muele-marlin

Author	SHA1	Message	Date
jeffstaley	0e0cc13650	Fix M29 for Pronterface SD card upload (#13010 )	2019-01-24 21:10:59 -06:00
Jiri	24fffb8d93	Fix undefined lcd_tmpfan_speed on NO_LCD_MENUS (#13006 )	2019-01-24 16:34:40 -06:00
Scott Lahteine	8f9b246d0e	Tweak some formatting, replace tabs	2019-01-24 13:18:56 -06:00
Bo Herrmannsen	808df82b36	Support for Anycubic I3 (#12972 )	2019-01-24 12:40:49 -06:00
Scott Lahteine	ae91914260	Prevent name conflicts with mixed stepper drivers	2019-01-24 01:25:28 -06:00
Scott Lahteine	0eca236dcd	Fix L6470 config comments	2019-01-24 00:58:16 -06:00
InsanityAutomation	f4d1f13358	Warn on cold extrusion, dont error	2019-01-24 00:16:14 -06:00
Scott Lahteine	aa74a900f5	Bring Rostock 301 and ArmEd configs up to date	2019-01-23 23:37:37 -06:00
Scott Lahteine	0f07ba4f09	Tweak some comments	2019-01-23 20:18:13 -06:00
Scott Lahteine	00cdd41b5f	Clean up for recent changes	2019-01-23 20:08:58 -06:00
Roman Moravčík	7d53b79596	Update Slovak translation (#12991 )	2019-01-23 19:48:16 -06:00
Giuliano Zaro	18c32996c1	[2.0.x] Updated Italian language (#12997 )	2019-01-23 19:35:42 -06:00
Bob Kuhn	7c1a5e3c47	Fix TEMP_TIMER in pins_STEVAL.h (#12994 )	2019-01-23 19:34:39 -06:00
Scott Lahteine	b4994ad12e	Update language_it.h	2019-01-23 19:28:57 -06:00
Bob Kuhn	2f35747f29	L6470 SPI daisy chain support (#12895 )	2019-01-23 19:06:54 -06:00
Scott Lahteine	6453b82a5e	Clean up trailing whitespace	2019-01-23 15:57:01 -06:00
Scott Lahteine	48a581ba2e	Tweak some HAL Due code	2019-01-23 00:53:20 -06:00
Marcio Teixeira	54fdf57b8c	ExtUI: Fix fan wrapping around from 0 to 100 (#12987 )	2019-01-22 23:33:10 -06:00
InsanityAutomation	dbe4126e07	Update language_en.h (#12988 )	2019-01-22 23:32:01 -06:00
teemuatlut	e5801b75f8	Fix TMC-related compile issues. (#12971 ) - `STEALTHOP_[XYZE]` configuration options now set the default state.	2019-01-20 23:54:57 -06:00
Gert-Jan Rodenburg	bb30927549	Fix pins for ZONESTAR_LCD with Zonestar ZRIB (#12956 )	2019-01-20 23:52:51 -06:00
Ludy	dc65d96aca	Fix TMC compile error (#12965 )	2019-01-20 23:47:28 -06:00
InsanityAutomation	a1cf49935d	Add laser control menu (#12883 )	2019-01-20 23:41:47 -06:00
InsanityAutomation	75f2665f2e	LCD SD Card items near top when not using wheel (#12926 )	2019-01-20 23:24:53 -06:00
Scott Lahteine	e1f951813a	Remove old block end comment	2019-01-20 02:30:03 -06:00
Scott Lahteine	52108192d1	Prevent L6470 class name conflict with drivers.h define Fix #12824	2019-01-20 00:32:56 -06:00
Scott Lahteine	0495fcd475	Minor spacing fix	2019-01-20 00:10:50 -06:00
lanserge	c2cf8ffa82	Add support for Arduino DUE Shield Kit (#12950 )	2019-01-19 23:43:32 -06:00
Scott Lahteine	4e5a915ef8	Fix some Makefile comments	2019-01-19 23:41:30 -06:00
Scott Lahteine	a5911765c3	Tweak some spacing	2019-01-19 20:27:57 -06:00
chrisly42	99e5e8362f	Rapide Lite 200 config, pins_RL200 RUMBA clone (#12848 )	2019-01-19 20:19:14 -06:00
Scott Lahteine	6411680364	Update some pins spacing	2019-01-19 19:21:52 -06:00
teemuatlut	8a3f1d6932	Fix chopper timing struct and initialization (#12943 )	2019-01-19 18:57:02 -06:00
Ludy	c6991109b7	Update German language (#12953 )	2019-01-19 18:50:24 -06:00
Giuliano Zaro	ca9eb14f6a	Update Italian language (#12951 )	2019-01-19 18:48:13 -06:00
Ludy	acf266fe78	Fix a compile warning, etc. (#12955 )	2019-01-19 18:47:29 -06:00
Scott Lahteine	424aa05cc2	Fix some file endings	2019-01-19 18:19:12 -06:00
Scott Lahteine	ce563d7c2e	Various general cleanups Mostly from the L6470-oriented PR	2019-01-19 16:56:12 -06:00
Scott Lahteine	02cc63d6d4	Update CreatorPro Configuration_adv.h	2019-01-19 16:37:50 -06:00
Marcio Teixeira	f4c16e683b	Follow up fixes to #12884 (#12940 )	2019-01-17 18:48:29 -06:00
Scott Lahteine	712e23c383	Fix up some whitespace	2019-01-17 18:05:36 -06:00
Ziemowit	20c20dacb7	MKS SBASE needs DRV8825 (#12911 )	2019-01-17 13:21:53 -06:00
Giuliano Zaro	7bb5d4bfe8	Small LED code reorganization (#12929 )	2019-01-17 13:20:26 -06:00
teemuatlut	e6805582a6	M569 to change stepping mode. Add new TMC section to LCD. (#12884 )	2019-01-17 13:17:16 -06:00
Bob Kuhn	d08f27e27b	Add support for STEVAL 3DP001V1 (#12894 )	2019-01-15 18:59:36 -06:00
Alain Martel	cdb562d558	Bring Migbot config up to date (#12916 )	2019-01-15 18:53:07 -06:00
Giuliano Zaro	8f4c6e6d1a	Fix case light on boot (#12919 )	2019-01-15 18:50:56 -06:00
Marcio Teixeira	f11c6d5d02	Fix M107 when dual-nozzles share fan (#12819 ) (#12909 )	2019-01-15 18:45:18 -06:00
Karl Andersson	64a4649290	STM32 - Fix SD write (#12897 )	2019-01-15 18:44:22 -06:00
Ludy	294521439e	Clean up Configuration_adv.h (#12900 )	2019-01-15 18:42:10 -06:00
InsanityAutomation	59b18aaeef	Allow resume from pause with parking enabled (#12893 ) Currently, Pause of an SD-Memory card print does not work. This has been verified to resolve the issue by multiple people. I understand more work needs to be done to resolve some of the concerns...	2019-01-15 07:58:54 -07:00
Giuliano Zaro	85f149befe	Save some progmem (#12913 )	2019-01-14 20:56:30 -06:00
mikeshub	7fde8d9d1e	Add CreatorPro / Makerbot / QIDI / etc and Mightboard RevE support (#12855 ) - Fix a bug in MAXxxxx thermocouple temp reporting. - Add support for 3-wire HD44780. - Add support for PCA9533 RGB driver. - Add configuration examples for FlashForge CreatorPro.	2019-01-14 14:29:55 -06:00
Scott Lahteine	3644c940bf	Tweak SD section of Main Menu	2019-01-13 18:00:07 -06:00
teemuatlut	1a79878dff	Remove TMC_Z_CALIBRATION in favor of Z_STEPPER_AUTO_ALIGN	2019-01-12 18:07:28 -06:00
Scott Lahteine	7cfce20cd3	Update comments on M125	2019-01-12 17:52:44 -06:00
Jason	dc4786a504	Config files for PowerWASP Printer (#12889 )	2019-01-12 16:57:45 -06:00
Scott Lahteine	3e867008f0	Fix some HAL_STM32F1 type declarations	2019-01-12 16:21:11 -06:00
Scott Lahteine	eb78aed863	Rename LCD menus according to variable types (#12892 )	2019-01-12 16:01:04 -06:00
InsanityAutomation	ed3ab5e212	Fix M24 not starting new job (#12887 )	2019-01-12 15:30:44 -06:00
Nils Hasenbanck	f9299c4461	Make timer definition in pin files for STM32 possible (#12874 ) RemRam needs to redefine a particular timer to work correctly. The HAL did foresee this possibility and checks if the timer was already defined for either the stepper or temperature timer. Prior to this commit the header file for the timers couldn't see those definitions in the pin file, but this commit will fix this. Tested on an actual hardware to verify. (It wouldn't boot without it.)	2019-01-12 14:40:49 -06:00
InsanityAutomation	082f6a27de	ADAPTIVE_FAN_SLOWING extension to hotend thermal protection (#12853 )	2019-01-12 00:41:48 -06:00
Scott Lahteine	459f4fef60	Fix Temperature::init bug with HEATER_4_PIN	2019-01-11 22:54:26 -06:00
InsanityAutomation	a403d9a50c	Improve menu pause / resume (#12876 )	2019-01-11 20:42:11 -06:00
Alain Martel	432c21456f	Add 3DFabXYZ Migbot example config (#12775 ) Co-Authored-By: Alain Martel <alain74martel@gmail.com>	2019-01-11 20:41:20 -06:00
Scott Lahteine	fb8111553e	getStatus => report_status	2019-01-11 19:51:00 -06:00
Chris Pepper	2919f3045d	[LPC176x] Update PIO extrascript (#12878 )	2019-01-11 19:45:33 -06:00
Scott Lahteine	19fea772e5	Use E_AXIS_N where it makes sense	2019-01-11 19:42:34 -06:00
Scott Lahteine	0d30ccf767	Tweaks to TMC26XStepper	2019-01-11 19:42:34 -06:00
HackingGulliver	1fd8e2c649	Fix: Junction Deviation calculates wrong cos(theta) on CoreXY (#12879 )	2019-01-11 19:25:48 -06:00
Scott Lahteine	b402040059	Split bed size sanity check into two	2019-01-11 15:49:57 -06:00
Chris Barr	1d33784bf9	Add RUMBA32 Board (#12856 )	2019-01-10 19:34:31 -06:00
Ondřej Nový	a0ef6198ff	Level bed corners Z-hop height option (#12858 )	2019-01-10 19:15:17 -06:00
Karl Andersson	8ae6f1e556	Fix errors and some compiler warnings with HAL_STM32 PlatformIO build (#12869 )	2019-01-10 19:01:31 -06:00
Scott Lahteine	e6484d9dab	Return to status when SD card is removed	2019-01-10 15:43:31 -06:00
Scott Lahteine	5f2d75f45b	Move PINS_DEBUGGING to @section develop	2019-01-08 20:05:05 -06:00
Scott Lahteine	da42f27c9e	Use maths macros for ceil/floor	2019-01-05 21:21:02 -06:00
Ludy	de4561c980	VORON Add LCD option BEEP_ON_FEEDRATE_CHANGE (#12822 )	2019-01-05 14:12:05 -06:00
Giuliano Zaro	709a6356f7	Remove obsolete test conditions (#12829 )	2019-01-05 14:02:45 -06:00
Luu Lac	bcf347403b	Fix M106 extruder & fan count (#12820 )	2019-01-05 14:01:35 -06:00
Kaushik Vemparala	ba7e35cbab	Add LCD option BEEP_ON_FEEDRATE_CHANGE (#12774 )	2019-01-04 19:30:08 -06:00
jmz52	d372e7e477	SDIO support for STM32F1 (#12782 )	2019-01-04 13:38:07 -06:00
Marcio Teixeira	6a8fb0f25f	Simplify backlash compensation code. (#12813 ) - Use `TEST(dm,axis)` to determine directions instead of doing comparisons. - Remove recomputation of `millimeters` and `delta_mm` since backlash compensation should not affect the distance over which material is extruded.	2019-01-04 13:30:56 -06:00
luxflow	7f244f9b9c	Update LPC SD pins for BIQU SKR (#12767 ) (Exactly matching the Azteeg X5 MINI Wifi)	2019-01-03 10:44:00 -06:00
jmz52	813a4ea107	Add support for Mks Robin TFT display (#12706 ) * Add support for MKS Robin TFT display - Add support for MKS Robin TFT display and encoder for MKS Robin board. - Generic 128x64 UI with x2 upscale is used (for now). - Tested on MKS Robin TFT V2.0 with ST7789V controller.	2019-01-03 10:38:39 -06:00
jmz52	c4237b529f	Fix MKS Mini and SD card conflct over SPI mode (#12783 )	2019-01-03 10:27:53 -06:00
Phr3d13	01f75591c6	Fix GTM32_PRO_VB Serial and HAL via watchdog (#12753 ) Move `watchdog_reset` from `.h` to `.cpp` to eliminate the need to include `MarlinConfig.h` in a HAL-related file.	2019-01-03 09:46:49 -06:00
Scott Lahteine	288340cb6c	Followup to VORON	2019-01-03 09:14:14 -06:00
Scott Lahteine	2aaa681dea	Remove unused Cheaptronic pins	2019-01-03 08:58:55 -06:00
Marcio Teixeira	81e753064a	Fix ExtUI compile warnings and error (#12799 )	2019-01-03 08:36:43 -06:00
Ludy	74c47803f7	Add VORON printer (#12705 )	2019-01-03 06:27:03 -06:00
kAdonis	637fb20c75	Allow 4 fan animation frames (#12772 )	2019-01-03 06:03:06 -06:00
petieken	d9cf5e4883	Update pins_BIQU_SKR_V1.1.h (#12758 )	2019-01-02 13:50:05 -06:00
TheLongAndOnly	cb643d87df	Adding missing code for triple Z-stepper auto-align (#12786 )	2019-01-01 18:22:04 -06:00
Ludy	14a7faf087	Fix compile warning comparison uint and int (#12788 )	2019-01-01 18:20:12 -06:00
Marcio Teixeira	60cb36bef3	Misc. improvements (#12747 ) * Make ExtUI respect MAXTEMP limits - Temperatures are now clamped by MAXTEMP limits rather than arbitrary values. * Speed up USB init, add status - Speed up USB initialization - Show status message if init failed * Enable status messages for EXTENSIBLE_UI * Adjust max limit to MAX_TEMP - 15 * Misc. tweaks to formatting, const, etc.	2019-01-01 15:17:48 -06:00
InsanityAutomation	4f2473053c	Fix M106 with SINGLENOZZLE	2018-12-31 20:10:18 -06:00
Reece Kibble	7557f8d68c	Rename all Stm32f1 to STM32F1 (#12639 )	2018-12-31 16:36:49 -06:00
Scott Lahteine	371d9a1acf	Fix line-endings, formatting, whitespace Followup to #12770	2018-12-30 15:38:20 -06:00
Ludy	135c74017c	Fix compile DEBUG_EEPROM_READWRITE error (#12746 )	2018-12-30 11:37:20 -06:00
Giuliano Zaro	54ba44ee37	Fix bad sanitycheck (#12748 )	2018-12-30 10:44:15 -06:00
swilkens	b01a630bd0	[2.0.x] Correct Ender 3 bed size (#12769 )	2018-12-30 10:42:47 -06:00
Alain Martel	44ed34475b	Add MKS BASE 1.4 pins (#12770 )	2018-12-30 10:40:22 -06:00
Roxy-3D	3a16cb6d7f	Slightly Slower Max X Axis speed On some T-Rex 2+ machines the previous max step rate could lose steps....	2018-12-28 09:14:48 -06:00
Ludy	814d93c7cf	Fix G33 sprintf output warning (#12738 )	2018-12-27 18:05:42 -06:00
Ludy	3877bf9704	Fix compile error with delta and sensorless homing (#12740 )	2018-12-27 17:51:22 -06:00
Ludy	cfc5e96b4b	Move JD to Config.h (and fix jerk->eeprom bug) (#12720 )	2018-12-27 15:29:39 -06:00
Roman Moravčík	594898aea7	Limit hotend / bed temperature to maxtemp-15 (#12713 )	2018-12-27 11:46:05 -06:00
InsanityAutomation	530ef5846f	Make nomove=false for toolchange on filament swap (#12739 )	2018-12-27 11:38:35 -06:00
InsanityAutomation	14ddda285c	Confirmation on Abort SD print (#12717 )	2018-12-27 11:36:39 -06:00
Msq001	f8c5d31864	Bugfix 2.0.x add motherboard pins define (#12689 ) - `pins_BIQU_B300_V1.0.h` defines pins for B300, as found in the BIQU Thunder 3D printer. - `pins_BIQU_SKR_V1.1.h` defines pins for bigtree/BIQU SKR V1.1 motherboard.	2018-12-27 10:52:35 -06:00
InsanityAutomation	b7a8dcc35d	Update Formbot T-Rex 3 pins (#12662 )	2018-12-20 17:32:39 -06:00
Ludy	f7127c44f8	Wanhao Duplicator i3 Plus pins create (#12701 )	2018-12-20 17:30:36 -06:00
jmz52	33abb86b7e	Add support for MKS Robin board (#12650 ) Implement initial support for MKS Robin (STM32F103ZET6) board. Custom build script is used to generate encrypted firmware compatible with original MSK Robin bootloader (i.e. safe firmware update from SD card and possibility to go back to original close-source firmware).	2018-12-20 17:23:27 -06:00
InsanityAutomation	367a9f65aa	Add Formbot 350c Thermistor (#12661 )	2018-12-20 17:04:17 -06:00
Ludy	33f3c75213	GTM32 Pro VB FAN-PIN correction (#12666 )	2018-12-20 16:42:15 -06:00
Scott Lahteine	9d59a9c840	Followup to #12691 (typo)	2018-12-20 16:38:32 -06:00
Ludy	3829d6ccf8	FYSETC F6 13 - E2_SERIAL_TX_PIN correction (#12667 )	2018-12-20 16:11:33 -06:00
Kadah	d35dcafa3d	Added MKS MINI 12864 support to FYSETC F6 V1.3 (#12656 )	2018-12-20 16:10:49 -06:00
Roman Moravčík	98cf546771	Limit set hotend temperature to maxtemp. (#12690 )	2018-12-20 15:56:37 -06:00
Roman Moravčík	4dad489a50	[2.0.x] Limit PID autotune target to maxtemp-15 (#12691 )	2018-12-20 15:55:30 -06:00
Marcio Teixeira	8dcc28c9ae	Squelch warning mentioned in #11061 (#12676 )	2018-12-20 15:34:24 -06:00
Ondřej Nový	4c8a6eee7b	[2.0.x] Update Czech translation (#12683 )	2018-12-20 15:28:46 -06:00
Ondřej Nový	fcaed685b2	[2.0.x] Set DEFAULT_NOMINAL_FILAMENT_DIA to 1.75 in Anet A6 config (#12664 )	2018-12-18 13:35:59 -06:00
Ondřej Nový	0572be9439	[2.0.x] Enable PIDTEMPBED in Anet A8 example config (#12655 )	2018-12-18 13:34:46 -06:00
Luc Van Daele	c6e09c2689	[2.0.x] G33 clean up (#12648 ) Remove obsolete workarounds in G33 for the now fixed zprobe_zoffset bug	2018-12-18 12:43:38 -06:00
teemuatlut	7a5e637a37	Add spreadCycle parameter sets (#12645 )	2018-12-18 12:42:14 -06:00
Marcio Teixeira	902d5b0f8b	Allow ExtUI to use LCD_SET_PROGRESS_MANUALLY (#12628 )	2018-12-12 17:21:37 -06:00
Dave Johnson	9a4a463ec4	Sanity-check LIGHTWEIGHT_UI, move comment up (#12630 )	2018-12-12 16:59:20 -06:00
teemuatlut	55144284c2	TMC connection test, spreadCycle parameters, improved debugging (#12616 )	2018-12-09 20:54:48 -06:00
Ludy	97de9d54a5	Fix broken pins file include (#12617 )	2018-12-09 19:06:03 -06:00
Ludy	a7b3a61424	Improve some config comments readability (#12615 )	2018-12-09 19:02:42 -06:00
Scott Lahteine	daf07e4200	Align classic bed icon consistently	2018-12-09 12:00:10 -06:00
MasterPIC	3bb8b3529a	Center ABL grid on bed with H parameter. (#12610 )	2018-12-09 11:24:48 -06:00
Scott Lahteine	6cf8d40f41	Fix some serial echos of pin states	2018-12-09 02:38:32 -06:00
Scott Lahteine	f6321f878a	Simpler AVR + Trinamic + Soft Serial sanity-check (#12606 )	2018-12-08 23:34:26 -06:00
Scott Lahteine	7d15854514	Add Z_MIN_PROBE_PIN to MKS SBASE pins	2018-12-08 15:31:59 -06:00
Scott Lahteine	e8bda62d2a	Followup to servo angles patch Fix #12594	2018-12-08 15:31:59 -06:00
Scott Lahteine	18fedafbc5	Refresh screen on SD Init	2018-12-08 15:31:59 -06:00
Marcio Teixeira	b22716e938	M425 Backlash Correction (#11061 )	2018-12-08 14:36:46 -06:00
Scott Lahteine	fa47ce369a	Sanity-check for negative steps, feedrate, accel	2018-12-07 19:38:15 -06:00
Scott Lahteine	ef81b5f03e	Link to font docs in ultralcd_DOGM.cpp	2018-12-07 19:10:55 -06:00
Scott Lahteine	4388015f1a	Tweak config formatting	2018-12-07 16:57:14 -06:00
Scott Lahteine	b7e38ea249	Signal an invalid mesh for M420 enable / load	2018-12-07 16:14:11 -06:00
teemuatlut	50b2fbd031	Trinamic: Split stealthChop, improve driver monitoring, etc. (#12582 )	2018-12-07 15:34:21 -06:00
Scott Lahteine	9fbd73d931	Fix up some delta settings	2018-12-05 18:57:47 -06:00
Dave Johnson	0947b92734	Build and CI fixes and optimizations (#12584 ) -Disable LDF "deep+" mode on AT90USB platforms. Appears not needed any longer (likely due to fix `7322df26ad`). Results in identical binary output and cuts compile time in half -Disable Cartesio config from CircleCI (compile failure) -Disable Geetech I3 Pro X GT2560 from CircleCI (compile failure) -Enable EEPROM on Micromake example config (fix compile failure) -Move FolgerTech/i3-2020 to AVR platform in CircleCI (fix CirculeCI build failure) -Disable various examples failing to build in CircleCI -Enable various examples no longer failing to build in CircleCI	2018-12-05 17:21:40 -06:00
mr-miky	11c7945365	Don't include STM32 Core code when compiling STM32 Generic (#12575 )	2018-12-03 06:55:49 -06:00
Scott Lahteine	64389acdf1	Print a space after scrolling status	2018-12-03 06:17:09 -06:00
Scott Lahteine	7a361ad36a	Alternative fan image option (#12579 ) * Alternative fan bitmap * Move bed over by 3px	2018-12-03 05:55:33 -06:00
Scott Lahteine	261c6f4b96	Fix pause/resume SD print Followup to #12551, addressing #12566	2018-11-30 19:23:08 -06:00
Scott Lahteine	2224a4d61a	Remove AVR-only MARLIN_DEV_MODE code	2018-11-30 17:54:24 -06:00
Scott Lahteine	e874f9664c	Tweaks to endstops code	2018-11-30 14:25:55 -06:00
Scott Lahteine	3c58b16c9f	Move stepper enable/disable to stepper_indirection.h (#12562 )	2018-11-30 12:48:46 -06:00
Scott Lahteine	aaf862aef2	Fix angles for disabled EDITABLE_SERVO_ANGLES (#12559 )	2018-11-30 12:31:42 -06:00
Scott Lahteine	c986239837	A single SERIAL_ECHO macro type (#12557 )	2018-11-29 16:58:58 -06:00
Scott Lahteine	69d869c3d9	Tweak FR icon. Update font data.	2018-11-29 12:59:30 -06:00
Scott Lahteine	0c1cd9f590	Fix "No SD Card" indicator	2018-11-29 12:35:31 -06:00
Jacob Jordan	8be91677df	Fix Skew factors (#12555 ) - Ensure Skew factors are calculated from test square measurements	2018-11-29 11:39:31 -06:00
Scott Lahteine	03ef2d6c82	Fix "paused" message and M125 called by M25 (#12551 )	2018-11-28 19:28:31 -06:00
Scott Lahteine	95d154a91f	Fans loop macro	2018-11-28 16:45:08 -06:00
Scott Lahteine	61db0b65b6	Followup to heating progress	2018-11-28 14:47:43 -06:00
Scott Lahteine	4f9ec9ab45	Add heating progress bars (#12543 )	2018-11-27 21:15:52 -06:00
Scott Lahteine	929a513a6b	Add poll_runout_states, which returns 1 for runouts (#12547 )	2018-11-27 20:13:24 -06:00
Scott Lahteine	01b5c810d5	Space out multiple edit lines a bit	2018-11-27 18:10:19 -06:00
Scott Lahteine	cd88ea2106	Fix runout debug output Followup to #12544	2018-11-27 18:10:19 -06:00
Scott Lahteine	cecc238f68	Save recovery info on SD pause	2018-11-27 14:42:19 -06:00
Marcio Teixeira	439a3e8463	Improve runout sensor, fix LIGHTWEIGHT_UI screen size (#12544 )	2018-11-27 13:45:25 -06:00
Scott Lahteine	5b24ce9024	Hide M217 compile warning	2018-11-26 16:52:16 -06:00
David Bates	d94b50a3d8	Add sample config for Delta with MKS SBASE (#10819 )	2018-11-25 21:23:02 -06:00
InsanityAutomation	dec721c52b	Add Formbot Raptor2 and Raise3D pins (#12532 ) * Add Formbot Raptor2 board * Add Raise3D Rumba board	2018-11-25 19:56:06 -06:00
Scott Lahteine	6aae199572	Add missing boards to Makefile	2018-11-25 19:11:09 -06:00
Scott Lahteine	0a638cc022	Adjust Formbot Raptor pins	2018-11-25 18:35:45 -06:00
Ludy	e5019a0481	Fix English special symbols (#12529 )	2018-11-25 18:19:12 -06:00
Scott Lahteine	09d6db491a	Fix wait_for_bed compile error	2018-11-25 18:05:41 -06:00
Roman Moravčík	d545f984b0	Update Slovak translation (#12523 )	2018-11-25 17:44:51 -06:00
Ludy	730f223100	Correct FANMUX2_PIN (#12538 )	2018-11-25 17:27:41 -06:00
Yücel Temel	d857cdfb27	Update Turkish language (#12524 )	2018-11-25 17:26:26 -06:00
Scott Lahteine	4a7c6f7241	NUM_ARRAY => COUNT	2018-11-24 00:27:45 -06:00
Giuliano Zaro	31113c5adf	Update Italian language (#12512 )	2018-11-24 00:26:54 -06:00
Scott Lahteine	b57343c255	Put status screen options in Configuration_adv.h	2018-11-23 23:15:07 -06:00
Scott Lahteine	1fcc13b011	Allow Serial Overrun Protection to be disabled	2018-11-23 21:07:38 -06:00
Scott Lahteine	29c53f2402	Hide some compile warnings	2018-11-23 21:07:38 -06:00
Scott Lahteine	caca3c8503	Use wait_for_bed with WAIT_FOR_BED_HEATER Addressing #12517	2018-11-23 20:39:23 -06:00
Scott Lahteine	f1efcfed14	Fix backslash in language_test.h	2018-11-23 20:39:23 -06:00
Yücel Temel	3b186a55ac	Don't show superscript ³ with NOT_EXTENDED_ISO10646_1_5X7 (#12513 )	2018-11-23 20:16:51 -06:00
Scott Lahteine	82c96c971e	Bring superscripts slightly lower in BDF fonts	2018-11-23 20:02:34 -06:00
Sinisa Culic	8a0992d921	Fast PWM for controller fan (#12485 )	2018-11-23 16:03:39 -06:00
Ludy	e98d195901	Remove extra declarations in cardreader.cpp (#12520 )	2018-11-23 15:58:20 -06:00
Scott Lahteine	fd2998efd5	Revert ADC_KEYPAD direction behavior (#12508 )	2018-11-22 06:00:00 -06:00
Scott Lahteine	d29cb09b3e	Fix a minor compile warning	2018-11-22 05:35:38 -06:00
Yücel Temel	5b1d52671c	Use superscript 3 in language_en.h (#12504 )	2018-11-22 02:27:28 -06:00
Marcio Teixeira	7109dadd21	Additional pin definitions for Archim 2 (#12500 ) - Added GPIO pins to Archim 2 - Added new 108 pin to `fastio_Due.h`	2018-11-22 01:07:02 -06:00
Andy Shaw	4975b13b74	Fix problems with LPC1768 EEPROM flash emulation (#12503 ) * Remove duplicate calls to PrepareSector Some flash memory API calls require that a call to `PrepareSector` is done before use. However this call is already made by the LPC1768 framework so the calls in this code are not required. * Ensure correct alignment of RAM buffer The LPC176X flash API requires that the RAM buffer used for write operations must be word-aligned. This change ensures that this is the case.	2018-11-22 01:03:32 -06:00
Scott Lahteine	b738972e69	General cleanup of Re-ARM pins	2018-11-21 19:00:49 -06:00
Scott Lahteine	ee423dcdd0	Invert hotend bitmaps, by default	2018-11-21 01:02:06 -06:00
Scott Lahteine	c5642a894f	Fix ADC_KEYPAD middle button (#12493 )	2018-11-20 21:39:30 -06:00
Scott Lahteine	0946cbcdca	Revert some const changes (for now)	2018-11-20 08:19:48 -06:00
Scott Lahteine	4def8b3b5e	Expanded options for _Statusscreen.h (#12455 ) See the PR for full details. The updated system will be documented on the website in the near future.	2018-11-20 07:50:37 -06:00
Scott Lahteine	d51e5690f4	Don't show updir with no card present	2018-11-20 07:01:46 -06:00
Scott Lahteine	ec9d21a234	Shift YZ on graphical display to fit Z+123.45	2018-11-20 06:58:18 -06:00
Scott Lahteine	817a37169a	Apply/unapply const here and there	2018-11-20 06:44:21 -06:00
Scott Lahteine	643e0066a0	Followup to #12451	2018-11-20 06:27:19 -06:00
Marcio Teixeira	4bcb63b705	Fix for #12482 (#12483 ) Fix Z-move to uninitialized position in SWITCHING_EXTRUDERS tool_change (no_move=true)	2018-11-20 00:04:11 -06:00
Marcio Teixeira	50ee747787	Fix compilation errors. Followup to #12439 (#12481 )	2018-11-20 00:02:13 -06:00
Ludy	90a58488b5	Corrected unused var, default switch, Travis tests (#12477 )	2018-11-19 23:59:48 -06:00
Scott Lahteine	a4c15dc54f	Modify MBL to use IJ instead of XY (#12478 )	2018-11-19 09:08:15 -06:00
Scott Lahteine	fc3f1c4572	Get u8g reference for lcdprint	2018-11-19 06:23:15 -06:00
Scott Lahteine	88c57eaf55	Clean up some u8g code (#12476 )	2018-11-19 01:33:59 -06:00
Ludy	1f93d2bcf7	Fix LCD compile error, etc. (#12472 )	2018-11-18 20:39:49 -06:00
Scott Lahteine	826d570162	Combine Travis CI option-setting commands (#12474 )	2018-11-18 19:58:02 -06:00
Scott Lahteine	9d13f07d09	GTM32 Pro VB changes from Markku Sinisalo	2018-11-18 19:56:38 -06:00
Roman Moravčík	5fbe5cabc8	Fixed displaying of kill MSG_OUTAGE_RECOVERY string. (#12470 )	2018-11-18 18:05:29 -06:00
kAdonis	4ae9a06c60	Update M303.cpp (#12471 )	2018-11-18 18:04:51 -06:00
Ludy	c0b75f49b6	Fix "no effect" and "unused variable" compile warnings (#12473 )	2018-11-18 17:54:00 -06:00
Nils Hasenbanck	5a4fd8e0a6	Fix access to the DWT peripheral for STM32 HAL (#12434 ) Access to the DWT peripheral for the `CYCCNT` register needs to happen before `main()`. The code needs to be called after the setup of the system clocks, so the right place is between the `premain()` and `main()` function of the STM32 Arduino core. This patch moves the DWT access code to a new function, which is then placed between `premain()` and `main()`.	2018-11-18 01:30:46 -06:00
Scott Lahteine	7f225b9421	Fix MAX_MESSAGE_LENGTH	2018-11-18 01:11:26 -06:00
Scott Lahteine	06674a321a	Remove extra include	2018-11-18 00:34:07 -06:00
Marcio Teixeira	c1e17037e5	Various fixes for MarlinUI and ExtUI (#12439 )	2018-11-17 22:21:44 -06:00
Giuliano Zaro	d3605cfc26	Don't start watching heaters when target is 0 (#12453 )	2018-11-17 21:53:52 -06:00
Ludy	93e958f695	Fix compile error with ZONESTAR_LCD+NO_LCD_MENUS (#12466 )	2018-11-17 21:21:30 -06:00
Ludy	22d7fed60a	Fix compile error with SD_FIRMWARE_UPDATE (#12462 )	2018-11-17 21:13:36 -06:00
Nils Hasenbanck	779b2709ec	Change temperature pin order for RemRam V1 (#12458 ) Beta testers suggested to adopt the RAMPS order of temperature probe connectors. This commit fixes the order to the RAMPS order.	2018-11-17 16:51:06 -06:00
Scott Lahteine	8ebb4dc294	Followup to static CardReader	2018-11-17 07:52:35 -06:00
Scott Lahteine	7ee5894360	Allow float XY probe offsets Responding to #12383 XY probe offsets should be integers because adding decimal points makes the code larger. But if decimals are very much wanted, this commit removes the old restriction.	2018-11-17 07:44:47 -06:00
Giuliano Zaro	43ecdb606f	Fix a compile warning (#12452 )	2018-11-17 07:08:25 -06:00
Ph0non	984c4ba8c7	Enable SD Card on RepRap Display and RADDS (#12446 ) * Enable SD Card on RepRap Display and RADDS Define the necessary pins in `pins_RADDS.h` (copied from the `RADDS_DISPLAY` section) for the use of the SD card slot on RRD.	2018-11-17 06:59:40 -06:00
Ludy	56a94c2a26	Use 'target_extruder' in M104 as with M109 (#12448 )	2018-11-17 06:55:25 -06:00
Scott Lahteine	66580f32c2	Make CardReader class static (#12451 ) * Make CardReader a static class * Make CardReader flags into bitfields	2018-11-16 22:39:16 -06:00
Scott Lahteine	3e9ffaddb6	Consolidate, optimize some LCD menu code (#12450 )	2018-11-16 21:44:48 -06:00
Scott Lahteine	d97e31db4c	Optimize Power-Loss Recovery (#12440 )	2018-11-16 20:47:07 -06:00
Mateusz Krawczuk	ca21ac6b9b	Support two MAX6675 thermocouples (#8686 )	2018-11-16 18:20:33 -06:00
Scott Lahteine	0e610815e4	No need for Cap:PAREN_COMMENTS	2018-11-16 04:28:40 -06:00
Scott Lahteine	7a075a5dc9	Tweak extruder errors	2018-11-16 01:32:21 -06:00
Scott Lahteine	2d92f333f5	Fix GcodeSuite::T active_extruder reference	2018-11-15 14:07:24 -06:00
Scott Lahteine	d2bb53702a	Optimize target_extruder, ignore T with mixing (#12432 ) * Optimize target_extruder, ignore T with mixing * Give G-code Tn parity with tool_change	2018-11-14 17:33:04 -06:00
Marcio Teixeira	5e586a6b39	Fix to runout sensor code. (#12431 ) - "old_state" is no longer a class static variable.	2018-11-14 16:54:05 -06:00
Scott Lahteine	d82c350de7	Miscellaneous LCD code renaming, reordering (#12430 ) * Move special characters to language.h * Apply some naming standards * Clean up menu item draw functions * Rename some Temperature methods * UI => ExtUI	2018-11-14 13:13:51 -06:00
Scott Lahteine	edfd106bc5	Rejigger Filament Runout class (#12428 )	2018-11-14 11:45:57 -06:00
Scott Lahteine	f4c128ecaa	Move RRW keypad code to a common method (#12429 )	2018-11-14 06:00:21 -06:00
Scott Lahteine	54ec5528a0	hasstatus => has_status	2018-11-14 01:34:28 -06:00
Scott Lahteine	ebf585b673	Fix an old sanity check	2018-11-14 01:15:35 -06:00
Ryan	052d102ded	UltiMachine Archim 1 support (#12404 )	2018-11-14 00:27:39 -06:00
Scott Lahteine	664e20754d	Clean up pins files	2018-11-14 00:23:33 -06:00
Scott Lahteine	1eb5249598	Fix Formbot Trex-2+ configs Followup to #12422	2018-11-13 21:53:54 -06:00
thiagodesacosta	075a22ed65	Update Portuguese-Brazilian translation (#12402 )	2018-11-13 19:42:25 -06:00
Marcio Teixeira	3ceab8474c	Add required "cardreader.h" include (#12419 )	2018-11-13 17:12:44 -06:00
Giuliano Zaro	98c2fc4e42	Endstops fix followup (#12423 ) Followup to #12413	2018-11-13 17:10:07 -06:00
Roxy-3D	f19fd642ce	Updates to Formbot T-Rex 2+ configuration files (#12422 ) Updates to Formbot T-Rex 2+ configuration files	2018-11-13 13:48:35 -06:00
Roxy-3D	cda5ef08fa	Debug of G2-G3 for UBL (#12386 ) Changes only affect UBL. Everything else is left alone.	2018-11-13 11:20:21 -06:00
AnHardt	9ad3aed0ef	Fix tool-change for MIXING_EXTRUDER with < 2 virtual tools (#12417 ) Fix #12416 Better handling of `ENABLED(MIXING_EXTRUDER) && !MIXING_VIRTUAL_TOOLS > 1` - to not fall through to the general case. Fix compiler warnings for `#elif EXTRUDERS < 2`.	2018-11-13 04:56:10 -06:00
Giuliano Zaro	d631267548	Refine endstops fixes (#12413 ) When endstops/probe are enabled `ENDSTOP_NOISE_THRESHOLD` calls to `update` are required to properly re-sync endstops/probe status.	2018-11-13 04:31:58 -06:00
Scott Lahteine	0ee1a92971	Group status methods, share reset_status with Extensible UI (#12414 ) * Group status methods, share reset_status with Extensible UI * Move common DOGM code to headers	2018-11-13 01:47:45 -06:00
Scott Lahteine	690c4e8457	Clean TLM trailing whitespace	2018-11-13 00:03:34 -06:00
Scott Lahteine	143b2896e0	Add M412 to enable/disable filament runout detection (#12406 )	2018-11-12 21:29:46 -06:00
Scott Lahteine	a163c89c6a	Followup to `50af1d1`	2018-11-12 20:31:53 -06:00
AnHardt	be6271767f	Fix BABYSTEP_ZPROBE_OFFSET (#12408 ) Fix #12399 Did not compile without `WATCH_HOTENDS \|\| WATCH_THE_BED`. Add condition to include "../../module/temperature.h".	2018-11-12 17:44:21 -06:00
Scott Lahteine	50af1d1e08	Differentiate translated On/Off from Serial ON/OFF	2018-11-12 17:23:08 -06:00
Scott Lahteine	df907a905f	Update UBL comments for debug change	2018-11-12 03:46:48 -06:00
Scott Lahteine	da17f8ad37	For now (!) don't synchronize in M204 and M205 See if this has any deleterious effect on motion planning by slicers that inser their own jerk and acceleration controls. The problem I see is that these settings can take effect on blocks already in the planner, and the only way around this would be to shadow these settings in planner blocks and use the shadowed settings in the planner.	2018-11-12 02:43:24 -06:00
Scott Lahteine	a3923424c7	Clean up LCD width/height determination	2018-11-12 02:37:40 -06:00
Scott Lahteine	a0c795b097	Encapsulate common display code in a singleton (#12395 ) * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.	2018-11-11 12:16:24 -06:00
Scott Lahteine	9da6809ac3	Adjust some comment spacing	2018-11-11 11:28:50 -06:00
Scott Lahteine	471f403a67	Reduce code size with plain inlines	2018-11-11 08:36:10 -06:00
Scott Lahteine	30a49f5ee2	Apply extra condition to LCD_PROGRESS_BAR	2018-11-11 08:36:10 -06:00
Scott Lahteine	4e0c935959	Update HAL and libs formatting	2018-11-10 19:43:23 -06:00
Scott Lahteine	47483e8c17	Update Raptor config	2018-11-10 19:42:46 -06:00
Scott Lahteine	6093df11dc	Allow G26 to use the active extruder (#12387 ) * Make lcd_quick_feedback argument optional * Add click_to_cancel option to wait_for_hotend/bed * Have G26 use the active nozzle and wait_for_hotend/bed * Use wait_for_release in UBL G29 * Add 'T' parameter to G26 for an initial tool-change	2018-11-10 18:07:38 -06:00
articide	4260282df7	Tevo Little Monster example configuration (#12370 )	2018-11-10 03:36:01 -06:00
Scott Lahteine	bed15fcd81	Tweak 'echo_not_entered' used by MBL's G29	2018-11-10 01:32:51 -06:00
Scott Lahteine	c239131ff5	Use 'serial_spaces' in 'print_2d_array'	2018-11-10 01:32:51 -06:00
Scott Lahteine	56150ec030	Add reference comments to MeshLevelingState	2018-11-09 21:31:20 -06:00
Ludy	24c5e57bb6	Update German language (#12379 )	2018-11-09 15:25:29 -06:00
Giuliano Zaro	fd7fd55662	Solve endstops issues (#12382 ) - Partially reverts #11900 and tries to solve #12336	2018-11-09 14:58:04 -06:00
Scott Lahteine	78ccedd6a8	Fix M91x sanity-check to permit TMC2660 Fix #12362	2018-11-09 05:48:15 -06:00
revilor	b60abc7c37	[2.0.x] Macro G-codes (#9365 )	2018-11-09 05:25:08 -06:00
Giuliano Zaro	ccdbf20f60	Update Italian language (#12368 )	2018-11-09 04:04:02 -06:00
Roman Moravčík	d08847b1a6	Update Slovak translation (#12376 )	2018-11-09 04:03:07 -06:00
InsanityAutomation	7665dff58b	No error on T0 with single-extruder and fix MIXING_EXTRUDER virtual tools (#12375 )	2018-11-09 00:15:07 -06:00
Scott Lahteine	4ed6397e5d	More comprehensive NO_LCD_MENUS (#12367 )	2018-11-09 00:07:16 -06:00
Scott Lahteine	9c8f083d6c	Extend pins errors to include the processor	2018-11-08 22:25:59 -06:00
Scott Lahteine	525ea554a1	Remove obsolete comments	2018-11-08 10:55:18 -06:00
Scott Lahteine	ef724edd80	Apply HAS_LCD_MENU in EEPROM code	2018-11-08 10:03:05 -06:00
Scott Lahteine	b169320a03	Clean trailing whitespace	2018-11-07 02:40:18 -06:00
Scott Lahteine	81b1e9d272	Fix up xdiff, ydiff, zdiff in tool change Followup to #12137	2018-11-06 22:56:33 -06:00
InsanityAutomation	6471a75a22	Combine more tool-change variables (#12137 )	2018-11-06 22:22:20 -06:00
Scott Lahteine	147e270208	Restore GTM32_PRO_VB temp and heater pins Undo #12345	2018-11-06 21:41:30 -06:00
Scott Lahteine	8def25e475	Set CUSTOM_MACHINE_NAME for some configs	2018-11-06 21:41:30 -06:00
Scott Lahteine	812f6a7dd7	Fix Resume from SD Pause In reference to https://github.com/MarlinFirmware/Marlin/pull/12098#issuecomment-436231690	2018-11-06 21:09:37 -06:00
Scott Lahteine	4f72e041f2	Use card.stopSDPrint() for completeness	2018-11-06 20:55:17 -06:00
Scott Lahteine	488a17b3f5	Use IS_SD_PRINTING() more	2018-11-06 20:55:17 -06:00
Marcio Teixeira	4dbaa6369f	Fix const pointer assignment compile error (#12350 )	2018-11-06 19:49:39 -06:00
Giuliano Zaro	959ed32636	Update Italian language (#12352 )	2018-11-06 19:30:24 -06:00
Roman Moravčík	812bfec65e	Update Slovak translation (#12354 )	2018-11-06 19:29:28 -06:00
Ludy	1624722566	Update German translation (#12355 )	2018-11-06 19:28:40 -06:00
Scott Lahteine	e574f01568	More advanced pause tweaks (#12356 ) * Followup to LCD_TIMEOUT_TO_STATUS=0 * Make continuous purge screen fit 20x4 * Unify purge message modes * Preserve last-set pause header mode	2018-11-06 19:25:57 -06:00
Scott Lahteine	5a470d4a49	Apply some tool-change cleanup	2018-11-06 18:20:01 -06:00
Roman Moravčík	34ea458667	Fixed advanced pause messages (#12353 )	2018-11-06 15:27:19 -06:00
Scott Lahteine	4c5ca89d8c	Show the appropriate pause message (#12348 )	2018-11-06 04:13:48 -06:00
Marcio Teixeira	8517d5f915	LCD menu code refactoring and cleanup (#12308 )	2018-11-05 22:51:10 -06:00
Scott Lahteine	b3b4e6dc45	Change Marlin debug flag names to fix conflicts (#12340 ) In reference to #11000	2018-11-05 22:48:28 -06:00
Giuliano Zaro	f7e682eeee	Update Italian language (#12344 )	2018-11-05 22:46:59 -06:00
Phr3d13	a813900fce	Add Geeetech Rostock 301 config, update GTM32 Pro VB pins (#12345 )	2018-11-05 22:42:06 -06:00
Scott Lahteine	04f173790f	Remove trailing whitespace	2018-11-05 22:38:20 -06:00
Scott Lahteine	c536ee1122	Clean up bq Zum Mega 3D pins	2018-11-05 22:38:20 -06:00
Scott Lahteine	c31e1735dd	Restore LPC1768_PIN_INTERRUPT_M, apply to Z3 - In reference to #12166	2018-11-05 06:28:49 -06:00
Scott Lahteine	93d5b945dd	Hide mesh editing until a valid mesh exists	2018-11-05 05:13:34 -06:00
Ludy	f34f09c821	Update German language (#12336 )	2018-11-05 04:33:31 -06:00
Roman Moravčík	eefd7676a3	Updated slovak translation (#12338 )	2018-11-05 04:31:12 -06:00
Scott Lahteine	486f2a66a9	Fix MBL XY parameter error messages Fix #11522	2018-11-05 04:17:37 -06:00
Scott Lahteine	2613ddf61c	Fix "circle"	2018-11-05 04:17:37 -06:00
Scott Lahteine	b779b42ffd	Prevent current step-down going negative Addressing #11348	2018-11-05 04:17:37 -06:00
Scott Lahteine	427bc64ba1	G28 O respects HOME_AFTER_DEACTIVATE Addressing #11271	2018-11-05 04:17:37 -06:00
Scott Lahteine	3866aeac52	Clean up ENCODER_RATE_MULTIPLIER config	2018-11-05 04:17:37 -06:00
Scott Lahteine	498dfa291e	Update and fix CHDK	2018-11-05 04:17:37 -06:00
Scott Lahteine	fed84f2961	Use multiplier edit item for mesh point editing	2018-11-05 04:17:37 -06:00
Scott Lahteine	d5ab4cd22a	Provide a default for Z_PROBE_LOW_POINT	2018-11-05 04:17:37 -06:00
Scott Lahteine	3cbc3ecdd7	Fix 'M43 T' to use 'L' as last pin - The documentation is correct. The code was wrong.	2018-11-05 04:17:37 -06:00
Scott Lahteine	1769249876	Recommend keeping endstops off	2018-11-05 04:17:37 -06:00
Scott Lahteine	5182eaf661	Fix endstops enable behavior during probing Fix a bug introduced in #9582	2018-11-05 04:17:37 -06:00
Scott Lahteine	07a0822ebe	M420 support in MARLIN_DEV_MODE	2018-11-04 20:54:38 -06:00
Scott Lahteine	63be48ada6	Add MESH_EDIT_MENU to example configs	2018-11-04 19:07:47 -06:00
KangDroid	82ff7c6542	Add a mesh edit menu for MBL / ABL-Bilinear	2018-11-04 19:07:47 -06:00
Scott Lahteine	44fa7fb18c	Cleanups for leveling-related code	2018-11-04 19:07:47 -06:00
Scott Lahteine	cc2bc67440	ENABLED(NEWPANEL) => HAS_LCD_MENU	2018-11-04 19:06:10 -06:00
Scott Lahteine	fc84878cba	MSG_UBL_EDIT_MESH_MENU => MSG_EDIT_MESH	2018-11-04 19:06:10 -06:00
Scott Lahteine	cd066bfeba	Extend error messages for E factors sanity-checks	2018-11-04 18:42:56 -06:00
Ludy	c10edb0998	Update, correct sanity-checks for up to 6 extruders (#12333 )	2018-11-04 18:36:45 -06:00
Scott Lahteine	0c85869c26	Clean up file endings	2018-11-04 18:30:10 -06:00
Scott Lahteine	b99f0776d6	Clean up some U8G files	2018-11-04 18:30:10 -06:00
Scott Lahteine	8014e1cc9d	Allow disable of LCD_TIMEOUT_TO_STATUS (when 0)	2018-11-04 18:30:10 -06:00
Giuliano Zaro	bd05816fd8	Update Italian language (#12327 )	2018-11-04 16:43:02 -06:00
Scott Lahteine	3c21483c88	Provide DOGLCD SPI pins for MKS SBASE + VIKI	2018-11-04 16:20:22 -06:00
Scott Lahteine	e0956bb572	Drop 'register' storage specifier	2018-11-04 16:17:13 -06:00
Scott Lahteine	c04cf127f7	Fix EEPROM servo angles init, section grouping	2018-11-04 16:14:54 -06:00
Scott Lahteine	9c0e05552e	Suppress some compile warnings	2018-11-04 15:25:31 -06:00
Karl Andersson	176654791e	Use board-specific or platform SPI pins in HAL_STM32 (#12323 )	2018-11-04 15:03:45 -06:00
Scott Lahteine	60dbd8161c	Fix VMAX editing Fix #12326	2018-11-04 07:06:14 -06:00
Scott Lahteine	b7ca93ba37	Remove dead comment	2018-11-04 06:10:35 -06:00
Scott Lahteine	608be966d7	Add servos to pins_FYSTEC_F6_13.h	2018-11-04 06:10:35 -06:00
Hannes Brandstätter-Müller	67b22760d9	Return to status to show manual deploy/stow messages (#12324 )	2018-11-04 04:51:26 -06:00
tharts	f5e8e8b53d	Fix broken LPC176x build (#12317 ) * Fix broken LPC176x build * Add UBL+HD44780 test for LPC1768	2018-11-04 04:25:03 -06:00
Scott Lahteine	f5eab912ed	Apply #pragma once, misc cleanup (#12322 ) * Apply #pragma once in headers * Adjust some thermistors formatting * Misc cleanup and formatting	2018-11-04 02:25:55 -06:00
Scott Lahteine	8696f882a9	Merge pull request #12313 from thinkyhead/bf2_scara_home_offset Revive SCARA home offset (not fully implemented)	2018-11-03 07:05:24 -05:00
Scott Lahteine	56d2dcb184	Use first_page flag in place of page.page == 0	2018-11-03 06:59:21 -05:00
Scott Lahteine	d1ff22b983	Revive SCARA's home offset (unimplemented)	2018-11-03 06:24:41 -05:00
Scott Lahteine	2c9586be0c	Clear up HAS_WORKSPACE_OFFSET meaning	2018-11-03 04:06:37 -05:00
Scott Lahteine	6e3caf23b6	IS_DELTA => ENABLED(DELTA)	2018-11-03 03:57:11 -05:00
Scott Lahteine	19f49db96f	Tweak / reduce menu items	2018-11-03 01:18:59 -05:00
Scott Lahteine	e4cf175163	Synchronize on M204, M205 (#12302 ) * Add parser.seen for multiple parameters * Fix M666, use !seen for report * Synchronize on M204, M205	2018-11-03 01:16:37 -05:00
Ludy	5ba6607181	Fix keypad-related compile error (#12306 )	2018-11-02 22:29:32 -05:00
Scott Lahteine	2fb2e286ee	Followup to #12256	2018-11-02 01:32:24 -05:00
Scott Lahteine	3eb9838dca	Simplify TMC sanity-checks	2018-11-02 01:15:49 -05:00
Scott Lahteine	f5b31e218d	Followup to #12082	2018-11-02 01:15:27 -05:00
Scott Lahteine	31c28d0dd2	Drop pgm_read__near and let headers choose (#12301 ) - Drop `pgm_read__near` and let headers choose. - Define `USE_EXECUTE_COMMANDS_IMMEDIATE` as a conditional. - Add `process_subcommands_now` for SRAM-based commands.	2018-11-02 00:42:16 -05:00
Scott Lahteine	fce150f094	inline static => static inline	2018-11-01 23:15:17 -05:00
Giuliano Zaro	323c088356	Restore LED light color after pid tuning (#12082 )	2018-11-01 22:04:19 -05:00
Ludy	9f77df2590	Followup to menu refactor. TMC warnings, sanity. (#12288 ) - Followup fixes for menu refactor - Fix TMC sanity checks, unused var warnings	2018-11-01 16:13:33 -05:00
Nils Hasenbanck	cafabf2055	Implement DELAY_NS with CYCCNT on Cortex-M7 (#12283 )	2018-11-01 16:11:51 -05:00
Scott Lahteine	f5498168ae	Ensure PENDING/ELAPSED use a 32-bit integer	2018-11-01 16:08:23 -05:00
MasterPIC	6e041b9c61	Use blink to show more info on LCD (#12256 )	2018-11-01 15:56:12 -05:00
Scott Lahteine	eb5600acd2	Add parentheses to LCD_CLICKED	2018-11-01 15:06:14 -05:00
Scott Lahteine	42f8b6c530	Make M125 work with SDSUPPORT (#12289 )	2018-11-01 15:03:45 -05:00
Scott Lahteine	f319087372	Followup to #12293	2018-11-01 14:41:03 -05:00
AnHardt	74bbb13008	Fix Mixer calculations for 32-bit processors (#12293 )	2018-11-01 14:38:45 -05:00
Scott Lahteine	549d11225a	Add to description of Z_STEPPER_AUTO_ALIGN In response to #12272	2018-10-31 18:07:20 -05:00
Scott Lahteine	2cff0d1f39	Move menu_level_bed_corners to its own file	2018-10-31 17:44:42 -05:00
Scott Lahteine	44f2a82a56	Move axis_homed, axis_known_position to motion.*	2018-10-31 17:44:42 -05:00
Scott Lahteine	946cf8b453	EEPROM read code grouping	2018-10-31 16:43:46 -05:00
Ludy	f2adb4b9cc	Update German language (#12280 )	2018-10-31 16:40:41 -05:00
Karl Andersson	484ca68228	Fix misplaced parentheses (#12284 )	2018-10-31 15:34:37 -05:00
Scott Lahteine	1d366db764	Tweaks to CR-10S configuration	2018-10-30 23:36:32 -05:00
Scott Lahteine	b5d7f69b51	Followup to #12249	2018-10-30 22:51:45 -05:00
N95JPL	b780b69c62	Use font ascent and descent for line positioning (#12224 )	2018-10-30 22:39:44 -05:00
Scott Lahteine	9cd3529108	Organize language data, fix Korean and Danish	2018-10-30 20:41:16 -05:00
Chris Pepper	66d44c72c3	Add fast binary file transfer to SD card option (#12249 )	2018-10-30 19:44:12 -05:00
Marcio Teixeira	72d8adfd1e	Cleanup and refactor EXTENSIBLE_UI (#12227 ) - Add `axis_t`, `extruder_t`, `heater_t`, and `fan_t` to eliminate ambiguity, improve type safety. - Regularized getter/setter argument order and naming. - `setAxisPosition` no longer stacks moves in the buffer, allowing it to be called repeatedly on each touch ui tap. - Implement better manual moves for `EXTENSIBLE_UI` (#12205) - Calling `setAxisPosition_mm` no longer buffers the entire move to the new position, but instead causes small moves towards it to be made during the idle loop. This allows the user to adjust the destination even after the move has started and makes the UI feel much more responsive. - As suggested by @ejtagle, the new code keeps the planner buffer full to ensure smooth motion without stops and starts. - Change `En`, `Hn` and `FANn` to zero-based indices. - Labels consistent with the rest of Marlin code.	2018-10-30 19:42:26 -05:00
Karl Andersson	1946f729fd	STM32 FastIO using register access (#12276 )	2018-10-30 19:25:44 -05:00
Scott Lahteine	56057bcecd	Fix lcd_impl_status_screen_1	2018-10-30 19:24:16 -05:00
Scott Lahteine	4ed579cafc	Americanized English spelling	2018-10-30 18:55:38 -05:00
Scott Lahteine	9e663a624b	Apply #pragma once to configuration files	2018-10-30 18:35:12 -05:00
Scott Lahteine	98c32d8df1	Fix a config endif label	2018-10-30 18:28:16 -05:00
Scott Lahteine	3583e2b449	Followup to Menu Refactor (#12275 )	2018-10-30 16:34:45 -05:00
TheLongAndOnly	5536228359	G34 Auto-align multi-stepper Z axis (#11302 )	2018-10-29 14:01:36 -05:00
Scott Lahteine	f9b80e7217	Make getfilename_sorted standard for listings	2018-10-29 13:54:21 -05:00
Scott Lahteine	5ead026967	Fix menu_temp_xx_filament_change menu items	2018-10-28 20:43:33 -05:00
Scott Lahteine	d632e44c8c	[Merge] Refactor LCD menus / screens (#12199 )	2018-10-28 18:18:22 -05:00
Ludy	1f9806875c	Update German language (#12261 )	2018-10-28 18:11:55 -05:00
mholeys	63ce8baa55	Fix Teensy 3.5/3.6 ADC access for ADC1 (#12258 )	2018-10-28 15:51:49 -05:00
Scott Lahteine	3a935fd72b	Reduce repetition in menu edit items	2018-10-28 15:46:45 -05:00
Scott Lahteine	b063b1b722	Reorganize includes and declarations	2018-10-28 15:46:45 -05:00
Scott Lahteine	43cf913048	Move SD Card Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	0161d3f733	Move Custom User Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	3b0d2330b6	Move Delta Calibrate Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	6896847210	Move LED Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	9cd5471202	Move Job Recovery Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	9f11e0284c	Move Filament Change Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	d87ab3ed20	Move Advanced Settings Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	587a64d80c	Move Bed Leveling Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	96f313fb41	Move Info Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	423ab029b2	Move Temperature Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	489017995e	Move UBL Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	a489c9fa52	Move Motion Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	3a9ad9f2b1	Move Configuration Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	143d4ec043	Move Tune Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	829effc1fe	Move Main Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	37ff663b02	Convert LIGHTWEIGHT_UI to CPP	2018-10-28 15:46:45 -05:00
Scott Lahteine	a964f098b3	Make dogm status screen a CPP	2018-10-28 15:46:45 -05:00
Scott Lahteine	8055ed24ff	Move font data to a subfolder	2018-10-28 15:46:45 -05:00
Scott Lahteine	774a6e8199	Drop TALL_FONT_CORRECTION	2018-10-28 15:46:45 -05:00
Scott Lahteine	c825c419d4	Convert DOGM / HD44780 impl to CPP files	2018-10-28 15:46:45 -05:00
Scott Lahteine	182b1405d9	LCD conditionals in configurations	2018-10-28 15:46:45 -05:00
Scott Lahteine	2bf18950ab	Refactor LCD menus	2018-10-28 15:46:45 -05:00
Scott Lahteine	ac5f2762b7	Use E_AXIS_N where possible	2018-10-28 15:46:45 -05:00
MasterPIC	6fbc87301f	'G29 H' to set a centered square probe area (linear, bilinear) (#12242 )	2018-10-27 20:30:21 -05:00
Karl Andersson	c1e8bd6add	Remove STM32 board-specific delays (#12243 ) ...and replace with delays for all HAL_STM32 boards.	2018-10-27 17:26:12 -05:00
Scott Lahteine	3c9daf322a	MSG_CNG_SDCARD => MSG_CHANGE_SDCARD	2018-10-27 13:56:29 -05:00
Scott Lahteine	4b7a0a5b39	Require TMCStepper 0.2.2 or newer In reference to #12175	2018-10-27 11:15:28 -05:00
Scott Lahteine	ab8425f1b5	Clean up PROBE_TRIGGERED_WHEN_STOWED_TEST (#12232 )	2018-10-26 19:18:20 -05:00
Chris Rigter	3028a620af	Add RACK_AND_PINION_PROBE (#12218 )	2018-10-26 18:24:24 -05:00
InsanityAutomation	ad60f0691c	Add Creality3D RAMPS pins definitions (#12229 )	2018-10-26 16:09:04 -05:00
Scott Lahteine	5580773191	Use FastIO, sanity-check LPC SD options, apply formatting (#12231 )	2018-10-26 15:23:02 -05:00
Scott Lahteine	d015f746cc	Fix some compile warnings (#12220 )	2018-10-26 03:53:06 -05:00
Scott Lahteine	dacb5324e8	Fix display of Y on Graphical LCD	2018-10-26 01:43:47 -05:00
Scott Lahteine	bf9dd4f4cf	Add helpers for custom text in menu items (#12214 ) For some features it can be useful to write custom text in a menu item. This commit provides helpers to make this easier.	2018-10-25 15:17:53 -05:00
Scott Lahteine	e8031b1152	Add Custom Microstepping options	2018-10-25 11:26:32 -05:00
Scott Lahteine	fbfb48cce0	Indent a block	2018-10-25 10:52:27 -05:00
Marcio Teixeira	1a00d1bdaf	Add pullup to USB interrupt line - A pullup on the INT pin is required when the pin is level-active	2018-10-25 10:42:08 -05:00
TheSFReader	a07ac6312f	G0 feedrate may be fixed or variable (#12172 )	2018-10-25 10:35:16 -05:00
Scott Lahteine	53c535a0c1	Remove trailing whitespace	2018-10-25 09:46:33 -05:00
Roman Moravčík	55dec02ca1	Allow X, Y, Z manual move when cold. (#12209 )	2018-10-25 09:13:52 -05:00
Luc Van Daele	7243101135	z_offset fix for deltas (#12210 )	2018-10-25 09:11:26 -05:00
Scott Lahteine	9613f00877	Fix getProgress_seconds_elapsed to return seconds	2018-10-24 18:05:15 -05:00
gjdodd	5d487ef40e	Fix null exception due to duration_t of zero (#12207 )	2018-10-24 17:59:33 -05:00
Giuliano Zaro	a9061714f2	Update Italian language (#12196 )	2018-10-24 16:40:48 -05:00
InsanityAutomation	aebbb2359d	Fix IDEX homing X0 wrong direction (#12200 )	2018-10-24 16:40:06 -05:00
gjdodd	0a549fd1f2	Fix EXTENSIBLE_UI compile errors (#12206 )	2018-10-24 16:36:11 -05:00
Roman Moravčík	a80ba8fc6e	Slovak translation update (#12202 )	2018-10-24 16:02:38 -05:00
Roman Moravčík	e48cbff10d	Fixed redefinition warnings of MSG_HOTEND_TOO_COLD. (#12203 )	2018-10-24 15:00:07 -05:00
Scott Lahteine	7a04eb3a8b	Fix some comment formatting	2018-10-23 22:35:44 -05:00
Scott Lahteine	2f873a119f	Revert some UBL strings	2018-10-23 15:39:59 -05:00
Ludy	a93e9e6e9b	Use preheat labels in place of PLA/ABS (#12194 )	2018-10-23 15:38:17 -05:00
Karl Andersson	aa72884a6e	Enable use of SERIAL_PORT_2 on HAL_STM32 (#12197 )	2018-10-23 15:24:58 -05:00
Scott Lahteine	46360f18b4	Bring thermistor_75.h up to speed	2018-10-23 14:52:16 -05:00
Scott Lahteine	e229b831fa	Customizable preheat labels	2018-10-23 00:57:50 -05:00
Scott Lahteine	a553ab82e0	Add e index to _lcd_move_distance_menu	2018-10-22 23:35:04 -05:00
Scott Lahteine	3a46212dd8	Better cold extrusion prevention in LCD menu (#12189 )	2018-10-22 20:54:38 -05:00
Marcio Teixeira	fc31da1114	Implement custom delay/millis for EXTENSIBLE_UI (#12188 )	2018-10-22 19:37:48 -05:00
forkoz	3a3ab3391f	Return set_directions() to stepper.cpp (#12182 ) Initial manual Z move can be negative if your stepper is inverted. Leads to bad situations for crashed or initially booted printers.	2018-10-22 19:30:51 -05:00
Scott Lahteine	e5ae7a07d1	Suppress compiler warning	2018-10-21 13:44:27 -05:00
Hannes Brandstätter-Müller	6ee2af5e2d	Simplify pins_TRIGORILLA_14.h (#12162 )	2018-10-21 03:23:20 -05:00
Roman Moravčík	d801f85963	Correct EEPROM read/write disparities. (#12169 )	2018-10-21 02:56:31 -05:00
Scott Lahteine	8d3a92fc4a	Followup to millis_t patch	2018-10-20 23:23:58 -05:00
Ludy	44369d536a	Use millis_t where needed (#12152 )	2018-10-20 23:21:27 -05:00
Scott Lahteine	b641571098	Replace types.h with millis_t.h	2018-10-20 23:07:12 -05:00
Scott Lahteine	eeef4e630a	Fix compile error in leds.h	2018-10-20 23:07:12 -05:00
Scott Lahteine	9969c06cb5	Fix compiler warning	2018-10-20 17:16:59 -05:00
Farkas Péter	427c80119a	Hide some menu items when busy: fix typo (#12164 )	2018-10-20 15:55:31 -05:00
InsanityAutomation	55ac2f4c23	Fix filament runout for idex duplication modes (#12168 )	2018-10-20 13:39:33 -05:00
Karl Andersson	b640b3b0d6	Define ST7920 delays for board ARMED (#12161 )	2018-10-20 13:12:54 -05:00
Marcio Teixeira	2e5e689a7f	Fix kill() and ExtensibleUI (#12160 ) * Fix to isPrintingFromMedia() - isPrintingFromMedia() will now return true even if SD print is paused. - isPrintingFromMediaPaused() allows UI to determine if the print is paused. * Don't use _delay_us in minkill (#12145) - In HAL_DUE, _delay_us is simply an alias for delay, which causes the board to hang and subsequently reboot due to the watchdog timer. * Shorten code with IFSD macro	2018-10-20 01:44:46 -05:00
Scott Lahteine	b381cad399	Clean up trailing whitespace	2018-10-19 15:27:17 -05:00
Scott Lahteine	9090065e9f	Move EXTRA_FAN_SPEED above FWRETRACT	2018-10-19 15:15:00 -05:00
Karl Andersson	4eb798dbdc	Add support for Arm'ed (STM32F4) board (#12147 )	2018-10-19 14:50:52 -05:00
TheSFReader	1fb9b299d4	Add M524 to abort SD printing (#12155 )	2018-10-19 14:25:07 -05:00
Scott Lahteine	d26d9d5b81	Tweak IS_SD_INSERTED	2018-10-19 14:00:36 -05:00
Scott Lahteine	c6a5c74208	Add parentheses to SD macros	2018-10-19 13:52:57 -05:00
Giuliano Zaro	aa9202260d	Fix endstop when no interrupt (#12158 )	2018-10-19 13:45:39 -05:00
Scott Lahteine	8c02dd971b	Move disable_all_steppers to minkill	2018-10-19 13:42:04 -05:00
Scott Lahteine	3847c08f7e	Disable heaters/steppers before message	2018-10-19 13:30:46 -05:00
Marcio Teixeira	71e19baf69	Fix kill => disable_all_heaters => print_job_timer.stop (#12146 ) - Remove `print_job_timer.stop()` from `disable_all_heaters` - Call `print_job_timer.stop()` for relevant `disable_all_heaters()`. - Split up `kill()` for watchdog interrupt safety	2018-10-18 21:20:56 -05:00
Ludy	4cc1c2627e	Update German language (#12143 )	2018-10-18 19:17:37 -05:00
Ludy	75a0d46edf	Fix compile warning re: LCD_INFO_SCREEN_STYLE	2018-10-18 19:16:24 -05:00
Scott Lahteine	a81763c237	Pins E sanity check tweak	2018-10-18 18:48:23 -05:00
Giuliano Zaro	bc22641002	[2.0.x] Updated Italian Language (#12148 )	2018-10-18 18:08:39 -05:00
Michael Triffon	eded90bf87	Updated Azteeg X5 Mini Wifi pins for onboard SD (#12133 )	2018-10-18 11:52:55 -05:00
nhchiu	27a84fd021	Remove unused option in Anycubic Kossel config (#12138 )	2018-10-18 11:47:59 -05:00
Scott Lahteine	67a3c5a16a	Alternative info screen (Prusa-style) (#12132 ) * Fix Z value display * Add HAS_PRINT_PROGRESS * Alternative Info Screen option * Add LCD_INFO_SCREEN_STYLE to example configs	2018-10-18 11:34:52 -05:00
Marcio Teixeira	5b7dd553d3	Fix sd_mmc_spi_mem capacity; clean up USB code (#12134 ) - Fix an error in the return value of `sd_mmc_spi_read_capacity` which was causing the host OS to read beyond the last sector in the card. - Clean up the USB flashdrive code and add better debugging.	2018-10-18 11:34:07 -05:00
Scott Lahteine	df768e7d8f	Followup to #12129	2018-10-18 11:29:49 -05:00
Chris Pepper	3c13c9e3e9	[LPC176x] Fix USEABLE_HARDWARE_PWM macro, cleanup multiple LED support (#12129 )	2018-10-18 11:26:50 -05:00
InsanityAutomation	a768df83cb	Remove stale variable (#12136 )	2018-10-18 11:26:14 -05:00
Hannes Brandstätter-Müller	c36773bffb	Update the Ender-4 example config (#12131 ) - Enable filament change menu - Enable bed-PID - Enable s-curve acceleration - Enable some menu items - Update from Skorpi's new version - Fix extruder steps, deactivate nozzle clean feature	2018-10-17 15:49:52 -05:00
Ludy	9c71bff5e8	Update German language (#12115 )	2018-10-17 11:17:06 -05:00
Nils Hasenbanck	9deb23aa47	Add missing SerialUSB definition for STM32 HAL (#12124 )	2018-10-17 11:14:10 -05:00
Nils Hasenbanck	0519ef0802	Update pins for final RemRam v1.3 board (#12125 )	2018-10-17 11:13:38 -05:00
InsanityAutomation	3ec3872730	Single Z raise value for all tool-changing / parking (#12090 ) * Universal tool-change Z lift * Add TOOLCHANGE_ZRAISE to example configs * Park/unpark changes to example configs * Implement DEBUG_DXC_MODE	2018-10-17 11:11:41 -05:00
Scott Lahteine	6bdbe3299e	Fix a comment	2018-10-17 10:33:54 -05:00
Scott Lahteine	bc75eb2c64	Cleanup for HAL_spi_Due.cpp	2018-10-17 10:33:54 -05:00
AnHardt	d82bcdeea1	Make PULSE_STOP(E) conditional (#12121 )	2018-10-17 09:52:57 -05:00
Chris Pepper	c90e26dfa6	fix normal extruder stepping (#12118 )	2018-10-17 02:47:31 -05:00
Hannes Brandstätter-Müller	96bbda5d48	remove confusing comment (#12120 )	2018-10-17 02:47:03 -05:00
Marcio Teixeira	f98f4ac7ea	Fix and improve EXTENSIBLE_UI (#12117 ) - Add methods to access print counter data - Clean up some inconsistent method names - Clear lcd status after filament change - Implement `lcd_reset_status` so it works like UltraLCD	2018-10-16 16:58:29 -05:00
Scott Lahteine	8bf596bd4c	RETRACT_ZLIFT => RETRACT_ZRAISE	2018-10-16 16:46:40 -05:00
Marcio Teixeira	056561df93	[2.0.x] Enhancements to FILAMENT_RUNOUT_SENSOR (#12069 ) - Added FILAMENT_RUNOUT_DISTANCE_MM option - Added FILAMENT_MOTION_SENSOR option	2018-10-16 07:28:52 -05:00
Scott Lahteine	cce4931342	Clean up recent contribs	2018-10-16 06:45:44 -05:00
Karl Andersson	8b5e51c9aa	STM32F4xx modifications for HAL_STM32 (#12080 )	2018-10-16 06:42:41 -05:00
Scott Lahteine	bf0c809ff2	Update M165 comment	2018-10-16 06:10:27 -05:00
AnHardt	9ac9649183	Mixer - update descriptions (#12108 )	2018-10-16 06:09:02 -05:00
Scott Lahteine	9bf5d4331c	Clear up some compiler warnings	2018-10-16 05:47:02 -05:00
Scott Lahteine	0139762a96	Fix a sanity check	2018-10-16 05:46:33 -05:00
Scott Lahteine	2ecb124e42	Fix trailing whitespace	2018-10-16 03:50:16 -05:00
AnHardt	f56968ba0b	New Continuous Filament Mixer (#12098 )	2018-10-16 03:38:57 -05:00
Ludy	2d2cd628c6	Update German language (#12094 )	2018-10-16 02:59:04 -05:00
Scott Lahteine	84b59d58fb	Clean up whitespace	2018-10-16 02:02:20 -05:00
swilkens	06e2afe8e0	[2.0.x] Reduce HOMING_FEEDRATE_XY for Ender 3 (#12105 ) Homing on the Ender 3 with HOMING_FEEDRATE_XY set to 50*60 was shown (#12074) to cause the end-stop micro-switches to bottom out, causing the carriage for both X and Y axis to physically crash into the micro switch. Reducing the homing speed prevents the switches from bottoming out.	2018-10-16 01:51:47 -05:00
TheSFReader	af939c158a	Option for G0 to have a separate feedrate (#12089 )	2018-10-16 01:49:51 -05:00
Christopher Pepper	e5b4bf22d4	Remove debug output from flash persistent store implementation	2018-10-14 18:43:48 +01:00
Christopher Pepper	42fb7c14b0	Update the sdcard usb sharing config and apply to Re-ARM	2018-10-14 18:43:48 +01:00
Christopher Pepper	254b68fe2c	servo update	2018-10-14 18:43:48 +01:00
Andy Shaw	870bfd08f5	usb and sdcard sharing improvements * Add traceback after watchdog timeout Add the cpability to perform a traceback following a watchdog timeout. * Enhanced hardware SPI Allow use of either SSP0 or SSP1. Ensure that no data is left in I/O buffers after calls to enable sharing of SSP hardware. * Make flash emulation of eeprom the default Make use of flash for eeprom storage the default. This means that usage of eeprom will not cause USB drive mount/unmount operations. * Allow sharing of SD card SD card I/O operations from the USB stack take place in idle loop, rather than at interrupt time. Allowing sharing of the SPI bus. New configuration options to allow usage of the SD card to be specified. * Fix problem with hardware SPI pins	2018-10-14 18:43:48 +01:00
Christopher Pepper	5ddf52d58e	[HAL][LPC176x] Pull out framework into separate repository Framework and build platform now located at https://github.com/p3p/pio-framework-arduino-lpc176x and https://github.com/p3p/pio-nxplpc-arduino-lpc176x respectively fix mkssbase leds move hardware serial remove hardware/software serial Hardware Serial extraction HardwareSerial ISRs fix disabled serial2 causing Serial object to link move usb devices out to framework separate out adc/pwm peripheral function from hal.cpp fix includes remove unused pwm init move adc HAL header update templated filtered adc LPC1769 platform	2018-10-14 18:43:48 +01:00
Roman Moravčík	213e94bce2	[2.0.x] Updated slovak translation (#12059 )	2018-10-14 02:15:15 -05:00
Karl Andersson	a40458405a	Fix datasize error when FWRETRACT is disabled (#12086 )	2018-10-14 02:14:34 -05:00
Scott Lahteine	951b25163e	Extend M217 with configurable park/raise (#12076 )	2018-10-13 23:08:20 -05:00
Kevin Velickovic	ea13a77dcb	Fixed Z-Probes NO/NC for Anycubic Kossel (#12083 )	2018-10-13 20:34:56 -05:00
N95JPL	ab9d5eb38d	Add Bootscreen Animation (#12077 )	2018-10-12 22:11:20 -05:00
Scott Lahteine	26208a5c2f	Clean up some boot screens	2018-10-12 18:56:39 -05:00
Scott Lahteine	9b6be0ae0f	Fix lite status screen SD %	2018-10-12 17:02:59 -05:00
Scott Lahteine	af3bf6c956	Tweak config spacing	2018-10-12 16:09:27 -05:00
Scott Lahteine	a44ef27897	Outdent singlenozzle toolchange code	2018-10-12 15:19:03 -05:00
Scott Lahteine	d338e4d875	Fix singlenozzle toolchange cold extrusion test	2018-10-12 15:15:25 -05:00
Roxy-3D	25b980dddb	Remove erroneous Pin 12 definition There is no switchable Power Supply. Don't put it on Pin 12. (Pin 12 is actually FAN1)	2018-10-12 13:45:04 -05:00
Scott Lahteine	ddaef1a60c	Clean trailing whitespace	2018-10-11 21:40:55 -05:00
Scott Lahteine	1407afad73	Move SENSITIVE_PINS to its own file	2018-10-11 01:10:11 -05:00
Scott Lahteine	45e738876a	Add stepper MS3 support Co-Authored-By: TheLongAndOnly <thelongandonly@users.noreply.github.com>	2018-10-11 01:10:11 -05:00
Giuliano Zaro	d43d4e4219	Refactor PRINTER_EVENT_LEDS, apply to M303 (#12038 ) Co-Authored-By: Giuliano Zaro <gmagician@users.noreply.github.com>	2018-10-10 21:25:43 -05:00
Giuliano Zaro	d8d76cd2ba	[2.0.x] Italian language update (#12060 )	2018-10-10 20:13:10 -05:00
Scott Lahteine	e8d2cf4fb5	EEPROM followup (tmc_stepper_current_t)	2018-10-10 17:25:45 -05:00
Scott Lahteine	50cbca4c55	Hide some menu items when busy	2018-10-10 17:18:33 -05:00
InsanityAutomation	3cb5517ddb	Make singlenozzle tool-change honor no_move (#12056 ) ...Set no move earlier so it applies	2018-10-10 16:49:59 -05:00
InsanityAutomation	d332fcb8fa	Fix firmware-retract compile errors (#12061 )	2018-10-10 16:46:08 -05:00
Scott Lahteine	43940d59ed	Fix trailing spaces	2018-10-10 16:24:35 -05:00
InsanityAutomation	b2c1cd7eda	Allow cold change of active extruder (#12055 ) Followup to #11994	2018-10-10 09:57:48 -05:00
Scott Lahteine	d556dc1865	Fix and improve EEPROM storage (#12054 ) * Clean up Temperature PID * Improve EEPROM read/write/validate * Group `SINGLENOZZLE` saved settings * Group planner saved settings * Group filament change saved settings * Group skew saved settings * Group `FWRETRACT` saved settings	2018-10-10 09:45:20 -05:00
Scott Lahteine	9b5c1a5e77	Fix EEPROM checksum bug Addressing #12048	2018-10-10 06:14:58 -05:00
Scott Lahteine	272d4a5167	Apply #pragma once	2018-10-10 02:57:01 -05:00
Scott Lahteine	07d33849b0	Fix unused var warning, apply ENABLED	2018-10-09 21:31:28 -05:00
Hannes Brandstätter-Müller	a3e8cb1e44	[2.0.x] Ender-4 small improvements in Configuration (#11843 )	2018-10-09 20:58:22 -05:00
Scott Lahteine	cf5284cdf2	Add SD Firmware Update capability (#12043 ) Co-Authored-By: timoxd7 <timoxd7@users.noreply.github.com>	2018-10-09 20:00:47 -05:00
Scott Lahteine	0bd54392b7	Use uint8_t in EEPROM code	2018-10-09 19:00:01 -05:00
Scott Lahteine	ce82015d5f	Fix include in G80	2018-10-09 17:24:56 -05:00
Marcio Teixeira	cef1de89d0	Fixed incorrect axis index. (#12051 )	2018-10-09 16:59:34 -05:00
Marcio Teixeira	d6d48e63fb	Allow #defined TYPE arg to ultralcd menu macros (#12041 ) Previously, it was not possible for the TYPE argument to ultralcd menu macros to itself be a #defined value. This made it difficult to create variables to set many related menu items to a common precision that could be easily changed.	2018-10-08 20:01:00 -05:00
Emilio Moretti	2ef7175b42	Update Ender-2 BED_MAXTEMP (#12042 ) Also added details to the README to make sure the Ender-2 status is properly documented.	2018-10-08 19:57:44 -05:00
Scott Lahteine	5f6aabccbe	Tweak M48 spacing	2018-10-08 19:11:25 -05:00
Marcio Teixeira	ec9aa4f468	[2.0.x] Miscellaneous fixes (#12039 ) * Allow override of soft SPI pins in `pins_.h` Add default case to avoid compiler warning. * Additional pin definitions for Archim 2. * Einsy Retro has same timings as Einsy Rambo.	2018-10-08 18:14:52 -05:00
Marcio Teixeira	906a24fa81	Extensible user interface API (#11193 )	2018-10-08 15:44:05 -05:00
InsanityAutomation	ee253991d4	Various fixups for single-nozzle filament swap (#12036 )	2018-10-08 15:39:55 -05:00
Marcio Teixeira	8dbb305e8e	Fix "Missing separator" errors. (#12035 ) - Makefiles require tabs (not spaces) before shell commands. - Other indentation can either be space or tabs.	2018-10-08 14:28:52 -05:00
Scott Lahteine	55e810d512	Fix G80 compilation	2018-10-08 13:11:36 -05:00
Scott Lahteine	d5017e2788	Add status screen with 4 nozzles	2018-10-08 01:27:21 -05:00
Scott Lahteine	7db0113b53	Improve E_AXIS_N macro	2018-10-07 18:22:05 -05:00
Nils Hasenbanck	191df5e17d	Correct PWM_PIN behavior for STM32 HALs (#12027 )	2018-10-07 17:08:01 -05:00
Sam Lane	f2ecf8d510	Add option to control Solenoids under PARKING_EXTRUDER (#12028 )	2018-10-07 17:07:12 -05:00
InsanityAutomation	74cd6cb4fc	Single nozzle filament change (#11994 )	2018-10-07 17:06:14 -05:00
Scott Lahteine	bfcf570d68	Try ISR_ALIASOF for Endstop Interrupts	2018-10-07 17:05:32 -05:00
Giuliano Zaro	c0d9058e25	Shorten an Italian menu title (#12034 ) …and change a multi-use "back" menu item.	2018-10-07 16:43:48 -05:00
teemuatlut	dffb4c63dc	[2.0.x] TMC2660 followup (#12029 ) * Don't react to s2g on TMC2660. False positives * Init with sensorless probing as well	2018-10-07 15:37:44 -05:00
Scott Lahteine	d6b0fbd771	Use uint8_t for all fan speeds (#12032 )	2018-10-07 15:34:41 -05:00
Scott Lahteine	cb7844c8d4	Save PROGMEM on serial prefixes (#12033 ) With default config and `EEPROM_SETTINGS`, saves over 200 bytes of PROGMEM.	2018-10-07 15:32:15 -05:00
Scott Lahteine	07db08e39d	Fix EXTRUDER_AUTO_FAN_SPEED comment	2018-10-06 19:51:17 -05:00
Scott Lahteine	ca0e308105	Fix up some units comments	2018-10-06 19:45:50 -05:00
Scott Lahteine	65b8f3821b	Suppress temperature.h compile warning	2018-10-06 19:29:41 -05:00
teemuatlut	c447d75916	Add support for TMC2660 (#11998 )	2018-10-06 17:18:10 -05:00
Scott Lahteine	cf0b9eb37c	no need to use destination in do_pause_e_move	2018-10-06 16:43:21 -05:00
Scott Lahteine	e8d677620c	Use NUM_SERVOS in EEPROM code Fix #12015	2018-10-06 15:11:32 -05:00
Scott Lahteine	0fcdfdeed6	Followup to #12017	2018-10-06 13:23:58 -05:00
Phr3d13	acac2adfc8	Add support for MeCreator2 (#12017 )	2018-10-06 12:26:49 -05:00
Thomas Moore	49823a4939	Fix broken jerk handling (#12019 ) Fix #12004	2018-10-06 12:02:50 -05:00
Scott Lahteine	52a37913c1	Extend and apply some corrections	2018-10-06 00:27:21 -05:00
Scott Lahteine	77b9a41f1f	Add G-code extensions to example configs	2018-10-06 00:15:35 -05:00
thesfreader	e09c144674	Add CNC-like G-code options	2018-10-06 00:15:27 -05:00
Scott Lahteine	33056046a3	STM32 non-generic PWM_PIN and USEABLE_HARDWARE_PWM (#12016 )	2018-10-06 00:14:12 -05:00
Scott Lahteine	d5141c4e03	Fix up leading/trailing whitespace	2018-10-05 18:19:59 -05:00
Marcio Teixeira	03fc4d31d0	Makefile support for 32-bit Archim board and new TMC library (#11997 ) * Support new TMC library and 32-bit Archim board - Added IS_MCU flag - When IS_MCU flag is 1, AVR compiler will be used - When IS_MCU flag is 0, ARM compiler will be used - Added support for new TMC library - Added support for a 32-bit Archim board, which could probably be used as a basis for other 32-bit boards.	2018-10-05 16:06:11 -05:00
Scott Lahteine	65b36642f8	Fix Anycubic Kossel config	2018-10-04 20:27:05 -05:00
Scott Lahteine	fc326b3dde	Add USB_FLASH_DRIVE_SUPPORT to examples Co-Authored-By: marcio-ao <marcio@alephobjects.com>	2018-10-04 19:54:12 -05:00
Marcio Teixeira	2067619a26	Add USB_FLASH_DRIVE_SUPPORT	2018-10-04 19:54:12 -05:00
Giuliano Zaro	07fe8d28be	[2.0.x] Partial Italian revert (#12008 ) - Use a comma for decimals just in one message has not been a good idea. - Full comments translation	2018-10-04 14:38:54 -05:00
Scott Lahteine	517b4f4cd4	Fix lightweight UI hotends display	2018-10-04 14:37:24 -05:00
Giuliano Zaro	72a750e0eb	[2.0.x] Update Italian language (#11996 )	2018-10-04 03:03:47 -05:00
Scott Lahteine	bb561baf9e	Tweak some config comments	2018-10-04 02:42:12 -05:00
Nils Hasenbanck	fcf6d127fd	STM32 timer simplification (#11995 ) Prescalers aren't calculated for the given target frequency. Stepper timer should run at 2 Mhz and temperature timer at 72 Khz.	2018-10-03 22:33:24 -05:00
Scott Lahteine	8daadd2c8c	Fix TMC_DEBUG undefined report_tmc_status (#11993 )	2018-10-03 11:56:49 -05:00
Scott Lahteine	c40ea1f0fd	Update EEPROM_VERSION And set EEPROM_OFFSET to 0, since the historical 100 skipped bytes are never used.	2018-10-03 11:34:34 -05:00
Scott Lahteine	1358bd9319	Make MAX_EXTRUDERS always 6	2018-10-03 11:32:19 -05:00
AnoNymous	001f26b642	Template struct simplification for serial (#11990 )	2018-10-03 11:01:21 -05:00
Scott Lahteine	348004c34f	STM32F7 HAL using the official STM32 Arduino Core (#11750 )	2018-10-03 03:26:07 -05:00
Scott Lahteine	3e58b3a5d4	Followup to #11943	2018-10-03 02:55:10 -05:00
teemuatlut	c3229e1b34	Migrate to a new TMC library (#11943 )	2018-10-03 02:48:49 -05:00
brian park	2abf3d258d	Korean language translation support (#11987 )	2018-10-03 01:53:34 -05:00
Eduardo José Tagle	d6955f25b2	Expand serial support in DUE/AVR hals exploiting the templated MarlinSerial classes (#11988 )	2018-10-03 00:47:27 -05:00
Eduardo José Tagle	f6f2246f59	Templatized serial classes (#11982 )	2018-10-02 22:15:30 -05:00
Scott Lahteine	ee53f7d813	Revert header reorg.	2018-10-02 22:09:41 -05:00
Scott Lahteine	d619ba2685	Tweak STM32F4 config	2018-10-02 22:03:00 -05:00
LineF	d777cef837	fixed minimum macro (#11986 )	2018-10-02 21:35:34 -05:00
Scott Lahteine	e3f7b69105	Add PROBING_STEPPERS_OFF (#11984 ) Co-Authored-By: houseofbugs <houseofbugs@gmail.com>	2018-10-02 05:13:58 -05:00
Scott Lahteine	0e5bcdf695	Make DISABLE_INACTIVE_EXTRUDER a simple switch	2018-10-02 04:57:03 -05:00
Scott Lahteine	0dedb3e139	Reorganize some core headers (#11983 )	2018-10-02 04:25:46 -05:00
Thomas Moore	ab4549d2bc	[2.0.x] Add simultaneous retraction for mixing extruder (#11941 )	2018-10-01 23:32:02 -05:00
Scott Lahteine	c75f5a376b	Tweak some comments	2018-10-01 18:34:14 -05:00
Scott Lahteine	f4c625d3a1	Ensure MIN/MAX overrides	2018-10-01 05:32:55 -05:00
Scott Lahteine	3019713402	Reorganize some enums	2018-10-01 05:32:55 -05:00
Scott Lahteine	606a4362b3	Reduce STM32F4 compile warnings	2018-10-01 04:41:17 -05:00
Scott Lahteine	b3154b2120	Apply MOVE_Z_WHEN_IDLE to example configurations Co-Authored-By: dot-bob <gibben@gmail.com>	2018-10-01 01:41:11 -05:00
dot-bob	b0fd8f2d74	Add option to move Z on double-click when idle	2018-10-01 01:41:11 -05:00
Scott Lahteine	389376c40e	Clean up softspi.h	2018-10-01 01:29:48 -05:00
Scott Lahteine	e78bdd654d	Clean up BABYSTEP options	2018-10-01 01:29:21 -05:00
InsanityAutomation	8ae113ff36	Show zprobe_zoffset when BABYSTEP_HOTEND_Z_OFFSET is disabled (#11973 )	2018-10-01 00:30:10 -05:00
InsanityAutomation	2e98437392	Clean up main menu (#11972 )	2018-10-01 00:15:06 -05:00
InsanityAutomation	6d862b2916	Home before level corners, if needed (#11976 ) …and add a consistent homing screen for all LCD pre-homing.	2018-10-01 00:14:28 -05:00
Scott Lahteine	11ac75edcb	Use PGM_P for PSTR pointers (#11977 )	2018-09-30 23:44:33 -05:00
InsanityAutomation	4d5566a6b7	Add filament runout sensor menu item (#11971 )	2018-09-30 21:33:46 -05:00
Scott Lahteine	8489673cea	Adjust some HAL formatting	2018-09-30 21:24:37 -05:00
Scott Lahteine	fb8a07660a	Followup to minmax patch Co-Authored-By: Palatis <palatis@gmail.com>	2018-09-30 21:17:31 -05:00
Scott Lahteine	3c40933713	Remove trailing spaces, old comment	2018-09-30 20:47:06 -05:00
Hannes Brandstätter-Müller	a3ec805c97	Anycubic Kossel Linear+: corrected DELTA_DIAGONAL_ROD (#11964 )	2018-09-30 05:41:26 -05:00
AnoNymous	b30ca652ae	Replace MIN# / MAX# with variadic MIN / MAX (#11960 )	2018-09-30 04:59:14 -05:00
Scott Lahteine	e10f730478	Tweak vector_3::apply_rotation	2018-09-30 01:51:33 -05:00
Scott Lahteine	e2ab78d876	Fix SERIAL_PORT_2 sanity check	2018-09-30 00:24:10 -05:00
AnoNymous	a644d8cb93	Avoid copies in vector and matrix (#11959 )	2018-09-29 23:04:40 -05:00
Scott Lahteine	693865a649	Fix some whitespace	2018-09-29 22:36:36 -05:00
Scott Lahteine	9903305dda	Merge pull request #9582 from tcm0116/2.0.x-sensorless_probing [2.0.x] Add TMC2130 sensorless probing	2018-09-29 21:02:22 -05:00
Scott Lahteine	14df753086	Correction for block->mix_steps Fix #11484	2018-09-29 19:13:17 -05:00
Alexander Amelkin	2ecfda80ac	Improve support for JTAG/SWD pins reuse (#11963 ) STM32 can reuse JTAG and SWD pins separately. Add `DISABLE_DEBUG` option to disable both interfaces and retain `DISABLE_JTAG` to disable JTAG only.	2018-09-29 19:00:49 -05:00
Scott Lahteine	bb47009656	Apply sensorless changes to example configs	2018-09-29 18:54:14 -05:00
Thomas Moore	3286325044	Add TMC2130 sensorless probing	2018-09-29 18:54:14 -05:00
Scott Lahteine	7d5c336c56	Corrections for dylsexic TMC	2018-09-29 18:51:11 -05:00
Scott Lahteine	d89d8fe852	Fix Busy State in temperature.cpp Fix #11954	2018-09-29 17:03:35 -05:00
Giuliano Zaro	70e7a465d8	[2.0.x] Fix compile error (#11951 ) Fix compile error intruduced with M109 modification	2018-09-29 13:48:23 -05:00
Hannes Brandstätter-Müller	935b120949	Anycubic Kossel: probe closer to the edge (#11950 )	2018-09-29 02:26:16 -05:00
Scott Lahteine	1410e79e7f	Ensure M109 handles autotemp	2018-09-29 02:12:06 -05:00
Scott Lahteine	e4389f7d23	Standard methods to wait for heating (#11949 )	2018-09-29 01:44:47 -05:00
Scott Lahteine	bdc9889d3a	Fix a sanity check	2018-09-29 00:24:25 -05:00
Scott Lahteine	321f9140d1	Followup to #11904	2018-09-28 20:04:40 -05:00
InsanityAutomation	23114aeb81	Fix garbled M119 output. Honor NUM_RUNOUT_SENSORS (#11948 )	2018-09-28 19:00:11 -05:00
Scott Lahteine	1667ed9d1c	Pause should use ECHOLNPGM	2018-09-28 18:15:38 -05:00
Victor Tseng	93839e2f73	Add option to enable/disable autoretract altogether (#11904 )	2018-09-28 16:52:56 -05:00
Scott Lahteine	ad21a4f07b	Tweaks to HAL format and order	2018-09-28 15:59:50 -05:00
Scott Lahteine	b682a1961a	Tweak STM32F7 TMC2660 class	2018-09-27 21:13:15 -05:00
Scott Lahteine	a0a3b23e35	Reduce Raptor bootscreen by 144 bytes	2018-09-27 18:24:40 -05:00
InsanityAutomation	95d793456b	Add Formbot Raptor config, fix other Formbot configs (#11926 )	2018-09-27 19:20:43 -04:00
Mitch Roote	d016b572e3	[2.0.x] Add pin configuration for Fysetc F6 (#11932 )	2018-09-27 19:20:19 -04:00
Alexander Amelkin	84926b1d5a	HAL general support for DISABLE_JTAG option (#11211 ) Some STM32-based boards may use multiplexed JTAG pins as IO. Up to now the `DISABLE_JTAG` option (defined in pins files) was only supported for AT90-based boards. This commit generalizes the code and adds support for boards based on STM32F1 and STM32F4.	2018-09-27 19:02:50 -04:00
Scott Lahteine	c575c5d5f6	Bring example configs up to date (#11939 )	2018-09-27 18:47:26 -04:00
Scott Lahteine	6b1a4f30a8	Fix case of T-Rex 3 _Statusscreen.h	2018-09-27 17:00:55 -05:00
Scott Lahteine	ab7bfa86e2	Fix case of T-Rex-3 _Statusscreen.h	2018-09-27 17:00:55 -05:00
Scott Lahteine	241168926d	Update some configs	2018-09-27 16:42:59 -05:00
Scott Lahteine	cb6454118c	Workaround for Pronterface M29	2018-09-27 16:27:02 -05:00
Victor Tseng	eeab4141db	[2.0.x] Anycubic Trigorilla 14 pins tweak (#11869 )	2018-09-27 16:06:21 -04:00
InsanityAutomation	cb9dc56630	Add GT2560 v3 support (#11914 )	2018-09-27 15:13:15 -04:00
InsanityAutomation	f2e630a05e	Stow probe on probing failed (#11936 ) Prevents probe from being left down should probing fail and print job continue	2018-09-27 13:26:14 -04:00
Hannes Brandstätter-Müller	0b602ae101	[2.0.x] Fix Anycubic Kossel with Probe V1, stuck LCD message after stow (#11929 )	2018-09-27 13:23:53 -04:00
Giuliano Zaro	dc11131656	[2.0.x] fix possible race condition (#11923 ) Fix some commits done in #11900	2018-09-25 13:56:57 -04:00
Scott Lahteine	d6b9327c11	Followup for Endstop Noise Threshold Followup to #11912	2018-09-25 13:50:49 -04:00
Scott Lahteine	aa6e8e9325	Tweak some config comments	2018-09-25 13:42:28 -04:00
Scott Lahteine	5490a664f5	Expose: Homing Validation and Endstop Noise Threshold (#11912 )	2018-09-24 21:59:12 -04:00
Scott Lahteine	cee34f7290	Followup for BABYSTEP_HOTEND_Z_OFFSET (#11916 )	2018-09-24 21:46:56 -04:00
teemuatlut	884ad75cb8	Update config files	2018-09-24 17:26:18 -04:00
Giuliano Zaro	18e456d38d	[2.0.x] fix home endstop bug (DON'T MERGE, needs discussion) (#11900 )	2018-09-24 16:56:01 -04:00
Scott Lahteine	6742026568	Followup for 6 extruders	2018-09-24 14:36:50 -04:00
Scott Lahteine	04bdff4115	Add a blank line	2018-09-24 12:49:02 -04:00
Marcio Teixeira	ccbd045f02	Fixed warning about comparing signed to unsigned (#11909 )	2018-09-24 12:03:29 -04:00
InsanityAutomation	1104054d73	2.0 IDEX Independent z offset and other fixes (#11862 ) * Add Formbot Raptor board Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com> * Add a second Z probe Z offset Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com> * Modify method to utilize live adjustment of hotend z offset Should probably move config option to babystepping and rename as it may now apply to all multiextruder systems * Move config item and catchup other code to current method	2018-09-24 09:40:48 -05:00
Scott Lahteine	217e0efd20	General option PAUSE_BEFORE_DEPLOY_STOW (#11905 )	2018-09-24 00:43:43 -04:00
Scott Lahteine	849dea92a8	Move probe extras below probe types	2018-09-23 23:23:07 -04:00
Scott Lahteine	a2b0260f0f	Update Sublime files	2018-09-23 19:59:08 -04:00
Hannes Brandstätter-Müller	a4cdffdd69	Support for manually deployed fixed probes (#11899 )	2018-09-23 19:59:08 -04:00
Scott Lahteine	ddcbf80f23	Followup for Z_TRIPLE_ENDSTOPS	2018-09-23 12:22:31 -04:00
Marcio Teixeira	c411e7eb0d	[2.0.x] Squelch compiler warnings seen with -Wall (#11889 )	2018-09-23 12:00:34 -04:00
Roxy-3D	83105590a0	Better default values for Mesh Inset	2018-09-22 03:25:18 -04:00
Roxy-3D	4163c1a514	Fix end stop and Z-probe reporting logic	2018-09-22 03:25:18 -04:00
Scott Lahteine	ea9eb2fc8f	Fix servo angles in config-store	2018-09-21 15:41:36 -04:00
Roxy-3D	d3d6be8210	Add MAX7219 reverse units option (#11860 )	2018-09-19 18:54:51 -05:00
Scott Lahteine	beab9733f8	Remove extra clauses in config-store	2018-09-19 17:06:51 -05:00
Scott Lahteine	5a74b12b45	Followup to #11769	2018-09-19 16:40:32 -05:00
InsanityAutomation	f38570ac55	Add custom user menu title (#11769 )	2018-09-19 15:04:34 -05:00
Scott Lahteine	17494099a9	Fix parking_extruder_tool_change Fix #11872	2018-09-19 03:02:07 -05:00
Scott Alfter	140caf99b8	E0_CS_PIN moved from A13 to A15 on RAMPS-FD v2.2 (#11865 )	2018-09-18 22:24:20 -05:00
Scott Lahteine	10590c2f80	Fix some fan conditionals	2018-09-18 21:23:33 -05:00
Scott Lahteine	e4ee607fc8	Fix Dual X FRS in M600 Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>	2018-09-18 21:23:33 -05:00
Scott Lahteine	bae8f82ba8	[2.0] Fix Mixing Extruder mixing factors (#11861 )	2018-09-18 01:10:41 -05:00
Scott Lahteine	c5e5cc5e9f	Fix some trailing whitespace, macros	2018-09-17 17:30:04 -05:00
AnHardt	54bd124665	2.0.x: Fix normalize_mix() (#11856 ) Mix factors needed to be updated consistent with the recent Stepper/Planner code refactor.	2018-09-17 16:37:38 -05:00
Roxy-3D	5fbfbde532	Fix example file to pull in correct pins file	2018-09-17 10:41:30 -05:00
Roxy-3D	378f354939	IDEX Scaled Duplication is still under development Take it out of the menu until it is tested and working.	2018-09-17 10:26:44 -05:00
Scott Lahteine	65045ba54b	tmc_util fix part 2 Followup to `115abf9`	2018-09-17 05:36:17 -05:00
Scott Lahteine	09a2bee8aa	Support more filament runout sensors in M119 (#11851 )	2018-09-17 03:27:13 -05:00
Scott Lahteine	115abf9c53	Fix syntax error in front of `tmc_axes`	2018-09-17 01:10:20 -05:00
Roxy-3D	0780913848	IDEX Improvements (#11848 )	2018-09-17 01:06:22 -05:00
Scott Lahteine	39732838b4	Tweak indent of Chinese languages	2018-09-17 00:58:32 -05:00
Scott Lahteine	53bd0b55cb	Followup for 6 extruders	2018-09-16 23:57:50 -05:00
Scott Lahteine	1718eff54a	Code changes supporting up to 6 extruders	2018-09-16 22:32:53 -05:00
Scott Lahteine	f5c210d33d	Config changes supporting up to 6 extruders	2018-09-16 22:22:35 -05:00
Scott Lahteine	d948c6e867	RADDS Extension Board V3 support	2018-09-16 22:22:35 -05:00
Thomas Moore	c437bb08f1	Overhaul of the planner (#11578 ) - Move FWRETRACT to the planner - Combine leveling, skew, etc. in a single modifier method - Have kinematic and non-kinematic moves call one planner method	2018-09-16 21:24:15 -05:00
Scott Lahteine	8323a08642	Clean up some whitespace	2018-09-16 19:44:21 -05:00
Scott Lahteine	6286afd456	Add Triple-Z options to example configs	2018-09-16 00:35:58 -05:00
Holger Müller	1a6f2b29b8	Add support for Triple-Z steppers/endstops	2018-09-16 00:35:58 -05:00
Hannes Brandstätter-Müller	bc06406d7d	Fix Anycubic Kossel config (probe crash) (#11832 )	2018-09-15 23:27:21 -05:00
Scott Lahteine	66f83d33e6	Fix some config comments	2018-09-15 23:21:55 -05:00
Hannes Brandstätter-Müller	84ed9b5a63	Send "G33 S P1" for Delta Height Calibration (#11831 )	2018-09-15 20:17:35 -05:00
Scott Lahteine	215eee4fe5	Use 'friend' to access set_directions	2018-09-15 20:11:10 -05:00
Cassiano Leal	ff51e7322d	Fix for Stepper::set_directions() compilation error (#11838 )	2018-09-15 19:31:51 -05:00
Scott Lahteine	809b232fa2	Fix stepper directions after M501/M502 See https://github.com/MarlinFirmware/Marlin/issues/11103#issuecomment-421387611 Co-Authored-By: tcm0116 <tcm0116@users.noreply.github.com>	2018-09-14 20:00:55 -05:00
Scott Lahteine	f79a5a9dee	Tweak spacing of L6470 options	2018-09-12 23:18:11 -05:00
Hannes Brandstätter-Müller	c37d3ae97d	[2.0.x] Fix NOZZLE_PARK_FEATURE for Anycubic Kossel (#11812 )	2018-09-12 15:37:38 -05:00
HenningJW	4fb2134f00	Fix non-sensical values for Zonestar themistor table (#11817 ) Values taken from Zonestar firmware for P802QA with a Melzi board. Timestamps from the firmware package are from April 2016.	2018-09-12 15:36:04 -05:00
Scott Lahteine	b220a825a7	Fix raw_filwidth_value error	2018-09-12 04:31:55 -05:00
Scott Lahteine	1933d5d6fb	Fix SD autostart with no LCD	2018-09-12 03:49:59 -05:00
Roman Moravčík	8bce5370c7	Updated slovak translation (#11807 )	2018-09-12 03:29:17 -05:00
Giuliano Zaro	64d629ba2a	[2.0.x] Italian language fix (#11796 )	2018-09-12 03:28:22 -05:00
Scott Lahteine	8584d3697d	Fix servo count define conflict `MAX_SERVOS` => `NUM_SERVO_PLUGS`	2018-09-11 16:20:31 -05:00
Scott Lahteine	06949ae510	Fix MSG_FILAMENT_CHANGE_HEAT_1 for small LCD	2018-09-10 23:21:37 -05:00
Scott Lahteine	d882717d98	Save some PROGMEM with constexpr (#11798 ) When possible, make `active_extruder` a `constexpr` to save some PROGMEM.	2018-09-10 23:09:26 -05:00
Sam Lane	4f883d5971	[2.0.x] Extruder-Distinct Linear Advance K Factors (#11789 )	2018-09-10 22:37:32 -05:00
Scott Lahteine	fe9f088d60	[2.0.x] Anycubic LinearPlus, Trigorilla 1.4 (#11730 )	2018-09-10 21:25:40 -05:00
Scott Lahteine	b6aae2b322	Tweak RAMPS_FD_V1 pins	2018-09-10 15:43:03 -05:00
Scott Lahteine	7391e23332	Fix RigidBoard FAN_PIN collision	2018-09-10 05:29:00 -05:00
Scott Lahteine	53b8c3bd66	Add EXTERNAL_CLOSED_LOOP_CONTROLLER to examples	2018-09-10 03:17:17 -05:00
Sam Lane	1b6bc19427	Add external closed loop controller support	2018-09-10 03:17:17 -05:00
Marcio Teixeira	2ebfe90be9	Add custom preheat temp to filament change (#11475 )	2018-09-10 02:51:46 -05:00
Karl Andersson	69d0ed5791	[2.0.x] Fix ambiguous function call (SERIAL_PROTOCOL_F) when using Arduino_Core_STM32 (#11747 )	2018-09-10 02:36:06 -05:00
Scott Lahteine	d32c4efc77	Fix some trailing whitespace	2018-09-10 01:26:20 -05:00
Alexander Amelkin	bc1ba998b2	[2.0.x] Fix undefined symbol 'g29_in_progress' (#11781 )	2018-09-09 22:06:03 -05:00
InsanityAutomation	bad225dc04	Fix mesh leveling compile errors (#11768 )	2018-09-09 04:19:48 -05:00
Sam Lane	d783400330	Updates to STM32F7 HAL, for completeness (#11770 )	2018-09-09 03:26:15 -05:00
Scott Lahteine	72af8e0f02	Patch extruder_advance_K edit menu Fix #11776	2018-09-09 03:21:08 -05:00
Sebastianv650	7e8c073fba	Fix extruder stops extruding with LA (#11758 )	2018-09-09 00:04:14 -05:00
Scott Lahteine	0c01099f17	hop_amount => current_hop	2018-09-08 21:20:37 -05:00
Scott Lahteine	eafd62308e	Use TMC2208Stepper v0.2.5 (#11714 )	2018-09-08 20:41:21 -05:00
Kevin	e25d2ae4a2	[2.0.x] SWITCHING_TOOLHEAD (#11623 )	2018-09-08 01:43:24 -05:00
Alexander Amelkin	f417408df1	[STM32F1] Fix HAL for new PlatformIO (#11749 )	2018-09-07 18:15:32 -05:00
Roxy-3D	3d7f2c1fde	Fix directory name to be consistent (#11745 )	2018-09-06 14:10:40 -05:00
Roxy-3D	a9c98a0e47	Create _Bootscreen.h	2018-09-06 10:24:03 -05:00
Roxy-3D	9f85d3a9cb	Create _statusscreen.h	2018-09-06 10:23:20 -05:00
Roxy-3D	e2e7b1d705	Break out support of the T-Rex 3	2018-09-06 10:20:20 -05:00
Roxy-3D	67996c2b66	Break out support for the T-Rex 3	2018-09-06 10:19:05 -05:00
Roxy-3D	9c8d9d282f	Break out support for Formbot T-Rex3 from previous versions	2018-09-06 09:49:04 -05:00
Roxy-3D	e3aac59637	Create pins_FORMBOT_TREX3.h	2018-09-06 09:46:23 -05:00
Roxy-3D	f580247581	Create pins_FORMBOT_TREX2.h	2018-09-06 09:45:29 -05:00
Roxy-3D	073857646b	seperate the T-Rex2 and T-Rex3 support	2018-09-06 09:43:43 -05:00
Roxy-3D	fe4fc2883b	Add support for Formbot T-Rex3	2018-09-06 09:41:59 -05:00
Scott Lahteine	2a61c9a939	Various fixups to configs, spacing, etc.	2018-09-06 06:44:31 -05:00
Scott Lahteine	b3efbc6e6e	Add MANUAL_E_MOVES_RELATIVE to more configs	2018-09-06 02:09:14 -05:00
Scott Lahteine	679e4602fe	Add MANUAL_E_MOVES_RELATIVE to examples	2018-09-06 02:00:25 -05:00
Marcio Teixeira	beb51c2d58	Show manual extrusion moves as relative in LCD - Implements FR#11724 - Old behavior can be restored by commenting out MANUAL_E_MOVES_RELATIVE	2018-09-06 02:00:25 -05:00
Scott Lahteine	d10f29ae2e	Pass segment length in G2-G3	2018-09-06 01:43:27 -05:00
Scott Lahteine	dcfde2317f	Pass segment length in prepare_kinematic_move_to (#11737 )	2018-09-06 01:40:22 -05:00
Roxy-3D	d5379ee9d6	Fix search for white space in enqueued commands	2018-09-05 16:57:08 -05:00
Roxy-3D	8d5bea073b	Assume one Max7219 unit if not specified	2018-09-05 14:18:13 -05:00
Roxy-3D	9651ceb36b	Correct spelling of #endif	2018-09-05 10:46:08 -05:00
Scott Lahteine	b213a89ef5	Sanity-check NOZZLE_PARK_POINT	2018-09-05 06:18:08 -05:00
Scott Lahteine	86ee74731e	Comment for RADDS + RRDFGSC	2018-09-05 05:45:17 -05:00
Kevin	ae1271b2ae	RADDS: Update Full Graphic Display Pins (#11731 )	2018-09-05 03:51:54 -05:00
Scott Lahteine	650d4313c4	Bring some configs up to date	2018-09-05 03:49:24 -05:00
AnHardt	530a13ab6c	[2.0.x] SECURITYFIX missing max temp error when PID is used (#11717 )	2018-09-05 01:41:45 -05:00
Scott Lahteine	12fded46c2	Correct some FR strings Co-Authored-By: pipersw <pipersw@users.noreply.github.com>	2018-09-04 04:00:22 -05:00
Michael Triffon	aefc2f7cf9	Add Anet A2 and A2 Plus Configurations (#11677 )	2018-09-03 23:38:51 -05:00
scott0122	72fdb6bab3	Fix SWITCHING_NOZZLE zdiff (#11683 )	2018-09-03 23:24:40 -05:00
Scott Lahteine	8b837dc3ad	No need for last \n in G-code items	2018-09-03 23:23:20 -05:00
Scott Lahteine	d1ceaf5550	[2.0.x] Followup to IDEX changes (#11707 )	2018-09-03 23:15:31 -05:00
Roxy-3D	d62f4df0b7	Disable LCD Pins used by new Max7219 hook up if in that mode	2018-09-03 09:56:25 -05:00
Roxy-3D	fa772c31bf	Provide more options for Max7219 connection on Formbot	2018-09-03 09:52:36 -05:00
Scott Lahteine	8e18e48d49	Merge pull request #11610 from Freeviv/bugfix-2.0.x [2.0.x] Editable servo angles	2018-09-03 03:55:38 -05:00
Giuliano Zaro	59e76e5fdf	[2.0.x] Fix planner computation (#11708 ) Fix #11697	2018-09-03 00:29:29 -05:00
Roxy-3D	509ee44611	Boot and status file should not have been added to main directory!	2018-09-02 10:25:36 -05:00
Roxy-3D	f8abe12a9c	Boot and status file should not have been added to main directory!	2018-09-02 10:25:13 -05:00
Roxy-3D	7680b64aa6	IDEX clean up (#11690 )	2018-09-02 10:18:59 -05:00
teemuatlut	49e107cea9	Restrict SW serial to AVR (#11696 )	2018-09-01 15:24:44 -05:00
Scott Lahteine	18f1af2dca	Fix up Teensy tests, servo sanity	2018-09-01 01:10:20 -05:00
Scott Lahteine	74a04aed55	Fix compile error with NO_LCD_MENUS	2018-08-31 19:16:04 -05:00
Scott Lahteine	509e1cf2bd	Add *_DRIVER_TYPE to remaining configs	2018-08-31 19:07:17 -05:00
Scott Lahteine	d55f44edba	Printcounter improvements (#11689 )	2018-08-31 17:40:39 -05:00
Scott Lahteine	6a3207391f	Remove obsolete HAL_timer_restrain	2018-08-31 16:17:22 -05:00
Scott Lahteine	e3fc9aa35f	Update some config comments	2018-08-31 16:03:44 -05:00
Scott Lahteine	136860e8bb	Sanity-check SERVO pin for servo probes	2018-08-31 15:47:47 -05:00
Roman Moravčík	66de50f5f8	Updated slovak translation (#11684 )	2018-08-31 15:37:49 -05:00
scott0122	ada85d5585	Improve HOTEND OFFSET Z display precision to 3 (#11686 )	2018-08-31 15:15:40 -05:00
scott0122	607c1e58d9	Improve HOTEND OFFSET Z display precision to 3 (#11685 )	2018-08-31 15:14:33 -05:00
Scott Lahteine	3e81745e81	Fix issues, make optional	2018-08-29 17:58:02 -05:00
Jan	aa80e448e2	Store servo angles in EEPROM	2018-08-29 17:58:02 -05:00
Scott Lahteine	9953213513	Add EDITABLE_SERVO_ANGLES to example configs	2018-08-29 17:57:52 -05:00
Marcio Teixeira	0966bdcbc4	Reorganized ultralcd menu (10317) (#10360 ) Replaced "Prepare" and "Control" menus with "Movement", "Temperature", "Configuration" and "Advanced Settings"	2018-08-29 16:51:14 -05:00
Scott Lahteine	e40a3eef04	Support for Anet A2 Plus	2018-08-29 03:39:43 -05:00
Scott Lahteine	32e38fee74	Update Controller Fan for Y2,Z2	2018-08-29 01:49:48 -05:00
Jeonghwan Roh	59cf217e77	Fix 5 mixing steppers	2018-08-29 01:49:48 -05:00
Scott Lahteine	2a2e8c314e	Suppress emergency parser G-code errors Co-Authored-By: srieche <srieche@users.noreply.github.com>	2018-08-29 01:04:55 -05:00
Ilya Bukhonin	7ecb8b4af5	[2.0.x] Teensy 3.1 and 3.2 support (#11460 )	2018-08-27 21:49:49 -05:00
Pablo Crespo	409a0632af	[2.0.x] Add Morpheus Board support (#11651 )	2018-08-27 21:28:03 -05:00
Marcio Teixeira	0f14977b5d	LIGHTWEIGHT_UI: Allow feedrate % to exceed 255% (#11656 ) - Changed type of integer used for feedrate percentage from uint8_t to uint16_t.	2018-08-27 21:26:32 -05:00
scott0122	6dc9553aa5	Fix SWITCHING_NOZZLE compile error (#11657 )	2018-08-27 21:25:25 -05:00
Scott Lahteine	a15e570d3b	Fix SD progress with Lite Status Screen Co-Authored-By: Lê Hoàng <icy.lord.love.angel@gmail.com>	2018-08-26 17:12:05 -05:00
Scott Lahteine	66966dbd69	Tweak comments for newer multiplexer	2018-08-25 17:00:49 -05:00
Scott Lahteine	933d833ec8	Tweak some Anet A6 comments	2018-08-24 21:50:53 -05:00
Scott Lahteine	d1c9517903	Followup to hotend_offset[Z] patch	2018-08-24 21:32:00 -05:00
Scott Lahteine	e2b8fc4f17	Reduce some debug strings	2018-08-24 21:11:39 -05:00
Chris Pepper	b71c2b8651	[2.0.x] Update LPC176x tests, fix clean script (#11617 )	2018-08-24 18:53:24 -05:00
Scott Lahteine	a317bb4991	Remove stray tab	2018-08-24 17:35:13 -05:00
Scott Lahteine	acf5ae3083	!ENABLED => DISABLED	2018-08-24 16:36:37 -05:00
Scott Lahteine	ba1919c1eb	HAL tweaks to LPC1768 main	2018-08-22 17:16:18 -05:00
Scott Lahteine	0987ed2a18	Use American English	2018-08-22 17:16:18 -05:00
Kevin	6483285bc5	HOTEND_OFFSET_Z always available (#11603 )	2018-08-22 00:21:29 -05:00
Michael Triffon	f8c52c9c29	Azteeg X5 Mini WiFi support (#11601 )	2018-08-21 23:58:26 -05:00
jneilliii	3671c63cde	Einsy Full Graphic LCD Fix (#11604 ) Fixed issue with LCD timings for Einsy RAMBo board.	2018-08-21 23:43:52 -05:00
Colin Gilgenbach	593d5375ea	Fix G28 resetting DUAL_NOZZLE_DUPLICATION_MODE (#11605 ) There's no reason for G28 to reset DUAL_NOZZLE_DUPLICATION_MODE, because it only affects the E stepper, unlike DUAL_X_CARRIAGE which affects the X steppers as well.	2018-08-21 23:42:55 -05:00
Scott Lahteine	f0dbe61692	Tweaks to motion.h reachable tests	2018-08-21 23:34:29 -05:00
Scott Lahteine	2d3317a35b	Prettify Dual X Carriage description	2018-08-21 23:34:29 -05:00
Roxy-3D	cd9868f442	Make position_is_reachable() smarter about IDEX machines` On many IDEX machines the allowed travel of the X1 carraige and X2 carraige does not perfectly overlap. This helps the issue. But more work needs to be done at the higher level. (For example the X1_MAX_POS should probably be factored into G26's mesh validation pattern.)	2018-08-21 19:12:26 -05:00
Scott Lahteine	97f6396b25	Fix RE_ARM LCD pins to avoid #undef	2018-08-21 12:47:40 -05:00
Scott Lahteine	0e25f66c09	Fix Ultimaker servo pin As pointed out at https://github.com/MarlinFirmware/Marlin/issues/7981#issuecomment-407116642	2018-08-21 11:39:53 -05:00
Scott Lahteine	ad12b9b46b	Fix indentation, whitespace, spelling, formbot pins...	2018-08-21 09:47:57 -05:00
Scott Alfter	b5537dde7f	need to add E2END to pins_RAMPS_FD_V2.h (#11564 )	2018-08-21 02:16:31 -05:00
Scott Lahteine	8f0bbdcc9b	Fix up Max7219 orientations (#11596 )	2018-08-21 02:06:18 -05:00
jmz52	a77f8c6dd5	Implement servo support for STM32F1 (#11580 ) Implement servo support for STM32F1. Original code was incomplete and depended on Servo library from stm32duino which conflicts with `module/servo.h`.	2018-08-20 21:13:51 -05:00
Dave Johnson	0456caf0ad	Consolidate shared HALs and isolate HAL compile (#11552 )	2018-08-20 21:11:12 -05:00
jmz52	dfe18ac633	Fix compilation error for STM32F1 with U8GLIB_SSD1306 or U8GLIB_SH1106 enabled (#11583 ) The `binary.h` file required by `lcd/dogm/dogm_bitmaps.h` is not present in stm32duino environment. Binary macros are defined in `bit_constants.h` in stm32duino framework.	2018-08-20 20:37:56 -05:00
Roxy-3D	b0a8ce59bd	Update Boards.h to include Formbot support	2018-08-20 16:46:27 -05:00
Roxy-3D	62ce937540	Update pins.h to include the Formbot board	2018-08-20 16:44:54 -05:00
Roxy-3D	a82be36d5d	Create pins_FORMBOT.h	2018-08-20 16:43:42 -05:00
ghent360	00d24a8219	Don't call __delay_4cycles for 0 cycle delay - takes a really long time. (#11586 )	2018-08-18 22:50:11 -05:00
Scott Lahteine	56f1e17a25	[2.0.x] Max7219 cleanup, simplify, and extend (#11575 )	2018-08-18 01:33:13 -05:00
jmz52	0b2d686160	Fix "SD init fail" problem for STM32F1 (#11579 ) Fix "SD init fail" problem for STM32F1 caused by incorrect SS pin state and incorrect SPI mode. Issue #11225	2018-08-17 23:27:10 -05:00
Scott Lahteine	a98f21ec5e	Marlin assumes signed chars	2018-08-16 22:52:42 -05:00
Kevin	db30650731	Fix UBL/Homing (#11566 )	2018-08-16 08:28:40 -05:00
Roxy-3D	aae4c67e5d	Max7219 Clean Up (#11563 ) Some of the Rotations did not do the right thing with setting and clearing pixels. I think it is correct now. But if not... It is much closer to being correct.	2018-08-15 21:22:28 -05:00
InsanityAutomation	9de730b2bf	Update tool_change.cpp (#11559 )	2018-08-15 19:30:52 -05:00
InsanityAutomation	c2553f9888	2.0.x - Idex match119 (#11556 ) * Update ubl_G29.cpp * Update ultralcd.cpp	2018-08-15 13:26:11 -05:00
Roxy-3D	e9de321ac0	declare void Max7219_register_setup();	2018-08-15 10:36:51 -05:00
Scott Lahteine	952a1bc9d5	Merge pull request #11551 from thinkyhead/bf2_trinamic_fixes [2.0.x] Fix TMC2208 SW serial communication	2018-08-14 19:07:08 -05:00
petrzjunior	67613bf5bd	Update Czech translations (#11510 )	2018-08-14 18:45:16 -05:00
Scott Lahteine	bd6d032628	Update default driver configuration Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>	2018-08-14 18:42:04 -05:00
Scott Lahteine	1561e61df7	New TMC2208 constructor Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>	2018-08-14 18:41:51 -05:00
Nils Hasenbanck	b37bfeffeb	[2.0.x] Use the new const functions of the persistentStore api (#11544 )	2018-08-14 18:35:36 -05:00
Chris Pepper	5573ef62c6	[2.0.x] PersistentStore update followup (#11549 )	2018-08-14 17:54:12 -05:00
Scott Lahteine	846bd24eb9	MALYAN_LCD is ok without SD	2018-08-14 05:31:47 -05:00
Scott Lahteine	834ea7fcea	Remove 'const' from PersistentStore::capacity	2018-08-14 04:46:10 -05:00
Dave Johnson	c64199941e	Compile only selected PIO environment (#11519 )	2018-08-14 03:28:52 -05:00
Andy Shaw	5be2559eda	Use flash memory to emulate EEPROM (#11500 ) Use a sector of the LPC flash memory to emulate EEPROM storage, removing the need to have an SD card to store system parameters.	2018-08-14 01:19:34 -05:00
Scott Lahteine	6964e1a95a	Clean up trailing whitespace	2018-08-14 00:55:37 -05:00
Scott Lahteine	865ee5985f	Followup persistent store with heading, const	2018-08-13 23:55:33 -05:00
Scott Lahteine	a4b0148365	Easier to find 'static inline'	2018-08-13 23:55:33 -05:00
Scott Lahteine	cc0a60453f	Merge pull request #11526 from hasenbanck/eeprom-cleanup [2.0.x] Change direct eeprom access to HAL::PersistentStore	2018-08-13 19:45:10 -05:00
Roxy-3D	65c5227c29	Change M7219 I to setup Max7219 registers, but not do initialization pattern	2018-08-13 17:46:48 -05:00
Nils Hasenbanck	577aeb4aa9	All EEPROM access uses persistentStore	2018-08-13 17:43:35 -05:00
Scott Lahteine	6a8b906318	Followup for persistent_store_api.h	2018-08-13 17:43:35 -05:00
Chris Pepper	66d2b48b59	Update PersistentStore api (#11538 ) - Clean up the API to use a `static` class instance to adhere to Marlin convention - Add `const` position data access for read/write - Add Storage capacity to the interface	2018-08-13 17:30:25 -05:00
Roxy-3D	60f1376798	Make M7219 I more robust and nice to look at Make M2719 initialize the Max7219 registers and then run the initialization pattern (if one is specified).	2018-08-13 16:59:25 -05:00
Roxy-3D	fd15b1495a	add I parameter to M42 to allow access to sensitive pins	2018-08-13 16:57:09 -05:00
Scott Lahteine	11b411a872	Improve AXIS_DRIVER_TYPE macros	2018-08-13 16:57:09 -05:00
Scott Lahteine	f1347f783d	Optimize thermistor table 71 agData in Table 71 is extremely oversampled (see Issue #11220). I have removed the data points that perform worse than linearly interpolating the remaining points, and fixed up two points that were simply rounded incorrectly. Co-Authored-By: Aaron Griffith <aargri@gmail.com>	2018-08-13 02:54:55 -05:00
Scott Lahteine	0bda22367b	Allow Einsy RAMBo FAN1_PIN override	2018-08-13 02:49:30 -05:00
Scott Lahteine	1b921b246b	Fix pca9632_set_led_color …when used with an I2C screen. Co-Authored-By: soimy <soimy@163.com>	2018-08-13 02:40:22 -05:00
Scott Lahteine	aa9d329560	Reduce max accel in Creality configs	2018-08-11 22:56:51 -05:00
Scott Lahteine	c93538e9f3	UBL/planner patch tweaks	2018-08-11 22:50:45 -05:00
Scott Lahteine	0af22549a6	Allow G33 to compile with no LCD	2018-08-11 22:32:09 -05:00
Thomas Moore	fc55f1da01	Account for UBL correction when setting the planner position (#11486 )	2018-08-10 13:00:50 -05:00
Scott Lahteine	b328fb4dc9	Treat TMC2660 like non-TMC (#11508 )	2018-08-10 00:30:28 -05:00
Scott Lahteine	72b086b90d	Add A5984 to example configurations	2018-08-09 23:04:27 -05:00
Greg Nutt	a1a5367380	Smoothieboard V1.0/1.1 and A5984 support	2018-08-09 23:03:17 -05:00
Scott Lahteine	f891416e70	No raise on G28 after power-loss	2018-08-07 13:51:36 -05:00
Scott Lahteine	e4ecade8d4	Fix AUTO_POWER_CONTROL compile error Counterpart to #11467 Co-Authored-By: lsellens <lsellens@users.noreply.github.com>	2018-08-06 23:20:51 -05:00
Giuliano	eee1b7c50c	[2.0.x] Fix compile error (#11465 ) Address #11463	2018-08-06 23:14:53 -05:00
Giuliano	e85feb2545	[2.0.x] Better timing handling (#11461 )	2018-08-06 23:13:36 -05:00
Scott Lahteine	79835590e3	Easier to disable homing validation (#11458 )	2018-08-06 23:11:37 -05:00
Scott Lahteine	131d216afa	Fix drivers.h dependency, defer macro evaluation (#11450 )	2018-08-03 21:49:04 -05:00
Scott Lahteine	9c62c47579	[2.0.x] Fix Dual X Carriage tool change crash (#11447 )	2018-08-03 20:47:29 -05:00
Scott Lahteine	9bae413901	Add Bigtreetech/BIQU KFB 2.0 board (#11446 )	2018-08-03 18:14:26 -05:00
Marcio Teixeira	f2224755ad	Fix jumping progress bar. (#11439 ) - When LCD_SET_PROGRESS_MANUALLY was disabled and an SD print was not active (i.e. the printer was idle), progress_bar_percent would read uninitialized memory from stack and cause progress bar to jump wildly. - Also updated conditions in `#ifdef` to match `ultralcd.cpp`	2018-08-03 17:17:02 -05:00
Scott Lahteine	aae02827c0	Cosmetic pins changes	2018-08-03 17:03:19 -05:00
Scott Lahteine	64c493ad82	MKS_12864_OLED code cleanup	2018-07-30 23:22:40 -05:00
Scott Lahteine	b826bf4194	Fix initial safe_speed in jerk code (#11417 )	2018-07-30 22:50:08 -05:00
forkoz	2cc950d67e	[2.0.x] MKS SBASE Trinamic examples/support (#11402 )	2018-07-30 22:48:58 -05:00
Roxy-3D	16432376ab	Revert "[2.0.x]Idex and bl touch fixes" (#11407 ) * Revert "[2.0.x] bltouch home refinements (#11397)" This reverts commit `74900f7a70`. * Revert "[2.0.x]Idex and bl touch fixes (#11395)" This reverts commit `6dafb90c01`.	2018-07-28 23:14:46 -05:00
Giuliano	74900f7a70	[2.0.x] bltouch home refinements (#11397 ) Just create a better functions call logic flow	2018-07-28 19:30:14 -05:00
silentninja1	6dafb90c01	[2.0.x]Idex and bl touch fixes (#11395 ) * Fix BLTouch homing Deploy at start, dont call generic stow function at finish or raise goes too high before setting 0 * Update tool_change.cpp * Update motion.cpp * Update motion.cpp * Update motion.cpp * Update motion.cpp * Change brackets to be more in align of Marlin coding standards	2018-07-28 10:33:31 -05:00
Giuliano	5ce5ff8e9b	[2.0.x] fix bltouch homing (#11379 ) Partially revert. Seems to solve the issue, but one report says G29 still fails.	2018-07-27 18:30:08 -05:00
Scott Lahteine	15d68cb496	Pre-override of ST7920 delays before HAL.h	2018-07-26 23:33:18 -05:00
Dave Johnson	8a24ff94d1	AT90USB1286 PIO cleanup and optimization (#11230 ) -normalize `env` and `board` to lowercase naming convention. -make board `name` follow descriptive convention. -implement `-fsingle-precision-constant` compile optimization per https://github.com/MarlinFirmware/Marlin/pull/11178#issuecomment-401673901 -fix typo in 5DPRINT entry.	2018-07-26 05:58:28 -05:00
Lee Olivares	094e6d81a5	Add Einstart-S support (#11219 ) Indeed the HAL does not need to be mucked around with to expose ATmega2560 pins not available as numbers on the MEGA board, I'll need to update the wiki with that tidbit and a reference to the pin-mapping comment in `fastio_1280.h`.	2018-07-26 05:52:22 -05:00
Scott Lahteine	244b9a8257	Better fastio 1280/2560 pin list Co-Authored-By: bleughb <36889022+bleughb@users.noreply.github.com>	2018-07-26 05:23:51 -05:00
Scott Lahteine	955a7f0ae9	Improve driver.h macros (#11371 )	2018-07-26 05:11:22 -05:00
MikeLud	aadcf08913	[2.0.x] add Calibrate Z (M915) to Prepare Menu (#11331 )	2018-07-26 05:09:49 -05:00
Giuliano	4237c3d9f8	[2.0.x] different bltouch init (#11135 )	2018-07-26 05:04:09 -05:00
Andy Shaw	624986d423	Ensure ADC conversion is complete before reading (#11336 ) The current Marlin implementation relies on a timer interrupt to start the ADC conversion and read it. However in some circumstances the interrupt can be delayed resulting in insufficient time being available for the ADC conversion. This results in a bad reading and false temperature fluctuations. These changes make sure that the conversion is complete (by checking the ADC hardware via the HAL) before reading a value. See: https://github.com/MarlinFirmware/Marlin/issues/11323	2018-07-26 03:59:19 -05:00
Scott Lahteine	e2aa635e70	Fix Anet A6 thermistors Co-Authored-By: vitekn <vitekn@users.noreply.github.com>	2018-07-26 02:02:27 -05:00
Bo Herrmannsen	67b205fd45	Add support for board RuRAMPS4D v1.3 (#11363 )	2018-07-25 19:32:27 -05:00
forkoz	d1c6687ecd	Update MKS sBase pins (#11357 )	2018-07-25 19:19:09 -05:00
Scott Lahteine	048dbf6eca	Merge pull request #11275 from thinkyhead/bf2_pwm_adjustments [2.0.x] Tweak some SoftPWM code	2018-07-25 19:02:28 -05:00
Scott Lahteine	e05e95cf97	Clean trailing whitespace	2018-07-25 18:49:47 -05:00
Scott Lahteine	22ebbc091f	Tweak some SoftPWM code	2018-07-25 18:09:31 -05:00
Scott Lahteine	32de09f5c5	Specify some extra CR-10S pins	2018-07-25 18:08:09 -05:00
J.C. Nelson	9c2bfa2ab3	Remove extra parameter to enqueue. (#11364 )	2018-07-25 18:02:02 -05:00
Giuliano	bd3ec66a78	[2.0.x] typo fix (#11365 ) Typo fix	2018-07-25 18:00:47 -05:00
teemuatlut	fbcdf5eaeb	Simplify stepper driver per-axis selection	2018-07-25 02:47:43 -05:00
Scott Lahteine	e5c0b490c8	Add *_DRIVER_TYPE to example configs Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>	2018-07-25 02:47:30 -05:00
Eyal	fbdbe53290	Fix get_period_inverse(0) so it doesn't crash (#11334 )	2018-07-25 01:58:40 -05:00
Scott Lahteine	14e2b11195	Fix spelling in configs	2018-07-24 21:03:38 -05:00
Scott Lahteine	4685c7d59f	Followup to M91x I patch	2018-07-24 18:30:28 -05:00
Roxy-3D	62fa028155	Handle dual gantry machines better	2018-07-24 15:34:53 -05:00
Roxy-3D	09485f63e9	add missing ')'	2018-07-22 10:50:41 -05:00
Roxy-3D	a35abce1ac	Fix missing ')'	2018-07-19 19:20:40 -05:00
Scott Lahteine	76d4cfb064	Tweak some Max7219 code	2018-07-19 18:49:39 -05:00
Scott Lahteine	4195757585	Merge pull request #11309 from thinkyhead/bf2_manual_probe_start_z [2.0.x] Manual Z Start Height	2018-07-19 18:26:26 -05:00
Roxy-3D	03b01e2500	Folger Tech i3-2020 now defaults to 2 Max7219 units	2018-07-19 17:02:46 -05:00
Roxy-3D	db85ca93c4	Change Max7219_idle_task() to use a column instead of row if Y-Axis as 16 LED's	2018-07-19 17:01:31 -05:00
Roxy-3D	9660996cc3	Add Multi Unit Support for Max7219 to bugfix_2.0.0 (#11285 ) * Add Multi Unit Support for Max7219 to bugfix_2.0.0 * Apply multi-MAX7219 to example configs * Tweak some spacing, macros	2018-07-19 13:56:47 -05:00
Scott Lahteine	39c8aed8ba	Add MANUAL_PROBE_START_Z to example configs	2018-07-18 21:49:20 -05:00
Scott Lahteine	2106fa26b1	Add MANUAL_PROBE_START_Z for manual probing	2018-07-18 21:49:20 -05:00
Scott Lahteine	17ed0f815c	Fix tool_change call in UBL G29 Fix #11279, #11252	2018-07-18 20:30:30 -05:00
Scott Lahteine	6d2aff03bd	Merge pull request #11306 from thinkyhead/bf2_power_loss_pin [2.0.x] Add support for power loss detect pin	2018-07-18 20:13:20 -05:00
Scott Lahteine	63a146d424	planner.synchronize at start of tool_change See https://github.com/MarlinFirmware/Marlin/issues/10949#issuecomment-398540498	2018-07-18 20:10:55 -05:00
Scott Lahteine	665ac1e4d0	Add POWER_LOSS_PIN support	2018-07-18 19:55:10 -05:00
Scott Lahteine	2243f72523	Add POWER_LOSS_PIN to example configs	2018-07-18 19:55:10 -05:00
Chris Pepper	47d5fcbbcc	[2.0.x] Change MKS SBASE default serial port to avoid confusion (#11301 )	2018-07-18 18:43:20 -05:00
Scott Lahteine	c83109c0ae	Merge pull request #11238 from xC0000005/MalyanLCDUpdate [2.0.x] Malyan LCD Feedrate + Better Temp Handling	2018-07-17 21:06:52 -05:00
Scott Lahteine	64f007580b	Fix some header comments	2018-07-17 19:50:24 -05:00
Giuliano	aed1d17a2d	Initialize default units (#11295 ) When `INCH_MODE_SUPPORT` is enabled no default unit is set. This fixes it.	2018-07-17 19:37:30 -05:00
Scott Lahteine	8c40f0c6c7	Reduce TQ message code size	2018-07-17 18:18:52 -05:00
xC0000005	b04e0c0cbb	Malyan LCD feedrate, better temp handling.	2018-07-17 18:18:52 -05:00
Scott Lahteine	065e9c3d66	Add card.longest_filename method	2018-07-17 18:18:52 -05:00
Roxy-3D	71df1f7f57	Don't display M421 information for UBL at startup It takes too long to display the mesh data for large mesh's at startup. We should consider ways to speed this up. Perhaps it makes sense to display an entire row of the mesh instead of just one mesh point?	2018-07-17 17:19:52 -05:00
Scott Lahteine	be7d1dfb3c	Merge pull request #11267 from teemuatlut/bf2_lpc_spi [2.0.x] LPC1768: Expand hardware SPI class	2018-07-16 21:52:18 -05:00
Giuliano	8f686aa449	[2.0.x] Fix change filament crash (#11269 ) Prevent crash, on filament change, when printer is not homed	2018-07-16 21:49:29 -05:00
teemuatlut	f38c81cdde	LPC176x: Expand HW SPI class	2018-07-14 19:06:27 +03:00
teemuatlut	3b5dec4b13	Add new LPC include folder	2018-07-14 18:58:56 +03:00
Scott Lahteine	e486326910	Vellemann K8400 Y bed size is 180 Co-Authored-By: kaimimue <kaimimue@users.noreply.github.com>	2018-07-13 23:19:46 -05:00
Giuliano	e5ea9d200f	[2.0.x] fix kill printer (#11260 ) This will fix kill message on dual printer with 0 alignment offset	2018-07-13 23:12:43 -05:00
Jamie Bainbridge	8c57cadbe7	Include stdlib in fontutils (#11251 ) When `REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER` is defined and Re-ARM build is attempted, `u8g_fontutf8.cpp` includes `fontutils.h` which uses `abs()`. However, `abs()` is defined in `stdlib.h` which is not included in `fontutils.h`, so compile fails with an error. Include `stdlib.h` in `fontutils.h` so that `abs()` is defined before `u8g_fontutf8.cpp` needs to use it, resolving the compile error. Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>	2018-07-13 00:02:38 -05:00
Scott Lahteine	bf7d0ba859	Assert that XY probe offsets are integers	2018-07-12 22:48:07 -05:00
Scott Lahteine	12854f1909	Add Z_CLEARANCE_MULTI_PROBE to example configs Co-Authored-By: nightgryphon <ngryph@gmail.com>	2018-07-12 22:46:34 -05:00
Scott Lahteine	25e2ca8896	Add Z_CLEARANCE_MULTI_PROBE Co-Authored-By: nightgryphon <ngryph@gmail.com>	2018-07-12 22:46:34 -05:00
Scott Lahteine	fd8a76493b	Unify M91x parameter I meaning, simplify reports (#11249 )	2018-07-12 22:31:51 -05:00
Scott Lahteine	566d05006d	report_state > event_handler Make the endstop report method track endstop changes on its own.	2018-07-11 21:08:07 -05:00
Scott Lahteine	6b521b6df2	Loosen thermistor table size limit Co-Authored-By: Aaron Griffith <aargri@gmail.com>	2018-07-11 21:08:07 -05:00
Scott Lahteine	20761b88e0	Merge pull request #11212 from AlexanderAmelkin/2.0-HD44780-remove-unused-include [2.0.x][HD44780] Remove unused include	2018-07-08 17:19:59 -05:00
Roxy-3D	603e136e87	Resolve issue where user can't edit UBL's mesh	2018-07-08 14:41:38 -05:00
Alexander Amelkin	ed720194d2	[2.0.x][HD44780] Remove unused include The <binary.h> header is not available in STM32 toolchain and is not used anywhere in ultralcd_common_HD44780.h. If it is used anywhere in HD44780 support for other platforms, it must be included in the corresponding .cpp file directly and put under appropriate conditional compilation directives for the platform requiring it. As I was unable to find such code, I consider the file unused and hence remove the inclusion.	2018-07-06 23:45:47 -05:00
Scott Lahteine	d05e832f29	Add STM32F1 support for SD-based EEPROM	2018-07-06 23:45:47 -05:00
Scott Lahteine	63f4c9bdb9	Followup to float maths patch	2018-07-06 21:34:09 -05:00
Scott Lahteine	2992112da0	Optimize delta kinematics Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-07-04 22:28:56 -05:00
etagle	1367df2875	Replace double with float, optimize calculation	2018-07-04 22:28:56 -05:00
Scott Lahteine	d960d448fa	Optimize calculations with LROUND	2018-07-04 22:22:28 -05:00
Scott Lahteine	68e6650df7	Remove Quake Fast Inverse SQRT (it isn't faster)	2018-07-04 22:22:10 -05:00
etagle	e7e896e7d7	More tweaks to fastio_Due.h	2018-07-04 17:57:47 -05:00
Chris Pepper	55f4744e54	[LPC176x] Endstop Interrupts Feature (#11202 ) Enable the endstop interrupts feature for LPC176x boards. Although Smoothieboard chose to use non-interrupt capable pins for their endstops, and this has been copied by clones, so they can't use it.	2018-07-04 17:51:45 -05:00
Chris Pepper	5abf5bc8a7	[LPC176x] Fix Interrupt forward declarations (#11200 )	2018-07-04 17:43:14 -05:00
Chris Pepper	cbea385ed7	[2.0.x] Fix LCD_LANGUAGE options list formatting in config (#11198 ) * Fix LCD_LANGUAGE options list formatting in config * Remove 'cn' language option from list	2018-07-04 17:42:14 -05:00
Scott Lahteine	6837252fba	Merge pull request #11196 from thinkyhead/bf2_fix_m914_sgt [2.0.x] No M914 or SGT with non-sensorless axes	2018-07-04 02:34:48 -05:00
Scott Lahteine	5379c115c8	Fix Trigorilla include typo	2018-07-03 20:23:26 -05:00
Scott Lahteine	9c058091e9	No M914 or SGT set for non-sensorless axes	2018-07-03 20:09:13 -05:00
Scott Lahteine	c7ec6c68e7	Patch SCARA config to match 1.1.x	2018-07-03 20:09:13 -05:00
Scott Lahteine	480a3d3d0c	Apply sensorless homing requirements only for specified axes	2018-07-03 19:16:09 -05:00
Scott Lahteine	47ee149dfd	Merge pull request #11195 from thinkyhead/bf2_tronxy_x3a [2.0.x] Tronxy X3A configurations and thermistor	2018-07-03 19:06:01 -05:00
Scott Lahteine	8c0ec81a19	Followup to #11187	2018-07-03 18:19:26 -05:00
Scott Lahteine	48c1f32b3e	Add configurations for Tronxy X3A	2018-07-03 17:56:48 -05:00
Scott Lahteine	568cfe7caa	Add thermistor 501 (100K Zonestar)	2018-07-03 17:52:06 -05:00
Scott Lahteine	1a0f4dedad	Fix and improve POWER_LOSS_RECOVERY (#11187 )	2018-07-02 23:21:28 -05:00
Scott Lahteine	e0ab8acf19	Add "Marlin Dev Mode" option	2018-07-02 22:55:21 -05:00
Scott Lahteine	4b2af6ab48	Minor patches to POWER_LOSS_RECOVERY	2018-07-02 17:26:53 -05:00
Scott Lahteine	1ea222e6fc	Turn off DISABLE_INACTIVE_EXTRUDER with SWITCHING_NOZZLE Fix #11183	2018-07-02 17:26:53 -05:00
Roman Moravčík	8299ac121d	[2.0.x] Slovak translation update (#11175 )	2018-07-01 23:15:51 -05:00
teemuatlut	3de0c85d41	Fix RRW graphical LCD constructor macro (#11171 )	2018-07-01 23:14:23 -05:00
TheLongAndOnly	cedc158106	[2.0.x] Board specific init macro (#11170 )	2018-07-01 23:11:42 -05:00
Chris Pepper	5616581eb1	[LPC176x] Update fastio _GET_INPUT, _GET_OUTPUT macros (#11168 )	2018-07-01 23:02:38 -05:00
Scott Lahteine	8a8eae8d97	Implement more fastio_Due macros (#11165 )	2018-07-01 01:24:06 -05:00
Scott Lahteine	c51e27d11d	Do a hard kill for failed homing moves (#11161 )	2018-06-30 21:54:07 -05:00
Scott Lahteine	90ba77ea0f	Lose the old HOMEAXIS macro	2018-06-30 18:13:13 -05:00
Scott Lahteine	2421f3a47d	Detect endstop hits in any direction	2018-06-30 17:27:37 -05:00
Scott Lahteine	f9a090b2cf	Fix Trigorilla 1.4 pins See #11097	2018-06-30 13:45:55 -05:00
Scott Lahteine	8eaac0dab3	Add delta feedrate scaling (#11153 )	2018-06-30 13:44:27 -05:00
Scott Lahteine	444725ae9a	Non-conflicting CS pins for MKS Gen L	2018-06-30 02:36:01 -05:00
J.C. Nelson	8c9f90153e	Enable Malyan LCD Support for M200 printers. (#11051 )	2018-06-30 00:35:54 -05:00
Scott Lahteine	fc10101b06	Tweaks to fastio_Due.h	2018-06-30 00:15:50 -05:00
Scott Lahteine	05518d6add	Add newline to end of file	2018-06-29 23:54:16 -05:00
Scott Lahteine	d4fde91222	Fix serial.h including itself	2018-06-29 23:53:25 -05:00
Scott Lahteine	a431013eb7	Fix G33 compile warning	2018-06-29 23:17:51 -05:00
Scott Lahteine	bd7f5848f1	Remove JUNCTION_DEVIATION_INCLUDE_E option (#11147 )	2018-06-29 22:42:05 -05:00
Scott Lahteine	fbf1c9b496	Fix and tweak POWER_LOSS_RECOVERY (#11151 )	2018-06-29 22:41:02 -05:00
Colin Gilgenbach	0fff79c24b	Fixes G29_with_retry behavior (#11045 ) * Fix G29 (ABL) retry behavior	2018-06-29 20:48:11 -05:00
Scott Lahteine	3349eb0020	Fix SKEW_CORRECTION compile error	2018-06-29 19:38:18 -05:00
Scott Lahteine	a264030526	Fix "G29" G29_MAX_RETRIES handling	2018-06-29 18:46:31 -05:00
Scott Lahteine	42f9921482	Ignore Z min endstop with separate Z-probe To allow for the case where a Z endstop (e.g., hall effect) is higher than the probe trigger point, don't check the Z min endstop during probe moves. See #11134	2018-06-28 05:06:11 -05:00
Scott Lahteine	1b8973eb1c	Fix up microsteps conditionals	2018-06-27 23:41:32 -05:00
Scott Lahteine	aa4cd2e861	Eliminate stepper.* signed/unsigned warnings	2018-06-27 23:10:51 -05:00
Eduardo José Tagle	edb21f349a	Fix stepper/planner block handling, race conditions (#11098 ) - Allow planner to alter the deceleration phase of the currently executing block. - Remove BUSY flag, as it is NON ATOMIC to set bits in the Stepper ISR and Planner at the same time.	2018-06-27 18:11:16 -05:00
Scott Lahteine	4d3a9930c5	Match ASM comment spacing to 1.1.x	2018-06-27 17:26:48 -05:00
Scott Lahteine	053438a3aa	Poll all endstops, even when stationary (#11123 )	2018-06-27 04:18:57 -04:00
Andy Shaw	3b3029c4bf	Make max_e_jerk an array to reduce CPU usage (#11118 )	2018-06-26 22:38:31 -04:00
Scott Lahteine	d13f76b7da	Patch some loop macros	2018-06-26 20:30:52 -05:00
Scott Lahteine	229b26b02c	Clear LED matrix without startup test	2018-06-26 18:54:01 -05:00
Alexander Amelkin	ffdbc1f42c	STM32F1: Fix SD card persistent store API (#11090 )	2018-06-26 14:41:23 -04:00
Giuliano	8d8f257384	[2.0.x] Fix advanced pause init values (#11095 ) Fixed for cycle used to initialize default values	2018-06-26 14:37:52 -04:00
etagle	5b49fccf80	Add stepper driver DIR delay configuration option ...and recommended pulse width configuration for A4988	2018-06-26 13:28:04 -05:00
Scott Lahteine	d86f25ab63	Fix Serial ISR priority for LPC1768 Co-Authored-By: p3p <p3p@p3psoft.co.uk>	2018-06-25 12:15:41 -04:00
etagle	fb4e0b105b	Fix endstops compilation error	2018-06-25 12:10:17 -04:00
Eduardo José Tagle	48a15d1c7e	[2.0.x] Fix stepper/planner race condition and Stepper pulse timer (#11081 ) * Planner: Removal of some race conditions between Stepper ISR and Planner, some of them pointed out by @AnHardt, some of my own findings * Fixing timing on stepper pulses adding a compensation for the non-null time required to set ports.	2018-06-22 09:15:37 -05:00
Michael Triffon	7e802145cc	[2.0.x] Add CR-10 stock display support for Re-Arm (EXP3) (#11068 )	2018-06-21 23:08:17 -05:00
Scott Lahteine	50b6204079	Fix LIN_ADVANCE max_e_jerk_factor According to https://github.com/MarlinFirmware/Marlin/issues/9917#issuecomment-399204568	2018-06-21 22:02:34 -04:00
Scott Lahteine	99591dc20c	Filter endstops state at all times (#11066 )	2018-06-21 20:14:16 -05:00
Scott Lahteine	a5c11bf578	Merge pull request #11075 from thinkyhead/bf2_value_editing [2.0.x] Fix value editing (with callback)	2018-06-21 20:13:58 -05:00
Roxy-3D	1d7dd0edfd	Add the move_z_after_probing() functionality to UBL's G29 J	2018-06-21 13:26:20 -05:00
Scott Lahteine	383129728a	Edit Z fade as whole numbers	2018-06-21 11:52:29 -04:00
Scott Lahteine	1239e8eda2	Fix value editing with callback	2018-06-21 11:52:03 -04:00
Scott Lahteine	7a84b03796	Use MIN/MAX in post-conditionals	2018-06-20 03:15:19 -05:00
Scott Lahteine	a2a30ff0ac	Use Tool 0 for Dual X Axis G29 See https://github.com/MarlinFirmware/Marlin/issues/5597#issuecomment-397683325	2018-06-20 01:32:23 -05:00
Scott Lahteine	e366d55bc2	Don't reset stepper timeout for all g-codes	2018-06-19 21:48:28 -05:00
Scott Lahteine	7406f04029	Use MAX (not max) in stepper.h	2018-06-19 20:51:07 -05:00
Roxy-3D	7c54c4ed27	Tiny improvement to M7219 The registers within the Max7219 can get corrupted a number of ways. This allows the Max7219 to be reset and fully initialized. And... it also allows the user to see the initialization pattern.	2018-06-19 14:46:30 -05:00
Giuliano	a65d15c905	[2.0.x] Fix Italian msg len (#11058 ) Fix message to long for 12864 display	2018-06-18 22:04:55 -05:00
Scott Lahteine	d4795e5b8e	[2.0.x] Tweaks and additions for MAX7219 (#11034 )	2018-06-18 22:04:03 -05:00
Scott Lahteine	e23677a7b2	Update some G-code comments	2018-06-18 16:13:01 -05:00
Chris Pepper	0312c42f9d	[2.0.x] LPC176x Serial cleanup (#11032 )	2018-06-16 20:59:22 -05:00
Scott Lahteine	c1269c2ec1	Tweak AVR critical section defines	2018-06-16 17:42:32 -05:00
Scott Lahteine	da94e0bd27	Unsigned eeprom mesh addresses	2018-06-15 15:51:57 -05:00
Chris Pepper	f88adcbfd5	[2.0.x][LPC176x] Fix binary linking broken by pio update (#11026 )	2018-06-15 15:32:51 -05:00
Simon Jouet	e2aeda61ed	HAL for Espressif ESP32 Wifi	2018-06-13 19:33:35 -05:00
Scott Lahteine	091f742432	Add WIFISUPPORT to example configs	2018-06-13 19:27:33 -05:00
Scott Lahteine	19d4c7c1cd	Tweak HAL header comments	2018-06-13 19:08:42 -05:00
Giuliano	cce0523a95	[2.0.x] reset bltouch on home (#11018 ) Added reset bltouch instead. This ensure properly stow even when in error.	2018-06-13 14:09:13 -05:00
Scott Lahteine	4c8d6df13c	Extra insurance against endstop false positives (#11013 )	2018-06-13 01:22:02 -05:00
Scott Lahteine	81edbfa665	Merge pull request #11004 from ejtagle/always_honor_maximum_step_rate [2.0.x] Fix stepper pulse minimum period and timing calculations	2018-06-12 22:17:22 -05:00
Scott Lahteine	f3fed52348	Fix coolstep_min_speed / sensorless homing Fix #8890	2018-06-12 22:12:46 -05:00
etagle	a215725df6	Fix stepper pulse timing Always honor minimum period on stepper pulse generation, and fix timing calculations Signed-off-by: etagle <ejtagle@hotmail.com>	2018-06-12 21:34:24 -05:00
Scott Lahteine	0d79128c8d	Localize stepper-specific defines	2018-06-12 21:16:54 -05:00
Scott Lahteine	a9861a780e	Tweak HAL heading	2018-06-12 19:40:17 -05:00
Scott Lahteine	cf53e502a2	No need to set input after attachInterrupt	2018-06-12 18:43:11 -05:00
Karl Andersson	e0276d2f32	Official STMicroelectronics Arduino Core STM32F4 HAL compatibility (#11006 )	2018-06-12 18:38:00 -05:00
Scott Lahteine	4dbec774b5	HAL__TIMER_RATE => _TIMER_RATE	2018-06-12 16:39:12 -05:00
Scott Lahteine	12689f2470	Merge pull request #11001 from thinkyhead/bf2_junction_deviation_fix [2.0.x] Updates for junction_deviation_mm	2018-06-11 22:31:17 -05:00
Scott Lahteine	9b945c13a1	Fix STM32F1 ISR_ENABLED	2018-06-11 22:09:45 -05:00
Scott Lahteine	9d04f47d98	Improvements for junction_deviation_mm - Drop `max_jerk` with `JUNCTION_DEVIATION` - Add `max_e_jerk_factor` for use by `LIN_ADVANCE` - Recalculate `max_e_jerk_factor` when `junction_deviation_mm` changes - Fix LCD editing of `junction_deviation_mm`	2018-06-11 22:05:16 -05:00
Scott Lahteine	f2c3b0d476	Use bit flags for homed/known	2018-06-11 22:05:16 -05:00
Scott Lahteine	4832be52d7	Followup to G29 O	2018-06-11 21:57:26 -05:00
Robert Mendon	86170e6a66	[2.0.x] Add O (optional) flag to G28/G29 (#10913 )	2018-06-11 21:51:48 -05:00
Alexey Shvetsov	2ddba201c0	STM32F1 HAL Fixes (#10999 ) - Enable / disable interrupts with `__iSeiRetVal` / `__iCliRetVal` - Add STM32F1 to Travis CI tests	2018-06-11 20:00:56 -05:00
Scott Lahteine	43bdd0bfe4	Fix indent in stepper.h	2018-06-11 19:17:46 -05:00
Scott Lahteine	2ba198a624	Tweak M122 report spacing	2018-06-10 20:33:18 -05:00
Eduardo José Tagle	5590c8ffd0	Fix MarlinSerial (AVR) (#10991 ) An undocumented hw bug makes the UART lose chars when RX ISR is disabled, even for a very small amount of time. This happens when RX_BUFFER > 256, and the result is corrupted received commands. Solved by implementing pseudo-atomic operations on 16bit indices.	2018-06-10 20:32:20 -05:00
Scott Lahteine	3fd1f32b73	Fix ADC key and chamber temp	2018-06-10 20:11:40 -05:00
Scott Lahteine	117fd007a9	Followup to pin error change	2018-06-10 19:28:45 -05:00
Scott Lahteine	ae07a3e4aa	Multiplier edit large ranges	2018-06-10 18:22:12 -05:00
Scott Lahteine	20a5db03bb	Junction Deviation limit (0.01 to 0.3)	2018-06-10 18:22:08 -05:00
Scott Lahteine	a2f521d34b	Add Junction Deviation mm runtime setting (#10990 )	2018-06-10 18:02:54 -05:00
Scott Lahteine	590ce1c33e	Fix serial debug ouput	2018-06-10 17:54:22 -05:00
Scott Lahteine	968a5d2e63	Protected pin err for M226	2018-06-10 17:45:47 -05:00
Scott Lahteine	4b90cd8ead	Merge pull request #10922 from ejtagle/bugfix-2.0.x [2.0.x] Adaptive multiaxis step smoothing, and tons of fixes	2018-06-10 16:28:52 -05:00
Giuliano	f1cdfe3dfd	[2.0.x] stow bltouch before start homing (#10987 )	2018-06-10 16:27:14 -05:00
etagle	6f14bcaa3e	Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping The timing value should be properly set for ALL boards. The compiler will check and set maximum step rate calculations based on those values.	2018-06-10 16:02:47 -05:00
etagle	39a7e7720d	Adaptive multiaxis step smoothing - Stepper bugs fixed - Support MIXING_EXTRUDER with Linear Advance - Miscellaneous cleanup	2018-06-10 16:02:47 -05:00
etagle	99af086cea	Add hidden Serial overflow debug options	2018-06-10 04:25:42 -05:00
etagle	d90e8fcad9	Fix XON/XOFF implementation Pointed out by @GMagician	2018-06-10 04:25:42 -05:00
Scott Lahteine	bbf80440bf	Add sanity-check for MOTHERBOARD	2018-06-10 04:03:33 -05:00
Giuliano	b64cc9329e	[2.0.x] Fix dual enstop home (#10980 )	2018-06-10 02:08:47 -05:00
Scott Lahteine	8a376e6beb	Update MINIMUM_STEPPER_PULSE description	2018-06-10 00:13:03 -05:00
Scott Lahteine	3701869e6c	Add HAL_timer_start for AVR, use stepper timer to time pulses	2018-06-09 22:30:13 -05:00
Giuliano	e970e429b6	[2.0.x] Fix null check in lsDive (#10978 )	2018-06-09 22:03:49 -05:00
etagle	d82704354f	Increase the planner first block HOLD delay to 100mS	2018-06-09 21:12:37 -05:00
Scott Lahteine	779d4a17a0	Highlight 64128N and common ST7565 difference Followup to #10920, addressing #10962	2018-06-09 19:18:41 -05:00
Scott Lahteine	b9418439b9	Prevent MB false-positive on bad board name	2018-06-08 19:58:43 -05:00
Scott Lahteine	88314b8910	CREALITY_ENDER is long gone As noted in #10965	2018-06-08 19:53:21 -05:00
Scott Lahteine	334341c632	Hephestos config updates (#10960 )	2018-06-07 21:23:55 -05:00
Scott Lahteine	f74278b8b1	Add -4 thermocouple to list in configs	2018-06-07 21:04:06 -05:00
Scott Lahteine	7ba5afff01	Allow FAN_PIN override, pins cleanup (#10956 )	2018-06-07 16:46:13 -05:00
Scott Lahteine	55aedf036b	Fix M503 ABL mesh report. (Zero-based IJ indices)	2018-06-07 16:36:50 -05:00
Scott Lahteine	e7623b5788	Restore Z_PROBE_PIN to pinsDebug_list.h	2018-06-07 15:39:24 -05:00
Scott Lahteine	a426986df8	Ensure pins set to INPUT after attachInterrupt (#10928 )	2018-06-06 20:59:08 -05:00
Scott Lahteine	d8b983f624	More concise M503 output for M906, M913, M914 (#10947 )	2018-06-06 20:58:28 -05:00
Giuliano	eb1026d438	[2.0.x] Fix compile warning (#10931 )	2018-06-05 22:44:34 -05:00
Scott Lahteine	c2bdbdffaa	Prevent a buffer overflow in diveToFile Co-Authored-By: akunt	2018-06-05 22:13:17 -05:00
Giuliano	c9d1a620d4	[2.0.x] fix indentations (#10934 )	2018-06-05 02:03:26 -05:00
Roxy-3D	d550da084f	Fix Max7219 control pins for use with 32-bit platforms	2018-06-04 13:37:23 -05:00
Scott Lahteine	c16e41e9e6	STM32F4 pins cleanup	2018-06-03 19:08:04 -05:00
Scott Lahteine	c685c7b7dd	STM32F4: All pins can do PWM	2018-06-03 04:30:15 -05:00
Scott Lahteine	2fd9ba56da	LED menu item bool (like Case Lights)	2018-06-03 00:34:29 -05:00
Scott Lahteine	ad8d3150aa	Cleanup for dual endstops homing	2018-06-03 00:34:29 -05:00
Scott Lahteine	61181b7f24	Add macros for ST7565 commands	2018-06-02 20:48:44 -05:00
Eduardo José Tagle	d3c02410a8	[2.0.x] Small assorted collection of fixes and improvements (#10911 ) * Misc fixes and improvements - Get rid of most critical sections on the Serial port drivers for AVR and DUE. Proper usage of FIFOs should allow interrupts to stay enabled without harm to queuing and dequeuing. Also, with 8-bit indices (for AVR) and up to 32-bit indices (for ARM), there is no need to protect reads and writes to those indices. - Simplify the XON/XOFF logic quite a bit. Much cleaner now (both for AVR and ARM) - Prevent a race condition (edge case) that could happen when estimating the proper value for the stepper timer (by reading it) and writing the calculated value for the time to the next ISR by disabling interrupts in those critical and small sections of the code - The problem could lead to lost steps. - Fix dual endstops not properly homing bug (maybe). * Set position immediately when possible	2018-06-01 19:02:22 -05:00
Scott Lahteine	2deff0d9b9	Fix/Improve junction deviation - Respect axis max acceleration limits instead of forcing a fixed acceleration value. - The `junction_unit_vec` ensures proper handling of entry and exit speeds even when the axes involved have different limits.	2018-05-31 20:09:53 -05:00
Scott Lahteine	6885ca606c	Drop JUNCTION_ACCELERATION from example configs	2018-05-31 20:07:28 -05:00
Chris Pepper	d87257f63c	[2.0.x][LPC176x] Fix PIO build flags (#10909 ) Don't build and link with different flags, the binary may not work.	2018-05-31 19:08:31 -05:00
Axel	ae322e0c54	[2.0.x] Add GTM32 Pro VB support (#10898 )	2018-05-31 00:11:38 -05:00
Scott Lahteine	d259070980	Clean up trailing spaces from vim, etc.	2018-05-31 00:09:41 -05:00
Scott Lahteine	21d812d502	Fix the Z un-hop on G11 Co-Authored-By: zarthcode <anthony.clay@zarthcode.com>	2018-05-29 23:41:36 -05:00
Scott Lahteine	d3c473002a	For SCARA probe Y offset is proximal/distal	2018-05-29 21:55:53 -05:00
Scott Lahteine	b90f54b0fc	Improve probe logging	2018-05-29 21:54:13 -05:00
Scott Lahteine	3f2a062a57	Fix M914 value range (-64...+63) Fix #10896	2018-05-29 12:02:15 -05:00
Scott Lahteine	b6cd8d9cc6	Set deltas to park on the left	2018-05-29 11:44:31 -05:00
Scott Lahteine	9713538427	HOTENDS for Switching Nozzle with Switching Extruder	2018-05-29 11:05:52 -05:00
Scott Lahteine	c68b7b3913	Update Fan 2 and E0 Auto Fan pins for Trigorilla	2018-05-28 21:11:12 -05:00
Scott Lahteine	cbcb284f4a	Allow libServo::attach to work on Teensy 3.5/3.6	2018-05-28 20:56:24 -05:00
Chris Pepper	f89f7c4a82	[2.0.x][LPC176x][Build] Force single precision constants, disable freestanding (#10892 )	2018-05-28 19:38:22 -05:00
Scott Lahteine	4299e5dc8b	Modify E-stepping macros for use in LINEAR_ADVANCE (#10885 )	2018-05-28 19:34:08 -05:00
Scott Lahteine	8f14ef855d	More concise commentary in planner.cpp	2018-05-28 19:25:18 -05:00
Scott Lahteine	6919e87656	Minor cleanup of multi-stepping logic	2018-05-28 17:44:33 -05:00
android444	16da5c62d0	Teensy 3.x fastio pullup (#10890 )	2018-05-28 16:25:12 -05:00
Scott Lahteine	853a9056ac	Long thermistor tables need special consideration	2018-05-28 06:28:34 -05:00
Scott Lahteine	a4f9c3373f	Tweak thermistor spacing	2018-05-28 03:44:32 -05:00
Scott Lahteine	9b9b62b218	delay(SERVO_DELAY) => safe_delay(servo_delay[servo_index])	2018-05-28 03:44:32 -05:00
Scott Lahteine	1ce97f1f6d	Faster (bisect) search in thermistor tables (#10883 )	2018-05-27 23:27:51 -05:00
Scott Lahteine	0ca9db7051	Correct HOTENDS for SWITCHING_EXTRUDER	2018-05-27 23:22:48 -05:00
Scott Lahteine	945139e328	Clean up some formatting	2018-05-27 17:58:40 -05:00
android444	9c235ef821	[HAL]Add support for ST7920 - Teensy 3.x (#10872 )	2018-05-27 03:36:57 -05:00
Eduardo José Tagle	7b9f0302d4	Fix Bresenham rounding errors, add link to article (#10871 )	2018-05-27 01:49:59 -05:00
Scott Lahteine	2566342979	Adjust some commentary	2018-05-27 00:10:25 -05:00
Scott Lahteine	1b200f3312	Sanity check SWITCHING_EXTRUDER with SINGLENOZZLE	2018-05-26 23:26:23 -05:00
Scott Lahteine	6775a16c97	Fix switching extruder stepping with LA	2018-05-26 19:07:01 -05:00
Scott Lahteine	2e139fe50f	Tweak configuration spacing	2018-05-26 18:33:51 -05:00
Scott Lahteine	931ab4ec40	Rename Junction Deviation options	2018-05-26 18:33:51 -05:00
Scott Lahteine	aaaf09bda2	BEZIER_JERK_CONTROL => S_CURVE_ACCELERATION	2018-05-26 18:33:51 -05:00
Scott Lahteine	cf7d5a642a	Fix manual moves for switching tools (#10868 )	2018-05-26 18:30:53 -05:00
Eduardo José Tagle	1da2c4f1c1	Text LCD display routine fix. Coauthored with @MagoKimbra (#10864 )	2018-05-26 18:13:33 -05:00
Bob-the-Kuhn	1c0ad8bbae	wrong type of exit method	2018-05-26 08:17:03 -05:00
Scott Lahteine	01d37e00af	Fix up stepper ISR with linear advance timing (#10853 ) Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-05-26 01:00:13 -05:00
Eduardo José Tagle	6f330f397e	[2.0.x] Buffer overflow and scroll fix, UTF8 cleanup (#10844 )	2018-05-25 23:32:37 -05:00
Bob Kuhn	235facd545	install AVRDUDE 5.10, faster disk find for LPC1768 (#10849 )	2018-05-25 20:26:48 -05:00
Scott Lahteine	645df23eb0	Fix warning with FASTER_GCODE_PARSER disabled	2018-05-25 06:45:42 -05:00
Scott Lahteine	d74e333c0f	Make sure FAN_ANIM_FRAMES is defined	2018-05-25 05:28:50 -05:00
Bob Kuhn	e2db509d58	[2.0.x] Update/Fix LPC1768 extra script upload_extra_script.py (#10843 ) * Use a different method to find the volume info in Windows	2018-05-25 04:31:18 -05:00
Scott Lahteine	7261f48872	Fix reset of endstops and move state	2018-05-24 19:33:36 -05:00
Scott Lahteine	50fa8e01c1	Minor optimization of axis_did_move bits	2018-05-24 19:08:07 -05:00
Scott Lahteine	a94506ada0	Fix K8400 Y min pos, M118 comment	2018-05-24 08:21:16 -05:00
Scott Lahteine	336a022529	Support Malyan LCD without SD	2018-05-24 05:01:18 -05:00
Scott Lahteine	f28e366b77	Followup for core endstops	2018-05-24 03:02:57 -05:00
Scott Lahteine	8b44745bc7	Clean up and consolidate SD-related code (#10831 )	2018-05-24 01:18:56 -05:00
Scott Lahteine	9644d56b42	Patches for core motion tests	2018-05-24 00:49:01 -05:00
Scott Lahteine	5f8591528e	Remove #pragmas that don't help c files	2018-05-23 23:47:16 -05:00
Scott Lahteine	230ae6a143	Default G30 to engage / disengage	2018-05-23 16:57:23 -05:00
Scott Lahteine	3e3789da85	Regression: Endstops Core compatibility (#10823 ) Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-05-23 03:45:25 -05:00
Scott Lahteine	c89649b46e	Suppress U8glib build warnings	2018-05-23 02:47:36 -05:00
Axel	bbd09a99f1	32 bit boards classification cleanup (#10818 ) - Ordering and match classification between `boards.h` and `pins.h` - Check `pins.h` environments	2018-05-22 21:20:24 -05:00
Scott Lahteine	ee333f6be2	Followup to endstops tweaks	2018-05-22 20:41:03 -05:00
Axel	d98bc71af7	Boards classification arrangement (#10814 ) STM32 ARM Cortex-M3 boards were listed as M4	2018-05-22 02:56:51 -05:00
Scott Lahteine	4b610b333e	Tweak G38 formatting	2018-05-22 01:56:03 -05:00
Scott Lahteine	d2647c1f19	Fix G1 behaviour after tool unpark Fix #10777 for 2.0.x Co-Authored-By: Ante Vukorepa <o.orcinus@gmail.com>	2018-05-22 00:53:00 -05:00
Scott Lahteine	3bb950c69a	Fix DEBUG_LEVELING_FEATURE for MBL As noted in #10777	2018-05-22 00:49:15 -05:00
Scott Lahteine	1af98519cd	Group and adjust LCD buttons code	2018-05-22 00:37:45 -05:00
Scott Lahteine	0c3773d724	Cleanup in stepper_indirection.h	2018-05-22 00:36:03 -05:00
Scott Lahteine	4118199ddd	Tweaks to core headers	2018-05-21 20:32:18 -05:00
Scott Lahteine	4b2f6e3b2b	[2.0.x] Add endstop noise filter (#10796 )	2018-05-21 15:51:38 -05:00
Scott Lahteine	65a004564c	Stepper::set_position needed for some applications	2018-05-21 15:21:33 -05:00
Scott Lahteine	435ecb6b67	Followup to stepper/planner refactor	2018-05-20 23:13:38 -05:00
Bob Kuhn	6dfbb39f83	[LPC1768] Add error-handling to upload script, update autobuild.py (#10802 )	2018-05-20 21:22:04 -05:00
Scott Lahteine	68d7fcec83	Simplify and fix Z fade height edit Fix #10761	2018-05-20 12:29:23 -05:00
Bob Kuhn	d557c84a71	[2.0.x] Error for FAST_PWM_FAN with 32 bit CPU (#10798 )	2018-05-20 11:37:55 -05:00
etagle	569df3fc0c	Fix interrupt-based endstop detection - Also implemented real endstop reading on interrupt.	2018-05-20 07:10:24 -05:00
etagle	a4af975873	Fix planner block optimization - Fixed the planner incorrectly avoiding optimization of the block following the active one. - Added extra conditions to terminate planner early and avoid redundant computations.	2018-05-20 07:10:24 -05:00
etagle	e0ca627033	Planner block HOLD flag Allows the Stepper ISR to wait until a given block is free for use. Allows Planner to plan the first move, which is split into two.	2018-05-20 06:23:58 -05:00
etagle	a11eb50a3e	Refactor and optimize Stepper/Planner Better encapsulation and considerably reduce stepper jitter	2018-05-20 06:23:58 -05:00
etagle	0566badcef	Add memory barrier, optimal interrupt on-off Disabling an ISR on ARM has 3 instructions of latency. A Memory barrier is REQUIRED to ensure proper and predictable disabling. Memory barriers are expensive, so avoid disabling if already disabled (See https://mcuoneclipse.com/2015/10/16/nvic-disabling-interrupts-on-arm-cortex-m-and-the-need-for-a-memory-barrier-instruction/)	2018-05-20 02:39:34 -05:00
Scott Lahteine	c2fb2f54a1	Use assembly for AVR ISR vectors Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-05-20 01:58:51 -05:00
Scott Lahteine	206014a957	Fix LPC176x timer functions Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-05-20 01:58:51 -05:00
Scott Lahteine	59f7861bcb	Move backtrace to the HAL folder (#10790 )	2018-05-20 01:33:21 -05:00
Scott Lahteine	228139eae6	Tweak some LCD comments	2018-05-19 21:00:08 -05:00
Scott Lahteine	7dc03ce721	Simplified fix for babystep pulse width Alternative to the apparently superfluous double delay	2018-05-19 21:00:08 -05:00
Scott Lahteine	65270d6a96	Fix LIN_ADVANCE + SWITCHING_EXTRUDER Followup to #10656	2018-05-19 18:32:00 -05:00
Bob Kuhn	62e2987488	add AT90USB support & add items to popup menu (#10779 )	2018-05-19 17:39:26 -05:00
Bob Kuhn	9ad42d6617	add delay between pulse edges (#10778 )	2018-05-19 17:12:16 -05:00
Scott Lahteine	83d42f33e1	Add HAS_HOTEND_OFFSET_Z conditional	2018-05-19 17:05:15 -05:00
GMagician	3c76bda2d8	Fix switching extruder `DONT_SWITCH` got lost along the way. Replace it with `DO_SWITCH_EXTRUDER` and adjust the code.	2018-05-19 17:05:15 -05:00
Scott Lahteine	c173a31060	Fix some compile warnings	2018-05-19 16:54:48 -05:00
Giuliano	e1d9046efc	[2.0.x] Temperature reading fix (#10774 )	2018-05-19 15:39:36 -05:00
Chris Pepper	9b64fdbc3a	[LPC176x] HAL: Add missing program space definition (#10776 )	2018-05-19 15:37:54 -05:00
Scott Lahteine	50270b53a0	Clear up some more compile warnings	2018-05-17 18:40:49 -05:00
etagle	06fd4d7b28	Improve NOMORE, NOLESS, and LIMIT macros	2018-05-17 18:23:14 -05:00
etagle	40d7e12827	Removing warnings from compilation	2018-05-17 18:04:22 -05:00
Scott Lahteine	0755fe8ba2	Add FAN_MAX_PWM to example configs	2018-05-15 21:18:47 -05:00
Jiri Jaburek	43ddb29f9e	Add FAN_MAX_PWM for M106-controlled fans	2018-05-15 21:18:46 -05:00
Scott Lahteine	0ea60d506a	Clear up LCD-related compile issues	2018-05-15 00:06:59 -05:00
Scott Lahteine	eb2eb72720	Modify UBL mesh_is_valid and use in leveling_is_valid (#10746 )	2018-05-14 22:36:03 -05:00
Scott Lahteine	b7dfc79988	Disable SERIAL_PORT_2 by default and sanity-check it (#10748 )	2018-05-14 21:38:24 -05:00
Scott Lahteine	3f6073e23a	Followup tweak to lcdprint_u8g.cpp	2018-05-14 14:42:11 -05:00
Scott Lahteine	fb608938f8	Prevent compilation of unused u8g-oriented code	2018-05-14 13:31:04 -05:00
Scott Lahteine	35258dd50b	Consistent heating status and status reset Fix #10699	2018-05-13 17:18:19 -05:00
Scott Lahteine	37b15fe4cf	Reorder HAL timer header items	2018-05-13 16:50:39 -05:00
Scott Lahteine	836b0bbeee	Fix MBL line_to_destination Fix #10708	2018-05-13 16:50:39 -05:00
Scott Lahteine	ba4c32eec5	Followup to _AXIS patch	2018-05-13 10:43:35 -05:00
Scott Lahteine	d9154ebdf6	Followup to math patch	2018-05-13 09:30:27 -05:00
Scott Lahteine	f07260c33f	Don't babystep on long click unless printing As pointed out in #10731	2018-05-13 08:11:35 -05:00
Scott Lahteine	883b0c9880	Convert custom maths to inlines (#10728 )	2018-05-13 08:10:08 -05:00
Scott Lahteine	08e36e264e	Apply _AXIS macro	2018-05-13 06:51:01 -05:00
Scott Lahteine	99ecdf59af	Smarter MIN, MAX, ABS macros Use macros that explicitly avoid double-evaluation and can be used for any datatype, replacing `min`, `max`, `abs`, `fabs`, `labs`, and `FABS`. Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-05-13 04:52:56 -05:00
Scott Lahteine	083ec9963e	Tweaks to heater / lcd conditions	2018-05-13 04:52:56 -05:00
etagle	9d98a62699	Followup to HAL optimizations and delays - Cleanups, fixes for Due HAL code. - TC_IER is write-only. Use TC_IMR to test ISR state.	2018-05-13 00:46:23 -05:00
Scott Lahteine	8f8c6a9bc4	Move get_axis_position_mm to Planner (#10718 )	2018-05-12 09:59:11 -05:00
Scott Lahteine	a1062eec5b	Better handling of DELAY_NS and DELAY_US (#10716 ) Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-05-12 08:34:04 -05:00
Scott Lahteine	f5aaa2d6c0	Fix some compiler warnings	2018-05-12 05:28:12 -05:00
Scott Lahteine	3614e6ce0f	Fix Switching Extruder with Linear Advance	2018-05-12 02:26:14 -05:00
Scott Lahteine	625035a9ce	Fix M301 access to lpq_len (#10714 ) Co-Authored-By: Zwaubel	2018-05-12 02:13:40 -05:00
etagle	1b225a2809	DUE: Emergency parser for the USB CDC	2018-05-12 02:12:11 -05:00
Scott Lahteine	306f0f2135	Move Stepper::synchronize to Planner (#10713 ) Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-05-12 01:38:02 -05:00
Scott Lahteine	f2e3c9896e	Fix compile warnings in backtrace Part of #10688 Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-05-11 23:38:29 -05:00
Scott Lahteine	acacee80a2	Add JUNCTION_ACCELERATION_FACTOR to configs Part of #10688 Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-05-11 23:13:27 -05:00
Giuliano	d99f1b2245	[2.0.x] EEPROM code cleanup (#10710 )	2018-05-11 18:06:04 -05:00
ManuelMcLure	8679f671ed	Remove dependency on PI. (#10701 )	2018-05-11 17:55:56 -05:00
Scott Lahteine	6671c064cd	Use arc moves for G26 if enabled (#10696 ) Co-Authored-By: ManuelMcLure <manuelmclure@users.noreply.github.com>	2018-05-11 02:15:14 -05:00
Scott Lahteine	325bbbc8c2	[2.0.x] Enable AD595 and AD8495 in concert (#10693 ) * Allow both AD595 and AD8495 in concert * General temperature code tweaks	2018-05-11 01:01:51 -05:00
Scott Lahteine	c43235dd39	Remove non-special comments	2018-05-11 00:36:04 -05:00
ManuelMcLure	613a3be167	Remove hidden dependencies on destination. Fixes #10686 . (#10691 )	2018-05-11 00:30:51 -05:00

... 22 23 24 25 26 ...

10986 commits