahteine
67bee06e43
No patch needed for non-libmaple analogWrite
...
See https://github.com/pinchies/Marlin/pull/1#issuecomment-471388743
2019-03-13 07:21:10 -05:00
Scott Lahteine
f89b375fb9
Fixes and improvements for PWM pins ( #13383 )
2019-03-13 06:51:15 -05:00
Scott Lahteine
87162658c4
Fix and improve software endstops ( #13386 )
2019-03-13 05:48:36 -05:00
Scott Lahteine
6214c997c0
Remove includes of <binary.h>
2019-03-13 05:32:33 -05:00
Scott Lahteine
4555ae448f
Fixups for ESP32
2019-03-13 05:32:33 -05:00
Scott Lahteine
a5ea3e2f15
Fix hotend offset on switching toolhead change
...
See commentary at #11623
2019-03-13 05:32:21 -05:00
jmz52
8e0ac93d60
Fix 'UNUSED redefined' compiler warning ( #13387 )
2019-03-13 04:34:02 -05:00
Hadrien Jouet
0278ad0a6d
Add ESP32 WiFi interface ( #11209 )
2019-03-13 00:48:08 -05:00
InsanityAutomation
c03df89921
ExtUI Mesh Leveling Extensions ( #13363 )
2019-03-13 00:45:52 -05:00
InsanityAutomation
050eac03af
Single X Duplication Extension ( #13373 )
...
* Multi-nozzle selective duplication
* Use a bit-mask, reduce stepper_indirection.h size
* Tweak the multi-nozzle duplication description
* Use 'S' as a bool in M605
* Add HAS_DUPLICATION_MODE conditional
* Remove '_MODE' from the option name
* M605 in the style of Stacker M280
* Also include direct mask style (P)
2019-03-13 00:42:50 -05:00
Scott Lahteine
ad91476d26
Fix USEABLE_HARDWARE_PWM
2019-03-13 00:12:46 -05:00
Scott Lahteine
d63da4592d
Tweak to SCARA_move_to_cal
2019-03-12 22:06:50 -05:00
Scott Lahteine
51ff5b68fa
Clean up fastIO ahead of PWM patch
2019-03-12 20:39:55 -05:00
Scott Lahteine
388babbcea
Tweak SERIAL_PRINTF
2019-03-11 20:58:27 -05:00
Scott Lahteine
d94e077901
Apply HAS_HOTEND_OFFSET where needed
2019-03-11 20:58:27 -05:00
Scott Lahteine
11d6a939df
Always define axis_unhomed_err
2019-03-11 20:58:27 -05:00
7eggert
10c8c034bd
Allow both encoder and ADC keypad ( #13355 )
2019-03-11 18:10:56 -05:00
Andrei Pozolotin
31ff7da7ac
Add missing CHAMBER options (for M141) ( #13371 )
2019-03-11 16:50:07 -05:00
Scott Lahteine
0375e92847
Followup to serial rework
...
As mentioned in #13370
2019-03-11 16:46:04 -05:00
jmz52
013bb469ca
Fix compilation for STM32F1 with no SDIO ( #13366 )
2019-03-11 16:40:51 -05:00
Scott Lahteine
e52bcc9408
Limit top bed temp to BED_MAXTEMP - 10
...
The chances of a 10° overshoot is pretty minimal.
2019-03-11 16:32:34 -05:00
Scott Lahteine
98b55421a5
Clean up some temp config
2019-03-11 16:31:23 -05:00
InsanityAutomation
785a7028bf
Followup to 'volatile' patch ( #13369 )
...
Originally #13344
2019-03-11 15:01:57 -05:00
Scott Lahteine
aa1d587128
Some LCD code cleanup
2019-03-11 05:07:31 -05:00
Scott Lahteine
fa11427ec6
Remove obsolete LCD_CONTRAST
2019-03-11 03:33:07 -05:00
pinchies
4df9509ead
Add support for printers with inverted fan pins ( #13362 )
...
Add support for printers with inverted fan pins by adding `#define FAN_INVERTING 1` to `Configuration_adv.h` and modifying the fan write macros.
2019-03-10 20:51:21 -05:00
Scott Lahteine
1f7e220387
Make HAL ISR macros function-like
2019-03-10 20:44:27 -05:00
Scott Lahteine
e3ce346f24
Report position to host in Nozzle::park
2019-03-10 19:09:28 -05:00
Scott Lahteine
77b4176152
Use lib include for bit_constants.h
2019-03-10 19:09:28 -05:00
Scott Lahteine
3419099f0a
Clean up whitespace
2019-03-10 19:09:28 -05:00
pinchies
4c43e6c48b
Fix "spontaneous heating" issue (WRITE bug) on STM32 ( #13356 )
...
Should fix "spontanous heating" problems due to order of operations error. Error occurs at least with ststm32 v5.1.0 in PlatformIO.
2019-03-10 17:25:54 -05:00
Michiel Baird
b824a517aa
Add G38.4 and G38.5 ( #13348 )
2019-03-10 17:22:09 -05:00
Bruce j Beare
e4d080e63c
Reset after kill with a button on the KILL_PIN ( #13091 )
2019-03-10 09:57:38 -05:00
MoellerDi
c36989c39e
Fix chamber temperature measurement ( #13350 )
2019-03-10 09:51:13 -05:00
Scott Lahteine
12503fce06
Followup to wait_for_user fix
2019-03-10 09:14:02 -05:00
Scott Lahteine
33a08fc6f7
Fix typos from temperature rework
...
Followup to #12201
2019-03-10 08:28:16 -05:00
Tobias Frost
2efbcc90c5
Fix wait_for_user compile error ( #13352 )
2019-03-10 08:07:41 -05:00
Tobias Frost
60e82e3929
Send notifications to ExtUI for M0/M1 ( #13344 )
...
- Send notifications to ExtUI for M0/M1
- wait_for_user can be non-volatile (not changed by interrupt)
C / C++ compilers don't optimize away reads of non-volatile variables when a function call is used between accesses, because *any* variable could be changed by the function call. Since `wait_for_user` can't be changed without a function call, it should be non-volatile so the compiler can optimize away cases where it is read more than once without an intervening function call.
2019-03-09 14:20:37 -06:00
Marcio Teixeira
00fc43144a
Follow up fixes to various PRs. ( #13334 )
...
- Ensure `MarlinUI:get_progress` is defined for `ExtUI`.
- Fix for `BACKLASH_SMOOTHING` with small segments.
`BACKLASH_SMOOTHING` with extremely small segments failed to fully correct due to the correction factor being rounded down. Rounding up ensures the entire backlash will converge to zero even for small segments.
- Add pinout for the beta revision `EINSY_RETRO`.
- Update soft endstops with tool offsets (for toolchange et. al. move clamping) (#12568 )
2019-03-09 14:20:37 -06:00
Scott Lahteine
c7d618b4d9
Fix SERIAL_ECHOLNPAIR
...
Fix #13333
2019-03-09 14:20:37 -06:00
InsanityAutomation
d54741eda8
Update some G26 plausible values. Add speed control. ( #13330 )
2019-03-08 03:13:44 -06:00
Msq001
fb3302feda
Fix STM32F1 Serial and ADC pins ( #13331 )
2019-03-08 02:21:32 -06:00
Reece Kibble
dbead66988
Allows user to set (almost) any PWM frequency ( #12638 )
2019-03-08 02:15:42 -06:00
Tobias Frost
afbec5ff7e
Have ExtUI::getProgress use ui.get_progress ( #13328 )
2019-03-07 18:00:38 -06:00
3dlabsio
645ca7af7a
M141 Heated Chamber, Temperature rework ( #12201 )
2019-03-07 02:09:39 -06:00
Scott Lahteine
44571775bd
Further support for 6 extruders
2019-03-07 01:00:56 -06:00
Scott Lahteine
893ee68b52
Clean up trailing whitespace
2019-03-06 01:02:43 -06:00
Scott Lahteine
39f1222060
One fewer G29 error string
2019-03-05 23:04:52 -06:00
Scott Lahteine
cfdb38eda4
Allow SERIAL_ECHOPAIR to take up to 12 pairs ( #13311 )
2019-03-05 06:46:19 -06:00
Scott Lahteine
4771e372a1
Update criteria for PAUSE/RESUME/STOP menu items ( #13294 )
2019-03-05 06:46:06 -06:00
Tobias Frost
56fdcf93d1
Disallow SD_DETECT_INVERTED with FYSETC F6. ( #13307 )
2019-03-05 06:45:28 -06:00
Tobias Frost
7ce13a6ec1
Fix a print_job_timer compile error ( #13304 )
2019-03-05 06:39:15 -06:00
Tobias Frost
6df51201ae
Include EXTENSIBLE_UI in single LCD sanity check ( #13306 )
2019-03-05 06:33:36 -06:00
Scott Lahteine
2e5a3b01fd
Save Power Loss Recovery only on move commands
2019-03-05 02:43:29 -06:00
Scott Lahteine
15738ea506
Update a motion comment
2019-03-05 00:50:29 -06:00
Scott Lahteine
bc87e97357
Prevent a tool change move out of bounds
2019-03-05 00:50:29 -06:00
Scott Lahteine
2212da453a
Distinguish between analog/digital auto fans ( #13298 )
2019-03-05 00:41:31 -06:00
Chris Pepper
2513f6b550
Fix multiport G28 with Binary Transfer ( #13308 )
2019-03-04 16:44:54 +00:00
Chris Pepper
38bef9da91
Report auto temp to both serial ports, if available ( #13301 )
2019-03-03 21:03:48 -06:00
Robert Mendon
367d392880
Init stepper current after stepper pins are set up ( #13302 )
2019-03-03 20:58:02 -06:00
InsanityAutomation
bf8b38e0f7
Relocate configs above Marlin/src folder ( #13299 )
2019-03-03 16:50:56 -06:00
Scott Lahteine
d71dc5cf42
Fix for Ender 4 fan/case light pin
...
See #12731
2019-03-03 07:43:27 -06:00
Anthony Rich
7640b328df
Support for Tronxy X5S 2e ( #13297 )
2019-03-03 07:41:05 -06:00
Scott Lahteine
599cdc3f0f
Remove dead code from get_pid_output
...
See #12981
2019-03-03 05:45:20 -06:00
Scott Lahteine
35ae5daf2d
Split up sdcard G-codes
2019-03-03 01:52:15 -06:00
Scott Lahteine
3f36a38512
Clean up some pre-serial-redirect includes
2019-03-03 01:52:15 -06:00
Scott Lahteine
fa0d909dd3
Add FIL_RUNOUT_PIN for BIGTREE_SKR_V1.3
...
See #13267
2019-03-03 00:27:47 -06:00
Ludy
bd4160dbaf
Unused CS_ACTUAL_sb ( #13282 )
2019-03-02 17:30:30 -06:00
Vasily Evseenko
71773b128d
Fix stepper use before init. Add Ultimaker2+ Extended clone config ( #13284 )
2019-03-02 17:29:02 -06:00
Scott Lahteine
edc4e037c4
Add a note to G10
2019-03-02 17:19:36 -06:00
Tobias Frost
57afd0ab37
Fix range check bug in FileList::seek() ( #13286 )
...
When `count()` returns 0, `pos > (count()-1)` will always yield `true` due to integer underflow.
2019-03-02 16:43:08 -06:00
kAdonis
05c2f80826
Fix bug in wait-for-heatup ( #13290 )
2019-03-02 16:29:10 -06:00
Chris Pepper
b0553d2d97
Add M997 support and simple implementation for LPC176x ( #13281 )
2019-03-01 20:11:50 -06:00
Scott Lahteine
fa236e9718
General cleanup ahead of L64XX
2019-03-01 19:58:07 -06:00
Scott Lahteine
2f1e1dcb42
Gradual step towards EXTRUDERS 0 support
2019-03-01 01:51:24 -06:00
Scott Lahteine
99d0022fae
Drop the Z_MIN_PROBE_ENDSTOP option ( #13276 )
2019-03-01 00:27:45 -06:00
Scott Lahteine
9a6b90f47d
TMC2660.h comment tweaks
2019-03-01 00:25:22 -06:00
Scott Lahteine
a2e3226597
Init XYZ to configured home position
2019-02-28 22:10:26 -06:00
Scott Lahteine
4fbbce9a35
Marlin Dev Mode for DOGM status screen
2019-02-28 22:10:26 -06:00
Scott Lahteine
998ce55be0
Alternative fan bitmap
2019-02-28 22:08:20 -06:00
InsanityAutomation
e2e2a55d9b
Add thermistor type 67 SliceEng ( #13275 )
2019-02-28 19:44:17 -06:00
Msq001
5b7ad3a5a0
Fix SKR onboard TF card CS pin ( #13272 )
2019-02-28 19:41:19 -06:00
Scott Lahteine
7fde3ed915
Skip hysteresis check when temp is already close to target
...
To eliminate a long delay during pause, park, and filament change
2019-02-28 14:35:19 -06:00
Chris Pepper
7de6476b3d
Fix binary protocol error
2019-02-28 02:31:42 +00:00
Scott Lahteine
2c10222e87
card.transfer_port => transfer_port_index
2019-02-27 20:14:17 -06:00
Chris Pepper
4ab433d391
Fix binary protocol with one serial port ( #13270 )
...
- The `sdcard.transfer_port` variable is Marlin's internal serial port index, not the physical serial port number.
- Added packet number to "ok" response so hosts don't need to wait for the ACK.
- Renamed feature to `BINARY_FILE_TRANSFER`, as the speed up is only consequential to the ability to transfer binaries over serial.
2019-02-27 19:57:48 -06:00
InsanityAutomation
eb4bf93ea4
Add more Babystep options ( #13262 )
2019-02-27 04:38:56 -06:00
Scott Lahteine
f37df28d17
UBL G29 T current position fix
...
Counterpart to #12845
2019-02-26 22:25:53 -06:00
Msq001
f8a39919fa
Add Bigtree SKR 1.3 board ( #13267 )
...
Co-Authored-By: Msq001 <msq001@users.noreply.github.com>
2019-02-26 21:30:00 -06:00
Bob Kuhn
ddbe4cfa20
Printrboard G2 support ( #13116 )
2019-02-26 21:03:13 -06:00
Scott Lahteine
4200f9ed62
Hide freeMemory et.al. warnings
2019-02-26 18:03:00 -06:00
Scott Lahteine
dc88747770
Fix Due GET_ARRAY_IS_DIGITAL
...
Co-Authored-By: bob-the-kuhn <bob.kuhn@att.net>
2019-02-26 17:49:14 -06:00
Scott Lahteine
a79b9bbe6b
Cleanup whitespace, add a const
2019-02-26 17:49:14 -06:00
Giuliano Zaro
2616e4d4d9
Remove duplicated 'chitchat' defines ( #13258 )
2019-02-25 16:13:01 -06:00
Scott Lahteine
5d28575d4d
Clean up some motion code
2019-02-25 16:01:42 -06:00
Scott Lahteine
808b076000
Update some ABL/UBL conditionals
2019-02-25 16:01:42 -06:00
Scott Lahteine
833c2e54a1
Add an empty flushTX to MarlinSerialUSB_Due
2019-02-25 13:48:14 -06:00
Scott Lahteine
38363902c7
Fix sanity checks for distinct E factor settings
...
Reference #13156
2019-02-25 00:20:36 -06:00
Scott Lahteine
64253e1a58
Followup to serial reform
...
Reference #13250
2019-02-25 00:20:36 -06:00
Minims
92a4984066
Fix G34 probe position ( #13251 )
2019-02-24 13:57:30 -06:00
Scott Lahteine
e15354e387
Simplify serial port redirect ( #13234 )
2019-02-23 22:53:01 -06:00
Chris Pepper
88cc1d1a31
Fix Preprocessor syntax in Re-ARM pins file ( #13247 )
2019-02-24 01:36:58 +00:00
Karl Andersson
76e9ee33aa
Fix include order to make SERIAL_PORT_2 work ( #13241 )
2019-02-23 16:56:09 -06:00
Bruce j Beare
562f2321d2
Fix a G34 bug, allow negative Z corrections ( #13240 )
2019-02-23 02:41:52 -06:00
FernandoVelcic
edf025ed8d
Update Spanish language ( #13236 )
2019-02-23 00:41:02 -06:00
Scott Lahteine
02fec89a0d
Turn fans off in zero_fan_speeds
...
Addressing #13231
2019-02-22 21:00:44 -06:00
Scott Lahteine
15aa932aa6
HAL for Linux ( #13146 )
2019-02-22 19:09:10 -06:00
kwalters3
5eb82ca6a8
Change SSD1306_OLED_I2C_CONTROLLER to HAS_SSD1306_OLED_I2C ( #13223 )
2019-02-22 19:08:36 -06:00
Marcio Teixeira
109e67169c
Define G21 as NOOP w/o INCH_MODE_SUPPORT ( #13229 )
...
Ticket #13228
If `INCH_MODE_SUPPORT` is undefined, G20 is an unknown command as it should be (Marlin is, by default, operating in metric mode). G21, however, is found in many slicers and printer start gcode sections and should be accepted (as a NOOP) to avoid the unknown commands.
2019-02-22 15:35:32 -06:00
AnHardt
31b0be74af
Fix autotemp_factor menu setting ( #13226 )
...
Fix #12643
Only factors above 1 can have a 'positive' effect.
2019-02-22 15:30:17 -06:00
Evgeny-SPB
f6ab62bc13
Fix Creality CR-10 S5 filament change ( #13219 )
2019-02-21 05:40:49 -06:00
Thomas Moore
9f5e4e5ad8
Update LPC1769 Pins Files ( #13183 )
2019-02-21 00:54:05 -06:00
Greg Nutt
608a6810e7
Fix DOGLCD_A0 pin in pins_Smoothieboard.h ( #13217 )
2019-02-20 18:08:49 -06:00
Scott Lahteine
80359c9937
Add more parameters to M240
...
Co-Authored-By: shitcreek <45380455+shitcreek@users.noreply.github.com>
2019-02-20 14:51:36 -06:00
Scott Lahteine
a43e892fb5
Use 8-bit i2c address on LPC platform
...
Fix #9799 — hopefully not a unicorn
2019-02-20 06:27:26 -06:00
Scott Lahteine
631d867dc9
HAL cleanups
2019-02-20 06:27:26 -06:00
Scott Lahteine
89bbc30a09
Fix init of power supply pin
...
Fix #13184
2019-02-20 05:29:05 -06:00
Scott Lahteine
44c22e3935
Provide a default MAX6675_SS_PIN for ReARM
...
See #8010
2019-02-20 05:06:06 -06:00
Scott Lahteine
3c9a7926c2
Fix compile error with JUNCTION_DEVIATION
...
See #13000
2019-02-20 04:54:26 -06:00
Scott Lahteine
758c6c9464
Very minor SPI speedup
2019-02-20 04:36:23 -06:00
Scott Lahteine
422dd6666e
Fix Due EEPROM write bug
...
See #13065
2019-02-20 04:36:23 -06:00
Scott Lahteine
03e109c4a3
FLASH_EEPROM => FLASH_EEPROM_EMULATION
2019-02-20 04:36:23 -06:00
Scott Lahteine
50917ccda6
Tweak some u8g interface code
2019-02-20 04:26:34 -06:00
LinFor
ba39186364
TMC_DEBUG optimization and improvements ( #13135 )
2019-02-20 02:22:42 -06:00
Scott Lahteine
1424b368cf
Tweak M122 comment in configs
2019-02-19 16:20:18 -06:00
Scott Lahteine
3a1b6fe8c1
Coding standards
2019-02-19 14:58:39 -06:00
InsanityAutomation
19af90face
Fix a host action compile error ( #13208 )
2019-02-19 14:47:31 -06:00
Marcio Teixeira
992cdc8d14
Fix host action / G-code ordering in event_probe_failure ( #13207 )
...
Observing from the console, it makes the most sense to do `//action:probe_retry` before executing commands.
2019-02-19 14:45:03 -06:00
InsanityAutomation
33a6d52965
Fix a RAPTOR2 pin conflict ( #13205 )
2019-02-19 14:42:02 -06:00
InsanityAutomation
52665f54ad
Fix bad Purge More logic ( #13193 )
2019-02-19 14:37:18 -06:00
Scott Lahteine
18458ec42b
Error in Smoothieboard for unsupported display
2019-02-19 14:17:33 -06:00
InsanityAutomation
d4ed9b3ef1
Babystep also requires homing ( #13191 )
2019-02-17 14:35:45 -06:00
InsanityAutomation
ca7b2f574f
Fix condition on tool change filament swap menu ( #13190 )
2019-02-17 12:33:46 -06:00
Roman Moravčík
208ab8b366
Fix compilation with one service interval ( #13185 )
2019-02-17 12:32:47 -06:00
Roman Moravčík
567d03a269
Update Slovak language ( #13187 )
2019-02-17 12:29:49 -06:00
Alain Martel
27203c62b8
Enable M240, set photo pins for 3DFabXYZ i3 ( #13174 )
2019-02-15 21:16:39 -06:00
Evgeny-SPB
3025ddf179
Support for Creality CR-10 5S ( #13173 )
2019-02-15 21:09:44 -06:00
Scott Lahteine
e00aad84af
Add M240 parameters D I J R S
2019-02-14 20:00:40 -06:00
Marcio Teixeira
31c240a8db
Enhancements to G425 ( #13159 )
...
- Turn off bed leveling prior to calibrating.
- This prevents lateral probes from having a Z component that
triggers the Z endstop and causes the motion to be aborted.
- Got rid of static const float arrays "dimension" and "true_center"
- Frees up 24 bytes of SRAM
- Changed incorrect use of "bool" for float in backlash macros.
- Replaced arguments with 0.0f and 1.0f for clarity.
- Now only disables soft endstops (since calibration cube is outside of bed)
- Not necessary to disable global endstops
2019-02-14 16:45:31 -06:00
Andy Shaw
84fc400aba
Update BIQU SKR V1.1 pins, add TMC2130 settings ( #13166 )
...
* Remove untested displays add TMC2130 configs.
* Remove references to the ReARM, delete untested displays. Add TMC2130 settings. Cleanup spacing, etc.
2019-02-14 16:43:56 -06:00
Scott Lahteine
ab2816c870
Patch for M240
2019-02-14 15:13:57 -06:00
Scott Lahteine
d2bdb71c13
Add PHOTO_GCODE option, photo trigger physical move ( #13168 )
2019-02-14 15:09:35 -06:00
Scott Lahteine
be9a409980
Fix M125 XY parameters, export get_homing_bump_feedrate
2019-02-14 05:25:46 -06:00
Scott Lahteine
ce40c2e87c
Use do_blocking_move_to(ref, fr)
2019-02-14 02:22:08 -06:00
Giuliano Zaro
bdc2f10b90
Update Italian language, fix unused var warning ( #13164 )
2019-02-13 21:05:18 -06:00
Marcio Teixeira
9f0e1834ec
Followup to #13039 ( #13163 )
...
- Fix compile error when accessing `process_subcommands_now_P`.
- Use `const` var eliminating double-negative (to make code more understandable).
2019-02-13 20:39:38 -06:00
Ludy
1ace97e946
[2.0.x] Update German language ( #13150 )
2019-02-13 20:31:50 -06:00
Scott Lahteine
7cf9b93f26
Add HAS_FILAMENT_SENSOR ahead of 12962
2019-02-12 20:13:20 -06:00
Giuliano Zaro
2c8d12d3ec
Update Italian language ( #13148 )
2019-02-12 18:40:34 -06:00
Scott Lahteine
c2b90c44e4
Prettify some code comments
2019-02-12 17:43:37 -06:00
Scott Lahteine
a0dadc8c62
Smaller I2CPositionEncoder strings
2019-02-12 16:21:56 -06:00
Scott Lahteine
18996d2595
Fix some spelling
2019-02-12 16:21:56 -06:00
revilor
e56c13670d
Service interval watchdog ( #13105 )
2019-02-12 15:58:56 -06:00
InsanityAutomation
7f1b69b0c8
Add HOST_PROMPT_SUPPORT ( #13039 )
2019-02-12 15:55:47 -06:00
Scott Lahteine
0feeef2604
Update copyright in headers
2019-02-12 15:30:11 -06:00
Scott Lahteine
894f5c24a8
Fix trailing whitespace
2019-02-12 14:25:57 -06:00
Roman Moravčík
bace52afd7
Fixed compilation with MMU2_MENUS disabled ( #13140 )
2019-02-12 12:55:49 -06:00
Ludy
584f9cd449
Update German language ( #13137 )
2019-02-12 12:54:57 -06:00
Scott Lahteine
d9a3fea022
Comments in HAL_spi_STM32F1.cpp
2019-02-11 18:06:33 -06:00
Giuliano Zaro
773fa5c40f
Fix define used when PID is off ( #13119 )
...
Replaced `PID_MAX` with `BANG_MAX` since it should be the correct define to be used when PID is not enabled.
2019-02-11 17:29:17 -06:00
Giuliano Zaro
f7efe6f6c5
[2.0.x] Fix TEMP_STAT_LED startup init ( #13120 )
2019-02-11 17:27:59 -06:00
Ludy
2bd6ce4b62
Update German language ( #13125 )
2019-02-11 17:08:21 -06:00
Giuliano Zaro
27115ff7eb
Update Italian language ( #13123 )
...
Incomplete.
2019-02-11 17:07:21 -06:00
Roman Moravčík
08a8bd10ca
Updated Slovak translation ( #13122 )
2019-02-11 17:06:10 -06:00
Scott Lahteine
3e2a4c3b26
Show mixer and temperature menus while printing
2019-02-11 16:52:47 -06:00
Scott Lahteine
8d271f20fe
C10mini E steps of 95
...
See https://www.patreon.com/posts/creality-cr10-24602624
2019-02-10 14:23:05 -06:00
Scott Lahteine
9737608f0a
Enable gradient when alias is cleared
2019-02-10 06:39:12 -06:00
Simon Jouet
5cd0fa3ce1
Basic GPIO expander using the ESP32 I2S peripheral ( #12959 )
2019-02-10 05:40:31 -06:00
Scott Lahteine
3983cacbcf
No extern needed for func decl
2019-02-10 05:38:27 -06:00
Scott Lahteine
43b29c093b
Update pinsDebug_list.h with XY PWM pins
2019-02-10 05:13:05 -06:00
Scott Lahteine
166e567ab8
Fix HAS_MOTOR_CURRENT_PWM
2019-02-10 05:06:46 -06:00
Scott Lahteine
6de3d34378
M166 Gradients, LCD Menu for 2-channel Mixer (Geeetech A10M/A20M) ( #13022 )
2019-02-10 04:54:23 -06:00
LinFor
7ee35c2611
PID_MENU option to save PROGMEM in LCD menus ( #13095 )
2019-02-10 04:03:18 -06:00
Ludy
936f982392
Update German Language ( #13110 )
2019-02-10 03:55:08 -06:00
AnHardt
0e37fe8776
Apply minimum C in M303 ( #13113 )
...
Apply minimum `C` in `M303`. `PID_autotune()` needs to be called with a 'C'ycles-parameter >2 to give meaningful (different from 0) PID-factors. Therefore silently raise C to 3. Fixing one aspect of #13104
2019-02-10 03:54:45 -06:00
Scott Lahteine
5a316664e5
Update chopper timing
2019-02-10 03:12:20 -06:00
Scott Lahteine
fcb16ceb29
Update default config
2019-02-10 00:20:11 -06:00
Alain Martel
9ae7cca5e9
Disable RGB_LED for 3DFabXYZ ( #13097 )
2019-02-08 15:18:20 -06:00
Scott Lahteine
f3b6cb4d34
Clean up, update config comments
2019-02-08 15:13:52 -06:00
Scott Lahteine
ae03753ef1
Fix PCA9533 with PRINTER_EVENT_LEDS
2019-02-08 15:13:52 -06:00
Scott Lahteine
95d3f3953a
DEFAULT_WEBSITE_URL => BOARD_WEBSITE_URL
2019-02-08 14:54:34 -06:00
Scott Lahteine
6ddd81c178
[2.0.x] Update German Language ( #13100 )
...
add MMU2
2019-02-08 14:25:24 -06:00
Giuliano Zaro
7c9ff322f3
Update Italian language ( #13099 )
2019-02-08 14:23:37 -06:00
Ludy
ce8cb6a5d9
[2.0.x] Update German Language
...
add MMU2
2019-02-07 20:04:34 +01:00
Scott Lahteine
f269766408
Put the MMU2 menu with the others
2019-02-06 17:38:46 -06:00
Marcio Teixeira
e1604198ff
G425 — Auto-calibrate Backlash and Nozzle Offsets ( #13050 )
2019-02-06 17:20:17 -06:00
Marcio Teixeira
113af46a1b
Add ExtUI methods to babystep probe/nozzle offsets ( #12590 )
2019-02-06 07:16:54 -06:00
InsanityAutomation
413e303ad5
More Advanced Pause options ( #12984 )
2019-02-06 06:39:42 -06:00
Mark Zachmann
19cf72e057
Support individual solenoid disable with M381 ( #13008 )
2019-02-06 06:34:53 -06:00
teemuatlut
d81342254a
Support new TMC drivers ( #13026 )
2019-02-06 06:33:14 -06:00
Scott Lahteine
e1587da228
Clean up HAL_spi_Due.cpp ( #13087 )
2019-02-06 06:31:31 -06:00
Rolf Werum
524c6c10bf
MAGNETIC_PARKING_EXTRUDER ( #12351 )
2019-02-06 06:30:53 -06:00
Scott Lahteine
1bd9a63049
Add HAS_EXTRA_ENDSTOPS macro
2019-02-06 05:10:05 -06:00
Scott Lahteine
3c49396370
Fix compile error with DUE + MAX6675 ( #13086 )
2019-02-05 22:56:13 -06:00
Roxy-3D
ab6908a513
Fix Probe Offset bug...
2019-02-05 20:30:20 -07:00
revilor
69aaf5d096
MMU2 fixes ( #13082 )
2019-02-05 20:56:22 -06:00
Scott Lahteine
2f8e89adc3
Remove extraneous ui. prefixes
2019-02-05 19:04:37 -06:00
Scott Lahteine
870757aa17
Tweaks to pins_GT2560_V3.h
2019-02-04 22:52:50 -06:00
Scott Lahteine
b96cc30cd0
HAL spacing tweak
2019-02-04 21:51:06 -06:00
Scott Lahteine
9e394139e5
Followup to 90911104
2019-02-04 10:46:52 -06:00
Sam Lane
b35a7c2c87
Fixed closed-loop planner stall ( #13005 )
2019-02-04 07:43:09 -06:00
Ludy
691e925adc
Update German language ( #13012 )
2019-02-04 07:25:07 -06:00
Scott Lahteine
1497fb388a
M29 match logic was reversed ( #13013 )
...
* M29 logic was reversed
If in card-saving mode generate errors line errors for anything that's *NOT* "M29 ?"
* Update queue.cpp
* Update queue.cpp
2019-02-04 07:23:42 -06:00
Scott Lahteine
b5fd2fb58b
Allow M29 to be processed late
2019-02-04 07:23:02 -06:00
Scott Lahteine
c03bac9ad4
Update queue.cpp
2019-02-04 07:17:40 -06:00
Scott Lahteine
a49f0205ea
Update queue.cpp
2019-02-04 07:11:08 -06:00
Andy Shaw
9091110460
LPC1768 - Don't change CS pin state ( #13015 )
2019-02-04 07:08:39 -06:00
Scott Lahteine
10d855cb21
Sanity check USER_GCODE formatting
2019-02-04 06:36:41 -06:00
Scott Lahteine
d97bb4c41c
Followup to e10943d0
2019-02-04 06:11:31 -06:00
jeffstaley
2f176d6fb8
Flush RX buffer on G-code line errors to prevent hang ( #13018 )
2019-02-04 06:03:49 -06:00
Scott Lahteine
ca73b2f465
Add static assert to catch errors in COPY(a,b)
2019-02-04 05:52:32 -06:00
Nathan
df1043516e
Fix the delta homing issue ( #12974 )
2019-02-04 05:25:50 -06:00
Scott Lahteine
4200bd2fc1
Report on M92 with no arguments ( #12833 )
2019-02-04 05:24:15 -06:00
Scott Lahteine
e10943d0d8
Minor tweak to main menu
2019-02-04 04:58:31 -06:00
Scott Lahteine
d4d1b28a06
Fix some include paths
2019-02-04 03:57:15 -06:00
Scott Lahteine
0d720a6ff4
Tweak to emergency_parser.h
2019-02-04 03:56:56 -06:00
Scott Lahteine
0a7ea7063f
Hide Resume Print when not relevant
2019-02-04 03:02:44 -06:00
Scott Lahteine
afe79ba22b
Minor code cleanup
2019-02-04 02:23:06 -06:00
Scott Lahteine
fdb97a3e9c
Add class and macro to save and auto-restore a variable
2019-02-04 02:23:06 -06:00
Scott Lahteine
433518de74
Prevent M420 error from disconnecting OctoPrint
...
Just echo the error instead of labeling it `Error:`.
2019-02-04 01:54:43 -06:00
Marcio Teixeira
5cfc1cdacc
Support SWITCHING_NOZZLE with 2 servos ( #13054 )
2019-02-04 00:19:56 -06:00
Psycho
3c88cac2e9
Velleman Vertex Delta pins ( #13072 )
2019-02-04 00:15:08 -06:00
Nicolas G
6fb4001b58
Add option to disable fan speed slowing in M303 ( #13066 )
2019-02-04 00:12:41 -06:00
Scott Lahteine
ca1be02bf0
Tweak some pins formatting
2019-02-04 00:06:41 -06:00
Scott Lahteine
38c2ca9281
Clean up trailing whitespace
2019-02-03 23:00:57 -06:00
Mark Zachmann
4d1093b386
Fix init of last_direction_bits ( #13067 )
2019-02-03 01:29:00 -06:00
Scott Lahteine
4fa1c52688
Tweak serial output code
2019-02-03 01:09:14 -06:00
Scott Lahteine
a5e3384691
Pre-apply cosmetic changes to mixing
2019-02-03 01:09:14 -06:00
Scott Lahteine
0358ffcd4c
Drop E element from homing_feedrate_mm_s
2019-02-02 15:55:00 -06:00
Scott Lahteine
95223cb28e
Remove dead code from stepper.h
...
These values are always supplied by `Conditionals_post.h`.
2019-02-02 15:35:05 -06:00
mattfredwill
c3cb449990
TMC2130 dual-stepper Sensorless Homing ( #13061 )
2019-02-01 18:09:01 -06:00
Marcio Teixeira
f6edd2c472
Move stepper settings to "Advanced Settings" menu ( #13063 )
2019-02-01 18:07:04 -06:00
InsanityAutomation
68bbac207e
Update pins_FORMBOT_TREX3.h ( #13058 )
2019-02-01 18:06:02 -06:00
revilor
6a57d0b381
Prusa MMU2 ( #12967 )
2019-01-31 19:10:52 -06:00
Scott Lahteine
996f7d1642
Fix I2C_POSITION_ENCODERS commentary
2019-01-30 22:17:17 -06:00
raTmole
988b5aa4e6
Update GT2560 V3 pins ( #13036 )
2019-01-30 21:10:56 -06:00
InsanityAutomation
7d927b6691
Move Z Probe Z Offset from Advanced to basic Configuration ( #13056 )
2019-01-30 21:08:36 -06:00
Giuliano Zaro
31e213e427
Always show Tune sub-menu ( #13049 )
2019-01-30 21:05:55 -06:00
teemuatlut
f0503372d9
Revert E_AXIS_N cast ( #13055 )
2019-01-30 20:55:05 -06:00
InsanityAutomation
a1d03fe7ba
Fix single nozzle fan ( #13038 )
2019-01-30 20:54:04 -06:00
Scott Lahteine
159d7eefda
New boards entry for the A20M
2019-01-28 21:08:20 -06:00
Scott Lahteine
97da6c1da5
Use MIN/MAX for min/max
2019-01-28 20:36:13 -06:00
Scott Lahteine
17a8c37148
Label menu edit items
2019-01-28 20:20:46 -06:00
raTmole
ddeca7a358
Fix resume from power loss G-Code. ( #13035 )
2019-01-28 13:19:26 -06:00
Thomas Moore
02ab66fca3
Update Cohesion3D Pins Files ( #13027 )
2019-01-27 23:11:33 -06:00
Giuliano Zaro
a79d80c78e
Minor cleanup of pause code ( #13030 )
2019-01-27 23:10:25 -06:00
jeffstaley
0da636e1a3
Set correct stepper direction on reset ( #13032 )
...
On a reset steppers were being initialized to incorrect direction. Original code wasn't respecting `INVERT_Z_DIR` define.
2019-01-27 23:02:38 -06:00
Scott Lahteine
3845baf398
Followup to #12982
2019-01-27 22:53:46 -06:00
InsanityAutomation
48a3502656
Remote streamer improvements ( #12982 )
2019-01-27 22:43:13 -06:00
Scott Lahteine
621fbe99de
Followup to #12817
2019-01-27 20:48:58 -06:00
Marcio Teixeira
f214118e45
Action to notify host of filament runout. ( #12817 )
2019-01-27 20:18:05 -06:00
Scott Lahteine
aad770bce8
Bring default configs in sync
2019-01-26 16:44:42 -06:00
jeffstaley
3f91233f6d
M29 logic was reversed
...
If in card-saving mode generate errors line errors for anything that's *NOT* "M29 ?"
2019-01-25 07:36:52 -08:00
jeffstaley
0e0cc13650
Fix M29 for Pronterface SD card upload ( #13010 )
2019-01-24 21:10:59 -06:00
Jiri
24fffb8d93
Fix undefined lcd_tmpfan_speed on NO_LCD_MENUS ( #13006 )
2019-01-24 16:34:40 -06:00
Scott Lahteine
8f9b246d0e
Tweak some formatting, replace tabs
2019-01-24 13:18:56 -06:00
Bo Herrmannsen
808df82b36
Support for Anycubic I3 ( #12972 )
2019-01-24 12:40:49 -06:00
Scott Lahteine
ae91914260
Prevent name conflicts with mixed stepper drivers
2019-01-24 01:25:28 -06:00
Scott Lahteine
0eca236dcd
Fix L6470 config comments
2019-01-24 00:58:16 -06:00
InsanityAutomation
f4d1f13358
Warn on cold extrusion, dont error
2019-01-24 00:16:14 -06:00
Scott Lahteine
aa74a900f5
Bring Rostock 301 and ArmEd configs up to date
2019-01-23 23:37:37 -06:00
Scott Lahteine
0f07ba4f09
Tweak some comments
2019-01-23 20:18:13 -06:00
Scott Lahteine
00cdd41b5f
Clean up for recent changes
2019-01-23 20:08:58 -06:00
Roman Moravčík
7d53b79596
Update Slovak translation ( #12991 )
2019-01-23 19:48:16 -06:00
Giuliano Zaro
18c32996c1
[2.0.x] Updated Italian language ( #12997 )
2019-01-23 19:35:42 -06:00
Bob Kuhn
7c1a5e3c47
Fix TEMP_TIMER in pins_STEVAL.h ( #12994 )
2019-01-23 19:34:39 -06:00
Scott Lahteine
b4994ad12e
Update language_it.h
2019-01-23 19:28:57 -06:00
Bob Kuhn
2f35747f29
L6470 SPI daisy chain support ( #12895 )
2019-01-23 19:06:54 -06:00
Scott Lahteine
6453b82a5e
Clean up trailing whitespace
2019-01-23 15:57:01 -06:00
Scott Lahteine
48a581ba2e
Tweak some HAL Due code
2019-01-23 00:53:20 -06:00
Marcio Teixeira
54fdf57b8c
ExtUI: Fix fan wrapping around from 0 to 100 ( #12987 )
2019-01-22 23:33:10 -06:00
InsanityAutomation
dbe4126e07
Update language_en.h ( #12988 )
2019-01-22 23:32:01 -06:00
teemuatlut
e5801b75f8
Fix TMC-related compile issues. ( #12971 )
...
- `STEALTHOP_[XYZE]` configuration options now set the default state.
2019-01-20 23:54:57 -06:00
Gert-Jan Rodenburg
bb30927549
Fix pins for ZONESTAR_LCD with Zonestar ZRIB ( #12956 )
2019-01-20 23:52:51 -06:00
Ludy
dc65d96aca
Fix TMC compile error ( #12965 )
2019-01-20 23:47:28 -06:00
InsanityAutomation
a1cf49935d
Add laser control menu ( #12883 )
2019-01-20 23:41:47 -06:00
InsanityAutomation
75f2665f2e
LCD SD Card items near top when not using wheel ( #12926 )
2019-01-20 23:24:53 -06:00
Scott Lahteine
e1f951813a
Remove old block end comment
2019-01-20 02:30:03 -06:00
Scott Lahteine
52108192d1
Prevent L6470 class name conflict with drivers.h define
...
Fix #12824
2019-01-20 00:32:56 -06:00
Scott Lahteine
0495fcd475
Minor spacing fix
2019-01-20 00:10:50 -06:00
lanserge
c2cf8ffa82
Add support for Arduino DUE Shield Kit ( #12950 )
2019-01-19 23:43:32 -06:00
Scott Lahteine
4e5a915ef8
Fix some Makefile comments
2019-01-19 23:41:30 -06:00
Scott Lahteine
a5911765c3
Tweak some spacing
2019-01-19 20:27:57 -06:00
chrisly42
99e5e8362f
Rapide Lite 200 config, pins_RL200 RUMBA clone ( #12848 )
2019-01-19 20:19:14 -06:00
Scott Lahteine
6411680364
Update some pins spacing
2019-01-19 19:21:52 -06:00
teemuatlut
8a3f1d6932
Fix chopper timing struct and initialization ( #12943 )
2019-01-19 18:57:02 -06:00
Ludy
c6991109b7
Update German language ( #12953 )
2019-01-19 18:50:24 -06:00
Giuliano Zaro
ca9eb14f6a
Update Italian language ( #12951 )
2019-01-19 18:48:13 -06:00
Ludy
acf266fe78
Fix a compile warning, etc. ( #12955 )
2019-01-19 18:47:29 -06:00
Scott Lahteine
424aa05cc2
Fix some file endings
2019-01-19 18:19:12 -06:00
Scott Lahteine
ce563d7c2e
Various general cleanups
...
Mostly from the L6470-oriented PR
2019-01-19 16:56:12 -06:00
Scott Lahteine
02cc63d6d4
Update CreatorPro Configuration_adv.h
2019-01-19 16:37:50 -06:00
Marcio Teixeira
f4c16e683b
Follow up fixes to #12884 ( #12940 )
2019-01-17 18:48:29 -06:00
Scott Lahteine
712e23c383
Fix up some whitespace
2019-01-17 18:05:36 -06:00
Ziemowit
20c20dacb7
MKS SBASE needs DRV8825 ( #12911 )
2019-01-17 13:21:53 -06:00
Giuliano Zaro
7bb5d4bfe8
Small LED code reorganization ( #12929 )
2019-01-17 13:20:26 -06:00
teemuatlut
e6805582a6
M569 to change stepping mode. Add new TMC section to LCD. ( #12884 )
2019-01-17 13:17:16 -06:00
Bob Kuhn
d08f27e27b
Add support for STEVAL 3DP001V1 ( #12894 )
2019-01-15 18:59:36 -06:00
Alain Martel
cdb562d558
Bring Migbot config up to date ( #12916 )
2019-01-15 18:53:07 -06:00
Giuliano Zaro
8f4c6e6d1a
Fix case light on boot ( #12919 )
2019-01-15 18:50:56 -06:00
Marcio Teixeira
f11c6d5d02
Fix M107 when dual-nozzles share fan ( #12819 ) ( #12909 )
2019-01-15 18:45:18 -06:00
Karl Andersson
64a4649290
STM32 - Fix SD write ( #12897 )
2019-01-15 18:44:22 -06:00
Ludy
294521439e
Clean up Configuration_adv.h ( #12900 )
2019-01-15 18:42:10 -06:00
InsanityAutomation
59b18aaeef
Allow resume from pause with parking enabled ( #12893 )
...
Currently, Pause of an SD-Memory card print does not work. This has been verified to resolve the issue by multiple people.
I understand more work needs to be done to resolve some of the concerns...
2019-01-15 07:58:54 -07:00
Giuliano Zaro
85f149befe
Save some progmem ( #12913 )
2019-01-14 20:56:30 -06:00
mikeshub
7fde8d9d1e
Add CreatorPro / Makerbot / QIDI / etc and Mightboard RevE support ( #12855 )
...
- Fix a bug in MAXxxxx thermocouple temp reporting.
- Add support for 3-wire HD44780.
- Add support for PCA9533 RGB driver.
- Add configuration examples for FlashForge CreatorPro.
2019-01-14 14:29:55 -06:00
Scott Lahteine
3644c940bf
Tweak SD section of Main Menu
2019-01-13 18:00:07 -06:00
teemuatlut
1a79878dff
Remove TMC_Z_CALIBRATION in favor of Z_STEPPER_AUTO_ALIGN
2019-01-12 18:07:28 -06:00
Scott Lahteine
7cfce20cd3
Update comments on M125
2019-01-12 17:52:44 -06:00
Jason
dc4786a504
Config files for PowerWASP Printer ( #12889 )
2019-01-12 16:57:45 -06:00
Scott Lahteine
3e867008f0
Fix some HAL_STM32F1 type declarations
2019-01-12 16:21:11 -06:00
Scott Lahteine
eb78aed863
Rename LCD menus according to variable types ( #12892 )
2019-01-12 16:01:04 -06:00
InsanityAutomation
ed3ab5e212
Fix M24 not starting new job ( #12887 )
2019-01-12 15:30:44 -06:00
Nils Hasenbanck
f9299c4461
Make timer definition in pin files for STM32 possible ( #12874 )
...
RemRam needs to redefine a particular timer to work correctly. The HAL did foresee this possibility and checks if the timer was already defined for either the stepper or temperature timer.
Prior to this commit the header file for the timers couldn't see those definitions in the pin file, but this commit will fix this.
Tested on an actual hardware to verify. (It wouldn't boot without it.)
2019-01-12 14:40:49 -06:00
InsanityAutomation
082f6a27de
ADAPTIVE_FAN_SLOWING extension to hotend thermal protection ( #12853 )
2019-01-12 00:41:48 -06:00
Scott Lahteine
459f4fef60
Fix Temperature::init bug with HEATER_4_PIN
2019-01-11 22:54:26 -06:00
InsanityAutomation
a403d9a50c
Improve menu pause / resume ( #12876 )
2019-01-11 20:42:11 -06:00
Alain Martel
432c21456f
Add 3DFabXYZ Migbot example config ( #12775 )
...
Co-Authored-By: Alain Martel <alain74martel@gmail.com>
2019-01-11 20:41:20 -06:00
Scott Lahteine
fb8111553e
getStatus => report_status
2019-01-11 19:51:00 -06:00
Chris Pepper
2919f3045d
[LPC176x] Update PIO extrascript ( #12878 )
2019-01-11 19:45:33 -06:00
Scott Lahteine
19fea772e5
Use E_AXIS_N where it makes sense
2019-01-11 19:42:34 -06:00
Scott Lahteine
0d30ccf767
Tweaks to TMC26XStepper
2019-01-11 19:42:34 -06:00
HackingGulliver
1fd8e2c649
Fix: Junction Deviation calculates wrong cos(theta) on CoreXY ( #12879 )
2019-01-11 19:25:48 -06:00
Scott Lahteine
b402040059
Split bed size sanity check into two
2019-01-11 15:49:57 -06:00
Chris Barr
1d33784bf9
Add RUMBA32 Board ( #12856 )
2019-01-10 19:34:31 -06:00
Ondřej Nový
a0ef6198ff
Level bed corners Z-hop height option ( #12858 )
2019-01-10 19:15:17 -06:00
Karl Andersson
8ae6f1e556
Fix errors and some compiler warnings with HAL_STM32 PlatformIO build ( #12869 )
2019-01-10 19:01:31 -06:00
Scott Lahteine
e6484d9dab
Return to status when SD card is removed
2019-01-10 15:43:31 -06:00
Scott Lahteine
5f2d75f45b
Move PINS_DEBUGGING to @section develop
2019-01-08 20:05:05 -06:00
Scott Lahteine
da42f27c9e
Use maths macros for ceil/floor
2019-01-05 21:21:02 -06:00
Ludy
de4561c980
VORON Add LCD option BEEP_ON_FEEDRATE_CHANGE ( #12822 )
2019-01-05 14:12:05 -06:00
Giuliano Zaro
709a6356f7
Remove obsolete test conditions ( #12829 )
2019-01-05 14:02:45 -06:00
Luu Lac
bcf347403b
Fix M106 extruder & fan count ( #12820 )
2019-01-05 14:01:35 -06:00
Kaushik Vemparala
ba7e35cbab
Add LCD option BEEP_ON_FEEDRATE_CHANGE ( #12774 )
2019-01-04 19:30:08 -06:00
jmz52
d372e7e477
SDIO support for STM32F1 ( #12782 )
2019-01-04 13:38:07 -06:00
Marcio Teixeira
6a8fb0f25f
Simplify backlash compensation code. ( #12813 )
...
- Use `TEST(dm,axis)` to determine directions instead of doing comparisons.
- Remove recomputation of `millimeters` and `delta_mm` since backlash compensation should not affect the distance over which material is extruded.
2019-01-04 13:30:56 -06:00
luxflow
7f244f9b9c
Update LPC SD pins for BIQU SKR ( #12767 )
...
(Exactly matching the Azteeg X5 MINI Wifi)
2019-01-03 10:44:00 -06:00
jmz52
813a4ea107
Add support for Mks Robin TFT display ( #12706 )
...
* Add support for MKS Robin TFT display
- Add support for MKS Robin TFT display and encoder for MKS Robin board.
- Generic 128x64 UI with x2 upscale is used (for now).
- Tested on MKS Robin TFT V2.0 with ST7789V controller.
2019-01-03 10:38:39 -06:00
jmz52
c4237b529f
Fix MKS Mini and SD card conflct over SPI mode ( #12783 )
2019-01-03 10:27:53 -06:00
Phr3d13
01f75591c6
Fix GTM32_PRO_VB Serial and HAL via watchdog ( #12753 )
...
Move `watchdog_reset` from `.h` to `.cpp` to eliminate the need to include `MarlinConfig.h` in a HAL-related file.
2019-01-03 09:46:49 -06:00
Scott Lahteine
288340cb6c
Followup to VORON
2019-01-03 09:14:14 -06:00
Scott Lahteine
2aaa681dea
Remove unused Cheaptronic pins
2019-01-03 08:58:55 -06:00
Marcio Teixeira
81e753064a
Fix ExtUI compile warnings and error ( #12799 )
2019-01-03 08:36:43 -06:00
Ludy
74c47803f7
Add VORON printer ( #12705 )
2019-01-03 06:27:03 -06:00
kAdonis
637fb20c75
Allow 4 fan animation frames ( #12772 )
2019-01-03 06:03:06 -06:00
petieken
d9cf5e4883
Update pins_BIQU_SKR_V1.1.h ( #12758 )
2019-01-02 13:50:05 -06:00
TheLongAndOnly
cb643d87df
Adding missing code for triple Z-stepper auto-align ( #12786 )
2019-01-01 18:22:04 -06:00
Ludy
14a7faf087
Fix compile warning comparison uint and int ( #12788 )
2019-01-01 18:20:12 -06:00
Marcio Teixeira
60cb36bef3
Misc. improvements ( #12747 )
...
* Make ExtUI respect MAXTEMP limits
- Temperatures are now clamped by MAXTEMP limits rather than arbitrary values.
* Speed up USB init, add status
- Speed up USB initialization
- Show status message if init failed
* Enable status messages for EXTENSIBLE_UI
* Adjust max limit to MAX_TEMP - 15
* Misc. tweaks to formatting, const, etc.
2019-01-01 15:17:48 -06:00
InsanityAutomation
4f2473053c
Fix M106 with SINGLENOZZLE
2018-12-31 20:10:18 -06:00
Reece Kibble
7557f8d68c
Rename all Stm32f1 to STM32F1 ( #12639 )
2018-12-31 16:36:49 -06:00
Scott Lahteine
371d9a1acf
Fix line-endings, formatting, whitespace
...
Followup to #12770
2018-12-30 15:38:20 -06:00
Ludy
135c74017c
Fix compile DEBUG_EEPROM_READWRITE error ( #12746 )
2018-12-30 11:37:20 -06:00
Giuliano Zaro
54ba44ee37
Fix bad sanitycheck ( #12748 )
2018-12-30 10:44:15 -06:00
swilkens
b01a630bd0
[2.0.x] Correct Ender 3 bed size ( #12769 )
2018-12-30 10:42:47 -06:00
Alain Martel
44ed34475b
Add MKS BASE 1.4 pins ( #12770 )
2018-12-30 10:40:22 -06:00
Roxy-3D
3a16cb6d7f
Slightly Slower Max X Axis speed
...
On some T-Rex 2+ machines the previous max step rate could lose steps....
2018-12-28 09:14:48 -06:00
Ludy
814d93c7cf
Fix G33 sprintf output warning ( #12738 )
2018-12-27 18:05:42 -06:00
Ludy
3877bf9704
Fix compile error with delta and sensorless homing ( #12740 )
2018-12-27 17:51:22 -06:00
Ludy
cfc5e96b4b
Move JD to Config.h (and fix jerk->eeprom bug) ( #12720 )
2018-12-27 15:29:39 -06:00
Roman Moravčík
594898aea7
Limit hotend / bed temperature to maxtemp-15 ( #12713 )
2018-12-27 11:46:05 -06:00
InsanityAutomation
530ef5846f
Make nomove=false for toolchange on filament swap ( #12739 )
2018-12-27 11:38:35 -06:00
InsanityAutomation
14ddda285c
Confirmation on Abort SD print ( #12717 )
2018-12-27 11:36:39 -06:00
Msq001
f8c5d31864
Bugfix 2.0.x add motherboard pins define ( #12689 )
...
- `pins_BIQU_B300_V1.0.h` defines pins for B300, as found in the BIQU Thunder 3D printer.
- `pins_BIQU_SKR_V1.1.h` defines pins for bigtree/BIQU SKR V1.1 motherboard.
2018-12-27 10:52:35 -06:00
InsanityAutomation
b7a8dcc35d
Update Formbot T-Rex 3 pins ( #12662 )
2018-12-20 17:32:39 -06:00
Ludy
f7127c44f8
Wanhao Duplicator i3 Plus pins create ( #12701 )
2018-12-20 17:30:36 -06:00
jmz52
33abb86b7e
Add support for MKS Robin board ( #12650 )
...
Implement initial support for MKS Robin (STM32F103ZET6) board.
Custom build script is used to generate encrypted firmware compatible with original MSK Robin bootloader (i.e. safe firmware update from SD card and possibility to go back to original close-source firmware).
2018-12-20 17:23:27 -06:00
InsanityAutomation
367a9f65aa
Add Formbot 350c Thermistor ( #12661 )
2018-12-20 17:04:17 -06:00
Ludy
33f3c75213
GTM32 Pro VB FAN-PIN correction ( #12666 )
2018-12-20 16:42:15 -06:00
Scott Lahteine
9d59a9c840
Followup to #12691 (typo)
2018-12-20 16:38:32 -06:00
Ludy
3829d6ccf8
FYSETC F6 13 - E2_SERIAL_TX_PIN correction ( #12667 )
2018-12-20 16:11:33 -06:00
Kadah
d35dcafa3d
Added MKS MINI 12864 support to FYSETC F6 V1.3 ( #12656 )
2018-12-20 16:10:49 -06:00
Roman Moravčík
98cf546771
Limit set hotend temperature to maxtemp. ( #12690 )
2018-12-20 15:56:37 -06:00
Roman Moravčík
4dad489a50
[2.0.x] Limit PID autotune target to maxtemp-15 ( #12691 )
2018-12-20 15:55:30 -06:00
Marcio Teixeira
8dcc28c9ae
Squelch warning mentioned in #11061 ( #12676 )
2018-12-20 15:34:24 -06:00
Ondřej Nový
4c8a6eee7b
[2.0.x] Update Czech translation ( #12683 )
2018-12-20 15:28:46 -06:00
Ondřej Nový
fcaed685b2
[2.0.x] Set DEFAULT_NOMINAL_FILAMENT_DIA to 1.75 in Anet A6 config ( #12664 )
2018-12-18 13:35:59 -06:00
Ondřej Nový
0572be9439
[2.0.x] Enable PIDTEMPBED in Anet A8 example config ( #12655 )
2018-12-18 13:34:46 -06:00
Luc Van Daele
c6e09c2689
[2.0.x] G33 clean up ( #12648 )
...
Remove obsolete workarounds in G33 for the now fixed zprobe_zoffset bug
2018-12-18 12:43:38 -06:00
teemuatlut
7a5e637a37
Add spreadCycle parameter sets ( #12645 )
2018-12-18 12:42:14 -06:00
Marcio Teixeira
902d5b0f8b
Allow ExtUI to use LCD_SET_PROGRESS_MANUALLY ( #12628 )
2018-12-12 17:21:37 -06:00
Dave Johnson
9a4a463ec4
Sanity-check LIGHTWEIGHT_UI, move comment up ( #12630 )
2018-12-12 16:59:20 -06:00
teemuatlut
55144284c2
TMC connection test, spreadCycle parameters, improved debugging ( #12616 )
2018-12-09 20:54:48 -06:00
Ludy
97de9d54a5
Fix broken pins file include ( #12617 )
2018-12-09 19:06:03 -06:00
Ludy
a7b3a61424
Improve some config comments readability ( #12615 )
2018-12-09 19:02:42 -06:00
Scott Lahteine
daf07e4200
Align classic bed icon consistently
2018-12-09 12:00:10 -06:00
